This commit adds basic support for the Bosch Sensortec BMA220 digital triaxial acceleration sensor. The device datasheet can be found here: http://www.mouser.com/pdfdocs/BSTBMA220DS00308.PDF Includes: - raw readings - ACPI detection - power management Signed-off-by: Tiberiu Breana <tiberiu.a.breana@xxxxxxxxx> --- drivers/iio/accel/Kconfig | 10 ++ drivers/iio/accel/Makefile | 1 + drivers/iio/accel/bma220_spi.c | 277 +++++++++++++++++++++++++++++++++++++++++ 3 files changed, 288 insertions(+) create mode 100644 drivers/iio/accel/bma220_spi.c diff --git a/drivers/iio/accel/Kconfig b/drivers/iio/accel/Kconfig index e4a758c..98740c7 100644 --- a/drivers/iio/accel/Kconfig +++ b/drivers/iio/accel/Kconfig @@ -17,6 +17,16 @@ config BMA180 To compile this driver as a module, choose M here: the module will be called bma180. +config BMA220 + tristate "Bosch BMA220 3-Axis Accelerometer Driver" + depends on SPI + help + Say yes here to add support for the Bosch BMA220 triaxial + acceleration sensor. + + To compile this driver as a module, choose M here: the + module will be called bma220_spi. + config BMC150_ACCEL tristate "Bosch BMC150 Accelerometer Driver" select IIO_BUFFER diff --git a/drivers/iio/accel/Makefile b/drivers/iio/accel/Makefile index 71b6794..9ae7820e 100644 --- a/drivers/iio/accel/Makefile +++ b/drivers/iio/accel/Makefile @@ -4,6 +4,7 @@ # When adding new entries keep the list in alphabetical order obj-$(CONFIG_BMA180) += bma180.o +obj-$(CONFIG_BMA220) += bma220_spi.o obj-$(CONFIG_BMC150_ACCEL) += bmc150-accel-core.o obj-$(CONFIG_BMC150_ACCEL_I2C) += bmc150-accel-i2c.o obj-$(CONFIG_BMC150_ACCEL_SPI) += bmc150-accel-spi.o diff --git a/drivers/iio/accel/bma220_spi.c b/drivers/iio/accel/bma220_spi.c new file mode 100644 index 0000000..7343575 --- /dev/null +++ b/drivers/iio/accel/bma220_spi.c @@ -0,0 +1,277 @@ +/** + * BMA220 Digital triaxial acceleration sensor driver + * + * Copyright (c) 2016, Intel Corporation. + * + * This file is subject to the terms and conditions of version 2 of + * the GNU General Public License. See the file COPYING in the main + * directory of this archive for more details. + */ + +#include <linux/acpi.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> +#include <linux/spi/spi.h> + +#define BMA220_REG_ID 0x00 +#define BMA220_REG_ACCEL_X 0x02 +#define BMA220_REG_ACCEL_Y 0x03 +#define BMA220_REG_ACCEL_Z 0x04 +#define BMA220_REG_RANGE 0x11 +#define BMA220_REG_SUSPEND 0x18 + +#define BMA220_CHIP_ID 0xDD +#define BMA220_READ_MASK 0x80 +#define BMA220_RANGE_MASK 0x03 +#define BMA220_DATA_SHIFT 2 +#define BMA220_SUSPEND_SLEEP 0xFF +#define BMA220_SUSPEND_WAKE 0x00 + +#define BMA220_DEVICE_NAME "bma220" +#define BMA220_SCALE_AVAILABLE "0.623 1.248 2.491 4.983" + +#define BMA220_ACCEL_CHANNEL(index, reg, axis) { \ + .type = IIO_ACCEL, \ + .address = reg, \ + .modified = 1, \ + .channel2 = IIO_MOD_##axis, \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \ +} + +static IIO_CONST_ATTR(in_accel_scale_available, BMA220_SCALE_AVAILABLE); + +static struct attribute *bma220_attributes[] = { + &iio_const_attr_in_accel_scale_available.dev_attr.attr, + NULL, +}; + +static const struct attribute_group bma220_attribute_group = { + .attrs = bma220_attributes, +}; + +static const int bma220_scale_table[][4] = { + {0, 623000}, {1, 248000}, {2, 491000}, {4, 983000} +}; + +struct bma220_data { + struct spi_device *spi_device; + struct mutex lock; + u8 tx_buf[2] ____cacheline_aligned; +}; + +static const struct iio_chan_spec bma220_channels[] = { + BMA220_ACCEL_CHANNEL(0, BMA220_REG_ACCEL_X, X), + BMA220_ACCEL_CHANNEL(1, BMA220_REG_ACCEL_Y, Y), + BMA220_ACCEL_CHANNEL(2, BMA220_REG_ACCEL_Z, Z), +}; + +static inline int bma220_read_reg(struct spi_device *spi, u8 reg) +{ + return spi_w8r8(spi, reg | BMA220_READ_MASK); +} + +static int bma220_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, int *val2, long mask) +{ + int ret; + u8 range_idx; + struct bma220_data *data = iio_priv(indio_dev); + + switch (mask) { + case IIO_CHAN_INFO_RAW: + ret = bma220_read_reg(data->spi_device, chan->address); + if (ret < 0) + return -EINVAL; + *val = sign_extend32(ret >> BMA220_DATA_SHIFT, 5); + return IIO_VAL_INT; + case IIO_CHAN_INFO_SCALE: + ret = bma220_read_reg(data->spi_device, BMA220_REG_RANGE); + if (ret < 0) + return