Linux Kernel I2C Bus Layer
[Prev Page][Next Page]
[Patch v2] power/mpc85xx: Add delay after enabling I2C master,
York Sun
Re: [PATCH 1/4 v2] mfd: add STw481x driver,
Linus Walleij
[PATCH 0/9] of/irq: Defer interrupt reference resolution,
Thierry Reding
- [PATCH 8/9] of/i2c: Resolve interrupt references at probe time, Thierry Reding
- [PATCH 9/9] gpio: tegra: Use module_platform_driver(), Thierry Reding
- [PATCH 6/9] of/irq: Propagate errors in of_irq_to_resource_table(), Thierry Reding
- [PATCH 7/9] of/platform: Resolve interrupt references at probe time, Thierry Reding
- [PATCH 4/9] of/irq: Introduce of_irq_get(), Thierry Reding
- [PATCH 5/9] of/irq: Introduce __of_irq_to_resource(), Thierry Reding
- [PATCH 3/9] irqdomain: Introduce __irq_create_of_mapping(), Thierry Reding
- [PATCH 1/9] of/irq: Rework of_irq_count(), Thierry Reding
- [PATCH 2/9] irqdomain: Introduce __irq_create_mapping(), Thierry Reding
- Re: [PATCH 0/9] of/irq: Defer interrupt reference resolution, Alexandre Belloni
[PATCH v2 0/5] i2c: rcar: Device Tree support and clock improvements,
Guennadi Liakhovetski
[PATCH v2 0/9] runtime PM support for I2C and SPI client devices,
Mika Westerberg
- [PATCH v2 8/9] spi: prepare runtime PM support for SPI devices, Mika Westerberg
- [PATCH v2 5/9] drivers/misc: convert existing I2C clients driver to use I2C core runtime PM, Mika Westerberg
- [PATCH v2 9/9] spi: attach/detach SPI device to the ACPI power domain, Mika Westerberg
- [PATCH v2 1/9] i2c: prepare runtime PM support for I2C client devices, Mika Westerberg
- [PATCH v2 6/9] mfd: wm8994: convert to use I2C core runtime PM, Mika Westerberg
- [PATCH v2 7/9] ASoC: codecs: convert existing I2C client drivers to use I2C core runtime PM, Mika Westerberg
- [PATCH v2 2/9] i2c: attach/detach I2C client device to the ACPI power domain, Mika Westerberg
- [PATCH v2 4/9] [media] s5p-tv: convert to use I2C core runtime PM, Mika Westerberg
- [PATCH v2 3/9] Input: misc - convert existing I2C client drivers to use I2C core runtime PM, Mika Westerberg
- Re: [PATCH v2 0/9] runtime PM support for I2C and SPI client devices, Mark Brown
[PATCH] i2c: imx: retry on NAK,
Luka Perkov
[PATCH 0/5] i2c: rcar: Device Tree support and clock improvements,
Guennadi Liakhovetski
[PATCH RESEND 0/2] runtime PM support for I2C clients,
Mika Westerberg
[PATCH 1/2] i2c: xiic: Remove casting the return value which is a void pointer,
Jingoo Han
[PATCH 4/7] power/mpc85xx: Add delay after enabling I2C master, York Sun
[PATCH] i2c: davinci: Fix bad dev_get_platdata() conversion,
Olof Johansson
[PULL REQUEST] i2c for 3.12,
Wolfram Sang
RFC - EEPROM device class, Curt Brune
[Patch v3]EMMA I2C driver,
Ian Molton
Re: [PATCH] MIPS: sead3: Select NEW_LEDS, LEDS_CLASS and I2C symbols,
Ralf Baechle
[PATCH v4 0/1 resend] ARM: shmobile: r8a7790: add I2C support,
Nguyen Viet Dung
[PATCH] i2c: i2c-dev: Create 'name' attribute automatically,
Guenter Roeck
[PATCH 1/2] i2c: qup: Add device tree bindings information,
Ivan T. Ivanov
Re: [PATCH 1/2] i2c: qup: Add device tree bindings information, Mark Rutland
[PATCH v4 0/1] ARM: shmobile: r8a7790: add I2C support,
Nguyen Viet Dung
[PATCH] EMMA: Add em i2c driver,
y
[PATCH v3 0/1 resend] ARM: shmobile: r8a7790: add I2C support,
Nguyen Viet Dung
[PATCH] misc: (at24) move header to linux/platform_data/,
Vivien Didelot
[PATCH] i2c: mpc: cleanup clock API use,
Anatolij Gustschin
[PATCH] i2c: ismt: add error return code in probe(),
Wolfram Sang
[PATCH v7] ARM: dts: mvebu: Introduce a new compatible string for mv64xxx-i2c,
Gregory CLEMENT
[PATCH] i2c-pnx: fix error return code in i2c_pnx_probe(),
Wei Yongjun
[PATCH V3] i2c: move of helpers into the core,
Wolfram Sang
[PATCH v6 3/4] ARM: dts: mvebu: Introduce a new compatible string for mv64xxx-i2c,
Gregory CLEMENT
[PATCH v6 1/4] i2c-mv64xxx: Add I2C Transaction Generator support,
Gregory CLEMENT
[PATCH v6 0/4] i2c-mv64xxx: Fixes and new feature for controlers embedded in Aramda XP, Gregory CLEMENT
[PATCH v2] i2c: move ACPI helpers into the core,
Mika Westerberg
[PATCH V2] i2c: move of helpers into the core,
Wolfram Sang
Re: passing two interrupts two an I2C driver,
Pawel Moll
[PATCH v3 0/1] ARM: shmobile: r8a7790: add I2C support,
Nguyen Viet Dung
[PATCH v2] i2c: imx: use exact SoC revision to document binding,
Jingchang Lu
[RFC PATCH 0/2] runtime PM support for I2C clients,
Mika Westerberg
[PATCH] i2c: imx: use exact SoC revision document binding,
Jingchang Lu
[PATCH RESEND] i2c: designware: use module_platform_driver,
Zhangfei Gao
Re: [PATCH] i2c: move of helpers into the core,
Rafael J. Wysocki
[PATCH RESEND] i2c: move of helpers into the core,
Wolfram Sang
[PATCH] i2c: powermac: fix return path on error,
Wolfram Sang
[PATCH v2 1/2] i2c-designware: make HCNT/LCNT values configurable,
Mika Westerberg
[PATCH RESEND] ARM: dts: vf610-twr: enable i2c0 device,
Jingchang Lu
[PATCH 0/29] simplify use of devm_ioremap_resource,
Julia Lawall
[PATCH 0/5] i2c: sirf: a bundle of fixes for stability,
Barry Song
[PATCH v5 0/3] i2c-mv64xxx: Fixes and new feature for controlers embedded in Aramda XP,
Gregory CLEMENT
[PATCH v2 2/2] i2c: pxa: enable high speed mode for i2c bus,
Leilei Shang
[PATCH v2 1/2] i2c: pxa: add pxa910 platform for i2c bus, Leilei Shang
PCA9665: Triggering i2c bus reset, Nuno Silva
[PATCH 1/1] Documentation: i2c: Fix example in instantiating-devices,
Sachin Kamat
Re:, Western Union
i2c-i801 driver quit working in 3.8.11 (was: adt7475 driver quit working),
Guenter Roeck
[PATCH 1/1] i2c: imx: Fix incorrect placement of __initdata,
Sachin Kamat
[PATCH 1/8] i2c: imx: use struct representing i2c clk{div, val} pair,
Jingchang Lu
- [PATCH 2/8] i2c: imx: enable clk before write to registers, Jingchang Lu
- [PATCH 3/8] i2c: imx: don't change platform device id_entry directly, Jingchang Lu
- [PATCH 4/8] i2c: imx: wrap registers read/write to inline function, Jingchang Lu
- [PATCH 5/8] i2c: imx: change register offset representation, Jingchang Lu
- [PATCH 6/8] i2c: imx: add INT flag and IEN bit operatation codes, Jingchang Lu
- [PATCH 7/8] i2c: imx: add struct to hold more configurable quirks, Jingchang Lu
- [PATCH 8/8] i2c: imx: Add Vybrid VF610 I2C controller support, Jingchang Lu
- Re: [PATCH 1/8] i2c: imx: use struct representing i2c clk{div, val} pair, Sascha Hauer
- Re: [PATCH 1/8] i2c: imx: use struct representing i2c clk{div, val} pair, Wolfram Sang
