Re: clock driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, May 26, 2015 at 12:12:11PM -0700, York Sun wrote:
> Linux experts,
> 
> I have rewritten a driver for Silicon Labs SI5338 programmable clock chip. The
> original driver was written by Andrey (CC'ed), but was floatingn outside of the
> kernel. The driver was written to use sysfs as the interface, not the common
> clock framework. I wonder if I have to rewrite the driver following common clock
> framework. One concern is to support a feature to accept ClockBuilder (TM)
> output on sysfs. I don't see sysfs support on common clock framework. Please
> correct me if I am wrong.
> 
> If not using common clock framework is acceptable, I would like to send a RFC
> patch for review.
> 
My original driver for si570 was rejected because it didn't support the clock
framework, so you might face an uphill battle.

SI provides a document for SI5338 describing how to configure it without
using clockbuilder [1]. Can that be used to implement generic code which
doesn't need clockbuilder ?

Guenter

---
[1] https://www.silabs.com/Support%20Documents/TechnicalDocs/Si5338-RM.pdf
--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux