Linux Kernel I2C
[Prev Page][Next Page]
- [PATCH 3/3] i2c: Add Congatec CGEB I2C driver
- From: Mary Strodl <mstrodl@xxxxxxxxxxx>
- [PATCH 1/3] mm: vmalloc: export __vmalloc_node_range
- From: Mary Strodl <mstrodl@xxxxxxxxxxx>
- Re: [PULL REQUEST] i2c-for-6.11-rc1
- From: Linus Torvalds <torvalds@xxxxxxxxxxxxxxxxxxxx>
- Re: [PULL REQUEST] i2c-for-6.11-rc1
- From: Linus Torvalds <torvalds@xxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 4/9] mtd: devices: add AT24 eeprom support
- From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
- [PATCH 1/1] i2c: designware: Fix wrong setting for {ss,fs}_{h,l}cnt registers
- From: Adrian Huang <adrianhuang0701@xxxxxxxxx>
- Re: [PATCH v2 0/4] arm64: dts: qcom: add description of CCI controllers for sm8550 and sm8650
- From: Andi Shyti <andi.shyti@xxxxxxxxxx>
- Re: [PATCH v3 0/3] i2c: mux: gpio: Add 'settle-time-us' property
- From: Andi Shyti <andi.shyti@xxxxxxxxxx>
- Re: [PATCH v3 0/2] i2c: smbus cleanups and SPD support for piix4
- From: Andi Shyti <andi.shyti@xxxxxxxxxx>
- Re: [PATCH] of/platform: Fix inverted check in of_platform_notify()
- From: Stephen Boyd <sboyd@xxxxxxxxxx>
- Re: [PATCH v3 2/2] i2c: piix4: Register SPDs
- From: Andi Shyti <andi.shyti@xxxxxxxxxx>
- Re: [PATCH v3 2/2] i2c: piix4: Register SPDs
- From: Thomas Weißschuh <linux@xxxxxxxxxxxxxx>
- Re: [PATCH v3 2/2] i2c: piix4: Register SPDs
- From: Andi Shyti <andi.shyti@xxxxxxxxxx>
- Re: [PATCH v1 3/3] i2c: imx: prevent rescheduling in non dma mode
- From: Stefan Eichenberger <eichest@xxxxxxxxx>
- Re: [PATCH] MAINTAINERS: delete entries for Thor Thayer
- From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
- Re: [PATCH v7 1/8] of/platform: Allow overlays to create platform devices from the root node
- From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
- [PATCH] of/platform: Fix inverted check in of_platform_notify()
- From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
- Re: [PATCH v7 1/8] of/platform: Allow overlays to create platform devices from the root node
- From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
- [PULL REQUEST] i2c-for-6.11-rc1
- From: Wolfram Sang <wsa@xxxxxxxxxx>
- Re: [PATCH v2 32/60] i2c: mv64xxx: reword according to newest specification
- From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v2 32/60] i2c: mv64xxx: reword according to newest specification
- From: Gregory CLEMENT <gregory.clement@xxxxxxxxxxx>
- Re: [PATCH v2 32/60] i2c: mv64xxx: reword according to newest specification
- From: Gregory CLEMENT <gregory.clement@xxxxxxxxxxx>
- [PATCH 1/2] i2c: header: remove unneeded stuff regarding i2c_algorithm
- From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
- [PATCH 0/2] i2c: header: improve description of i2c_algorithm
- From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
- [PATCH 2/2] i2c: header: improve kdoc for i2c_algorithm
- From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v1 3/3] i2c: imx: prevent rescheduling in non dma mode
- From: Frank Li <Frank.li@xxxxxxx>
- Re: [PATCH v1 2/3] i2c: imx: separate atomic, dma and non-dma use case
- From: Frank Li <Frank.li@xxxxxxx>
- Re: [PATCH v1 1/3] i2c: imx: only poll for bus busy in multi master mode
- From: Frank Li <Frank.li@xxxxxxx>
- [PATCH v1 3/3] i2c: imx: prevent rescheduling in non dma mode
- From: Stefan Eichenberger <eichest@xxxxxxxxx>
- [PATCH v1 2/3] i2c: imx: separate atomic, dma and non-dma use case
- From: Stefan Eichenberger <eichest@xxxxxxxxx>
- [PATCH v1 1/3] i2c: imx: only poll for bus busy in multi master mode
- From: Stefan Eichenberger <eichest@xxxxxxxxx>
- [PATCH v1 0/3] i2c: imx: prevent rescheduling in non-dma mode
- From: Stefan Eichenberger <eichest@xxxxxxxxx>
- Re: [PATCH v4 4/6] sfc: falcon: Make I2C terminology more inclusive
- From: patchwork-bot+netdevbpf@xxxxxxxxxx
- Re: [PULL REQUEST] i2c-for-6.10-rc8
- From: pr-tracker-bot@xxxxxxxxxx
- [PULL REQUEST] i2c-for-6.10-rc8
- From: Wolfram Sang <wsa@xxxxxxxxxx>
- [PATCH] nvmem: core: Check read_only flag for force_ro in bin_attr_nvmem_write()
- From: Marek Vasut <marex@xxxxxxx>
- Re: [GIT PULL] i2c-host for v6.11
- From: Andi Shyti <andi.shyti@xxxxxxxxxx>
- Re: [GIT PULL] i2c-host for v6.11
- From: Andi Shyti <andi.shyti@xxxxxxxxxx>
- Re: [GIT PULL] i2c-host for v6.11
- From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
- Re: [GIT PULL] i2c-host for v6.11
- From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] i2c: document new callbacks in i2c_algorithm
- From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
- [GIT PULL] i2c-host for v6.11
- From: Andi Shyti <andi.shyti@xxxxxxxxxx>
- Re: [GIT PULL] i2c-host-fixes for v6.10-rc8
- From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
- [GIT PULL] i2c-host-fixes for v6.10-rc8
- From: Andi Shyti <andi.shyti@xxxxxxxxxx>
- Re: [PATCH v2] HID: mcp2221: Remove unnecessary semicolon
- From: Benjamin Tissoires <bentiss@xxxxxxxxxx>
- Re: [PATCH v3 0/2] fw_devlink overlay fix
- From: Herve Codina <herve.codina@xxxxxxxxxxx>
- Re: [PATCH v3 2/2] i2c: piix4: Register SPDs
- From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH i2c-tools] README: ask for DCO in contributions
- From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
- [PATCH i2c-tools] README: ask for DCO in contributions
- From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v3 1/2] i2c: smbus: remove i801 assumptions from SPD probing
- From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
- Re: [PATCH 0/2] Cleanup the MAINTAINER's file
- From: Andi Shyti <andi.shyti@xxxxxxxxxx>
- Re: [PATCH i2c-tools] eeprog: use force option when eeprog gets data from a pipe
- From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
- [PATCH] i2c: document new callbacks in i2c_algorithm
- From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
- RE: [PATCH v3 04/11] i2c: riic: Enable runtime PM autosuspend support
- From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
- Re: [PATCH v3 04/11] i2c: riic: Enable runtime PM autosuspend support
- From: claudiu beznea <claudiu.beznea@xxxxxxxxx>
- RE: [PATCH v3 04/11] i2c: riic: Enable runtime PM autosuspend support
- From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
- Re: [PATCH v3 04/11] i2c: riic: Enable runtime PM autosuspend support
- From: claudiu beznea <claudiu.beznea@xxxxxxxxx>
- RE: [PATCH v3 04/11] i2c: riic: Enable runtime PM autosuspend support
- From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
- Re: [PATCH v3 1/3] dt-bindings: i2c: gpio: Add 'settle-time-us' property
- From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v3 3/3] i2c: mux: gpio: Add support for the 'settle-time-us' property
- From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v3 0/2] i2c: smbus cleanups and SPD support for piix4
- From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 0/2] Cleanup the MAINTAINER's file
- From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
- [PATCH] i2c: designware: Adjust LOW period of the SCL clock
- From: Bruce Li <Bruce.Li@xxxxxxxxxxxxxxxxxxx>
- [PATCH 1/2] MAINTAINERS: i2c-virtio: Drop Conghui Chen from Maintainers
- From: Andi Shyti <andi.shyti@xxxxxxxxxx>
- Re: [PATCH v3 0/2] i2c: smbus cleanups and SPD support for piix4
- From: Andi Shyti <andi.shyti@xxxxxxxxxx>
- Re: [PATCH v2 1/3] dt-bindings: i2c: amlogic,meson6-i2c: add optional power-domains
- From: Andi Shyti <andi.shyti@xxxxxxxxxx>
- Re: [PATCH] i2c: testunit: avoid re-issued work after read message
- From: Andi Shyti <andi.shyti@xxxxxxxxxx>
- Re: [PATCH] i2c: rcar: ensure Gen3+ reset does not disturb local targets
- From: Andi Shyti <andi.shyti@xxxxxxxxxx>
- Re: [PATCH] dt-bindings: i2c: at91: Add sama7d65 compatible string
- From: Andi Shyti <andi.shyti@xxxxxxxxxx>
- [PATCH 2/2] MAINTAINERS: Drop Thor Thayer from maintainers
- From: Andi Shyti <andi.shyti@xxxxxxxxxx>
- [PATCH 0/2] Cleanup the MAINTAINER's file
- From: Andi Shyti <andi.shyti@xxxxxxxxxx>
- Re: [PATCH] i2c: rcar: ensure Gen3+ reset does not disturb local targets
- From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v2 00/60] i2c: reword first drivers according to newest specification
- From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v2 56/60] i2c: viai2c: reword according to newest specification
- From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] i2c: rcar: clear NO_RXDMA flag after resetting
- From: Andi Shyti <andi.shyti@xxxxxxxxxx>
- Re: [PATCH v2 00/60] i2c: reword first drivers according to newest specification
- From: Andi Shyti <andi.shyti@xxxxxxxxxx>
- Re: [PATCH v2 58/60] i2c: virtio: reword according to newest specification
- From: Andi Shyti <andi.shyti@xxxxxxxxxx>
- Re: [PATCH v2 60/60] i2c: st: reword according to newest specification
- From: Andi Shyti <andi.shyti@xxxxxxxxxx>
- Re: [PATCH v2 57/60] i2c: nvidia-gpu: reword according to newest specification
- From: Andi Shyti <andi.shyti@xxxxxxxxxx>
- Re: [PATCH v2 56/60] i2c: viai2c: reword according to newest specification
- From: Andi Shyti <andi.shyti@xxxxxxxxxx>
- Re: [PATCH v2 55/60] i2c: viperboard: reword according to newest specification
- From: Andi Shyti <andi.shyti@xxxxxxxxxx>
- Re: [PATCH v2 54/60] i2c: uniphier: reword according to newest specification
- From: Andi Shyti <andi.shyti@xxxxxxxxxx>
- Re: [PATCH v2 53/60] i2c: uniphier-f: reword according to newest specification
- From: Andi Shyti <andi.shyti@xxxxxxxxxx>
- Re: [PATCH v2 52/60] i2c: tiny-usb: reword according to newest specification
- From: Andi Shyti <andi.shyti@xxxxxxxxxx>
- Re: [PATCH v2 51/60] i2c: thunderx-pcidrv: reword according to newest specification
- From: Andi Shyti <andi.shyti@xxxxxxxxxx>
- [PATCH] i2c: testunit: avoid re-issued work after read message
- From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
- [PATCH v3 11/11] arm64: dts: renesas: rzg3s-smarc-som: Enable i2c1 node
- From: Claudiu <claudiu.beznea@xxxxxxxxx>
- [PATCH v3 10/11] arm64: dts: renesas: rzg3s-smarc: Enable i2c0 node
- From: Claudiu <claudiu.beznea@xxxxxxxxx>