[PATCH] i2c-tiny-usb: do not use stack as URB transfer_buffer,
Jussi Kivilinna
[PATCH RESEND 1/2] ARM: dts: vf610-twr: enable i2c0 device,
Jingchang Lu
Re: [PATCH RESEND 1/2] ARM: dts: vf610-twr: enable i2c0 device, Shawn Guo
[PATCH] i2c: add sanity check to i2c_put_adapter,
Sebastian Hesselbarth
[PATCH RESEND 1/3] i2c: mxs: distinguish i.MX23 and i.MX28 based I2C controller,
Marek Vasut
[PATCH 05/35] i2c: use dev_get_platdata(),
Jingoo Han
PC to PC link via i2c on nvidia (VGA) cards. Is it possible in theory?, Hiroto Takahashi
[PATCH v4 0/2] support hisilicon i2c,
Zhangfei Gao
[PATCH] i2c: Fix Kontron PLD prescaler calculation,
Michael Brunner
[PATCH v2 0/1 resend] ARM: shmobile: r8a7790: add I2C support,
Nguyen Viet Dung
[PATCH 0/2] i2c: davinci: Couple of patches to make i2c usable on Keystone SOCs,
Santosh Shilimkar
i2c-mux: expose i2c bus topology under sysfs, Jeroen De Wachter
[PATCH 06/27] drivers/i2c/busses: don't check resource with devm_ioremap_resource,
Wolfram Sang
[PATCH v4 0/2] iMC SMBUS and DIMM bus probing,
Andy Lutomirski
[PATCH 1/3] i2c: mxs: distinguish i.MX23 and i.MX28 based I2C controller,
Marek Vasut
[PATCH v3 0/4] iMC SMBUS, TSOD hwmon devices, and eeprom modalias,
Andy Lutomirski
[PATCH] i2c: Improve logging on failure to probe for ->class devices,
Andy Lutomirski
What endianness is word in i2c_smbus_data?,
Andy Lutomirski
[PATCH v2 0/2] New driver: i2c_imc (Intel LGA2011 iMC SMBUS),
Andy Lutomirski
[PATCH] i2c-omap: always send stop after nack,
Hein Tibosch
piix4_smbus: How to deal with conflicting ACPI regions?, Paul Menzel
[PATCH 0/3] i2c-mv64xxx: Fixes and new feature for controlers embedded in Aramda XP,
Gregory CLEMENT
[PATCH V2 7/7] i2c: i2c-bfin-twi: add CONFIG_PM_SLEEP to suspend/resume functions, Jingoo Han
[PATCH V2 6/7] i2c: puv3: add CONFIG_PM_SLEEP to suspend function, Jingoo Han
[PATCH V2 5/7] i2c: pnx: add CONFIG_PM_SLEEP to suspend/resume functions, Jingoo Han
[PATCH V2 4/7] i2c: stu300: add CONFIG_PM_SLEEP to suspend/resume functions, Jingoo Han
[PATCH V2 3/7] i2c: ocores: add CONFIG_PM_SLEEP to suspend/resume functions, Jingoo Han
[PATCH V2 2/7] i2c: designware: add CONFIG_PM_SLEEP to suspend/resume functions, Jingoo Han
[PATCH V2 1/7] i2c: i2c-mpc: add CONFIG_PM_SLEEP to suspend/resume functions,
Jingoo Han
[PATCH v2] i2c: i2c-mxs: Check the return value from stmp_reset_block(),
Fabio Estevam
[PATCH] i2c: i2c-mxs: Check the return value from stmp_reset_block(),
Fabio Estevam
Temporarily disabling SNB package C-states?, Andy Lutomirski
[PATCH] i2c: mpc: Define unique I2C adapter names,
Guenter Roeck
[PATCH 02/12] drivers/i2c/busses: don't use devm_pinctrl_get_select_default() in probe,
Wolfram Sang
[PATCH v2 0/1] ARM: shmobile: r8a7790: add I2C support,
Nguyen Viet Dung
Re: [lm-sensors] Bug Report: Bus substitution causing a problem,
Guenter Roeck
[PATCH] i2c: mxs: Rework the PIO mode operation,
Marek Vasut
[PATCH 1/2] i2c-designware: make *CNT values configurable,
Mika Westerberg
- [PATCH 2/2] i2c-designware: configure *CNT values from ACPI, Mika Westerberg
- Re: [PATCH 1/2] i2c-designware: make *CNT values configurable, Christian Ruppert
- Re: [PATCH 1/2] i2c-designware: make *CNT values configurable, Mika Westerberg
- Re: [PATCH 1/2] i2c-designware: make *CNT values configurable, Christian Ruppert
- Re: [PATCH 1/2] i2c-designware: make *CNT values configurable, Mika Westerberg
- Re: [PATCH 1/2] i2c-designware: make *CNT values configurable, Christian Ruppert
- Re: [PATCH 1/2] i2c-designware: make *CNT values configurable, Mika Westerberg
- Re: [PATCH 1/2] i2c-designware: make *CNT values configurable, Mika Westerberg
- Re: [PATCH 1/2] i2c-designware: make *CNT values configurable, Shinya Kuribayashi
- Re: [PATCH 1/2] i2c-designware: make *CNT values configurable, Mika Westerberg
- Re: [PATCH 1/2] i2c-designware: make *CNT values configurable, Shinya Kuribayashi
- Re: [PATCH 1/2] i2c-designware: make *CNT values configurable, Christian Ruppert
- Re: [PATCH 1/2] i2c-designware: make *CNT values configurable, Shinya Kuribayashi
- Re: [PATCH 1/2] i2c-designware: make *CNT values configurable, Christian Ruppert
- Re: [PATCH 1/2] i2c-designware: make *CNT values configurable, Shinya Kuribayashi
- Re: [PATCH 1/2] i2c-designware: make *CNT values configurable, Christian Ruppert
- Re: [PATCH 1/2] i2c-designware: make *CNT values configurable, Wolfram Sang
- Re: [PATCH 1/2] i2c-designware: make *CNT values configurable, Christian Ruppert
- Re: [PATCH 1/2] i2c-designware: make *CNT values configurable, Wolfram Sang
- Re: [PATCH 1/2] i2c-designware: make *CNT values configurable, Shinya Kuribayashi
- Re: [PATCH 1/2] i2c-designware: make *CNT values configurable, Mika Westerberg
- Re: [PATCH 1/2] i2c-designware: make *CNT values configurable, Shinya Kuribayashi
- Re: [PATCH 1/2] i2c-designware: make *CNT values configurable, Christian Ruppert
- Re: [PATCH 1/2] i2c-designware: make *CNT values configurable, Shinya Kuribayashi
- Re: [PATCH 1/2] i2c-designware: make *CNT values configurable, Christian Ruppert
- [PATCH 1/2] i2c designware make SCL and SDA falling time configurable, Romain Baeriswyl
- Re: [PATCH 1/2] i2c designware make SCL and SDA falling time configurable, Mika Westerberg
- Re: [PATCH 1/2] i2c designware make SCL and SDA falling time configurable, Ryan Mallon
- Re: [PATCH 1/2] i2c designware make SCL and SDA falling time configurable, Shinya Kuribayashi
- Re: [PATCH 1/2] i2c designware make SCL and SDA falling time configurable, Wolfram Sang
- [PATCH v2 1/2] i2c designware make SCL and SDA falling time configurable, Romain Baeriswyl
- Re: [PATCH v2 1/2] i2c designware make SCL and SDA falling time configurable, Wolfram Sang
- [PATCH 2/2] i2c designware add support of I2C standard mode, Romain Baeriswyl
- Re: [PATCH 2/2] i2c designware add support of I2C standard mode, Mika Westerberg
- Re: [PATCH 2/2] i2c designware add support of I2C standard mode, Shinya Kuribayashi
- Re: [PATCH 2/2] i2c designware add support of I2C standard mode, Wolfram Sang
- [PATCH v2 2/2] i2c designware add support of I2C standard mode, Romain Baeriswyl
- Re: [PATCH v2 2/2] i2c designware add support of I2C standard mode, Wolfram Sang
- Re: [PATCH 1/2] i2c-designware: make *CNT values configurable, Mika Westerberg
Re: MTD EEPROM support and driver integration,
Arnd Bergmann
[Index of Archives]
[Linux USB Devel]
[Video for Linux]
[Big List of Linux Books]
[Linux SCSI]
[Yosemite Forum]