ret; + range_idx = ret & BMA220_RANGE_MASK; + *val = bma220_scale_table[range_idx][0]; + *val2 = bma220_scale_table[range_idx][1]; + return IIO_VAL_INT_PLUS_MICRO; + } + + return -EINVAL; +} + +static int bma220_write_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int val, int val2, long mask) +{ + int i; + int ret; + int index = -1; + struct bma220_data *data = iio_priv(indio_dev); + + switch (mask) { + case IIO_CHAN_INFO_SCALE: + for (i = 0; i < ARRAY_SIZE(bma220_scale_table); i++) + if (val == bma220_scale_table[i][0] && + val2 == bma220_scale_table[i][1]) { + index = i; + break; + } + if (index < 0) + return -EINVAL; + + mutex_lock(&data->lock); + data->tx_buf[0] = BMA220_REG_RANGE; + data->tx_buf[1] = index; + ret = spi_write(data->spi_device, data->tx_buf, + sizeof(data->tx_buf)); + if (ret < 0) + dev_err(&data->spi_device->dev, + "failed to set measurement range\n"); + mutex_unlock(&data->lock); + + return 0; + } + + return -EINVAL; +} + +static const struct iio_info bma220_info = { + .driver_module = THIS_MODULE, + .read_raw = bma220_read_raw, + .write_raw = bma220_write_raw, + .attrs = &bma220_attribute_group, +}; + +static int bma220_init(struct spi_device *spi) +{ + int ret; + + ret = bma220_read_reg(spi, BMA220_REG_ID); + if (ret != BMA220_CHIP_ID) + return -ENODEV; + + /* Make sure the chip is powered on */ + ret = bma220_read_reg(spi, BMA220_REG_SUSPEND); + if (ret < 0) + return ret; + else if (ret == BMA220_SUSPEND_WAKE) + return bma220_read_reg(spi, BMA220_REG_SUSPEND); + + return 0; +} + +static int bma220_deinit(struct spi_device *spi) +{ + int ret; + + /* Make sure the chip is powered off */ + ret = bma220_read_reg(spi, BMA220_REG_SUSPEND); + if (ret < 0) + return ret; + else if (ret == BMA220_SUSPEND_SLEEP) + return bma220_read_reg(spi, BMA220_REG_SUSPEND); + + return 0; +} + +static int bma220_probe(struct spi_device *spi) +{ + int ret; + struct iio_dev *indio_dev; + struct bma220_data *data; + + indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*data)); + if (!indio_dev) { + dev_err(&spi->dev, "iio allocation failed!\n"); + return -ENOMEM; + } + + data = iio_priv(indio_dev); + data->spi_device = spi; + spi_set_drvdata(spi, indio_dev); + mutex_init(&data->lock); + + indio_dev->dev.parent = &spi->dev; + indio_dev->info = &bma220_info; + indio_dev->name = BMA220_DEVICE_NAME; + indio_dev->modes = INDIO_DIRECT_MODE; + indio_dev->channels = bma220_channels; + indio_dev->num_channels = ARRAY_SIZE(bma220_channels); + + ret = bma220_init(data->spi_device); + if (ret < 0) + return ret; + + ret = iio_device_register(indio_dev); + if (ret < 0) { + dev_err(&spi->dev, "iio_device_register failed\n"); + return bma220_deinit(spi); + } + + return ret; +} + +static int bma220_remove(struct spi_device *spi) +{ + struct iio_dev *indio_dev = spi_get_drvdata(spi); + + iio_device_unregister(indio_dev); + + return bma220_deinit(spi); +} + +#ifdef CONFIG_PM_SLEEP +static int bma220_suspend(struct device *dev) +{ + struct bma220_data *data = + iio_priv(spi_get_drvdata(to_spi_device(dev))); + + /* The chip can be suspended/woken up by a simple register read. */ + return bma220_read_reg(data->spi_device, BMA220_REG_SUSPEND); +} + +static int bma220_resume(struct device *dev) +{ + struct bma220_data *data = + iio_priv(spi_get_drvdata(to_spi_device(dev))); + + return bma220_read_reg(data->spi_device, BMA220_REG_SUSPEND); +} + +static SIMPLE_DEV_PM_OPS(bma220_pm_ops, bma220_suspend, bma220_resume); + +#define BMA220_PM_OPS (&bma220_pm_ops) +#else +#define BMA220_PM_OPS NULL +#endif + +static const struct spi_device_id bma220_spi_id[] = { + {"bma220", 0}, + {} +}; + +static const struct acpi_device_id bma220_acpi_id[] = { + {"BMA0220", 0}, + {} +}; + +MODULE_DEVICE_TABLE(spi, bma220_spi_id); + +static struct spi_driver bma220_driver = { + .driver = { + .name = "bma220_spi", + .pm = BMA220_PM_OPS, + .acpi_match_table = ACPI_PTR(bma220_acpi_id), + }, + .probe = bma220_probe, + .remove = bma220_remove, + .id_table = bma220_spi_id, +}; + +module_spi_driver(bma220_driver); + +MODULE_AUTHOR("Tiberiu Breana <tiberiu.a.breana@xxxxxxxxx>"); +MODULE_DESCRIPTION("BMA220 acceleration sensor driver"); +MODULE_LICENSE("GPL v2"); -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe linux-iio" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
