On Fri, Jul 26, 2013 at 02:22:18PM +0100, Zhangfei Gao wrote: > Some platform can not get fifo-size info form register DW_IC_COMP_PARAM_1. s/form/from/ Why can they not get info from the register? Is it not implemented, or buggy? It would be nice to mention why. > Give chance to update rx-fifo-size and tx-fifo-size if provided in dts. > > Signed-off-by: Zhangfei Gao <zhangfei.gao@xxxxxxxxxx> > Acked-by: Baruch Siach <baruch@xxxxxxxxxx> > --- > .../devicetree/bindings/i2c/i2c-designware.txt | 7 +++++++ > drivers/i2c/busses/i2c-designware-platdrv.c | 3 +++ > 2 files changed, 10 insertions(+) > > diff --git a/Documentation/devicetree/bindings/i2c/i2c-designware.txt b/Documentation/devicetree/bindings/i2c/i2c-designware.txt > index 7fd7fa2..af0bf8f 100644 > --- a/Documentation/devicetree/bindings/i2c/i2c-designware.txt > +++ b/Documentation/devicetree/bindings/i2c/i2c-designware.txt > @@ -6,6 +6,11 @@ Required properties : > - reg : Offset and length of the register set for the device > - interrupts : <IRQ> where IRQ is the interrupt number. > > +Optional properties: > + > + - rx-fifo-size : 1 cell, Rx fifo size > + - tx-fifo-size : 1 cell, Tx fifo size Units? I assume these are in bytes? It would be nice to mention in the bidning when you need these properties (i.e. only hwen you can't figure it out from DW_IC_COMP_PARAM_1 becase ________. Thanks, Mark. -- To unsubscribe from this list: send the line "unsubscribe linux-i2c" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
