Re: [PATCH v2 1/9] i2c: prepare runtime PM support for I2C client devices

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Sep 12, 2013 at 02:34:21PM -0700, Kevin Hilman wrote:
> > diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c
> > index f32ca29..44374b4 100644
> > --- a/drivers/i2c/i2c-core.c
> > +++ b/drivers/i2c/i2c-core.c
> > @@ -248,11 +248,30 @@ static int i2c_device_probe(struct device *dev)
> >  					client->flags & I2C_CLIENT_WAKE);
> >  	dev_dbg(dev, "probe\n");
> >  
> > +	/* Make sure the adapter is active */
> > +	pm_runtime_get_sync(&client->adapter->dev);
> > +
> > +	/*
> > +	 * Enable runtime PM for the client device. If the client wants to
> > +	 * participate on runtime PM it should call pm_runtime_put() in its
> > +	 * probe() callback.
> > +	 */
> > +	pm_runtime_get_noresume(&client->dev);
> > +	pm_runtime_set_active(&client->dev);
> 
> Why the set_active here?
> 
> For hardware that is disabled/powered-off on startup, there will now be
> a mismatch between the hardware state an the RPM core state.

The call to pm_runtime_get_noresume() should make sure that the device is
in active state (at least in state where it can access the bus) if I'm
understanding this right.
--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux