Re: I2C class bitmask

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, May 21, 2015 at 02:07:31PM -0700, York Sun wrote:
> Lee,
> 
> Is there any convention regarding I2C class bitmask? I see only three are
> defined for 3.12.19 and four for 4.0
> 
> I2C_CLASS_HWMON, I2C_CLASS_DDC, I2C_CLASS_SPD, I2C_CLASS_DEPRECATED
> 
> I am working on a clock chip driver (SI5338) and trying to detect them (multiple
> chips in i2c mux). It would be a lot easier to have its own class, like
> I2C_CLASS_CLOCK. It is trivial to add a line to i2c.h file. Just checking if
> this is a bad idea.
> 

A class is supposed to indicate if a specific chip class is likely to be seen
on an i2c adapter, and that it may be necessary to auto-detect it (an example
are I2C_CLASS_HWMON type devices on PCs). The tendency, though, is to drop
existing markers for I2C_CLASS_xxx from adapter drivers as much as possible
because it slows down the boot process (see upstream commit 0c176170089c3).

Auto-detection (with the _detect function) is not a preferred means to
instantiate a device. It takes time, and it is more or less unreliable.
For some chips, a read on its i2c register space can result in a chip reset,
or it can cause it to lose its programming. Worst case it can turn a system
into a brick.

Preferred instantiations are listed in Documentation/i2c/instantiating-devices.
Instantiation with devicetree, ACPI, or through i2c_register_board_info()
would probably be the best available methods to instantiate a clock chip.

Given that, first question is why you would want to have the chip auto-detected
in the first place. Is there any reason to believe that explicit instantiation
would not work in your system ?  What are those reasons ?

On top of that, the SI5338 does not have a clean way to detect the chip.
It does not have a chip ID register, and it is multi-banked. Given the
similarities of the various Silicon Labs clock chips, it may not even be
possible to reliably distinguish it from other SI chips. So even if you
had a good reason to auto-detect the chip, it would be _very_ unreliable.
This seems to be quite undesirable and risky for a clock chip.
Are you really sure that you want and need that ?

Thanks,
Guenter
--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux