Linux Kernel I2C

• Thread Index

• [PATCH] i2c: slave: fix the example how to instantiate from userspace
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [Patch v2] driver/clk/clk-si5338: Add common clock framework driver for si5338
  • From: York Sun <yorksun@xxxxxxxxxxxxx>
• [PATCH-V2 12/12] Documentation: binding: add sclk adjustment properties to i2c-pxa
  • From: Vaibhav Hiremath <vaibhav.hiremath@xxxxxxxxxx>
• [PATCH-V2 11/12] i2c: pxa: Add ILCR (tLow & tHigh) configuration support
  • From: Vaibhav Hiremath <vaibhav.hiremath@xxxxxxxxxx>
• [PATCH-V2 10/12] i2c: pxa: Add support for pxa910/988 & new configuration features
  • From: Vaibhav Hiremath <vaibhav.hiremath@xxxxxxxxxx>
• [PATCH-V2 09/12] Documentation: binding: add new property 'disable_after_xfer' to i2c-pxa
  • From: Vaibhav Hiremath <vaibhav.hiremath@xxxxxxxxxx>
• [PATCH-V2 08/12] i2c: pxa: enable/disable i2c module across msg xfer
  • From: Vaibhav Hiremath <vaibhav.hiremath@xxxxxxxxxx>
• [PATCH-V2 07/12] i2c:pxa: Use devm_ variants in probe function
  • From: Vaibhav Hiremath <vaibhav.hiremath@xxxxxxxxxx>
• [PATCH-V2 06/12] i2c: pxa: Update debug function to dump more info on error
  • From: Vaibhav Hiremath <vaibhav.hiremath@xxxxxxxxxx>
• [PATCH-V2 05/12] i2c: pxa: Remove compile warnning in 64bit mode
  • From: Vaibhav Hiremath <vaibhav.hiremath@xxxxxxxxxx>
• [PATCH-V2 04/12] i2c: pxa: Reset i2c controller on timeout in interrupt and pio mode
  • From: Vaibhav Hiremath <vaibhav.hiremath@xxxxxxxxxx>
• [PATCH-V2 03/12] i2c: pxa: Return I2C_RETRY when timeout in pio mode
  • From: Vaibhav Hiremath <vaibhav.hiremath@xxxxxxxxxx>
• [PATCH-V2 02/12] i2c: pxa: No need to set slave addr for i2c master mode reset
  • From: Vaibhav Hiremath <vaibhav.hiremath@xxxxxxxxxx>
• [PATCH-V2 01/12] i2c: pxa: keep i2c irq ON in suspend
  • From: Vaibhav Hiremath <vaibhav.hiremath@xxxxxxxxxx>
• [PATCH-V2 00/12] i2c: pxa: Fixes, cleanup and support for pxa910 family
  • From: Vaibhav Hiremath <vaibhav.hiremath@xxxxxxxxxx>
• [PATCH 8/9] i2c: xiic: Remove the Addressed as slave interrupt
  • From: Shubhrajyoti Datta <shubhrajyoti.datta@xxxxxxxxxx>
• [PATCH 3/9] i2c: xiic: move the xiic_process to thread context
  • From: Shubhrajyoti Datta <shubhrajyoti.datta@xxxxxxxxxx>
• [PATCH 2/9] i2c: xiic: Remove the disabling of interrupts
  • From: Shubhrajyoti Datta <shubhrajyoti.datta@xxxxxxxxxx>
• [PATCH 6/9] i2c: xiic: Remove busy loop while waiting for bus busy
  • From: Shubhrajyoti Datta <shubhrajyoti.datta@xxxxxxxxxx>
• [PATCH 0/9] i2c: xiic: cleanups
  • From: Shubhrajyoti Datta <shubhrajyoti.datta@xxxxxxxxxx>
• [PATCH 7/9] i2c: xiic: Add a msg in case of timeout
  • From: Shubhrajyoti Datta <shubhrajyoti.datta@xxxxxxxxxx>
• [PATCH 9/9] i2c: xiic: Service all interrupts in isr
  • From: Shubhrajyoti Datta <shubhrajyoti.datta@xxxxxxxxxx>
• [PATCH 4/9] i2c: xiic: Do not reset controller before every transfer
  • From: Shubhrajyoti Datta <shubhrajyoti.datta@xxxxxxxxxx>
• [PATCH 1/9] i2c: xiic: Do not continue in case of errors in Rx
  • From: Shubhrajyoti Datta <shubhrajyoti.datta@xxxxxxxxxx>
• [PATCH 5/9] i2c: xiic: Remove the disabling of interrupts
  • From: Shubhrajyoti Datta <shubhrajyoti.datta@xxxxxxxxxx>
• Re: [PATCH V2 2/3] i2c-piix4: Use Macro for AMD CZ SMBus device ID
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH V2 2/3] i2c-piix4: Use Macro for AMD CZ SMBus device ID
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH V2 3/3] SDHCI: Change AMD SDHCI quirk application scope
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH V2 1/3] pci_ids: Add AMD KERNCZ device ID support
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH 00/21] On-demand device registration
  • From: Alexander Holler <holler@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: designware: use enable on resume instead initialization
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH v2] HID: support i2c write-read and large transfers in hid-cp2112
  • From: Antonio Borneo <borneo.antonio@xxxxxxxxx>
• Re: [PATCH 00/21] On-demand device registration
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 1/4] x86: Add basic support for the Congatec CGEB BIOS interface
  • From: Christian Gmeiner <christian.gmeiner@xxxxxxxxx>
• RE: [Patch v1] i2c: imx: add runtime pm support to improve the performance
  • From: Gao Pandy <gaopan@xxxxxxxxxxxxx>
• Re: [RFC PATCH 2/2] i2c: mux: pca954x: Use __i2c_transfer because of quirks
  • From: Jisheng Zhang <jszhang@xxxxxxxxxxx>
• Re: [RFC]: Supporting PIO mode of operation in i2c_msg->flags
  • From: Vaibhav Hiremath <vaibhav.hiremath@xxxxxxxxxx>
• [PATCH] driver/clk/clk-si5338: Add common clock framework driver for si5338
  • From: York Sun <yorksun@xxxxxxxxxxxxx>
• Re: [PATCH 00/21] On-demand device registration
  • From: Alexander Holler <holler@xxxxxxxxxxxxx>
• Re: I2C slave support on Xilinx Zybo
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: I2C slave support on Xilinx Zybo
  • From: Tim Bakker <bakkert@xxxxxxxxxxxxxx>
• Re: I2C slave support on Xilinx Zybo
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH v2] HID: support i2c write-read and large transfers in hid-cp2112
  • From: Ellen Wang <ellen@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: designware: use enable on resume instead initialization
  • From: Lucas De Marchi <lucas.de.marchi@xxxxxxxxx>
• Re: [PATCH V2 1/3] pci_ids: Add AMD KERNCZ device ID support
  • From: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>
• Re: [RFC PATCH 2/2] i2c: mux: pca954x: Use __i2c_transfer because of quirks
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• [RFC PATCH] i2c: use parent adapter quirks in mux
  • From: Alexander Sverdlin <alexander.sverdlin@xxxxxxxxx>
• [RFC PATCH 2/2] i2c: mux: pca954x: Use __i2c_transfer because of quirks
  • From: Alexander Sverdlin <alexander.sverdlin@xxxxxxxxx>
• [PATCH 1/2] i2c: mux: Use __i2c_transfer() instead of calling parent's master_xfer()
  • From: Alexander Sverdlin <alexander.sverdlin@xxxxxxxxx>
• Re: [PATCH] i2c: octeon: remove unused signal handling
  • From: Alexander Sverdlin <alexander.sverdlin@xxxxxxxxx>
• Re: [PATCH 00/21] On-demand device registration
  • From: Alexander Holler <holler@xxxxxxxxxxxxx>
• Re: [PATCH 00/21] On-demand device registration
  • From: Alexander Holler <holler@xxxxxxxxxxxxx>
• Re: [PATCH 2/4] i2c: Add Congatec CGEB I2C driver
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 1/4] x86: Add basic support for the Congatec CGEB BIOS interface
  • From: Paul Bolle <pebolle@xxxxxxxxxx>
• Re: [PATCH 00/21] On-demand device registration
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH] i2c-parport: start using pr_fmt
  • From: Sudip Mukherjee <sudipm.mukherjee@xxxxxxxxx>
• Re: [RFC]: Supporting PIO mode of operation in i2c_msg->flags
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 3/4] watchdog: Add Congatec CGEB watchdog driver
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH 0/4] Add support for Congatec CGEB BIOS interface
  • From: Christian Gmeiner <christian.gmeiner@xxxxxxxxx>
• [PATCH 2/4] i2c: Add Congatec CGEB I2C driver
  • From: Christian Gmeiner <christian.gmeiner@xxxxxxxxx>
• [PATCH 4/4] backlight: Add Congatec CGEB backlight driver
  • From: Christian Gmeiner <christian.gmeiner@xxxxxxxxx>
• [PATCH 1/4] x86: Add basic support for the Congatec CGEB BIOS interface
  • From: Christian Gmeiner <christian.gmeiner@xxxxxxxxx>
• [PATCH 3/4] watchdog: Add Congatec CGEB watchdog driver
  • From: Christian Gmeiner <christian.gmeiner@xxxxxxxxx>
• Re: [RFC]: Supporting PIO mode of operation in i2c_msg->flags
  • From: Vaibhav Hiremath <vaibhav.hiremath@xxxxxxxxxx>
• Re: [PATCH 00/21] On-demand device registration
  • From: Alexander Holler <holler@xxxxxxxxxxxxx>
• [PATCH] i2c: mv64xxx: remove unreachable signal case handling
  • From: Nicholas Mc Guire <hofrat@xxxxxxxxx>
• Re: [PATCH] i2c: designware: use enable on resume instead initialization
  • From: Lucas De Marchi <lucas.demarchi@xxxxxxxxx>
• [PATCH] i2c: octeon: remove unused signal handling
  • From: Nicholas Mc Guire <hofrat@xxxxxxxxx>
• Re: [PATCH RFC] i2c: octeon: allow receiving of signals.
  • From: Nicholas Mc Guire <der.herr@xxxxxxx>
• Re: [PATCH RFC] i2c: octeon: allow receiving of signals.
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH RFC] i2c: octeon: allow receiving of signals.
  • From: Nicholas Mc Guire <hofrat@xxxxxxxxx>
• Re: [PATCH 1/1] i2c: at91: fix code checker warnings
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 00/21] On-demand device registration
  • From: Tomeu Vizoso <tomeu.vizoso@xxxxxxxxxxxxx>
• Re: [PATCH V2 2/3] i2c-piix4: Use Macro for AMD CZ SMBus device ID
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH V2 2/3] i2c-piix4: Use Macro for AMD CZ SMBus device ID
  • From: Wan ZongShun <Vincent.Wan@xxxxxxx>
• Re: [PATCH 00/21] On-demand device registration
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH V2 3/3] SDHCI: Change AMD SDHCI quirk application scope
  • From: Wan ZongShun <Vincent.Wan@xxxxxxx>
• [PATCH V2 1/3] pci_ids: Add AMD KERNCZ device ID support
  • From: Wan ZongShun <Vincent.Wan@xxxxxxx>
• Re: [PATCH 1/1] i2c: at91: fix code checker warnings
  • From: Ludovic Desroches <ludovic.desroches@xxxxxxxxx>
• Re: [PATCH 00/21] On-demand device registration
  • From: Alexander Holler <holler@xxxxxxxxxxxxx>
• Re: [PATCH 00/21] On-demand device registration
  • From: Alexander Holler <holler@xxxxxxxxxxxxx>
• RE: [Patch v1] i2c: imx: add runtime pm support to improve the performance
  • From: Duan Andy <fugang.duan@xxxxxxxxxxxxx>
• Re: [PATCH 00/21] On-demand device registration
  • From: Alexander Holler <holler@xxxxxxxxxxxxx>
• Re: [Patch v1] i2c: imx: add runtime pm support to improve the performance
  • From: Shubhrajyoti Datta <omaplinuxkernel@xxxxxxxxx>
• RE: [Patch v1] i2c: imx: add runtime pm support to improve the performance
  • From: Duan Andy <fugang.duan@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: designware: use enable on resume instead initialization
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• [PATCH] i2c: davinci: Optimize SCL generation
  • From: Alexander Sverdlin <alexander.sverdlin@xxxxxxxxx>
• Re: [Patch v1] i2c: imx: add runtime pm support to improve the performance
  • From: Shubhrajyoti Datta <omaplinuxkernel@xxxxxxxxx>
• Re: [PATCH 0/1] i2c: at91: fix code checker warnings
  • From: Cyrille Pitchen <cyrille.pitchen@xxxxxxxxx>
• [PATCH 1/1] i2c: at91: fix code checker warnings
  • From: Cyrille Pitchen <cyrille.pitchen@xxxxxxxxx>
• [PATCH 0/1] i2c: at91: fix code checker warnings
  • From: Cyrille Pitchen <cyrille.pitchen@xxxxxxxxx>
• Re: [PATCH 00/21] On-demand device registration
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 00/21] On-demand device registration
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 0/2] ARM: shmobile: r8a7740: move I2C errata handling into the driver
  • From: Simon Horman <horms@xxxxxxxxxxxx>
• [Patch v1] i2c: imx: add runtime pm support to improve the performance
  • From: Gao Pan <b54642@xxxxxxxxxxxxx>
• Re: [PATCH 0/2] ARM: shmobile: r8a7740: move I2C errata handling into the driver
  • From: Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxxxx>
• Re: I2C slave support on Xilinx Zybo
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: Mark instantiated device nodes with OF_POPULATE
  • From: Rob Herring <robherring2@xxxxxxxxx>
• Re: [PATCH] i2c: Mark instantiated device nodes with OF_POPULATE
  • From: Rob Herring <robherring2@xxxxxxxxx>
• Re: [PATCH] i2c: Mark instantiated device nodes with OF_POPULATE
  • From: Pantelis Antoniou <pantelis.antoniou@xxxxxxxxxxxx>
• Re: [PATCH] i2c: Mark instantiated device nodes with OF_POPULATE
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: Mark instantiated device nodes with OF_POPULATE
  • From: Pantelis Antoniou <pantelis.antoniou@xxxxxxxxxxxx>
• Re: [PATCH] i2c: busses: xgene-slimpro: fix incorrect __init declation for probe
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v3] i2c: davinci: Refactor i2c_davinci_wait_bus_not_busy()
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v3] i2c: davinci: Avoid sending to own address
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v6 0/6] i2c: at91: add support to FIFOs and alternative command
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [V5, 1/2] i2c: brcmstb: Add Broadcom settop SoC i2c controller driver
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v6 0/6] i2c: at91: add support to FIFOs and alternative command
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: Mark instantiated device nodes with OF_POPULATE
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: Mark instantiated device nodes with OF_POPULATE
  • From: Rob Herring <robherring2@xxxxxxxxx>
• Re: [PATCH v6 5/6] i2c: at91: print hardware version
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v6 5/6] i2c: at91: print hardware version
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 00/21] On-demand device registration
  • From: Tomeu Vizoso <tomeu.vizoso@xxxxxxxxxxxxx>
• Re: [PATCH v6 5/6] i2c: at91: print hardware version
  • From: Ludovic Desroches <ludovic.desroches@xxxxxxxxx>
• Re: [PATCH] i2c: designware: use enable on resume instead initialization
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH 00/21] On-demand device registration
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH] i2c: designware: use enable on resume instead initialization
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: Mark instantiated device nodes with OF_POPULATE
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: clock driver
  • From: York Sun <yorksun@xxxxxxxxxxxxx>
• Re: [PATCH v5 4/6] i2c: at91: add support for new alternative command mode
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [V4, 1/2] i2c: brcmstb: Add Broadcom settop SoC i2c controller driver
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v6 5/6] i2c: at91: print hardware version
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• [V5, 2/2] dt-bindings: i2c: Add i2c-brcmstb dt bindings
  • From: Kamal Dasu <kdasu.kdev@xxxxxxxxx>
• [V5, 1/2] i2c: brcmstb: Add Broadcom settop SoC i2c controller driver
  • From: Kamal Dasu <kdasu.kdev@xxxxxxxxx>
• Re: [PATCH] i2c: designware: use enable on resume instead initialization
  • From: Lucas De Marchi <lucas.de.marchi@xxxxxxxxx>
• Re: [V4, 1/2] i2c: brcmstb: Add Broadcom settop SoC i2c controller driver
  • From: Kamal Dasu <kdasu.kdev@xxxxxxxxx>
• [PATCH v6 3/6] i2c: at91: update documentation for DT bindings
  • From: Cyrille Pitchen <cyrille.pitchen@xxxxxxxxx>
• [PATCH v6 4/6] i2c: at91: add support for new alternative command mode
  • From: Cyrille Pitchen <cyrille.pitchen@xxxxxxxxx>
• [PATCH v6 6/6] i2c: at91: add support to FIFOs
  • From: Cyrille Pitchen <cyrille.pitchen@xxxxxxxxx>
• [PATCH v6 5/6] i2c: at91: print hardware version
  • From: Cyrille Pitchen <cyrille.pitchen@xxxxxxxxx>
• [PATCH v6 2/6] i2c: at91: use BIT() macro to define register bits
  • From: Cyrille Pitchen <cyrille.pitchen@xxxxxxxxx>
• [PATCH v6 1/6] i2c: at91: fix a race condition when using the DMA controller
  • From: Cyrille Pitchen <cyrille.pitchen@xxxxxxxxx>
• [PATCH v6 0/6] i2c: at91: add support to FIFOs and alternative command
  • From: Cyrille Pitchen <cyrille.pitchen@xxxxxxxxx>
• Re: [PATCH v5 4/6] i2c: at91: add support for new alternative command mode
  • From: Nicolas Ferre <nicolas.ferre@xxxxxxxxx>
• Re: [PATCH v5 3/6] i2c: at91: update documentation for DT bindings
  • From: Nicolas Ferre <nicolas.ferre@xxxxxxxxx>
• Re: [PATCH 0/2] ARM: shmobile: r8a7740: move I2C errata handling into the driver
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• [PATCH v3] i2c: davinci: Avoid sending to own address
  • From: Alexander Sverdlin <alexander.sverdlin@xxxxxxxxx>
• Re: [PATCH v3] i2c: davinci: Refactor i2c_davinci_wait_bus_not_busy()
  • From: Alexander Sverdlin <alexander.sverdlin@xxxxxxxxx>
• Re: [PATCH v2] i2c: davinci: Refactor i2c_davinci_wait_bus_not_busy()
  • From: Alexander Sverdlin <alexander.sverdlin@xxxxxxxxx>
• Re: [PATCH] i2c: designware: use enable on resume instead initialization
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• [PATCH RFT] i2c: au1550: Convert to devm_kzalloc and devm_ioremap_resource
  • From: Axel Lin <axel.lin@xxxxxxxxxx>
• [PATCH 2/2] ARM: shmobile: r8a7740: remove I2C errata handling
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH 1/2] i2c: sh_mobile: add errata workaround
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH 0/2] ARM: shmobile: r8a7740: move I2C errata handling into the driver
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v4] i2c: busses: i2c-bcm2835: limits cdiv to allowed values
  • From: Stephen Warren <swarren@xxxxxxxxxxxxx>
• Re: [PATCH 00/21] On-demand device registration
  • From: Alexander Holler <holler@xxxxxxxxxxxxx>
• Re: [PATCH 00/21] On-demand device registration
  • From: Alexander Holler <holler@xxxxxxxxxxxxx>
• [PATCH] i2c: designware: use enable on resume instead initialization
  • From: lucas.de.marchi@xxxxxxxxx
• Re: [PATCH 00/21] On-demand device registration
  • From: "Enrico Weigelt, metux IT consult" <weigelt@xxxxxxxx>
• Re: [PATCH v4] i2c: busses: i2c-bcm2835: limits cdiv to allowed values
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH v4] i2c: busses: i2c-bcm2835: limits cdiv to allowed values
  • From: Silvan Wicki <linux_wi@xxxxxxxx>
• Re: [PATCH v2] i2c: busses: i2c-bcm2835: limits cdiv to allowed values
  • From: Silvan Wicki <linux_wi@xxxxxxxx>
• [PATCH v3] 2c: busses: i2c-bcm2835: limits cdiv to allowed values
  • From: Silvan Wicki <linux_wi@xxxxxxxx>
• Re: [PATCH 2/3] i2c-piix4: Use Macro for AMD CZ SMBus device ID
  • From: Borislav Petkov <bp@xxxxxxxxx>
• Re: [PATCH 1/3] pci_ids: Add AMD KERNCZ device ID support
  • From: Borislav Petkov <bp@xxxxxxxxx>
• [PATCH 1/3] pci_ids: Add AMD KERNCZ device ID support
  • From: Wan ZongShun <Vincent.Wan@xxxxxxx>
• [PATCH 2/3] i2c-piix4: Use Macro for AMD CZ SMBus device ID
  • From: Wan ZongShun <Vincent.Wan@xxxxxxx>
• [PATCH 3/3] SDHCI: Change AMD SDHCI quirk application scope
  • From: Wan ZongShun <Vincent.Wan@xxxxxxx>
• Re: [PATCH v2] i2c: busses: i2c-bcm2835: limits cdiv to allowed values
  • From: Stephen Warren <swarren@xxxxxxxxxxxxx>
• [PULL REQUEST] i2c for 4.1
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 00/21] On-demand device registration
  • From: Alexander Holler <holler@xxxxxxxxxxxxx>
• Re: [PATCH 00/21] On-demand device registration
  • From: Alexander Holler <holler@xxxxxxxxxxxxx>
• Re: [PATCH 00/21] On-demand device registration
  • From: "Grygorii.Strashko@xxxxxxxxxx" <grygorii.strashko@xxxxxxxxxx>
• Re: [PATCH 00/21] On-demand device registration
  • From: Tomeu Vizoso <tomeu.vizoso@xxxxxxxxxxxxx>
• Re: [PATCH 12/12] i2c: pxa: enable/disable i2c module across msg xfer
  • From: Yi Zhang <yizhang@xxxxxxxxxxx>
• Re: [PATCH 12/12] i2c: pxa: enable/disable i2c module across msg xfer
  • From: Vaibhav Hiremath <vaibhav.hiremath@xxxxxxxxxx>
• Re: [PATCH 12/12] i2c: pxa: enable/disable i2c module across msg xfer
  • From: Yi Zhang <yizhang@xxxxxxxxxxx>
• Re: [PATCH v5 0/6] i2c: at91: add support to FIFOs and alternative command
  • From: Ludovic Desroches <ludovic.desroches@xxxxxxxxx>
• Re: [PATCH 04/12] i2c: pxa: Add support for pxa910/988 & new configuration features
  • From: Vaibhav Hiremath <vaibhav.hiremath@xxxxxxxxxx>
• Re: [PATCH 04/12] i2c: pxa: Add support for pxa910/988 & new configuration features
  • From: Yi Zhang <yizhang@xxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 00/21] On-demand device registration
  • From: Rob Clark <robdclark@xxxxxxxxx>
• Re: [PATCH 00/21] On-demand device registration
  • From: "Grygorii.Strashko@xxxxxxxxxx" <grygorii.strashko@xxxxxxxxxx>
• Re: [PATCH 05/12] i2c: pxa: Add bus reset functionality
  • From: Vaibhav Hiremath <vaibhav.hiremath@xxxxxxxxxx>
• Re: [PATCH 12/12] i2c: pxa: enable/disable i2c module across msg xfer
  • From: Vaibhav Hiremath <vaibhav.hiremath@xxxxxxxxxx>
• [PATCH v5 6/6] i2c: at91: add support to FIFOs
  • From: Cyrille Pitchen <cyrille.pitchen@xxxxxxxxx>
• [PATCH v5 5/6] i2c: at91: print hardware version
  • From: Cyrille Pitchen <cyrille.pitchen@xxxxxxxxx>
• [PATCH v5 4/6] i2c: at91: add support for new alternative command mode
  • From: Cyrille Pitchen <cyrille.pitchen@xxxxxxxxx>
• [PATCH v5 3/6] i2c: at91: update documentation for DT bindings
  • From: Cyrille Pitchen <cyrille.pitchen@xxxxxxxxx>
• [PATCH v5 2/6] i2c: at91: use BIT() macro to define register bits
  • From: Cyrille Pitchen <cyrille.pitchen@xxxxxxxxx>
• [PATCH v5 1/6] i2c: at91: fix a race condition when using the DMA controller
  • From: Cyrille Pitchen <cyrille.pitchen@xxxxxxxxx>
• [PATCH v5 0/6] i2c: at91: add support to FIFOs and alternative command
  • From: Cyrille Pitchen <cyrille.pitchen@xxxxxxxxx>
• Re: [V4, 1/2] i2c: brcmstb: Add Broadcom settop SoC i2c controller driver
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v4 5/6] i2c: at91: print hardware version
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 12/12] i2c: pxa: enable/disable i2c module across msg xfer
  • From: Yi Zhang <yizhang@xxxxxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH v4 6/6] i2c: at91: add support to FIFOs
  • From: Cyrille Pitchen <cyrille.pitchen@xxxxxxxxx>
• [PATCH v4 5/6] i2c: at91: print hardware version
  • From: Cyrille Pitchen <cyrille.pitchen@xxxxxxxxx>
• [PATCH v4 4/6] i2c: at91: add support for new alternative command mode
  • From: Cyrille Pitchen <cyrille.pitchen@xxxxxxxxx>
• [PATCH v4 3/6] i2c: at91: update documentation for DT bindings
  • From: Cyrille Pitchen <cyrille.pitchen@xxxxxxxxx>
• [PATCH v4 2/6] i2c: at91: use BIT() macro to define register bits
  • From: Cyrille Pitchen <cyrille.pitchen@xxxxxxxxx>
• [PATCH v4 1/6] i2c: at91: fix a race condition when using the DMA controller
  • From: Cyrille Pitchen <cyrille.pitchen@xxxxxxxxx>
• [PATCH v4 0/6] i2c: at91: add support to FIFOs and alternative command
  • From: Cyrille Pitchen <cyrille.pitchen@xxxxxxxxx>
• Re: [PATCH v1 1/1] i2c: Add acpi support to enumerate i2c mux clients
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v1 1/1] i2c: designware: Fix hold and setup time issue
  • From: sathyanarayanan kuppuswamy <sathyanarayanan.kuppuswamy@xxxxxxxxxxxxxxx>
• Re: [PATCH v1 1/1] i2c: Add acpi support to enumerate i2c mux clients
  • From: sathyanarayanan kuppuswamy <sathyanarayanan.kuppuswamy@xxxxxxxxxxxxxxx>
• [PATCH] i2c: busses: xgene-slimpro: fix incorrect __init declation for probe
  • From: Feng Kan <fkan@xxxxxxx>
• Re: [PATCH 05/12] i2c: pxa: Add bus reset functionality
  • From: Vaibhav Hiremath <vaibhav.hiremath@xxxxxxxxxx>
• [PATCH-RESEND 3/3] i2c: pxa: Add pin ctrl support for CP core access
  • From: Vaibhav Hiremath <vaibhav.hiremath@xxxxxxxxxx>
• [PATCH-RESEND 2/3] i2c: pxa: Add support for hardware lock
  • From: Vaibhav Hiremath <vaibhav.hiremath@xxxxxxxxxx>
• [PATCH-RESEND 1/3] i2c: core: append hardware lock with bus lock
  • From: Vaibhav Hiremath <vaibhav.hiremath@xxxxxxxxxx>
• [PATCH-RESEND 0/3] i2c: core/pxa: Add support for hardware lock
  • From: Vaibhav Hiremath <vaibhav.hiremath@xxxxxxxxxx>
• Re: [PATCH 05/12] i2c: pxa: Add bus reset functionality
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: scx200_acb: avoid I2C bus overclocking.
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 05/12] i2c: pxa: Add bus reset functionality
  • From: Vaibhav Hiremath <vaibhav.hiremath@xxxxxxxxxx>
• Re: [PATCH v2] i2c: iproc: Add suspend/resume support
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 05/12] i2c: pxa: Add bus reset functionality
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 05/12] i2c: pxa: Add bus reset functionality
  • From: Vaibhav Hiremath <vaibhav.hiremath@xxxxxxxxxx>
• Re: [PATCH v2] i2c: designware: Avoid unnecessary resuming during system suspend
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 05/12] i2c: pxa: Add bus reset functionality
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v1 1/1] i2c: designware: Fix hold and setup time issue
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 05/12] i2c: pxa: Add bus reset functionality
  • From: Vaibhav Hiremath <vaibhav.hiremath@xxxxxxxxxx>
• Re: [PATCH 05/12] i2c: pxa: Add bus reset functionality
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 12/12] i2c: pxa: enable/disable i2c module across msg xfer
  • From: Vaibhav Hiremath <vaibhav.hiremath@xxxxxxxxxx>
• Re: [PATCH 12/12] i2c: pxa: enable/disable i2c module across msg xfer
  • From: Vaibhav Hiremath <vaibhav.hiremath@xxxxxxxxxx>
• Re: [PATCH 05/12] i2c: pxa: Add bus reset functionality
  • From: Vaibhav Hiremath <vaibhav.hiremath@xxxxxxxxxx>
• Re: [PATCH v1 1/1] i2c: Add acpi support to enumerate i2c mux clients
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v3 0/6] i2c: at91: add support to FIFOs and alternative command
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v2] i2c: davinci: Refactor i2c_davinci_wait_bus_not_busy()
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v3 0/6] i2c: at91: add support to FIFOs and alternative command
  • From: Ludovic Desroches <ludovic.desroches@xxxxxxxxx>
• Re: [PATCH v2] i2c: davinci: Avoid sending to own address
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v2] i2c: busses: i2c-bcm2835: limits cdiv to allowed values
  • From: Silvan Wicki <linux_wi@xxxxxxxx>
• Re: [PATCH v2] i2c: axxia: Add bus recovery functionality
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v3 0/6] i2c: at91: add support to FIFOs and alternative command
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v2] i2c: core: Reduce stack size of acpi_i2c_space_handler()
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v3 0/6] i2c: at91: add support to FIFOs and alternative command
  • From: Ludovic Desroches <ludovic.desroches@xxxxxxxxx>
• Re: [PATCH v3 5/6] i2c: at91: print hardware version
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• [PATCH v3 2/6] i2c: at91: update documentation for DT bindings
  • From: Cyrille Pitchen <cyrille.pitchen@xxxxxxxxx>
• [PATCH v3 4/6] i2c: at91: add support for new alternative command mode
  • From: Cyrille Pitchen <cyrille.pitchen@xxxxxxxxx>
• [PATCH v3 3/6] i2c: at91: fix a race condition when using the DMA controller
  • From: Cyrille Pitchen <cyrille.pitchen@xxxxxxxxx>
• [PATCH v3 5/6] i2c: at91: print hardware version
  • From: Cyrille Pitchen <cyrille.pitchen@xxxxxxxxx>
• [PATCH v3 6/6] i2c: at91: add support to FIFOs
  • From: Cyrille Pitchen <cyrille.pitchen@xxxxxxxxx>
• [PATCH v3 1/6] i2c: at91: use BIT() macro to define register bits
  • From: Cyrille Pitchen <cyrille.pitchen@xxxxxxxxx>
• [PATCH v3 0/6] i2c: at91: add support to FIFOs and alternative command
  • From: Cyrille Pitchen <cyrille.pitchen@xxxxxxxxx>
• Re: [PATCH 05/12] i2c: pxa: Add bus reset functionality
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 00/21] On-demand device registration
  • From: Tomeu Vizoso <tomeu.vizoso@xxxxxxxxxxxxx>
• Re: [PATCH 00/21] On-demand device registration
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v2 0/5] i2c: at91: add support to FIFOs and alternative command
  • From: Ludovic Desroches <ludovic.desroches@xxxxxxxxx>
• Re: [PATCH 04/12] i2c: pxa: Add support for pxa910/988 & new configuration features
  • From: Vaibhav Hiremath <vaibhav.hiremath@xxxxxxxxxx>
• Re: [PATCH 00/12] i2c: pxa: Fixes, cleanup and support for pxa910 family
  • From: Vaibhav Hiremath <vaibhav.hiremath@xxxxxxxxxx>
• Re: [PATCH v2] i2c: busses: i2c-bcm2835: limits cdiv to allowed values
  • From: Eric Anholt <eric@xxxxxxxxxx>
• Re: [PATCH v2 3/5] i2c: at91: add support for new alternative command mode
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx>
• [PATCH v2 4/5] i2c: at91: print hardware version
  • From: Cyrille Pitchen <cyrille.pitchen@xxxxxxxxx>
• [PATCH v2 5/5] i2c: at91: add support to FIFOs
  • From: Cyrille Pitchen <cyrille.pitchen@xxxxxxxxx>
• [PATCH v2 3/5] i2c: at91: add support for new alternative command mode
  • From: Cyrille Pitchen <cyrille.pitchen@xxxxxxxxx>
• [PATCH v2 2/5] i2c: at91: update documentation for DT bindings
  • From: Cyrille Pitchen <cyrille.pitchen@xxxxxxxxx>
• [PATCH v2 1/5] i2c: at91: use BIT() macro to define register bits
  • From: Cyrille Pitchen <cyrille.pitchen@xxxxxxxxx>
• [PATCH v2 0/5] i2c: at91: add support to FIFOs and alternative command
  • From: Cyrille Pitchen <cyrille.pitchen@xxxxxxxxx>
• Re: [PATCH 3/3] i2c: at91: add support to FIFOs
  • From: Ludovic Desroches <ludovic.desroches@xxxxxxxxx>
• Re: [PATCH 2/3] i2c: at91: print hardware version
  • From: Ludovic Desroches <ludovic.desroches@xxxxxxxxx>
• Re: [PATCH 1/3] i2c: at91: add support for new alternative command mode
  • From: Ludovic Desroches <ludovic.desroches@xxxxxxxxx>
• Re: [PATCH 0/6] use devicemodel with parport
  • From: Sudip Mukherjee <sudipm.mukherjee@xxxxxxxxx>
• [PATCH 2/2 i2c-tools] decode-dimms: New manufacturer names from JEP106AQ
  • From: Jean Delvare <jdelvare@xxxxxxx>
• [PATCH 1/2 i2c-tools] sensors-detect: Manufacturer name changes from JEP106AQ
  • From: Jean Delvare <jdelvare@xxxxxxx>
• [PATCH 2/2 i2c-tools] sensors-detect: Refactor manufacturer decoding
  • From: Jean Delvare <jdelvare@xxxxxxx>
• [PATCH v2 1/2 i2c-tools] decode-dimms: Complete check for out-of-bounds vendor ID
  • From: Jean Delvare <jdelvare@xxxxxxx>
• [PATCH i2c-tools] decode-dimms: Complete check for out-of-bounds vendor ID
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH i2c-tools] decode-dimms: correctly check for out-of-bounds vendor id
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH 0/6] use devicemodel with parport
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 0/6] use devicemodel with parport
  • From: Sudip Mukherjee <sudipm.mukherjee@xxxxxxxxx>
• Re: [PATCH 04/12] i2c: pxa: Add support for pxa910/988 & new configuration features
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 00/12] i2c: pxa: Fixes, cleanup and support for pxa910 family
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] I2c:smbus - Fix typo in comment.
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 12/12] i2c-algo-pca: Fix typo in comment.
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 11/11] i2c-core: Fix typo in comment
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v9 0/3] ARM: mediatek: Add driver for Mediatek I2C
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: check for proper length of the reg property
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [alsa-devel] [RFC] sound: ppc: keywest: check if DEQ was already instantiated
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 4/4] i2c: slave: add error messages to slave core
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 0/4] i2c: small updates to the slave framework
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 0/6] use devicemodel with parport
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 11/12] i2c:pxa: Use devm_ variants in probe function
  • From: Vaibhav Hiremath <vaibhav.hiremath@xxxxxxxxxx>
• Re: [PATCH 11/12] i2c:pxa: Use devm_ variants in probe function
  • From: Robert Jarzmik <robert.jarzmik@xxxxxxx>
• [PATCH i2c-tools] decode-dimms: correctly check for out-of-bounds vendor id
  • From: Lubomir Rintel <lkundrak@xxxxx>
• Re: [PATCH v1] HID: support multiple and large i2c transfers in hid-cp2112
  • From: Ellen Wang <ellen@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v1] HID: support multiple and large i2c transfers in hid-cp2112
  • From: Antonio Borneo <borneo.antonio@xxxxxxxxx>
• Re: [PATCH v1] HID: support multiple and large i2c transfers in hid-cp2112
  • From: Ellen Wang <ellen@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v1] HID: support multiple and large i2c transfers in hid-cp2112
  • From: Antonio Borneo <borneo.antonio@xxxxxxxxx>
• Re: [PATCH 10/12] i2c: pxa: Update debug function to dump more info on error
  • From: Vaibhav Hiremath <vaibhav.hiremath@xxxxxxxxxx>
• Re: [PATCH 10/12] i2c: pxa: Update debug function to dump more info on error
  • From: Robert Jarzmik <robert.jarzmik@xxxxxxx>
• Re: [PATCH 09/12] i2c: pxa: Remove compile warnning in 64bit mode
  • From: Robert Jarzmik <robert.jarzmik@xxxxxxx>
• Re: [PATCH 06/12] i2c: pxa: Return I2C_RETRY when timeout in pio mode
  • From: Vaibhav Hiremath <vaibhav.hiremath@xxxxxxxxxx>
• Re: [PATCH 07/12] i2c: pxa: Reset i2c controller on timeout in interrupt and pio mode
  • From: Vaibhav Hiremath <vaibhav.hiremath@xxxxxxxxxx>
• Re: [PATCH 07/12] i2c: pxa: Reset i2c controller on timeout in interrupt and pio mode
  • From: Robert Jarzmik <robert.jarzmik@xxxxxxx>
• Re: [PATCH 06/12] i2c: pxa: Return I2C_RETRY when timeout in pio mode
  • From: Robert Jarzmik <robert.jarzmik@xxxxxxx>
• Re: [PATCH 04/12] i2c: pxa: Add support for pxa910/988 & new configuration features
  • From: Vaibhav Hiremath <vaibhav.hiremath@xxxxxxxxxx>
• Re: [PATCH 05/12] i2c: pxa: Add bus reset functionality
  • From: Robert Jarzmik <robert.jarzmik@xxxxxxx>
• Re: [PATCH 04/12] i2c: pxa: Add support for pxa910/988 & new configuration features
  • From: Robert Jarzmik <robert.jarzmik@xxxxxxx>
• Re: [PATCH 03/12] i2c: pxa: Add reset operation when i2c bus busy
  • From: Vaibhav Hiremath <vaibhav.hiremath@xxxxxxxxxx>
• Re: [PATCH 03/12] i2c: pxa: Add reset operation when i2c bus busy
  • From: Robert Jarzmik <robert.jarzmik@xxxxxxx>
• Re: [PATCH 02/12] i2c: pxa: No need to set slave addr for i2c master mode reset
  • From: Robert Jarzmik <robert.jarzmik@xxxxxxx>
• Re: [PATCH 02/12] i2c: pxa: No need to set slave addr for i2c master mode reset
  • From: Vaibhav Hiremath <vaibhav.hiremath@xxxxxxxxxx>
• Re: [PATCH v1] HID: support multiple and large i2c transfers in hid-cp2112
  • From: Ellen Wang <ellen@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v1] HID: support multiple and large i2c transfers in hid-cp2112
  • From: Antonio Borneo <borneo.antonio@xxxxxxxxx>
• Re: [PATCH 05/12] i2c: pxa: Add bus reset functionality
  • From: Vaibhav Hiremath <vaibhav.hiremath@xxxxxxxxxx>
• Re: [PATCH v1] HID: support multiple and large i2c transfers in hid-cp2112
  • From: Jiri Kosina <jkosina@xxxxxxx>
• Re: [PATCH 05/12] i2c: pxa: Add bus reset functionality
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH 3/3] i2c: at91: add support to FIFOs
  • From: Cyrille Pitchen <cyrille.pitchen@xxxxxxxxx>
• [PATCH 2/3] i2c: at91: print hardware version
  • From: Cyrille Pitchen <cyrille.pitchen@xxxxxxxxx>
• [PATCH 1/3] i2c: at91: add support for new alternative command mode
  • From: Cyrille Pitchen <cyrille.pitchen@xxxxxxxxx>
• [PATCH 0/3] i2c: at91: add support to FIFOs and alternative command
  • From: Cyrille Pitchen <cyrille.pitchen@xxxxxxxxx>
• Re: [alsa-devel] [RFC] sound: ppc: keywest: check if DEQ was already instantiated
  • From: Takashi Iwai <tiwai@xxxxxxx>
• Re: [alsa-devel] [RFC] sound: ppc: keywest: check if DEQ was already instantiated
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [alsa-devel] [RFC] sound: ppc: keywest: check if DEQ was already instantiated
  • From: Takashi Iwai <tiwai@xxxxxxx>
• Re: [alsa-devel] [RFC] sound: ppc: keywest: check if DEQ was already instantiated
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH v2] i2c: busses: i2c-bcm2835: limits cdiv to allowed values
  • From: Silvan Wicki <linux_wi@xxxxxxxx>
• Common clock framework examples
  • From: York Sun <yorksun@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: busses: i2c-bcm2835: limits cdiv to allowed values
  • From: Stephen Warren <swarren@xxxxxxxxxxxxx>
• Re: clock driver
  • From: York Sun <yorksun@xxxxxxxxxxxxx>
• Re: [RFC]: Supporting PIO mode of operation in i2c_msg->flags
  • From: Vaibhav Hiremath <vaibhav.hiremath@xxxxxxxxxx>
• [PATCH 3/3] i2c: pxa: Add pin ctrl support for CP core access
  • From: Vaibhav Hiremath <vaibhav.hiremath@xxxxxxxxxx>
• [PATCH 2/3] i2c: pxa: Add support for hardware lock
  • From: Vaibhav Hiremath <vaibhav.hiremath@xxxxxxxxxx>
• [PATCH 1/3] i2c: core: append hardware lock with bus lock
  • From: Vaibhav Hiremath <vaibhav.hiremath@xxxxxxxxxx>
• [PATCH 0/3] i2c: core/pxa: Add support for hardware lock
  • From: Vaibhav Hiremath <vaibhav.hiremath@xxxxxxxxxx>
• Re: [PATCH 08/12] i2c: pxa: enable/disable irq across message xfer
  • From: Vaibhav Hiremath <vaibhav.hiremath@xxxxxxxxxx>
• Re: [PATCH 12/12] i2c: pxa: enable/disable i2c module across msg xfer
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH 08/12] i2c: pxa: enable/disable irq across message xfer
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• [PATCH 12/12] i2c: pxa: enable/disable i2c module across msg xfer
  • From: Vaibhav Hiremath <vaibhav.hiremath@xxxxxxxxxx>
• [PATCH 11/12] i2c:pxa: Use devm_ variants in probe function
  • From: Vaibhav Hiremath <vaibhav.hiremath@xxxxxxxxxx>
• [PATCH 10/12] i2c: pxa: Update debug function to dump more info on error
  • From: Vaibhav Hiremath <vaibhav.hiremath@xxxxxxxxxx>
• [PATCH 09/12] i2c: pxa: Remove compile warnning in 64bit mode
  • From: Vaibhav Hiremath <vaibhav.hiremath@xxxxxxxxxx>
• [PATCH 08/12] i2c: pxa: enable/disable irq across message xfer
  • From: Vaibhav Hiremath <vaibhav.hiremath@xxxxxxxxxx>
• [PATCH 07/12] i2c: pxa: Reset i2c controller on timeout in interrupt and pio mode
  • From: Vaibhav Hiremath <vaibhav.hiremath@xxxxxxxxxx>
• [PATCH 06/12] i2c: pxa: Return I2C_RETRY when timeout in pio mode
  • From: Vaibhav Hiremath <vaibhav.hiremath@xxxxxxxxxx>
• [PATCH 05/12] i2c: pxa: Add bus reset functionality
  • From: Vaibhav Hiremath <vaibhav.hiremath@xxxxxxxxxx>
• [PATCH 04/12] i2c: pxa: Add support for pxa910/988 & new configuration features
  • From: Vaibhav Hiremath <vaibhav.hiremath@xxxxxxxxxx>
• [PATCH 03/12] i2c: pxa: Add reset operation when i2c bus busy
  • From: Vaibhav Hiremath <vaibhav.hiremath@xxxxxxxxxx>
• [PATCH 02/12] i2c: pxa: No need to set slave addr for i2c master mode reset
  • From: Vaibhav Hiremath <vaibhav.hiremath@xxxxxxxxxx>
• [PATCH 01/12] i2c: pxa: keep i2c irq ON in suspend
  • From: Vaibhav Hiremath <vaibhav.hiremath@xxxxxxxxxx>
• [PATCH 00/12] i2c: pxa: Fixes, cleanup and support for pxa910 family
  • From: Vaibhav Hiremath <vaibhav.hiremath@xxxxxxxxxx>
• Re: [alsa-devel] [RFC] sound: ppc: keywest: check if DEQ was already instantiated
  • From: Takashi Iwai <tiwai@xxxxxxx>
• Re: clock driver
  • From: Michael Turquette <mturquette@xxxxxxxxxx>
• Re: [PATCH 00/21] On-demand device registration
  • From: Rob Herring <robherring2@xxxxxxxxx>
• Re: clock driver
  • From: andrey <andrey@xxxxxxxxxx>
• Re: clock driver
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: clock driver
  • From: andrey <andrey@xxxxxxxxxx>
• Re: clock driver
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: clock driver
  • From: York Sun <yorksun@xxxxxxxxxxxxx>
• Re: clock driver
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: clock driver
  • From: York Sun <yorksun@xxxxxxxxxxxxx>
• Re: clock driver
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: clock driver
  • From: York Sun <yorksun@xxxxxxxxxxxxx>
• Re: clock driver
  • From: Michael Turquette <mturquette@xxxxxxxxxx>
• Re: clock driver
  • From: York Sun <yorksun@xxxxxxxxxxxxx>
• Re: clock driver
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: clock driver
  • From: York Sun <yorksun@xxxxxxxxxxxxx>
• Re: clock driver
  • From: Sebastian Hesselbarth <sebastian.hesselbarth@xxxxxxxxx>
• Re: clock driver
  • From: York Sun <yorksun@xxxxxxxxxxxxx>
• Re: clock driver
  • From: Sebastian Hesselbarth <sebastian.hesselbarth@xxxxxxxxx>
• Re: clock driver
  • From: York Sun <yorksun@xxxxxxxxxxxxx>
• Re: clock driver
  • From: York Sun <yorksun@xxxxxxxxxxxxx>
• Re: clock driver
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• clock driver
  • From: York Sun <yorksun@xxxxxxxxxxxxx>
• Py-smbus and python3 support: it's time for a new release?
  • From: Angelo Compagnucci <angelo.compagnucci@xxxxxxxxx>
• [PATCH 13/21] i2c: core: Probe i2c master devices on demand
  • From: Tomeu Vizoso <tomeu.vizoso@xxxxxxxxxxxxx>
• [PATCH 00/21] On-demand device registration
  • From: Tomeu Vizoso <tomeu.vizoso@xxxxxxxxxxxxx>
• [RFC]: Supporting PIO mode of operation in i2c_msg->flags
  • From: Vaibhav Hiremath <vaibhav.hiremath@xxxxxxxxxx>
• Re: [PATCH v2] i2c: designware: Avoid unnecessary resuming during system suspend
  • From: Jisheng Zhang <jszhang@xxxxxxxxxxx>
• Re: [PATCH v9 0/3] ARM: mediatek: Add driver for Mediatek I2C
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v9 0/3] ARM: mediatek: Add driver for Mediatek I2C
  • From: Eddie Huang <eddie.huang@xxxxxxxxxxxx>
• Re: I2C class bitmask
  • From: York Sun <yorksun@xxxxxxxxxxxxx>
• Re: I2C class bitmask
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [RFC] sound: ppc: keywest: check if DEQ was already instantiated
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v2 0/2] Fix OF match for adxl34x driver
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v2 0/2] Fix OF match for adxl34x driver
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• [PATCH v3 i2c/for-next] i2c: i801: recover from hardware PEC errors
  • From: Ellen Wang <ellen@xxxxxxxxxxxxxxxxxxx>
• [PATCH] i2c: busses: i2c-bcm2835: limits cdiv to allowed values
  • From: "s. wicki" <linux_wi@xxxxxxxx>
• Re: [PATCH v2 1/2] DT: i2c: Deprecate adi,adxl34x compatible string
  • From: Simon Horman <horms@xxxxxxxxxxxx>
• Re: [PATCH v2 2/2] input: adxl34x: Add OF match support
  • From: Simon Horman <horms@xxxxxxxxxxxx>
• I2C class bitmask
  • From: York Sun <yorksun@xxxxxxxxxxxxx>
• Re: [PATCH v9 0/3] ARM: mediatek: Add driver for Mediatek I2C
  • From: Daniel Kurtz <djkurtz@xxxxxxxxxxxx>
• resend [PATCH] misc: eeprom: at25: add Cypress FRAM functionality
  • From: Jiří Prchal <jiri.prchal@xxxxxxxxxxx>
• [PATCH v2 2/2] input: adxl34x: Add OF match support
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• [PATCH v2 1/2] DT: i2c: Deprecate adi,adxl34x compatible string
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• [PATCH v2 0/2] Fix OF match for adxl34x driver
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• Re: [PATCH v2] i2c: designware: Avoid unnecessary resuming during system suspend
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• [PATCH v9 0/3] ARM: mediatek: Add driver for Mediatek I2C
  • From: Eddie Huang <eddie.huang@xxxxxxxxxxxx>
• [PATCH v9 1/3] dt-bindings: Add I2C bindings for mt65xx/mt81xx.
  • From: Eddie Huang <eddie.huang@xxxxxxxxxxxx>
• [PATCH v9 2/3] I2C: mediatek: Add driver for MediaTek I2C controller
  • From: Eddie Huang <eddie.huang@xxxxxxxxxxxx>
• [PATCH v9 3/3] I2C: mediatek: Add driver for MediaTek MT8173 I2C controller
  • From: Eddie Huang <eddie.huang@xxxxxxxxxxxx>
• Re: [PATCH v8 2/3] I2C: mediatek: Add driver for MediaTek I2C controller
  • From: Eddie Huang <eddie.huang@xxxxxxxxxxxx>
• [PATCH v2 4/6] i2c-parport: use new parport device model
  • From: Sudip Mukherjee <sudipm.mukherjee@xxxxxxxxx>
• Re: [PATCH 6/6] MAINTAINERS: maintain parport
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 6/6] MAINTAINERS: maintain parport
  • From: Sudip Mukherjee <sudipm.mukherjee@xxxxxxxxx>
• Re: [PATCH 6/6] MAINTAINERS: maintain parport
  • From: Willy Tarreau <w@xxxxxx>
• Re: [RFC PATCH] checkpatch: check for 2 or more spaces around assignment of a declaration
  • From: Willy Tarreau <w@xxxxxx>
• [RFC PATCH] checkpatch: check for 2 or more spaces around assignment of a declaration
  • From: Joe Perches <joe@xxxxxxxxxxx>
• Re: [PATCH RFC] i2c: Use ID table to detect ACPI I2C devices
  • From: Robert Dolca <robert.dolca@xxxxxxxxx>
• Re: [V4, 1/2] i2c: brcmstb: Add Broadcom settop SoC i2c controller driver
  • From: Ray Jui <rjui@xxxxxxxxxxxx>
• Re: [PATCH 6/6] MAINTAINERS: maintain parport
  • From: Richard Weinberger <richard@xxxxxx>
• Re: [V4, 1/2] i2c: brcmstb: Add Broadcom settop SoC i2c controller driver
  • From: Kamal Dasu <kdasu.kdev@xxxxxxxxx>
• Re: [PATCH 4/6] i2c-parport: use new parport device model
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH 4/6] i2c-parport: use new parport device model
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 6/6] MAINTAINERS: maintain parport
  • From: Sudip Mukherjee <sudipm.mukherjee@xxxxxxxxx>
• Re: [PATCH 4/6] i2c-parport: use new parport device model
  • From: Sudip Mukherjee <sudipm.mukherjee@xxxxxxxxx>
• Re: [PATCH 6/6] MAINTAINERS: maintain parport
  • From: Joe Perches <joe@xxxxxxxxxxx>
• Re: [PATCH 6/6] MAINTAINERS: maintain parport
  • From: One Thousand Gnomes <gnomes@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 4/6] i2c-parport: use new parport device model
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 3/6] i2c-parport: define ports to connect
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 6/6] MAINTAINERS: maintain parport
  • From: Richard Weinberger <richard.weinberger@xxxxxxxxx>
• Re: [PATCH v8 2/3] I2C: mediatek: Add driver for MediaTek I2C controller
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 1/6] parport: add device-model to parport subsystem
  • From: Sudip Mukherjee <sudipm.mukherjee@xxxxxxxxx>
• [PATCH 3/6] i2c-parport: define ports to connect
  • From: Sudip Mukherjee <sudipm.mukherjee@xxxxxxxxx>
• [PATCH 2/6] staging: panel: use new parport device model
  • From: Sudip Mukherjee <sudipm.mukherjee@xxxxxxxxx>
• [PATCH 5/6] paride: use new parport device model
  • From: Sudip Mukherjee <sudipm.mukherjee@xxxxxxxxx>
• [PATCH 4/6] i2c-parport: use new parport device model
  • From: Sudip Mukherjee <sudipm.mukherjee@xxxxxxxxx>
• [PATCH 6/6] MAINTAINERS: maintain parport
  • From: Sudip Mukherjee <sudipm.mukherjee@xxxxxxxxx>
• [PATCH 0/6] use devicemodel with parport
  • From: Sudip Mukherjee <sudipm.mukherjee@xxxxxxxxx>
• [PATCH v2] i2c: designware: Avoid unnecessary resuming during system suspend
  • From: Jisheng Zhang <jszhang@xxxxxxxxxxx>
• Re: [PATCH RFC] i2c: Use ID table to detect ACPI I2C devices
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• [PATCH v2] i2c: core: Reduce stack size of acpi_i2c_space_handler()
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH RFC] i2c: Use ID table to detect ACPI I2C devices
  • From: Robert Dolca <robert.dolca@xxxxxxxxx>
• Re: [PATCH v8 2/3] I2C: mediatek: Add driver for MediaTek I2C controller
  • From: Yingjoe Chen <yingjoe.chen@xxxxxxxxxxxx>
• Re: [PATCH] i2c: designware: separate ops for system_sleep_pm and runtime_pm
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: designware: separate ops for system_sleep_pm and runtime_pm
  • From: Jisheng Zhang <jszhang@xxxxxxxxxxx>
• Re: [PATCH] i2c: designware: separate ops for system_sleep_pm and runtime_pm
  • From: Jisheng Zhang <jszhang@xxxxxxxxxxx>
• Re: [PATCH] i2c: designware: separate ops for system_sleep_pm and runtime_pm
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: designware: separate ops for system_sleep_pm and runtime_pm
  • From: Jisheng Zhang <jszhang@xxxxxxxxxxx>
• Re: [PATCH] i2c: designware: separate ops for system_sleep_pm and runtime_pm
  • From: Jisheng Zhang <jszhang@xxxxxxxxxxx>
• Re: [PATCH RFC] i2c: Use ID table to detect ACPI I2C devices
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH RFC] i2c: Use ID table to detect ACPI I2C devices
  • From: Robert Dolca <robert.dolca@xxxxxxxxx>
• Re: [PATCH RFC] i2c: Use ID table to detect ACPI I2C devices
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH RFC] i2c: Use ID table to detect ACPI I2C devices
  • From: Robert Dolca <robert.dolca@xxxxxxxxx>
• Re: [PATCH v8 2/3] I2C: mediatek: Add driver for MediaTek I2C controller
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH v8 2/3] I2C: mediatek: Add driver for MediaTek I2C controller
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH v8 2/3] I2C: mediatek: Add driver for MediaTek I2C controller
  • From: Eddie Huang <eddie.huang@xxxxxxxxxxxx>
• Re: [PATCH RFC] i2c: Use ID table to detect ACPI I2C devices
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH v8 2/3] I2C: mediatek: Add driver for MediaTek I2C controller
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH v8 2/3] I2C: mediatek: Add driver for MediaTek I2C controller
  • From: Eddie Huang <eddie.huang@xxxxxxxxxxxx>
• Re: [PATCH v8 2/3] I2C: mediatek: Add driver for MediaTek I2C controller
  • From: Yingjoe Chen <yingjoe.chen@xxxxxxxxxxxx>
• Re: [PATCH v8 3/3] I2C: mediatek: Add driver for MediaTek MT8173 I2C controller
  • From: Eddie Huang <eddie.huang@xxxxxxxxxxxx>
• Re: [PATCH v8 2/3] I2C: mediatek: Add driver for MediaTek I2C controller
  • From: Eddie Huang <eddie.huang@xxxxxxxxxxxx>
• Re: [PATCH] i2c: check for proper length of the reg property
  • From: Simon Horman <horms@xxxxxxxxxxxx>
• Re: [PATCH RFC] i2c: Use ID table to detect ACPI I2C devices
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• Re: [V4, 1/2] i2c: brcmstb: Add Broadcom settop SoC i2c controller driver
  • From: Ray Jui <rjui@xxxxxxxxxxxx>
• Re: [PATCH v8 2/3] I2C: mediatek: Add driver for MediaTek I2C controller
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH] i2c: check for proper length of the reg property
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [V3, 1/2] i2c: brcmstb: Add Broadcom settop SoC i2c controller driver
  • From: Kamal Dasu <kdasu.kdev@xxxxxxxxx>
• [V4, 1/2] i2c: brcmstb: Add Broadcom settop SoC i2c controller driver
  • From: Kamal Dasu <kdasu.kdev@xxxxxxxxx>
• [V4, 2/2] dt-bindings: i2c: Add i2c-brcmstb dt bindings
  • From: Kamal Dasu <kdasu.kdev@xxxxxxxxx>
• Re: [PATCH v8 2/3] I2C: mediatek: Add driver for MediaTek I2C controller
  • From: Matthias Brugger <matthias.bgg@xxxxxxxxx>
• Re: [PATCH v8 3/3] I2C: mediatek: Add driver for MediaTek MT8173 I2C controller
  • From: Matthias Brugger <matthias.bgg@xxxxxxxxx>
• [PATCH] I2c:smbus - Fix typo in comment.
  • From: Shailendra Verma <shailendra.capricorn@xxxxxxxxx>
• [PATCH RFC] i2c: Use ID table to detect ACPI I2C devices
  • From: Robert Dolca <robert.dolca@xxxxxxxxx>
• Re: [PATCH] i2c: designware: separate ops for system_sleep_pm and runtime_pm
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: designware: separate ops for system_sleep_pm and runtime_pm
  • From: Jisheng Zhang <jszhang@xxxxxxxxxxx>
• Re: [PATCH 11/11] i2c-core: Fix typo in comment
  • From: Sudip Mukherjee <sudipm.mukherjee@xxxxxxxxx>
• Re: [PATCH 11/11] i2c-core: Fix typo in comment
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: How to encode being an I2C slave in DT?
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 11/11] i2c-core: Fix typo in comment
  • From: Sudip Mukherjee <sudipm.mukherjee@xxxxxxxxx>
• Re: [PATCH 11/11] i2c-core: Fix typo in comment
  • From: Sudip Mukherjee <sudipm.mukherjee@xxxxxxxxx>
• Re: How to encode being an I2C slave in DT?
  • From: Rob Herring <robherring2@xxxxxxxxx>
• Re: [PATCH v1 1/1] i2c: designware: Fix hold and setup time issue
  • From: sathyanarayanan kuppuswamy <sathyanarayanan.kuppuswamy@xxxxxxxxxxxxxxx>
• Re: [PATCH v1 1/1] i2c: Add acpi support to enumerate i2c mux clients
  • From: sathyanarayanan kuppuswamy <sathyanarayanan.kuppuswamy@xxxxxxxxxxxxxxx>
• Re: [PATCH v8 2/3] I2C: mediatek: Add driver for MediaTek I2C controller
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH v8 1/3] dt-bindings: Add I2C bindings for mt65xx/mt81xx.
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 12/12] i2c-algo-pca: Fix typo in comment.
  • From: Shailendra Verma <shailendra.capricorn@xxxxxxxxx>
• [PATCH 11/11] i2c-core: Fix typo in comment
  • From: Shailendra Verma <shailendra.capricorn@xxxxxxxxx>
• [PATCH v8 2/3] I2C: mediatek: Add driver for MediaTek I2C controller
  • From: Eddie Huang <eddie.huang@xxxxxxxxxxxx>
• [PATCH v8 3/3] I2C: mediatek: Add driver for MediaTek MT8173 I2C controller
  • From: Eddie Huang <eddie.huang@xxxxxxxxxxxx>
• [PATCH v8 1/3] dt-bindings: Add I2C bindings for mt65xx/mt81xx.
  • From: Eddie Huang <eddie.huang@xxxxxxxxxxxx>
• [PATCH v8 0/3] ARM: mediatek: Add driver for Mediatek I2C
  • From: Eddie Huang <eddie.huang@xxxxxxxxxxxx>
• Re: [PATCH v7 2/3] I2C: mediatek: Add driver for MediaTek I2C controller
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: designware: separate ops for system_sleep_pm and runtime_pm
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: eeprom: at24: Provide an EEPROM framework interface
  • From: Pantelis Antoniou <panto@xxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v7 2/3] I2C: mediatek: Add driver for MediaTek I2C controller
  • From: Eddie Huang <eddie.huang@xxxxxxxxxxxx>
• Re: [PATCH v7 2/3] I2C: mediatek: Add driver for MediaTek I2C controller
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH/RFC] i2c: rcar: Fix order of restart and clear status
  • From: Simon Horman <horms@xxxxxxxxxxxx>
• Re: [PATCH v7 2/3] I2C: mediatek: Add driver for MediaTek I2C controller
  • From: Eddie Huang <eddie.huang@xxxxxxxxxxxx>
• Re: [PATCH] i2c: eeprom: at24: Provide an EEPROM framework interface
  • From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/4] i2c: add FUNC flag for slave capabilities
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 1/4] i2c: add FUNC flag for slave capabilities
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH 1/4] i2c: add FUNC flag for slave capabilities
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [V3, 1/2] i2c: brcmstb: Add Broadcom settop SoC i2c controller driver
  • From: Florian Fainelli <f.fainelli@xxxxxxxxx>
• Re: [V3, 1/2] i2c: brcmstb: Add Broadcom settop SoC i2c controller driver
  • From: Ray Jui <rjui@xxxxxxxxxxxx>
• [PATCH] i2c: designware: separate ops for system_sleep_pm and runtime_pm
  • From: Jisheng Zhang <jszhang@xxxxxxxxxxx>
• Re: [PATCH 1/4] i2c: add FUNC flag for slave capabilities
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH 0/4] i2c: small updates to the slave framework
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• [PATCH v2] Add suspend/resume support to the iProc I2C driver
  • From: Ray Jui <rjui@xxxxxxxxxxxx>
• [PATCH v2] i2c: iproc: Add suspend/resume support
  • From: Ray Jui <rjui@xxxxxxxxxxxx>
• [PATCH] i2c: iproc: Add suspend/resume support
  • From: Ray Jui <rjui@xxxxxxxxxxxx>
• i2c bus driver for FTDI MPSSE
  • From: "Stevens, Nick" <Nick.Stevens@xxxxxxxx>
• [PATCH 4/4] i2c: slave: add error messages to slave core
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH 3/4] i2c: slave: docs: be more precise about the prerequsites
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH 2/4] i2c: rcar: report slave capabilities to users
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH 1/4] i2c: add FUNC flag for slave capabilities
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH 0/4] i2c: small updates to the slave framework
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v2] i2c: davinci: Refactor i2c_davinci_wait_bus_not_busy()
  • From: "Grygorii.Strashko@xxxxxxxxxx" <grygorii.strashko@xxxxxxxxxx>
• Re: [PATCH v2] i2c: davinci: Avoid sending to own address
  • From: "Grygorii.Strashko@xxxxxxxxxx" <grygorii.strashko@xxxxxxxxxx>
• Re: [PATCH v2 02/17] leds: port locomo leds driver to new locomo core
  • From: Jacek Anaszewski <j.anaszewski@xxxxxxxxxxx>
• Re: [PATCH] i2c: eeprom: at24: Provide an EEPROM framework interface
  • From: Pantelis Antoniou <panto@xxxxxxxxxxxxxxxxxxxxxxx>
• Correct i2c access semantics
  • From: Alessio Sangalli <alesan@xxxxxxxxxxx>
• Re: [PATCH] i2c: eeprom: at24: Provide an EEPROM framework interface
  • From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
• [V3, 1/2] i2c: brcmstb: Add Broadcom settop SoC i2c controller driver
  • From: Kamal Dasu <kdasu.kdev@xxxxxxxxx>
• [V3, 2/2] dt-bindings: i2c: Add i2c-brcmstb dt bindings
  • From: Kamal Dasu <kdasu.kdev@xxxxxxxxx>
• Re: [PATCH v2 02/17] leds: port locomo leds driver to new locomo core
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH v2 02/17] leds: port locomo leds driver to new locomo core
  • From: Jacek Anaszewski <j.anaszewski@xxxxxxxxxxx>
• Re: [PATCH v2 02/17] leds: port locomo leds driver to new locomo core
  • From: Dmitry Eremin-Solenikov <dbaryshkov@xxxxxxxxx>
• [PATCH v2] i2c: davinci: Refactor i2c_davinci_wait_bus_not_busy()
  • From: Alexander Sverdlin <alexander.sverdlin@xxxxxxxxx>
• [PATCH v2] i2c: davinci: Avoid sending to own address
  • From: Alexander Sverdlin <alexander.sverdlin@xxxxxxxxx>
• Re: [PATCH v2 02/17] leds: port locomo leds driver to new locomo core
  • From: Jacek Anaszewski <j.anaszewski@xxxxxxxxxxx>
• Re: [PATCH v2 01/17] mfd: add new driver for Sharp LoCoMo
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH v2] i2c: axxia: Add bus recovery functionality
  • From: Alexander Sverdlin <alexander.sverdlin@xxxxxxxxx>
• Re: [PATCH] i2c: axxia: Add bus recovery functionality
  • From: Alexander Sverdlin <alexander.sverdlin@xxxxxxxxx>
• Re: [PATCH v2 3/3] i2c / ACPI: Assign IRQ for devices that have GpioInt automatically
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v2 2/3] i2c / ACPI: Use 0 to indicate that device does not have interrupt assigned
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH] i2c: axxia: Add bus recovery functionality
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH] i2c: eeprom: at24: Provide an EEPROM framework interface
  • From: Pantelis Antoniou <pantelis.antoniou@xxxxxxxxxxxx>
• Re: [PATCH] i2c: axxia: Add bus recovery functionality
  • From: Michael Lawnick <michael.lawnick@xxxxxxxxx>
• Re: [PATCH 2/2] i2c: core: Reduce stack size of acpi_i2c_space_handler()
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: axxia: Add bus recovery functionality
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH] i2c: axxia: Add bus recovery functionality
  • From: Michael Lawnick <ml.lawnick@xxxxxx>
• Re: [PATCH 1/2] i2c: core: Remove needless structure member zero initialization
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 03/17] input: convert LoCoMo keyboard driver to use new locomo core
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH] i2c: scx200_acb: avoid I2C bus overclocking.
  • From: Svenning Sørensen <sss@xxxxxxxxxxx>
• Re: [PATCH v2 03/17] input: convert LoCoMo keyboard driver to use new locomo core
  • From: Dmitry Eremin-Solenikov <dbaryshkov@xxxxxxxxx>
• Re: [PATCH v2 04/17] input: locomokbd: provide an Alt-SysRQ combination
  • From: Dmitry Eremin-Solenikov <dbaryshkov@xxxxxxxxx>
• Re: [PATCH v2 01/17] mfd: add new driver for Sharp LoCoMo
  • From: Dmitry Eremin-Solenikov <dbaryshkov@xxxxxxxxx>
• Re: [PATCH v2 03/17] input: convert LoCoMo keyboard driver to use new locomo core
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH] i2c: scx200_acb: avoid I2C bus overclocking.
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH RESEND V4 4/4] arm64: dts: add proxy I2C device driver on APM X-Gene platform
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH RESEND V4 2/4] i2c: busses: xgene: add acpi support for i2c xgene SLIMpro driver
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v2 04/17] input: locomokbd: provide an Alt-SysRQ combination
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH RESEND V4 3/4] Documentation: i2c: Add APM X-Gene platform SLIMpro I2C driver documentation
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH RESEND V4 1/4] i2c: busses: add SLIMpro I2C device driver on APM X-Gene platform
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH RESEND V4 0/4] i2c: busses: xgene: I2C proxy driver for X-Gene
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v2 10/17] i2c: add locomo i2c driver
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v2 10/17] i2c: add locomo i2c driver
  • From: Dmitry Eremin-Solenikov <dbaryshkov@xxxxxxxxx>
• Re: [PATCH v2 10/17] i2c: add locomo i2c driver
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: omap: implement bus recovery
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: axxia: Add bus recovery functionality
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 2/2] i2c: core: Reduce stack size of acpi_i2c_space_handler()
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 1/2] i2c: core: Remove needless structure member zero initialization
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 1/4] i2c: imx: Constify platform_device_id
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: s3c2410: fix oops in suspend callback for non-dt platforms
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: hix5hd2: Fix modalias to make module auto-loading work
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v4] i2c: omap: Add calls for pinctrl state select
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v2] i2c: i2c-bcm2708: fixes cdiv uneven number
  • From: wsa@xxxxxxxxxxxxx
• Re: [PATCH v4] i2c: omap: Add calls for pinctrl state select
  • From: wsa@xxxxxxxxxxxxx
• Re: [PATCH v2 02/17] leds: port locomo leds driver to new locomo core
  • From: Dmitry Eremin-Solenikov <dbaryshkov@xxxxxxxxx>
• Re: [PATCH 06/27] i2c: Allow compile test of GPIO consumers if !GPIOLIB
  • From: wsa@xxxxxxxxxxxxx
• Re: [PATCH] i2c: xiic: Fix kerneldoc warnings
  • From: wsa@xxxxxxxxxxxxx
• Re: [PATCH v2] i2c: rk3x: Increase wait timeout to 1 second
  • From: wsa@xxxxxxxxxxxxx
• Re: [PATCH v2 3/3] i2c / ACPI: Assign IRQ for devices that have GpioInt automatically
  • From: wsa@xxxxxxxxxxxxx
• Re: [PATCH v2 2/3] i2c / ACPI: Use 0 to indicate that device does not have interrupt assigned
  • From: wsa@xxxxxxxxxxxxx
• Re: [PATCH v2 1/3] gpio / ACPI: Add support for retrieving GpioInt resources from a device
  • From: Antonio Ospite <ao2@xxxxxx>
• Re: [PATCH v7 3/3] I2C: mediatek: Add driver for MediaTek MT8173 I2C controller
  • From: wsa@xxxxxxxxxxxxx
• Re: [PATCH v7 2/3] I2C: mediatek: Add driver for MediaTek I2C controller
  • From: wsa@xxxxxxxxxxxxx
• Re: [PATCH v7 1/3] dt-bindings: Add I2C bindings for mt65xx/mt81xx.
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v7 0/3] ARM: mediatek: Add driver for Mediatek I2C
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v7 1/3] dt-bindings: Add I2C bindings for mt65xx/mt81xx.
  • From: wsa@xxxxxxxxxxxxx
• Re: [PATCH v2 08/17] gpio: locomo: implement per-pin irq handling
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v2] i2c: rk3x: Increase wait timeout to 1 second
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH] i2c: powermac: don't workaround for keywest
  • From: Benjamin Herrenschmidt <benh@xxxxxxxxxxxxxxxxxxx>
• [PATCH v2] i2c: rk3x: Increase wait timeout to 1 second
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH v2 3/3] i2c / ACPI: Assign IRQ for devices that have GpioInt automatically
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v2 2/3] i2c / ACPI: Use 0 to indicate that device does not have interrupt assigned
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v2 1/3] gpio / ACPI: Add support for retrieving GpioInt resources from a device
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH] i2c: powermac: don't workaround for keywest
  • From: wsa@xxxxxxxxxxxxx
• Re: [PATCH] i2c: hix5hd2: Fix modalias to make module auto-loading work
  • From: Zhangfei Gao <zhangfei.gao@xxxxxxxxxx>
• Re: [PATCH] i2c: powermac: don't workaround for keywest
  • From: Benjamin Herrenschmidt <benh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: powermac: don't workaround for keywest
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH] i2c: powermac: don't workaround for keywest
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [RFC] i2c-tools: i2ctransfer: add new tool
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [RFC] i2c-tools: i2ctransfer: add new tool
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [RFC] i2c-tools: i2ctransfer: add new tool
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [RFC] i2c-tools: i2ctransfer: add new tool
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [RFC] i2c-tools: i2ctransfer: add new tool
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• RE: [RFC] i2c-tools: i2ctransfer: add new tool
  • From: Randy Grunwell <rgrunwell@xxxxxxxxxx>
• Re: [PATCH] i2c: hix5hd2: Fix modalias to make module auto-loading work
  • From: Axel Lin <axel.lin@xxxxxxxxxx>
• Re: [PATCH] i2c: hix5hd2: Fix modalias to make module auto-loading work
  • From: zhangfei <zhangfei.gao@xxxxxxxxxx>
• Re: [RFC] i2c-tools: i2ctransfer: add new tool
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [RFC] i2c-tools: i2ctransfer: add new tool
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: Why isn't IRQ shared for i2c-ocore
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: Why isn't IRQ shared for i2c-ocore
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: Why isn't IRQ shared for i2c-ocore
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: Why isn't IRQ shared for i2c-ocore
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: Why isn't IRQ shared for i2c-ocore
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• [PATCH 1/1] i2c: documentation of how to set child bus numbers from the device tree
  • From: Bob Feretich <bob.feretich@xxxxxxxxxxxxxxx>
• [PATCH] i2c: hix5hd2: Fix modalias to make module auto-loading work
  • From: Axel Lin <axel.lin@xxxxxxxxxx>
• Re: [RFC] i2c-tools: i2ctransfer: add new tool
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: Why isn't IRQ shared for i2c-ocore
  • From: York Sun <yorksun@xxxxxxxxxxxxx>
• Re: [PATCH v7 0/3] ARM: mediatek: Add driver for Mediatek I2C
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v7 0/3] ARM: mediatek: Add driver for Mediatek I2C
  • From: Eddie Huang <eddie.huang@xxxxxxxxxxxx>
• Re: [PATCH v7 0/3] ARM: mediatek: Add driver for Mediatek I2C
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: Why isn't IRQ shared for i2c-ocore
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: Expanding Data Length
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: Regarding to force bus id for channels of pca954x
  • From: os user <gnusercn@xxxxxxxxx>
• Why isn't IRQ shared for i2c-ocore
  • From: York Sun <yorksun@xxxxxxxxxxxxx>
• Expanding Data Length
  • From: Randy Grunwell <rgrunwell@xxxxxxxxxx>
• Re: [PATCH] i2c: Mark instantiated device nodes with OF_POPULATE
  • From: Pantelis Antoniou <pantelis.antoniou@xxxxxxxxxxxx>
• Re: [PATCH] i2c: Mark instantiated device nodes with OF_POPULATE
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v2] i2c: i2c-bcm2708: fixes cdiv uneven number
  • From: Silvan Wicki <linux_wi@xxxxxxxx>
• Re: How to encode being an I2C slave in DT?
  • From: Stephen Warren <swarren@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: Mark instantiated device nodes with OF_POPULATE
  • From: Kevin Hilman <khilman@xxxxxxxxxx>
• Re: How to encode being an I2C slave in DT?
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: Regarding to force bus id for channels of pca954x
  • From: Bob Feretich <bob.feretich@xxxxxxxxxxxxxxx>
• Re: How to encode being an I2C slave in DT?
  • From: Stephen Warren <swarren@xxxxxxxxxxxxx>
• [PATCH] i2c: omap: implement bus recovery
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] i2c: omap: implement bus recovery
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v2 08/17] gpio: locomo: implement per-pin irq handling
  • From: Dmitry Eremin-Solenikov <dbaryshkov@xxxxxxxxx>
• Re: Regarding to force bus id for channels of pca954x
  • From: os user <gnusercn@xxxxxxxxx>
• Re: How to encode being an I2C slave in DT?
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: How to encode being an I2C slave in DT?
  • From: Stephen Warren <swarren@xxxxxxxxxxxxx>
• Re: [PATCH v2 02/17] leds: port locomo leds driver to new locomo core
  • From: Jacek Anaszewski <j.anaszewski@xxxxxxxxxxx>
• Re: [PATCH v2 17/17] ARM: drop old LoCoMo driver
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v2 14/17] ARM: pxa: poodle: use new LoCoMo driver
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v2 13/17] ASoC: pxa: poodle: make use of new locomo GPIO interface
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v2 08/17] gpio: locomo: implement per-pin irq handling
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v2 07/17] gpio: port LoCoMo gpio support from old driver
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH v4] i2c: omap: Add calls for pinctrl state select
  • From: pascal.huerst@xxxxxxxxx
• Re: [PATCH] i2c: xiic: Fix kerneldoc warnings
  • From: Shubhrajyoti Datta <omaplinuxkernel@xxxxxxxxx>
• Re: [PATCH v3] i2c: omap: Add calls for pinctrl state select
  • From: Sekhar Nori <nsekhar@xxxxxx>
• Re: [PATCH v3] i2c: omap: Add calls for pinctrl state select
  • From: Pascal Huerst <pascal.huerst@xxxxxxxxx>
• [PATCH v2 1/3] gpio / ACPI: Add support for retrieving GpioInt resources from a device
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• [PATCH v2 2/3] i2c / ACPI: Use 0 to indicate that device does not have interrupt assigned
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• [PATCH v2 3/3] i2c / ACPI: Assign IRQ for devices that have GpioInt automatically
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• [PATCH v2 0/3] ACPI: Translate Linux IRQ number directly from GpioInt
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 i2c/for-next] i1c: i801: recover from hardware PEC errors
  • From: Ellen Wang <ellen@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 i2c/for-next] i1c: i801: recover from hardware PEC errors
  • From: Jean Delvare <jdelvare@xxxxxxx>
• [PATCH v7 2/3] I2C: mediatek: Add driver for MediaTek I2C controller
  • From: Eddie Huang <eddie.huang@xxxxxxxxxxxx>
• [PATCH v7 3/3] I2C: mediatek: Add driver for MediaTek MT8173 I2C controller
  • From: Eddie Huang <eddie.huang@xxxxxxxxxxxx>
• [PATCH v7 1/3] dt-bindings: Add I2C bindings for mt65xx/mt81xx.
  • From: Eddie Huang <eddie.huang@xxxxxxxxxxxx>
• [PATCH v7 0/3] ARM: mediatek: Add driver for Mediatek I2C
  • From: Eddie Huang <eddie.huang@xxxxxxxxxxxx>
• Re: How to encode being an I2C slave in DT?
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: How to encode being an I2C slave in DT?
  • From: Marc Dietrich <marvin24@xxxxxx>
• Re: How to encode being an I2C slave in DT?
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH] i2c: xiic: Fix kerneldoc warnings
  • From: Shubhrajyoti Datta <shubhrajyoti.datta@xxxxxxxxxx>
• Re: [PATCH] i2c: s3c2410: fix oops in suspend callback for non-dt platforms
  • From: Kukjin Kim <kgene@xxxxxxxxxx>
• Re: [PATCH] i2c: s3c2410: fix oops in suspend callback for non-dt platforms
  • From: Kukjin Kim <kgene@xxxxxxxxxx>
• Re: How to encode being an I2C slave in DT?
  • From: Stephen Warren <swarren@xxxxxxxxxxxxx>
• [PATCH 06/27] i2c: Allow compile test of GPIO consumers if !GPIOLIB
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH] i2c: rk3x: Increase wait timeout to 1 second
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH] i2c: xiic: Fix kerneldoc warnings
  • From: <shubhrajyoti.datta@xxxxxxxxxx>
• How to encode being an I2C slave in DT?
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: s3c2410: fix oops in suspend callback for non-dt platforms
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [PATCH v2 i2c/for-next] i1c: i801: recover from hardware PEC errors
  • From: Ellen Wang <ellen@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: s3c2410: fix oops in suspend callback for non-dt platforms
  • From: Vasily Khoruzhick <anarsoul@xxxxxxxxx>
• Re: [PATCH] i2c: rk3x: Increase wait timeout to 1 second
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH] i2c: rk3x: Increase wait timeout to 1 second
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH] i2c: rk3x: Increase wait timeout to 1 second
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH] i2c: rk3x: Increase wait timeout to 1 second
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH v2] i2c: i2c-bcm2708: fixes cdiv uneven number
  • From: rajeev kumar <rajeevkumar.linux@xxxxxxxxx>
• Re: [PATCH] i2c: s3c2410: fix oops in suspend callback for non-dt platforms
  • From: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
• [PATCH] i2c: s3c2410: fix oops in suspend callback for non-dt platforms
  • From: Vasily Khoruzhick <anarsoul@xxxxxxxxx>
• [PATCH v2] i2c: i2c-bcm2708: fixes cdiv uneven number
  • From: Silvan Wicki <linux_wi@xxxxxxxx>
• [PATCH 1/4] i2c: imx: Constify platform_device_id
  • From: Krzysztof Kozlowski <k.kozlowski.k@xxxxxxxxx>
• [PATCH 2/4] i2c: mxs: Constify platform_device_id
  • From: Krzysztof Kozlowski <k.kozlowski.k@xxxxxxxxx>
• [PATCH 3/4] i2c: rcar: Constify platform_device_id
  • From: Krzysztof Kozlowski <k.kozlowski.k@xxxxxxxxx>
• [PATCH 4/4] i2c: s4c2410: Constify platform_device_id
  • From: Krzysztof Kozlowski <k.kozlowski.k@xxxxxxxxx>
• Re: [PATCH] i2c: i2c-bcm2708: fixes cdiv uneven number
  • From: rajeev kumar <rajeevkumar.linux@xxxxxxxxx>
• Re: [PATCH] i2c: rk3x: Increase wait timeout to 1 second
  • From: Caesar Wang <sasukewxt@xxxxxxx>
• Re: [PATCH] i2c: rk3x: Increase wait timeout to 1 second
  • From: Caesar Wang <sasukewxt@xxxxxxx>
• [PATCH] i2c: rk3x: Increase wait timeout to 1 second
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• [PATCH] i2c: i2c-bcm2708: fixes cdiv uneven number
  • From: Silvan Wicki <linux_wi@xxxxxxxx>
• Re: [PATCH v1 1/1] i2c: Add acpi support to enumerate i2c mux clients
  • From: sathyanarayanan kuppuswamy <sathyanarayanan.kuppuswamy@xxxxxxxxxxxxxxx>
• [PATCH 2/2] i2c: core: Reduce stack size of acpi_i2c_space_handler()
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• [PATCH 1/2] i2c: core: Remove needless structure member zero initialization
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: st: add include for pinctrl
  • From: Maxime Coquelin <maxime.coquelin@xxxxxx>
• Re: [PATCH v2 09/17] spi: add locomo SPI driver
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v6 1/3] dt-bindings: Add I2C bindings for mt65xx/mt81xx.
  • From: rajeev kumar <rajeevkumar.linux@xxxxxxxxx>
• Re: [PATCH v2 15/17] ARM: pxa: poodle: don't preallocate IRQ space for locomo
  • From: Robert Jarzmik <robert.jarzmik@xxxxxxx>
• Re: [PATCH v2 14/17] ARM: pxa: poodle: use new LoCoMo driver
  • From: Robert Jarzmik <robert.jarzmik@xxxxxxx>
• Re: [PATCH v2 01/17] mfd: add new driver for Sharp LoCoMo
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v2] omap: i2c: Add calls for pinctrl state select
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH v2] omap: i2c: Add calls for pinctrl state select
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH] i2c: axxia: Add bus recovery functionality
  • From: Alexander Sverdlin <alexander.sverdlin@xxxxxxxxx>
• [PATCH v3] i2c: omap: Add calls for pinctrl state select
  • From: pascal.huerst@xxxxxxxxx