From: Fabio Estevam <fabio.estevam@xxxxxxxxxxxxx>
stmp_reset_block() may fail, so let's check its return value and propagate it in
the case of error.
Signed-off-by: Fabio Estevam <fabio.estevam@xxxxxxxxxxxxx>
---
drivers/i2c/busses/i2c-mxs.c | 12 +++++++++---
1 file changed, 9 insertions(+), 3 deletions(-)
diff --git a/drivers/i2c/busses/i2c-mxs.c b/drivers/i2c/busses/i2c-mxs.c
index df8ff5a..1891ae7 100644
--- a/drivers/i2c/busses/i2c-mxs.c
+++ b/drivers/i2c/busses/i2c-mxs.c
@@ -123,9 +123,11 @@ struct mxs_i2c_dev {
bool dma_read;
};
-static void mxs_i2c_reset(struct mxs_i2c_dev *i2c)
+static int mxs_i2c_reset(struct mxs_i2c_dev *i2c)
{
- stmp_reset_block(i2c->regs);
+ int ret = stmp_reset_block(i2c->regs);
+ if (ret)
+ return ret;
/*
* Configure timing for the I2C block. The I2C TIMING2 register has to
@@ -139,6 +141,8 @@ static void mxs_i2c_reset(struct mxs_i2c_dev *i2c)
writel(0x00300030, i2c->regs + MXS_I2C_TIMING2);
writel(MXS_I2C_IRQ_MASK << 8, i2c->regs + MXS_I2C_CTRL1_SET);
+
+ return 0;
}
static void mxs_i2c_dma_finish(struct mxs_i2c_dev *i2c)
@@ -683,7 +687,9 @@ static int mxs_i2c_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, i2c);
/* Do reset to enforce correct startup after pinmuxing */
- mxs_i2c_reset(i2c);
+ err = mxs_i2c_reset(i2c);
+ if (err)
+ return err;
adap = &i2c->adapter;
strlcpy(adap->name, "MXS I2C adapter", sizeof(adap->name));
--
1.8.1.2
--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