- [PATCH v3 04/11] i2c: riic: Enable runtime PM autosuspend support
- From: Claudiu <claudiu.beznea@xxxxxxxxx>
- [PATCH v3 09/11] arm64: dts: renesas: r9a08g045: Add I2C nodes
- From: Claudiu <claudiu.beznea@xxxxxxxxx>
- [PATCH v3 08/11] i2c: riic: Add support for fast mode plus
- From: Claudiu <claudiu.beznea@xxxxxxxxx>
- [PATCH v3 07/11] dt-bindings: i2c: renesas,riic: Document the R9A08G045 support
- From: Claudiu <claudiu.beznea@xxxxxxxxx>
- [PATCH v3 06/11] i2c: riic: Define individual arrays to describe the register offsets
- From: Claudiu <claudiu.beznea@xxxxxxxxx>
- [PATCH v3 05/11] i2c: riic: Add suspend/resume support
- From: Claudiu <claudiu.beznea@xxxxxxxxx>
- [PATCH v3 02/11] i2c: riic: Call pm_runtime_get_sync() when need to access registers
- From: Claudiu <claudiu.beznea@xxxxxxxxx>
- [PATCH v3 03/11] i2c: riic: Use pm_runtime_resume_and_get()
- From: Claudiu <claudiu.beznea@xxxxxxxxx>
- [PATCH v3 01/11] i2c: riic: Use temporary variable for struct device
- From: Claudiu <claudiu.beznea@xxxxxxxxx>
- [PATCH v3 00/11] i2c: riic: Add support for Renesas RZ/G3S
- From: Claudiu <claudiu.beznea@xxxxxxxxx>
- Re: [PATCH v4 3/6] drm/i915: Make I2C terminology more inclusive
- From: Andi Shyti <andi.shyti@xxxxxxxxxxxxxxx>
- Re: [PATCH v2 09/12] i2c: riic: Add support for fast mode plus
- From: claudiu beznea <claudiu.beznea@xxxxxxxxx>
- Re: [PATCH v2 50/60] i2c: tegra-bpmp: reword according to newest specification
- From: Andi Shyti <andi.shyti@xxxxxxxxxx>
- Re: [PATCH v2 49/60] i2c: taos-evm: reword according to newest specification
- From: Andi Shyti <andi.shyti@xxxxxxxxxx>
- Re: [PATCH v2 48/60] i2c: sun6i-p2wi: reword according to newest specification
- From: Andi Shyti <andi.shyti@xxxxxxxxxx>
- Re: [PATCH v2 47/60] i2c: stm32f4: reword according to newest specification
- From: Andi Shyti <andi.shyti@xxxxxxxxxx>
- Re: [PATCH v2 46/60] i2c: sprd: reword according to newest specification
- From: Andi Shyti <andi.shyti@xxxxxxxxxx>
- Re: [PATCH v2 45/60] i2c: sis5595: reword according to newest specification
- From: Andi Shyti <andi.shyti@xxxxxxxxxx>
- Re: [PATCH v2 44/60] i2c: rzv2m: reword according to newest specification
- From: Andi Shyti <andi.shyti@xxxxxxxxxx>
- Re: [PATCH v2 43/60] i2c: robotfuzz-osif: reword according to newest specification
- From: Andi Shyti <andi.shyti@xxxxxxxxxx>
- Re: [PATCH v2 42/60] i2c: rk3x: reword according to newest specification
- From: Andi Shyti <andi.shyti@xxxxxxxxxx>
- Re: [PATCH v2 41/60] i2c: riic: reword according to newest specification
- From: Andi Shyti <andi.shyti@xxxxxxxxxx>
- Re: [PATCH v2 32/60] i2c: mv64xxx: reword according to newest specification
- From: Andi Shyti <andi.shyti@xxxxxxxxxx>
- Re: [PATCH v4 6/6] fbdev/viafb: Make I2C terminology more inclusive
- From: Helge Deller <deller@xxxxxx>
- Re: [PATCH v4 5/6] fbdev/smscufx: Make I2C terminology more inclusive
- From: Helge Deller <deller@xxxxxx>
- Re: [PATCH v2 1/4] dt-bindings: i2c: qcom-cci: Document sm8550 compatible
- From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] i2c: mark HostNotify target address as used
- From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] i2c: mark HostNotify target address as used
- From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] MAINTAINERS: delete entry for Conghui Chen
- From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] MAINTAINERS: delete entries for Thor Thayer
- From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] MAINTAINERS: delete entry for Conghui Chen
- From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] MAINTAINERS: delete entry for Conghui Chen
- From: "Chen, Jian Jun" <jian.jun.chen@xxxxxxxxx>
- Re: [PATCH] MAINTAINERS: delete entry for Conghui Chen
- From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
- Re: [PATCH] MAINTAINERS: delete entry for Conghui Chen
- From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
- [PATCH] i2c: rcar: ensure Gen3+ reset does not disturb local targets
- From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v2 40/60] i2c: pxa-pci: reword according to newest specification
- From: Andi Shyti <andi.shyti@xxxxxxxxxx>
- Re: [PATCH v2 39/60] i2c: powermac: reword according to newest specification
- From: Andi Shyti <andi.shyti@xxxxxxxxxx>
- Re: [PATCH v2 38/60] i2c: piix4: reword according to newest specification
- From: Andi Shyti <andi.shyti@xxxxxxxxxx>
- Re: [PATCH v2 37/60] i2c: pasemi: reword according to newest specification
- From: Andi Shyti <andi.shyti@xxxxxxxxxx>
- Re: [PATCH v2 36/60] i2c: owl: reword according to newest specification
- From: Andi Shyti <andi.shyti@xxxxxxxxxx>
- Re: [PATCH v2 35/60] i2c: opal: reword according to newest specification
- From: Andi Shyti <andi.shyti@xxxxxxxxxx>
- Re: [PATCH v2 32/60] i2c: mv64xxx: reword according to newest specification
- From: Andi Shyti <andi.shyti@xxxxxxxxxx>
- Re: [PATCH v2 34/60] i2c: octeon: reword according to newest specification
- From: Andi Shyti <andi.shyti@xxxxxxxxxx>
- Re: [PATCH v2 33/60] i2c: ocores: reword according to newest specification
- From: Andi Shyti <andi.shyti@xxxxxxxxxx>
- Re: [PATCH v2 09/12] i2c: riic: Add support for fast mode plus
- From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
- Re: [PATCH 1/2] hwmon: (pmbus/ltc4286) Improve device matching
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxx>
- Re: [PATCH v2 2/3] dt-bindings: thermal: amlogic,thermal: add optional power-domains
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH] dt-bindings: i2c: at91: Add sama7d65 compatible string
- From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
- [PATCH v4 6/6] fbdev/viafb: Make I2C terminology more inclusive
- From: Easwar Hariharan <eahariha@xxxxxxxxxxxxxxxxxxx>
- [PATCH v4 5/6] fbdev/smscufx: Make I2C terminology more inclusive
- From: Easwar Hariharan <eahariha@xxxxxxxxxxxxxxxxxxx>
- [PATCH v4 4/6] sfc: falcon: Make I2C terminology more inclusive
- From: Easwar Hariharan <eahariha@xxxxxxxxxxxxxxxxxxx>
- [PATCH v4 3/6] drm/i915: Make I2C terminology more inclusive
- From: Easwar Hariharan <eahariha@xxxxxxxxxxxxxxxxxxx>
- [PATCH v4 2/6] drm/gma500: Make I2C terminology more inclusive
- From: Easwar Hariharan <eahariha@xxxxxxxxxxxxxxxxxxx>
- [PATCH v4 1/6] drm/amdgpu, drm/radeon: Make I2C terminology more inclusive
- From: Easwar Hariharan <eahariha@xxxxxxxxxxxxxxxxxxx>
- [PATCH v4 0/6] Make I2C terminology more inclusive for I2C Algobit and consumers
- From: Easwar Hariharan <eahariha@xxxxxxxxxxxxxxxxxxx>
- [PATCH v2 3/3] arm64: dts: meson: a1: bind power domain to temperature sensor
- From: George Stark <gnstark@xxxxxxxxxxxxxxxxx>
- [PATCH v2 1/3] dt-bindings: i2c: amlogic,meson6-i2c: add optional power-domains
- From: George Stark <gnstark@xxxxxxxxxxxxxxxxx>
- [PATCH v2 0/3] amlogic SoC's power-domains fixes
- From: George Stark <gnstark@xxxxxxxxxxxxxxxxx>
- [PATCH v2 2/3] dt-bindings: thermal: amlogic,thermal: add optional power-domains
- From: George Stark <gnstark@xxxxxxxxxxxxxxxxx>
- Re: [PATCH v2 32/60] i2c: mv64xxx: reword according to newest specification
- From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v2 32/60] i2c: mv64xxx: reword according to newest specification
- From: Andi Shyti <andi.shyti@xxxxxxxxxx>
- Re: [PATCH v2 31/60] i2c: mt7621: reword according to newest specification
- From: Andi Shyti <andi.shyti@xxxxxxxxxx>
- Re: [PATCH v2 30/60] i2c: mpc: reword according to newest specification
- From: Andi Shyti <andi.shyti@xxxxxxxxxx>
- Re: [PATCH v2 29/60] i2c: mlxcpld: reword according to newest specification
- From: Andi Shyti <andi.shyti@xxxxxxxxxx>
- Re: [PATCH v2 28/60] i2c: ls2x: reword according to newest specification
- From: Andi Shyti <andi.shyti@xxxxxxxxxx>
- Re: [PATCH v2 27/60] i2c: lpc2k: reword according to newest specification
- From: Andi Shyti <andi.shyti@xxxxxxxxxx>
- Re: [PATCH v2 26/60] i2c: ljca: reword according to newest specification
- From: Andi Shyti <andi.shyti@xxxxxxxxxx>
- Re: [PATCH v2 25/60] i2c: kempld: reword according to newest specification
- From: Andi Shyti <andi.shyti@xxxxxxxxxx>
- Re: [PATCH v2 24/60] i2c: jz4780: reword according to newest specification
- From: Andi Shyti <andi.shyti@xxxxxxxxxx>
- Re: [PATCH v2 23/60] i2c: isch: reword according to newest specification
- From: Andi Shyti <andi.shyti@xxxxxxxxxx>
- Re: [PATCH v2 22/60] i2c: iop3xx: reword according to newest specification
- From: Andi Shyti <andi.shyti@xxxxxxxxxx>
- Re: [PATCH v2 21/60] i2c: ibm_iic: reword according to newest specification
- From: Andi Shyti <andi.shyti@xxxxxxxxxx>
- Re: [PATCH 1/2] hwmon: (pmbus/ltc4286) Improve device matching
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
- [PATCH v3 1/2] misc: keba: Add basic KEBA CP500 system FPGA support
- From: Gerhard Engleder <gerhard@xxxxxxxxxxxxxxxxxxxxx>
- [PATCH v3 0/2] I2C controller support for KEBA PLCs
- From: Gerhard Engleder <gerhard@xxxxxxxxxxxxxxxxxxxxx>
- [PATCH v3 2/2] i2c: keba: Add KEBA I2C controller support
- From: Gerhard Engleder <gerhard@xxxxxxxxxxxxxxxxxxxxx>
- Re:
- From: Bence Csókás <bence98@xxxxxxxxxx>
- Re: [PATCH 1/4] dt-bindings: spi: amlogic,a1-spifc: make power-domains required
- From: neil.armstrong@xxxxxxxxxx
- [PATCH] dt-bindings: i2c: at91: Add sama7d65 compatible string
- From: <nicolas.ferre@xxxxxxxxxxxxx>
- Re: [PATCH 1/4] dt-bindings: spi: amlogic,a1-spifc: make power-domains required
- From: George Stark <gnstark@xxxxxxxxxxxxxxxxx>
- Re: [PATCH 1/2] hwmon: (pmbus/ltc4286) Improve device matching
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxx>
- Re: [PATCH v2 09/12] i2c: riic: Add support for fast mode plus
- From: claudiu beznea <claudiu.beznea@xxxxxxxxx>
- Re: [PATCH 2/2] hwmon: (pmbus/ltc4286) Drop unused i2c device ids
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
- Re: [PATCH 1/2] hwmon: (pmbus/ltc4286) Improve device matching
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
- Re: [PATCH 5/9] ARM: defconfig: convert to MTD_EEPROM_AT24
- From: "Arnd Bergmann" <arnd@xxxxxxxx>
- Re: (subset) [PATCH v3 0/3] Add I2C support on TH1520
- From: Andi Shyti <andi.shyti@xxxxxxxxxx>
- Re: [PATCH 5/9] ARM: defconfig: convert to MTD_EEPROM_AT24
- From: Bartosz Golaszewski <brgl@xxxxxxxx>
- Re: [PATCH 5/9] ARM: defconfig: convert to MTD_EEPROM_AT24
- From: "Arnd Bergmann" <arnd@xxxxxxxx>
- [PATCH] i2c: rcar: clear NO_RXDMA flag after resetting
- From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] i2c: mark HostNotify target address as used
- From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxx>
- [PATCH] i2c: mark HostNotify target address as used
- From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
- [PATCH 2/2] hwmon: (pmbus/ltc4286) Drop unused i2c device ids
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxx>
- [PATCH 1/2] hwmon: (pmbus/ltc4286) Improve device matching
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxx>
- [PATCH 0/2] hwmon: (pmbus/ltc4286) two patches about device matching
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxx>
- Re: (subset) [PATCH v3 0/3] Add I2C support on TH1520
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v2 20/60] i2c: i801: reword according to newest specification
- From: Andi Shyti <andi.shyti@xxxxxxxxxx>
- Re: [PATCH v2 19/60] i2c: hix5hd2: reword according to newest specification
- From: Andi Shyti <andi.shyti@xxxxxxxxxx>
- Re: [PATCH v2 18/60] i2c: hisi: reword according to newest specification
- From: Andi Shyti <andi.shyti@xxxxxxxxxx>
- Re: [PATCH v2 17/60] i2c: highlander: reword according to newest specification
- From: Andi Shyti <andi.shyti@xxxxxxxxxx>
- Re: [PATCH v2 15/60] i2c: fsi: reword according to newest specification
- From: Andi Shyti <andi.shyti@xxxxxxxxxx>
- Re: [PATCH v2 13/60] i2c: diolan-u2c: reword according to newest specification
- From: Andi Shyti <andi.shyti@xxxxxxxxxx>
- Re: [PATCH v2 12/60] i2c: digicolor: reword according to newest specification
- From: Andi Shyti <andi.shyti@xxxxxxxxxx>
- Re: [PATCH v3 0/3] i2c: mux: gpio: Add 'settle-time-us' property
- From: Peter Rosin <peda@xxxxxxxxxx>
- Re: [PATCH v2 11/60] i2c: davinci: reword according to newest specification
- From: Andi Shyti <andi.shyti@xxxxxxxxxx>
- Re: [PATCH v3 3/3] i2c: mux: gpio: Add support for the 'settle-time-us' property
- From: Peter Rosin <peda@xxxxxxxxxx>
- Re: [PATCH v3 2/3] i2c: mux: gpio: Re-order #include to match alphabetic order
- From: Peter Rosin <peda@xxxxxxxxxx>
- Re: [PATCH v2 3/3] i2c: rcar: minor changes to adhere to coding style
- From: Andi Shyti <andi.shyti@xxxxxxxxxx>
- Re: [PATCH v3 1/3] dt-bindings: i2c: gpio: Add 'settle-time-us' property
- From: Peter Rosin <peda@xxxxxxxxxx>
- Re: (subset) [PATCH v3 0/3] Add I2C support on TH1520
- From: Andi Shyti <andi.shyti@xxxxxxxxxx>
- [PATCH] i2c: testunit: correct Kconfig description
- From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
- [PATCH v3] i2c: cp2615: reword according to newest specification
- From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
- Re: [GIT PULL] at24: updates for v6.11-rc1
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH v2] i2c: add debug message for detected HostNotify alerts
- From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v2 3/3] i2c: rcar: minor changes to adhere to coding style
- From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v3 1/2] i2c: smbus: remove i801 assumptions from SPD probing
- From: Andi Shyti <andi.shyti@xxxxxxxxxx>
- Re: [PATCH v2 10/60] i2c: cros-ec-tunnel: reword according to newest specification
- From: Andi Shyti <andi.shyti@xxxxxxxxxx>
- Re: [PATCH v2 09/60] i2c: cp2615: reword according to newest specification
- From: Andi Shyti <andi.shyti@xxxxxxxxxx>
- Re: [PATCH v2 06/60] i2c: bcm2835: reword according to newest specification
- From: Andi Shyti <andi.shyti@xxxxxxxxxx>
- Re: [PATCH v2 04/60] i2c: au1550: reword according to newest specification
- From: Andi Shyti <andi.shyti@xxxxxxxxxx>
- Re: [PATCH v3 0/3] i2c: mux: gpio: Add 'settle-time-us' property
- From: Andi Shyti <andi.shyti@xxxxxxxxxx>
- Re: [PATCH v3 3/3] i2c: mux: gpio: Add support for the 'settle-time-us' property
- From: Andi Shyti <andi.shyti@xxxxxxxxxx>
- [PROBLEM linux-next] drivers/comedi/drivers/tests/../ni_stc.h:1140:35: error: ‘range_ni_E_ao_ext’ defined but not used [-Werror=unused-const-variable=]
- From: Mirsad Todorovac <mtodorovac69@xxxxxxxxx>
- Re: [PATCH v3 2/3] i2c: mux: gpio: Re-order #include to match alphabetic order
- From: Andi Shyti <andi.shyti@xxxxxxxxxx>
- Re: [PATCH v3 1/3] dt-bindings: i2c: gpio: Add 'settle-time-us' property
- From: Andi Shyti <andi.shyti@xxxxxxxxxx>
- [PATCH v3 0/2] i2c: smbus cleanups and SPD support for piix4
- From: Thomas Weißschuh <linux@xxxxxxxxxxxxxx>
- [PATCH v3 2/2] i2c: piix4: Register SPDs
- From: Thomas Weißschuh <linux@xxxxxxxxxxxxxx>
- [PATCH v3 1/2] i2c: smbus: remove i801 assumptions from SPD probing
- From: Thomas Weißschuh <linux@xxxxxxxxxxxxxx>
- Re: [PATCH v2 1/4] i2c: smbus: only limit max banks to eight
- From: Thomas Weißschuh <thomas@xxxxxxxx>
- Re: [PATCH 2/4] dt-bindings: i2c: amlogic,meson6-i2c: add optional power-domains
- From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
- Re: [PATCH v2 15/60] i2c: fsi: reword according to newest specification
- From: Eddie James <eajames@xxxxxxxxxxxxx>
- Re: [PATCH v2 47/60] i2c: stm32f4: reword according to newest specification
- From: Pierre Yves MORDRET <pierre-yves.mordret@xxxxxxxxxxx>
- Generic i2c recovery, STOP condition question
- From: Kirill Yatsenko <kiriyatsenko@xxxxxxxxx>
- Re: [PATCH v2 47/60] i2c: stm32f4: reword according to newest specification
- From: Alain Volmat <alain.volmat@xxxxxxxxxxx>
- Re: [PATCH 4/9] mtd: devices: add AT24 eeprom support
- From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
- Re: [PATCH v2 60/60] i2c: st: reword according to newest specification
- From: Alain Volmat <alain.volmat@xxxxxxxxxxx>
- Re: [PATCH 4/9] mtd: devices: add AT24 eeprom support
- From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
- Re: [PATCH 4/9] mtd: devices: add AT24 eeprom support
- From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
- Re: [PATCH 2/4] dt-bindings: i2c: amlogic,meson6-i2c: add optional power-domains
- From: neil.armstrong@xxxxxxxxxx
- Re: [PATCH 0/4] amlogic SoC's power-domains fixes
- From: neil.armstrong@xxxxxxxxxx
- Re: [PATCH 4/4] arm64: dts: meson: a1: bind power domain to temperature sensor
- From: neil.armstrong@xxxxxxxxxx
- [PATCH v2] HID: mcp2221: Remove unnecessary semicolon
- From: Chen Ni <nichen@xxxxxxxxxxx>
- Re: [PATCH v2] i2c: mt7621: Add Airoha EN7581 i2c support
- From: Andi Shyti <andi.shyti@xxxxxxxxxx>
- Re: [PATCH] i2c: designware: Constify read-only struct regmap_config
- From: Andi Shyti <andi.shyti@xxxxxxxxxx>
- Re: [PATCH v2 1/3] i2c: rcar: bring hardware to known state when probing
- From: Andi Shyti <andi.shyti@xxxxxxxxxx>
- Re: [PATCH v5 3/8] dt-bindings: i2c: add support for tsd,mule
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v5 1/8] dt-bindings: i2c: add support for tsd,mule-i2c-mux
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v5 3/8] dt-bindings: i2c: add support for tsd,mule
- From: Rob Herring <robh@xxxxxxxxxx>
- [PATCH v2] i2c: mt7621: Add Airoha EN7581 i2c support
- From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
- Re: [PATCH v2 3/3] i2c: rcar: minor changes to adhere to coding style
- From: Andi Shyti <andi.shyti@xxxxxxxxxx>
- Re: [PATCH 1/4] dt-bindings: spi: amlogic,a1-spifc: make power-domains required
- From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
- Re: [PATCH v5 4/8] hwmon: (amc6821) add support for tsd,mule
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
- Re: [PATCH 3/4] dt-bindings: thermal: amlogic,thermal: add power-domains
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH 1/4] dt-bindings: spi: amlogic,a1-spifc: make power-domains required
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- [PATCH 4/4] arm64: dts: meson: a1: bind power domain to temperature sensor
- From: George Stark <gnstark@xxxxxxxxxxxxxxxxx>
- [PATCH 1/4] dt-bindings: spi: amlogic,a1-spifc: make power-domains required
- From: George Stark <gnstark@xxxxxxxxxxxxxxxxx>
- [PATCH 2/4] dt-bindings: i2c: amlogic,meson6-i2c: add optional power-domains
- From: George Stark <gnstark@xxxxxxxxxxxxxxxxx>
- [PATCH 0/4] amlogic SoC's power-domains fixes
- From: George Stark <gnstark@xxxxxxxxxxxxxxxxx>
- [PATCH 3/4] dt-bindings: thermal: amlogic,thermal: add power-domains
- From: George Stark <gnstark@xxxxxxxxxxxxxxxxx>
- Re: [PATCH v5 3/8] dt-bindings: i2c: add support for tsd,mule
- From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
- [PATCH v5 8/8] arm64: dts: rockchip: add tsd,mule-i2c-mux on px30-ringneck
- From: Farouk Bouabid <farouk.bouabid@xxxxxxxxx>
- [PATCH v5 7/8] arm64: dts: rockchip: add tsd,mule-i2c-mux on rk3588-tiger
- From: Farouk Bouabid <farouk.bouabid@xxxxxxxxx>
- [PATCH v5 6/8] arm64: dts: rockchip: add tsd,mule-i2c-mux on rk3399-puma
- From: Farouk Bouabid <farouk.bouabid@xxxxxxxxx>
- [PATCH v5 4/8] hwmon: (amc6821) add support for tsd,mule
- From: Farouk Bouabid <farouk.bouabid@xxxxxxxxx>
- [PATCH v5 5/8] arm64: dts: rockchip: add tsd,mule-i2c-mux on rk3588-jaguar
- From: Farouk Bouabid <farouk.bouabid@xxxxxxxxx>
- [PATCH v5 3/8] dt-bindings: i2c: add support for tsd,mule
- From: Farouk Bouabid <farouk.bouabid@xxxxxxxxx>
- [PATCH v5 0/8] Add tsd,mule-i2c-mux support
- From: Farouk Bouabid <farouk.bouabid@xxxxxxxxx>
- [PATCH v5 1/8] dt-bindings: i2c: add support for tsd,mule-i2c-mux
- From: Farouk Bouabid <farouk.bouabid@xxxxxxxxx>
- [PATCH v5 2/8] i2c: muxes: add support for tsd,mule-i2c multiplexer
- From: Farouk Bouabid <farouk.bouabid@xxxxxxxxx>
- Re: [PATCH] HID: mcp2221: Remove unneeded semicolon
- From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
- Re: [PATCH v6 00/20] ARM: dts: aspeed: Add IBM P11 BMC systems
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v2 24/60] i2c: jz4780: reword according to newest specification
- From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
- Re: [PATCH v2 3/3] i2c: rcar: minor changes to adhere to coding style
- From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
- RE: [PATCH v2 04/12] i2c: riic: Use pm_runtime_resume_and_get()
- From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
- Re: [PATCH 4/9] mtd: devices: add AT24 eeprom support
- From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
- Re: [PATCH] MAINTAINERS: delete entry for Conghui Chen
- From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
- Re: [PATCH v2 58/60] i2c: virtio: reword according to newest specification
- From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
- RE: [PATCH v2 04/12] i2c: riic: Use pm_runtime_resume_and_get()
- From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
- Re: [PATCH v2 04/12] i2c: riic: Use pm_runtime_resume_and_get()
- From: claudiu beznea <claudiu.beznea@xxxxxxxxx>
- Re: [PATCH v2 02/12] i2c: riic: Use temporary variable for struct device
- From: claudiu beznea <claudiu.beznea@xxxxxxxxx>
- Re: [PATCH v2 30/60] i2c: mpc: reword according to newest specification
- From: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v2 08/60] i2c: cht-wc: reword according to newest specification
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- Re: [PATCH v2 3/3] i2c: rcar: minor changes to adhere to coding style
- From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v2 37/60] i2c: pasemi: reword according to newest specification
- From: Sven Peter <sven@xxxxxxxxxxxxx>
- Re: [PATCH v2 3/3] i2c: rcar: minor changes to adhere to coding style
- From: Markus Elfring <Markus.Elfring@xxxxxx>
- [PATCH v2 2/3] i2c: rcar: WARN about spurious irqs
- From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
- [PATCH v2 1/3] i2c: rcar: bring hardware to known state when probing
- From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
- [PATCH v2 3/3] i2c: rcar: minor changes to adhere to coding style
- From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
- [PATCH v2 0/3] i2c: rcar: avoid spurious irqs
- From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
- Re: Regression caused by "eeprom: at24: Probe for DDR3 thermal sensor in the SPD case" - "sysfs: cannot create duplicate filename"
- From: Krzysztof Olędzki <ole@xxxxxx>
- Re: [PULL REQUEST] i2c-for-6.10-rc7
- From: pr-tracker-bot@xxxxxxxxxx
- Re: [PATCH v2 09/60] i2c: cp2615: reword according to newest specification
- From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v2 09/60] i2c: cp2615: reword according to newest specification
- From: Bence Csókás <bence98@xxxxxxxxxx>
- [PATCH] MAINTAINERS: delete entry for Conghui Chen
- From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
- [PATCH] MAINTAINERS: delete entries for Thor Thayer
- From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v2 13/60] i2c: diolan-u2c: reword according to newest specification
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
- [PULL REQUEST] i2c-for-6.10-rc7
- From: Wolfram Sang <wsa@xxxxxxxxxx>
- Re: [PATCH v2 48/60] i2c: sun6i-p2wi: reword according to newest specification
- From: Chen-Yu Tsai <wens@xxxxxxxx>
- [PATCH v2 60/60] i2c: st: reword according to newest specification
- From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
- [PATCH v2 59/60] i2c: cpm: reword according to newest specification
- From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
- [PATCH v2 58/60] i2c: virtio: reword according to newest specification
- From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
- [PATCH v2 57/60] i2c: nvidia-gpu: reword according to newest specification
- From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
- [PATCH v2 56/60] i2c: viai2c: reword according to newest specification
- From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
- [PATCH v2 55/60] i2c: viperboard: reword according to newest specification
- From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
- [PATCH v2 54/60] i2c: uniphier: reword according to newest specification
- From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
- [PATCH v2 52/60] i2c: tiny-usb: reword according to newest specification
- From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
- [PATCH v2 53/60] i2c: uniphier-f: reword according to newest specification
- From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
- [PATCH v2 51/60] i2c: thunderx-pcidrv: reword according to newest specification
- From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
- [PATCH v2 50/60] i2c: tegra-bpmp: reword according to newest specification
- From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
- [PATCH v2 49/60] i2c: taos-evm: reword according to newest specification
- From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
- [PATCH v2 48/60] i2c: sun6i-p2wi: reword according to newest specification
- From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
- [PATCH v2 45/60] i2c: sis5595: reword according to newest specification
- From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
- [PATCH v2 47/60] i2c: stm32f4: reword according to newest specification
- From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
- [PATCH v2 46/60] i2c: sprd: reword according to newest specification
- From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
- [PATCH v2 44/60] i2c: rzv2m: reword according to newest specification
- From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
- [PATCH v2 43/60] i2c: robotfuzz-osif: reword according to newest specification
- From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
- [PATCH v2 42/60] i2c: rk3x: reword according to newest specification
- From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
- [PATCH v2 41/60] i2c: riic: reword according to newest specification
- From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
- [PATCH v2 40/60] i2c: pxa-pci: reword according to newest specification
- From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
- [PATCH v2 39/60] i2c: powermac: reword according to newest specification
- From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
- [PATCH v2 38/60] i2c: piix4: reword according to newest specification
- From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
- [PATCH v2 37/60] i2c: pasemi: reword according to newest specification
- From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
- [PATCH v2 35/60] i2c: opal: reword according to newest specification
- From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
- [PATCH v2 36/60] i2c: owl: reword according to newest specification
- From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
- [PATCH v2 34/60] i2c: octeon: reword according to newest specification
- From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
- [PATCH v2 31/60] i2c: mt7621: reword according to newest specification
- From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
- [PATCH v2 33/60] i2c: ocores: reword according to newest specification
- From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
- [PATCH v2 32/60] i2c: mv64xxx: reword according to newest specification
- From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
- [PATCH v2 30/60] i2c: mpc: reword according to newest specification
- From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
- [PATCH v2 28/60] i2c: ls2x: reword according to newest specification
- From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
- [PATCH v2 29/60] i2c: mlxcpld: reword according to newest specification
- From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
- [PATCH v2 27/60] i2c: lpc2k: reword according to newest specification
- From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
- [PATCH v2 25/60] i2c: kempld: reword according to newest specification
- From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
- [PATCH v2 26/60] i2c: ljca: reword according to newest specification
- From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
- [PATCH v2 24/60] i2c: jz4780: reword according to newest specification
- From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
- [PATCH v2 23/60] i2c: isch: reword according to newest specification
- From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
- [PATCH v2 21/60] i2c: ibm_iic: reword according to newest specification
- From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
- [PATCH v2 20/60] i2c: i801: reword according to newest specification
- From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
- [PATCH v2 22/60] i2c: iop3xx: reword according to newest specification
- From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
- [PATCH v2 19/60] i2c: hix5hd2: reword according to newest specification
- From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
- [PATCH v2 17/60] i2c: highlander: reword according to newest specification
- From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
- [PATCH v2 18/60] i2c: hisi: reword according to newest specification
- From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
- [PATCH v2 16/60] i2c: gpio: reword according to newest specification
- From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
- [PATCH v2 15/60] i2c: fsi: reword according to newest specification
- From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
- [PATCH v2 14/60] i2c: dln2: reword according to newest specification
- From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
- [PATCH v2 13/60] i2c: diolan-u2c: reword according to newest specification
- From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
- [PATCH v2 12/60] i2c: digicolor: reword according to newest specification
- From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
- [PATCH v2 11/60] i2c: davinci: reword according to newest specification
- From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
- [PATCH v2 10/60] i2c: cros-ec-tunnel: reword according to newest specification
- From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
- [PATCH v2 09/60] i2c: cp2615: reword according to newest specification
- From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
- [PATCH v2 08/60] i2c: cht-wc: reword according to newest specification
- From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
- [PATCH v2 07/60] i2c: brcmstb: reword according to newest specification
- From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
- [PATCH v2 06/60] i2c: bcm2835: reword according to newest specification
- From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
- [PATCH v2 05/60] i2c: bcm-kona: reword according to newest specification
- From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
- [PATCH v2 04/60] i2c: au1550: reword according to newest specification
- From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
- [PATCH v2 03/60] i2c: altera: reword according to newest specification
- From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
- [PATCH v2 02/60] i2c: ali15x3: reword according to newest specification
- From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
- [PATCH v2 01/60] i2c: reword i2c_algorithm according to newest specification
- From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
- [PATCH v2 00/60] i2c: reword first drivers according to newest specification
- From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
- [PATCH] i2c: designware: Constify read-only struct regmap_config
- From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
- Re: [PATCH v2 2/2] i2c: keba: Add KEBA I2C controller support
- From: Gerhard Engleder <gerhard@xxxxxxxxxxxxxxxxxxxxx>
- Re: [GIT PULL] i2c-host-fixes for v6.10-rc7
- From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
- [GIT PULL] i2c-host-fixes for v6.10-rc7
- From: Andi Shyti <andi.shyti@xxxxxxxxxx>
- Re: [PATCH v2 04/12] i2c: riic: Use pm_runtime_resume_and_get()
- From: Andi Shyti <andi.shyti@xxxxxxxxxx>
- Re: [PATCH v2 1/4] i2c: smbus: only limit max banks to eight
- From: Andi Shyti <andi.shyti@xxxxxxxxxx>
- Re: [RFC PATCH V2 04/12] dt-bindings: misc: tegra-i2c: config settings
- From: Thierry Reding <thierry.reding@xxxxxxxxx>
- Re: [PATCH 2/2] i2c: mt7621: make device_reset optional
- From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
- Re: [PATCH 1/2] i2c: mt7621: Add Airoha EN7581 i2c support
- From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
- Re: [PATCH 2/2] i2c: mt7621: make device_reset optional
- From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
- Re: [PATCH v2 1/4] i2c: smbus: only limit max banks to eight
- From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
- Re: [PATCH v2 04/12] i2c: riic: Use pm_runtime_resume_and_get()
- From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
- Re: [PATCH v6 6/6] platform/x86: dell-smo8800: Add support for probing for the accelerometer i2c address
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- Re: [PATCH v2 1/4] i2c: smbus: only limit max banks to eight
- From: Thomas Weißschuh <thomas@xxxxxxxx>
- Re: [PATCH v2 0/4] i2c: smbus cleanups and SPD support for piix4
- From: Thomas Weißschuh <thomas@xxxxxxxx>
- Re: [PATCH v2 04/12] i2c: riic: Use pm_runtime_resume_and_get()
- From: Andi Shyti <andi.shyti@xxxxxxxxxx>
- Re: [PATCH v2 03/12] i2c: riic: Call pm_runtime_get_sync() when need to access registers
- From: Andi Shyti <andi.shyti@xxxxxxxxxx>
- Re: [PATCH v2 02/12] i2c: riic: Use temporary variable for struct device
- From: Andi Shyti <andi.shyti@xxxxxxxxxx>
- [PATCH 2/2] i2c: mt7621: make device_reset optional
- From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
- [PATCH 1/2] i2c: mt7621: Add Airoha EN7581 i2c support
- From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
- [PATCH 0/2] Introduce Airoha EN7581 i2c support
- From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
- Re: [PATCH v2 1/4] i2c: smbus: only limit max banks to eight
- From: Andi Shyti <andi.shyti@xxxxxxxxxx>
- Re: [PATCH v2 0/4] i2c: smbus cleanups and SPD support for piix4
- From: Andi Shyti <andi.shyti@xxxxxxxxxx>
- Re: [PATCH v2 4/4] i2c: piix4: Register SPDs
- From: Andi Shyti <andi.shyti@xxxxxxxxxx>
- Re: [PATCH v6 6/6] platform/x86: dell-smo8800: Add support for probing for the accelerometer i2c address
- From: Pali Rohár <pali@xxxxxxxxxx>
- Re: [PATCH v6 2/6] i2c: i801: Use a different adapter-name for IDF adapters
- From: Andi Shyti <andi.shyti@xxxxxxxxxx>
- Re: [PATCH v6 1/6] i2c: core: Setup i2c_adapter runtime-pm before calling device_add()
- From: Andi Shyti <andi.shyti@xxxxxxxxxx>
- Re: [PATCH v4 0/6] i2c-i801 / dell-lis3lv02d: Move instantiation of lis3lv02d i2c_client from i2c-i801 to dell-lis3lv02d
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- Re: [PATCH v4 0/6] i2c-i801 / dell-lis3lv02d: Move instantiation of lis3lv02d i2c_client from i2c-i801 to dell-lis3lv02d
- From: Pali Rohár <pali@xxxxxxxxxx>
- Re: [PATCH 0/6] media: qcom: camss: Add sc7280 support
- From: "Luca Weiss" <luca.weiss@xxxxxxxxxxxxx>
- [GIT PULL] at24: updates for v6.11-rc1
- From: Bartosz Golaszewski <brgl@xxxxxxxx>
- [PATCH v6 6/6] platform/x86: dell-smo8800: Add support for probing for the accelerometer i2c address
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- [PATCH v6 4/6] platform/x86: dell-smo8800: Move instantiation of lis3lv02d i2c_client from i2c-i801 to dell-lis3lv02d
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- [PATCH v6 5/6] platform/x86: dell-smo8800: Add a couple more models to lis3lv02d_devices[]
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- [PATCH v6 3/6] platform/x86: dell-smo8800: Move SMO88xx acpi_device_ids to dell-smo8800-ids.h
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- [PATCH v6 2/6] i2c: i801: Use a different adapter-name for IDF adapters
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- [PATCH v6 0/6] i2c-i801 / dell-lis3lv02d: Move instantiation of lis3lv02d i2c_client from i2c-i801 to dell-lis3lv02d
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- [PATCH v6 1/6] i2c: core: Setup i2c_adapter runtime-pm before calling device_add()
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- Re: [PATCH v5 6/6] platform/x86: dell-smo8800: Add support for probing for the accelerometer i2c address
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- Re: [PATCH v5 6/6] platform/x86: dell-smo8800: Add support for probing for the accelerometer i2c address
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- Re: [PATCH v2 0/2] I2C controller support for KEBA PLCs
- From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v4 0/6] i2c-i801 / dell-lis3lv02d: Move instantiation of lis3lv02d i2c_client from i2c-i801 to dell-lis3lv02d
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- Re: [PATCH v4 0/6] i2c-i801 / dell-lis3lv02d: Move instantiation of lis3lv02d i2c_client from i2c-i801 to dell-lis3lv02d
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- Re: [RFC PATCH] i2c: rcar: bring hardware to known state when probing
- From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v2] i2c: xiic: improve error message when transfer fails to start
- From: Andi Shyti <andi.shyti@xxxxxxxxxx>
- Re: [PATCH v2] i2c: xiic: improve error message when transfer fails to start
- From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
- [PATCH v2] i2c: add debug message for detected HostNotify alerts
- From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
- Re: [Patch v6] i2c: pnx: Fix potential deadlock warning from del_timer_sync() call in isr
- From: Andi Shyti <andi.shyti@xxxxxxxxxx>
- Re: [Patch v6] i2c: pnx: Fix potential deadlock warning from del_timer_sync() call in isr
- From: Andi Shyti <andi.shyti@xxxxxxxxxx>
- Re: [PATCH v2 2/2] i2c: keba: Add KEBA I2C controller support
- From: Andi Shyti <andi.shyti@xxxxxxxxxx>
- Re: [PATCH] HID: mcp2221: Remove unneeded semicolon
- From: Andi Shyti <andi.shyti@xxxxxxxxxx>
- Re: [RFC PATCH] i2c: rcar: bring hardware to known state when probing
- From: Andi Shyti <andi.shyti@xxxxxxxxxx>
- Re: [RFC PATCH V2 04/12] dt-bindings: misc: tegra-i2c: config settings
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v4 0/6] i2c-i801 / dell-lis3lv02d: Move instantiation of lis3lv02d i2c_client from i2c-i801 to dell-lis3lv02d
- From: Pali Rohár <pali@xxxxxxxxxx>
- Re: [PATCH v4 1/2] dt-bindings: hwmon: Add MPS mp5920
- From: Conor Dooley <conor@xxxxxxxxxx>
- [PATCH v5 3/6] platform/x86: dell-smo8800: Move SMO88xx acpi_device_ids to dell-smo8800-ids.h
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- [PATCH v5 2/6] i2c: i801: Use a different adapter-name for IDF adapters
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- [PATCH v5 1/6] i2c: core: Setup i2c_adapter runtime-pm before calling device_add()
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- [PATCH v5 0/6] i2c-i801 / dell-lis3lv02d: Move instantiation of lis3lv02d i2c_client from i2c-i801 to dell-lis3lv02d
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- [PATCH v5 6/6] platform/x86: dell-smo8800: Add support for probing for the accelerometer i2c address
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- [PATCH v5 5/6] platform/x86: dell-smo8800: Add a couple more models to lis3lv02d_devices[]
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- [PATCH v5 4/6] platform/x86: dell-smo8800: Move instantiation of lis3lv02d i2c_client from i2c-i801 to dell-lis3lv02d
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- Re: [PATCH v4 0/6] i2c-i801 / dell-lis3lv02d: Move instantiation of lis3lv02d i2c_client from i2c-i801 to dell-lis3lv02d
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- Re: [PATCH v4 6/6] platform/x86: dell-smo8800: Add support for probing for the accelerometer i2c address
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- Re: [PATCH 0/7] Add support for Kontron OSM-S i.MX93 SoM and carrier board
- From: Bartosz Golaszewski <brgl@xxxxxxxx>
- Re: [PATCH v4 0/3] Read MAC address through NVMEM for sama7g5ek
- From: Bartosz Golaszewski <brgl@xxxxxxxx>
- Re: [PATCH v3 0/3] i2c: mux: gpio: Add 'settle-time-us' property
- From: Bastien Curutchet <bastien.curutchet@xxxxxxxxxxx>
- [PATCH v4 3/3] dt-bindings: eeprom: at24: Add Microchip 24AA025E48/24AA025E64
- From: Andrei Simion <andrei.simion@xxxxxxxxxxxxx>
- [PATCH v4 2/3] ARM: dts: microchip: at91-sama7g5ek: add EEPROMs
- From: Andrei Simion <andrei.simion@xxxxxxxxxxxxx>
- [PATCH v4 1/3] eeprom: at24: Add support for Microchip 24AA025E48/24AA025E64 EEPROMs
- From: Andrei Simion <andrei.simion@xxxxxxxxxxxxx>
- [PATCH v4 0/3] Read MAC address through NVMEM for sama7g5ek
- From: Andrei Simion <andrei.simion@xxxxxxxxxxxxx>
- [RFC PATCH] i2c: rcar: bring hardware to known state when probing
- From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
- Re: Regression caused by "eeprom: at24: Probe for DDR3 thermal sensor in the SPD case" - "sysfs: cannot create duplicate filename"
- From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
- Re: [PATCH v4 2/2] hwmon: add MP5920 driver
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
- Re: [PATCH v4 2/2] hwmon: add MP5920 driver
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
- Re: [PATCH v4 1/2] dt-bindings: hwmon: Add MPS mp5920
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
- Re: [PATCH v4 5/6] platform/x86: dell-smo8800: Add a couple more models to lis3lv02d_devices[]
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- Re: [PATCH v4 2/2] hwmon: add MP5920 driver
- From: Thomas Weißschuh <thomas@xxxxxxxx>
- Re: [PATCH v4 4/6] platform/x86: dell-smo8800: Move instantiation of lis3lv02d i2c_client from i2c-i801 to dell-lis3lv02d
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- Re: [PATCH v3 1/2] dt-bindings: hwmon: Add MPS mp5920
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
- Re: [PATCH v3 1/2] dt-bindings: hwmon: Add MPS mp5920
- From: Conor Dooley <conor@xxxxxxxxxx>
- Re: [PATCH 4/9] mtd: devices: add AT24 eeprom support
- From: Maxime Ripard <mripard@xxxxxxxxxx>
- Re: [PATCH 2/7] dt-bindings: eeprom: at24: Add compatible for ONSemi N24S64B
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH 1/7] dt-bindings: eeprom: at24: Move compatible for Belling BL24C16A to proper place
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH 4/9] mtd: devices: add AT24 eeprom support
- From: Pratyush Yadav <pratyush@xxxxxxxxxx>
- Re: [PATCH 4/9] mtd: devices: add AT24 eeprom support
- From: Maxime Ripard <mripard@xxxxxxxxxx>
- Re: [PATCH 4/9] mtd: devices: add AT24 eeprom support
- From: Pratyush Yadav <pratyush@xxxxxxxxxx>
- Re: [PATCH v3 1/2] dt-bindings: hwmon: Add MPS mp5920
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v4 1/2] dt-bindings: hwmon: Add MPS mp5920
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- [PATCH v4 1/2] dt-bindings: hwmon: Add MPS mp5920
- From: Alex Vdovydchenko <xzeol@xxxxxxxxx>
- [PATCH v4 2/2] hwmon: add MP5920 driver
- From: Alex Vdovydchenko <xzeol@xxxxxxxxx>
- [PATCH v4 0/2] Add MPS MP5920 Host-Swap controller
- From: Alex Vdovydchenko <xzeol@xxxxxxxxx>
- [PATCH 2/7] dt-bindings: eeprom: at24: Add compatible for ONSemi N24S64B
- From: Frieder Schrempf <frieder@xxxxxxx>
- [PATCH 1/7] dt-bindings: eeprom: at24: Move compatible for Belling BL24C16A to proper place
- From: Frieder Schrempf <frieder@xxxxxxx>
- [PATCH 0/7] Add support for Kontron OSM-S i.MX93 SoM and carrier board
- From: Frieder Schrempf <frieder@xxxxxxx>
- Re: [RFC PATCH V2 04/12] dt-bindings: misc: tegra-i2c: config settings
- From: Thierry Reding <thierry.reding@xxxxxxxxx>
- Re: [PATCH 9/9] eeprom: at24: remove deprecated Kconfig symbol
- From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
- Re: [Patch v6] i2c: pnx: Fix potential deadlock warning from del_timer_sync() call in isr
- From: Piotr Wojtaszczyk <piotr.wojtaszczyk@xxxxxxxxxxx>
- Re: [PATCH 9/9] eeprom: at24: remove deprecated Kconfig symbol
- From: Bartosz Golaszewski <brgl@xxxxxxxx>
- Re: [PATCH 2/9] mtd: add mtd_is_master helper
- From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
- Re: [Patch v6] i2c: pnx: Fix potential deadlock warning from del_timer_sync() call in isr
- From: Andi Shyti <andi.shyti@xxxxxxxxxx>
- Re: [PATCH v3 2/2] hwmon: add MP5920 driver
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
- Re: [PATCH v3 2/2] hwmon: add MP5920 driver
- From: Thomas Weißschuh <thomas@xxxxxxxx>
- Re: [Patch v5 08/12] dmaengine: Add dma router for pl08x in LPC32XX SoC
- From: Frank Li <Frank.li@xxxxxxx>
- Re: [PATCH 6/6] media: qcom: camss: support for camss driver for sc7280
- From: Marion & Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
- Re: [PATCH 3/6] arm64: dts: qcom: sc7280: Add IMX577 camera sensor
- From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
- Re: [RFC PATCH V2 04/12] dt-bindings: misc: tegra-i2c: config settings
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [RFC PATCH V2 04/12] dt-bindings: misc: tegra-i2c: config settings
- From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
- Re: [RFC PATCH V2 05/12] dt-bindings: i2c: tegra-i2c: reference to config
- From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
- Re: [RFC PATCH V2 02/12] dt-bindings: misc: Tegra configuration settings
- From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
- Re: [PATCH 4/9] mtd: devices: add AT24 eeprom support
- From: Tudor Ambarus <tudor.ambarus@xxxxxxxxxx>
- Re: [PATCH 2/9] mtd: add mtd_is_master helper
- From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxx>
- Re: [PATCH v3 2/2] hwmon: add MP5920 driver
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
- Re: [PATCH v3 1/2] dt-bindings: hwmon: Add MPS mp5920
- From: Conor Dooley <conor@xxxxxxxxxx>
- Re: [PATCH v4 00/40] fsi: Add interrupt support
- From: Eddie James <eajames@xxxxxxxxxxxxx>
- [RFC PATCH V2 11/12] mmc: host: tegra: config settings for timing
- From: Krishna Yarlagadda <kyarlagadda@xxxxxxxxxx>
- [RFC PATCH V2 12/12] arm64: tegra: SDHCI timing settings
- From: Krishna Yarlagadda <kyarlagadda@xxxxxxxxxx>
- [RFC PATCH V2 10/12] dt-bindings: mmc: tegra-sdhci: reference to config
- From: Krishna Yarlagadda <kyarlagadda@xxxxxxxxxx>
- [RFC PATCH V2 09/12] dt-bindings: misc: tegra-sdhci: config settings
- From: Krishna Yarlagadda <kyarlagadda@xxxxxxxxxx>
- [RFC PATCH V2 08/12] arm64: tegra: I2C interface timings
- From: Krishna Yarlagadda <kyarlagadda@xxxxxxxxxx>
- [RFC PATCH V2 07/12] i2c: tegra: config settings for interface timings
- From: Krishna Yarlagadda <kyarlagadda@xxxxxxxxxx>
- [RFC PATCH V2 06/12] i2c: tegra: split clock initialization code
- From: Krishna Yarlagadda <kyarlagadda@xxxxxxxxxx>
- [RFC PATCH V2 05/12] dt-bindings: i2c: tegra-i2c: reference to config
- From: Krishna Yarlagadda <kyarlagadda@xxxxxxxxxx>
- [RFC PATCH V2 04/12] dt-bindings: misc: tegra-i2c: config settings
- From: Krishna Yarlagadda <kyarlagadda@xxxxxxxxxx>
- [RFC PATCH V2 03/12] soc: tegra: Add config setting framework
- From: Krishna Yarlagadda <kyarlagadda@xxxxxxxxxx>
- [RFC PATCH V2 02/12] dt-bindings: misc: Tegra configuration settings
- From: Krishna Yarlagadda <kyarlagadda@xxxxxxxxxx>
- [RFC PATCH V2 01/12] Documentation: Introduce config settings framework
- From: Krishna Yarlagadda <kyarlagadda@xxxxxxxxxx>
- [RFC PATCH V2 00/12] Introduce Tegra register config settings
- From: Krishna Yarlagadda <kyarlagadda@xxxxxxxxxx>
- Re: [PATCH v3 3/3] dt-bindings: eeprom: at24: Add Microchip 24AA025E48/24AA025E64
- From: <Andrei.Simion@xxxxxxxxxxxxx>
- [PATCH v3 2/2] hwmon: add MP5920 driver
- From: Alex Vdovydchenko <keromvp@xxxxxxxxx>
- [PATCH v3 1/2] dt-bindings: hwmon: Add MPS mp5920
- From: Alex Vdovydchenko <keromvp@xxxxxxxxx>
- [PATCH v3 0/2] Add MPS MP5920 Host-Swap controller
- From: Alex Vdovydchenko <keromvp@xxxxxxxxx>
- Re: [PATCH v3 3/3] dt-bindings: eeprom: at24: Add Microchip 24AA025E48/24AA025E64
- From: Conor Dooley <conor@xxxxxxxxxx>
- Re: [PATCH v3 3/3] dt-bindings: eeprom: at24: Add Microchip 24AA025E48/24AA025E64
- From: <Andrei.Simion@xxxxxxxxxxxxx>
- [PATCH 4/9] mtd: devices: add AT24 eeprom support
- From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
- [PATCH 5/9] ARM: defconfig: convert to MTD_EEPROM_AT24
- From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
- [PATCH 6/9] powerpc: convert to MTD_EEPROM_AT24
- From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
- [PATCH 7/9] MIPS: configs: convert to MTD_EEPROM_AT24
- From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
- [PATCH 1/9] mtd: core: add nvmem_write support
- From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
- [PATCH 0/9] AT24 EEPROM MTD Support
- From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
- [PATCH 3/9] mtd: add support to handle EEPROM devices
- From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
- [PATCH 8/9] LoongArch: convert to MTD_EEPROM_AT24
- From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
- [PATCH 2/9] mtd: add mtd_is_master helper
- From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
- [PATCH 9/9] eeprom: at24: remove deprecated Kconfig symbol
- From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
- Re: [PATCH v3 1/3] eeprom: at24: avoid adjusting offset for 24AA025E{48, 64}
- From: <Andrei.Simion@xxxxxxxxxxxxx>
- Re: [Patch v5 10/12] mtd: rawnand: lpx32xx: Request DMA channels using DT entries
- From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
- Re: [PATCH v3 1/3] eeprom: at24: avoid adjusting offset for 24AA025E{48, 64}
- From: Bartosz Golaszewski <brgl@xxxxxxxx>
- Re: [PATCH v3 1/3] eeprom: at24: avoid adjusting offset for 24AA025E{48, 64}
- From: <Andrei.Simion@xxxxxxxxxxxxx>
- Re: [PATCH 5/6] i2c: Enable IMX577 camera sensor for qcm6490
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH 5/6] i2c: Enable IMX577 camera sensor for qcm6490
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH 4/6] arm64: dts: qcom: qcs6490-rb3gen2: Enable IMX577 camera sensor
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH 3/6] arm64: dts: qcom: sc7280: Add IMX577 camera sensor
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH 1/6] media: dt-bindings: media: camss: Add qcom,sc7280-camss binding
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v3 1/3] eeprom: at24: avoid adjusting offset for 24AA025E{48, 64}
- From: Bartosz Golaszewski <brgl@xxxxxxxx>
- Re: [PATCH v3 1/3] eeprom: at24: avoid adjusting offset for 24AA025E{48, 64}
- From: <Andrei.Simion@xxxxxxxxxxxxx>
- [PATCH] HID: mcp2221: Remove unneeded semicolon
- From: Chen Ni <nichen@xxxxxxxxxxx>
- [PATCH v2 2/2] i2c: keba: Add KEBA I2C controller support
- From: Gerhard Engleder <gerhard@xxxxxxxxxxxxxxxxxxxxx>
- [PATCH v2 1/2] misc: keba: Add basic KEBA CP500 system FPGA support
- From: Gerhard Engleder <gerhard@xxxxxxxxxxxxxxxxxxxxx>
- [PATCH v2 0/2] I2C controller support for KEBA PLCs
- From: Gerhard Engleder <gerhard@xxxxxxxxxxxxxxxxxxxxx>
- Re: Regression caused by "eeprom: at24: Probe for DDR3 thermal sensor in the SPD case" - "sysfs: cannot create duplicate filename"
- From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
- Re: [PULL REQUEST] i2c-for-6.10-rc6
- From: pr-tracker-bot@xxxxxxxxxx
- Re: [PATCH v2 4/4] i2c: piix4: Register SPDs
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
- Re: [PATCH v2 4/4] i2c: piix4: Register SPDs
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
- [PULL REQUEST] i2c-for-6.10-rc6
- From: Wolfram Sang <wsa@xxxxxxxxxx>
- Re: [PATCH 3/6] arm64: dts: qcom: sc7280: Add IMX577 camera sensor
- From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
- Re: [PATCH 2/6] arm64: dts: qcom: sc7280: Add support for camss
- From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
- Re: [PATCH 6/6] media: qcom: camss: support for camss driver for sc7280
- From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
- Re: [PATCH 4/6] arm64: dts: qcom: qcs6490-rb3gen2: Enable IMX577 camera sensor
- From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
- Re: [PATCH v2 09/12] i2c: riic: Add support for fast mode plus
- From: claudiu beznea <claudiu.beznea@xxxxxxxxx>
- Re: [PATCH v2 07/12] i2c: riic: Define individual arrays to describe the register offsets
- From: claudiu beznea <claudiu.beznea@xxxxxxxxx>
- Re: [PATCH 3/6] arm64: dts: qcom: sc7280: Add IMX577 camera sensor
- From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
- Re: [PATCH 1/6] media: dt-bindings: media: camss: Add qcom,sc7280-camss binding
- From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
- Re: [PATCH 5/6] i2c: Enable IMX577 camera sensor for qcm6490
- From: Luca Weiss <luca@xxxxxxxxxxxx>
- Re: [PATCH v2 4/4] i2c: piix4: Register SPDs
- From: Thomas Weißschuh <linux@xxxxxxxxxxxxxx>
- RE: [PATCH v2 09/12] i2c: riic: Add support for fast mode plus
- From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
- RE: [PATCH v2] i2c: aspeed: Update the stop sw state when the bus recovery occurs
- From: Tommy Huang <tommy_huang@xxxxxxxxxxxxxx>
- Re: [PATCH v2 4/4] i2c: piix4: Register SPDs
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
- Re: [PATCH 2/2] i2c: testunit: discard write requests while old command is running
- From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 1/2] i2c: testunit: don't erase registers after STOP
- From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
- Re: i2c-host-fixes for v6.10-rc6
- From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
- [PATCH 6/6] media: qcom: camss: support for camss driver for sc7280
- From: Vikram Sharma <quic_vikramsa@xxxxxxxxxxx>
- [PATCH 5/6] i2c: Enable IMX577 camera sensor for qcm6490
- From: Vikram Sharma <quic_vikramsa@xxxxxxxxxxx>
- [PATCH 4/6] arm64: dts: qcom: qcs6490-rb3gen2: Enable IMX577 camera sensor
- From: Vikram Sharma <quic_vikramsa@xxxxxxxxxxx>
- [PATCH 3/6] arm64: dts: qcom: sc7280: Add IMX577 camera sensor
- From: Vikram Sharma <quic_vikramsa@xxxxxxxxxxx>
- [PATCH 2/6] arm64: dts: qcom: sc7280: Add support for camss
- From: Vikram Sharma <quic_vikramsa@xxxxxxxxxxx>
- [PATCH 1/6] media: dt-bindings: media: camss: Add qcom,sc7280-camss binding
- From: Vikram Sharma <quic_vikramsa@xxxxxxxxxxx>
- [PATCH 0/6] media: qcom: camss: Add sc7280 support
- From: Vikram Sharma <quic_vikramsa@xxxxxxxxxxx>
- Re: (subset) [Patch v5 00/12] Add audio support for LPC32XX CPUs
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH v5 2/2] hwmon: add MP2891 driver
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
- Re: [PATCH v5 1/2] dt-bindings: hwmon: Add MPS mp2891
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
- [Patch v6] i2c: pnx: Fix potential deadlock warning from del_timer_sync() call in isr
- From: Piotr Wojtaszczyk <piotr.wojtaszczyk@xxxxxxxxxxx>
- RE: [PATCH v2 07/12] i2c: riic: Define individual arrays to describe the register offsets
- From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
- Re: [PATCH v4 0/9] Add Mule MFD support
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
- Re: [PATCH v3 1/3] eeprom: at24: avoid adjusting offset for 24AA025E{48, 64}
- From: Bartosz Golaszewski <brgl@xxxxxxxx>
- Re: [PATCH v3 0/3] Read MAC address through NVMEM for sama7g5ek
- From: "Arnd Bergmann" <arnd@xxxxxxxx>
- Re: [PATCH v3 1/3] eeprom: at24: avoid adjusting offset for 24AA025E{48, 64}
- From: <Andrei.Simion@xxxxxxxxxxxxx>
- Re: [PATCH v3 0/3] Read MAC address through NVMEM for sama7g5ek
- From: <Andrei.Simion@xxxxxxxxxxxxx>
- Re: [PATCH v4 1/4] nvmem: Replace spaces with tab in documentation
- From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
- Re: [PATCH v2 07/12] i2c: riic: Define individual arrays to describe the register offsets
- From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
- RE: [PATCH v2 07/12] i2c: riic: Define individual arrays to describe the register offsets
- From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
- Re: [PATCH v2 07/12] i2c: riic: Define individual arrays to describe the register offsets
- From: claudiu beznea <claudiu.beznea@xxxxxxxxx>
- Re: [PATCH v3 0/3] Add I2C support on TH1520
- From: Conor Dooley <conor.dooley@xxxxxxxxxxxxx>
- RE: [PATCH v2 07/12] i2c: riic: Define individual arrays to describe the register offsets
- From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
- Re: [PATCH v2 07/12] i2c: riic: Define individual arrays to describe the register offsets
- From: claudiu beznea <claudiu.beznea@xxxxxxxxx>
- Re: [PATCH v2 07/12] i2c: riic: Define individual arrays to describe the register offsets
- From: claudiu beznea <claudiu.beznea@xxxxxxxxx>
- Re: [PATCH v2 09/12] i2c: riic: Add support for fast mode plus
- From: claudiu beznea <claudiu.beznea@xxxxxxxxx>
- i2c-host-fixes for v6.10-rc6
- From: Andi Shyti <andi.shyti@xxxxxxxxxx>
- Re: [PATCH v3 0/3] Add I2C support on TH1520
- From: Andi Shyti <andi.shyti@xxxxxxxxxx>
- Re: [PATCH v2 09/12] i2c: riic: Add support for fast mode plus
- From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
- RE: [PATCH v2 07/12] i2c: riic: Define individual arrays to describe the register offsets
- From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
- Re: [PATCH v2 07/12] i2c: riic: Define individual arrays to describe the register offsets
- From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
- Re: [PATCH v3 3/3] dt-bindings: eeprom: at24: Add Microchip 24AA025E48/24AA025E64
- From: Conor Dooley <conor.dooley@xxxxxxxxxxxxx>
- Re: [PATCH v2 07/12] i2c: riic: Define individual arrays to describe the register offsets
- From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
- Re: [PATCH v4 0/9] Add Mule MFD support
- From: Farouk Bouabid <farouk.bouabid@xxxxxxxxx>
- Re: [PATCH v3 1/3] eeprom: at24: avoid adjusting offset for 24AA025E{48, 64}
- From: Bartosz Golaszewski <brgl@xxxxxxxx>
- Re: [PATCH v3 0/3] Read MAC address through NVMEM for sama7g5ek
- From: "Arnd Bergmann" <arnd@xxxxxxxx>
- RE: [PATCH v2 07/12] i2c: riic: Define individual arrays to describe the register offsets
- From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
- RE: [PATCH v2 07/12] i2c: riic: Define individual arrays to describe the register offsets
- From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
- Re: [PATCH v2 07/12] i2c: riic: Define individual arrays to describe the register offsets
- From: claudiu beznea <claudiu.beznea@xxxxxxxxx>
- RE: [PATCH v2 07/12] i2c: riic: Define individual arrays to describe the register offsets
- From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
- [no subject]
- Re: [PATCH v2 07/12] i2c: riic: Define individual arrays to describe the register offsets
- From: claudiu beznea <claudiu.beznea@xxxxxxxxx>
- Re: [PATCH v2 07/12] i2c: riic: Define individual arrays to describe the register offsets
- From: claudiu beznea <claudiu.beznea@xxxxxxxxx>
- [PATCH v3 3/3] dt-bindings: eeprom: at24: Add Microchip 24AA025E48/24AA025E64
- From: Andrei Simion <andrei.simion@xxxxxxxxxxxxx>
- [PATCH v3 2/3] ARM: dts: at91: at91-sama7g5ek: add EEPROMs
- From: Andrei Simion <andrei.simion@xxxxxxxxxxxxx>
- [PATCH v3 1/3] eeprom: at24: avoid adjusting offset for 24AA025E{48, 64}
- From: Andrei Simion <andrei.simion@xxxxxxxxxxxxx>
- [PATCH v3 0/3] Read MAC address through NVMEM for sama7g5ek
- From: Andrei Simion <andrei.simion@xxxxxxxxxxxxx>
- RE: [PATCH v2 07/12] i2c: riic: Define individual arrays to describe the register offsets
- From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
- Re: [Patch v5 12/12] i2x: pnx: Fix potential deadlock warning from del_timer_sync() call in isr
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [Patch v5 02/12] dt-bindings: dma: Add lpc32xx DMA mux binding
- From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
- Re: [PATCH v2 07/12] i2c: riic: Define individual arrays to describe the register offsets
- From: claudiu beznea <claudiu.beznea@xxxxxxxxx>
- Re: [PATCH v2 2/2] hwmon: add MP5920 driver
- From: kernel test robot <lkp@xxxxxxxxx>
- RE: [PATCH v2 07/12] i2c: riic: Define individual arrays to describe the register offsets
- From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
- Re: [PATCH v2 2/2] hwmon: add MP5920 driver
- From: kernel test robot <lkp@xxxxxxxxx>
- Re: [PATCH v3 4/4] nvmem: core: Implement force_ro sysfs attribute
- From: Marek Vasut <marex@xxxxxxx>
- Re: [PATCH v4 6/6] platform/x86: dell-smo8800: Add support for probing for the accelerometer i2c address
- From: kernel test robot <lkp@xxxxxxxxx>
- Re: [PATCH v4 0/9] Add Mule MFD support
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
- Re: [PATCH v4 4/6] platform/x86: dell-smo8800: Move instantiation of lis3lv02d i2c_client from i2c-i801 to dell-lis3lv02d
- From: kernel test robot <lkp@xxxxxxxxx>
- [PATCH v4 4/4] nvmem: core: Implement force_ro sysfs attribute
- From: Marek Vasut <marex@xxxxxxx>
- [PATCH v4 3/4] nvmem: Use sysfs_emit() for type attribute
- From: Marek Vasut <marex@xxxxxxx>
- [PATCH v4 2/4] nvmem: Document type attribute
- From: Marek Vasut <marex@xxxxxxx>
- [PATCH v4 1/4] nvmem: Replace spaces with tab in documentation
- From: Marek Vasut <marex@xxxxxxx>
- Re: [PATCH v4 3/9] dt-bindings: mfd: add support for mule
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v2 04/12] i2c: riic: Use pm_runtime_resume_and_get()
- From: Andi Shyti <andi.shyti@xxxxxxxxxx>
- [PATCH v2 0/4] i2c: smbus cleanups and SPD support for piix4
- From: Thomas Weißschuh <linux@xxxxxxxxxxxxxx>
- [PATCH v2 3/4] i2c: smbus: drop warning about muxed segments requirement
- From: Thomas Weißschuh <linux@xxxxxxxxxxxxxx>
- [PATCH v2 2/4] i2c: smbus: probe SPDs on a best-effort basis
- From: Thomas Weißschuh <linux@xxxxxxxxxxxxxx>
- [PATCH v2 4/4] i2c: piix4: Register SPDs
- From: Thomas Weißschuh <linux@xxxxxxxxxxxxxx>
- [PATCH v2 1/4] i2c: smbus: only limit max banks to eight
- From: Thomas Weißschuh <linux@xxxxxxxxxxxxxx>
- Re: [PATCH v3 4/4] nvmem: core: Implement force_ro sysfs attribute
- From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
- Re: [PATCH v3 4/4] nvmem: core: Implement force_ro sysfs attribute
- From: Marek Vasut <marex@xxxxxxx>
- Re: [PATCH v2] i2c: aspeed: Update the stop sw state when the bus recovery occurs
- From: Andi Shyti <andi.shyti@xxxxxxxxxx>
- Re: [PATCH 2/2] i2c: testunit: discard write requests while old command is running
- From: Andi Shyti <andi.shyti@xxxxxxxxxx>
- Re: [PATCH 1/2] i2c: testunit: don't erase registers after STOP
- From: Andi Shyti <andi.shyti@xxxxxxxxxx>
- Re: [PATCH] i2c: add debug message for detected HostNotify alerts
- From: Andi Shyti <andi.shyti@xxxxxxxxxx>
- Re: [PATCH v2 1/2] dt-bindings: hwmon: Add MPS mp5920
- From: Conor Dooley <conor@xxxxxxxxxx>
- [Patch v5 12/12] i2x: pnx: Fix potential deadlock warning from del_timer_sync() call in isr
- From: Piotr Wojtaszczyk <piotr.wojtaszczyk@xxxxxxxxxxx>
- [Patch v5 11/12] ASoC: fsl: Add i2s and pcm drivers for LPC32xx CPUs
- From: Piotr Wojtaszczyk <piotr.wojtaszczyk@xxxxxxxxxxx>
- [Patch v5 10/12] mtd: rawnand: lpx32xx: Request DMA channels using DT entries
- From: Piotr Wojtaszczyk <piotr.wojtaszczyk@xxxxxxxxxxx>
- [Patch v5 09/12] ARM: lpc32xx: Remove pl08x platform data in favor for device tree
- From: Piotr Wojtaszczyk <piotr.wojtaszczyk@xxxxxxxxxxx>
- [Patch v5 08/12] dmaengine: Add dma router for pl08x in LPC32XX SoC
- From: Piotr Wojtaszczyk <piotr.wojtaszczyk@xxxxxxxxxxx>
- [Patch v5 07/12] clk: lpc32xx: initialize regmap using parent syscon
- From: Piotr Wojtaszczyk <piotr.wojtaszczyk@xxxxxxxxxxx>
- [Patch v5 06/12] ARM: dts: lpc32xx: Add missing i2s properties
- From: Piotr Wojtaszczyk <piotr.wojtaszczyk@xxxxxxxxxxx>
- [Patch v5 05/12] ARM: dts: lpc32xx: Add missing dma properties
- From: Piotr Wojtaszczyk <piotr.wojtaszczyk@xxxxxxxxxxx>
- [Patch v5 04/12] ARM: dts: lpc32xx: Use simple-mfd for clock control block
- From: Piotr Wojtaszczyk <piotr.wojtaszczyk@xxxxxxxxxxx>
- [Patch v5 03/12] ASoC: dt-bindings: lpc32xx: Add lpc32xx i2s DT binding
- From: Piotr Wojtaszczyk <piotr.wojtaszczyk@xxxxxxxxxxx>
- [Patch v5 02/12] dt-bindings: dma: Add lpc32xx DMA mux binding
- From: Piotr Wojtaszczyk <piotr.wojtaszczyk@xxxxxxxxxxx>
- [Patch v5 01/12] dt-bindings: dma: pl08x: Add dma-cells description
- From: Piotr Wojtaszczyk <piotr.wojtaszczyk@xxxxxxxxxxx>
- [Patch v5 00/12] Add audio support for LPC32XX CPUs
- From: Piotr Wojtaszczyk <piotr.wojtaszczyk@xxxxxxxxxxx>
- Re: [PATCH v3 4/4] nvmem: core: Implement force_ro sysfs attribute
- From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
- Re: [PATCH v2 0/2] Add MPS MP5920 Host-Swap controller
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
- [PATCH] i2c: add debug message for detected HostNotify alerts
- From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
- Re: Regression caused by "eeprom: at24: Probe for DDR3 thermal sensor in the SPD case" - "sysfs: cannot create duplicate filename"
- From: Krzysztof Olędzki <ole@xxxxxx>
- Re: Regression caused by "eeprom: at24: Probe for DDR3 thermal sensor in the SPD case" - "sysfs: cannot create duplicate filename"
- From: Krzysztof Olędzki <ole@xxxxxx>
- Re: Regression caused by "eeprom: at24: Probe for DDR3 thermal sensor in the SPD case" - "sysfs: cannot create duplicate filename"
- From: Krzysztof Olędzki <ole@xxxxxx>
- [PATCH 0/2] i2c: testunit: regression fixes
- From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
- [PATCH 1/2] i2c: testunit: don't erase registers after STOP
- From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
- [PATCH 2/2] i2c: testunit: discard write requests while old command is running
- From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
- Re: [Patch v4 10/10] i2x: pnx: Use threaded irq to fix warning from del_timer_sync()
- From: Piotr Wojtaszczyk <piotr.wojtaszczyk@xxxxxxxxxxx>
- [PATCH v2 2/2] hwmon: add MP5920 driver
- From: Alex Vdovydchenko <keromvp@xxxxxxxxx>
- [PATCH v2 1/2] dt-bindings: hwmon: Add MPS mp5920
- From: Alex Vdovydchenko <keromvp@xxxxxxxxx>
- [PATCH v2 0/2] Add MPS MP5920 Host-Swap controller
- From: Alex Vdovydchenko <keromvp@xxxxxxxxx>
- Re: [PATCH] i2c: Drop explicit initialization of struct i2c_device_id::driver_data to 0
- From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] i2c: Drop explicit initialization of struct i2c_device_id::driver_data to 0
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxx>
- Re: [PATCH 2/2] hwmon: add MP5920 driver
- From: Thomas Weißschuh <thomas@xxxxxxxx>
- Re: [PATCH 2/2] hwmon: add MP5920 driver
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
- Re: [PATCH v3 4/4] nvmem: core: Implement force_ro sysfs attribute
- From: Marek Vasut <marex@xxxxxxx>
- Re: [PATCH] i2c: viai2c: turn common code into a proper module
- From: Andi Shyti <andi.shyti@xxxxxxxxxx>
- [PATCH 2/2] hwmon: add MP5920 driver
- From: Alex Vdovydchenko <keromvp@xxxxxxxxx>
- Re: [PATCH] i2c: viai2c: turn common code into a proper module
- From: Andi Shyti <andi.shyti@xxxxxxxxxx>
- Re: [PATCH v3 4/4] nvmem: core: Implement force_ro sysfs attribute
- From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
- Re: [PATCH v2 01/12] clk: renesas: r9a08g045: Add clock, reset and power domain support for I2C
- From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
- Re: [PATCH] i2c: viai2c: turn common code into a proper module
- From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] i2c: dev: Check for I2C_FUNC_I2C before calling i2c_transfer
- From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] i2c: Drop explicit initialization of struct i2c_device_id::driver_data to 0
- From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] i2c: Drop explicit initialization of struct i2c_device_id::driver_data to 0
- From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] Documentation: i2c: testunit: use proper reST
- From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
- [PATCH v5 2/2] hwmon: add MP2891 driver
- From: Noah Wang <noahwang.wang@xxxxxxxxxxx>
- [PATCH v5 1/2] dt-bindings: hwmon: Add MPS mp2891
- From: Noah Wang <noahwang.wang@xxxxxxxxxxx>
- [PATCH v5 0/2] hwmon: Add support for MPS mp2891 chip
- From: Noah Wang <noahwang.wang@xxxxxxxxxxx>
- [PATCH i2c-tools] eeprog: use force option when eeprog gets data from a pipe
- From: Thomas Richard <thomas.richard@xxxxxxxxxxx>
- Re: [PATCH v2 1/3] eeprom: at24: avoid adjusting offset for 24AA025E{48, 64}
- From: Bartosz Golaszewski <brgl@xxxxxxxx>
- RE: [PATCH v2 04/12] i2c: riic: Use pm_runtime_resume_and_get()
- From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
- Re: [PATCH v2 04/12] i2c: riic: Use pm_runtime_resume_and_get()
- From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
- Re: [PATCH v2] dt-bindings: drop stale Anson Huang from maintainers
- From: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
- Re: [PATCH v2 04/12] i2c: riic: Use pm_runtime_resume_and_get()
- From: claudiu beznea <claudiu.beznea@xxxxxxxxx>
- Re: [PATCH v3] dt-bindings: i2c: nxp,lpc1788-i2c: convert to dt schema
- From: Kanak Shilledar <kanakshilledar@xxxxxxxxx>
- RE: [PATCH v2 04/12] i2c: riic: Use pm_runtime_resume_and_get()
- From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
- Re: [PATCH v2 04/12] i2c: riic: Use pm_runtime_resume_and_get()
- From: claudiu beznea <claudiu.beznea@xxxxxxxxx>
- [PATCH v3 4/4] nvmem: core: Implement force_ro sysfs attribute
- From: Marek Vasut <marex@xxxxxxx>
- [PATCH v3 2/4] nvmem: Document type attribute
- From: Marek Vasut <marex@xxxxxxx>
- [PATCH v3 1/4] nvmem: Replace spaces with tab in documentation
- From: Marek Vasut <marex@xxxxxxx>
- [PATCH v3 3/4] nvmem: Use sysfs_emit() for type attribute
- From: Marek Vasut <marex@xxxxxxx>
- Re: [PATCH v2 1/4] dt-bindings: i2c: qcom-cci: Document sm8550 compatible
- From: Bjorn Andersson <andersson@xxxxxxxxxx>
- Re: [PATCH v2] dt-bindings: drop stale Anson Huang from maintainers
- From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
- Re: [PATCH v3 3/3] riscv: dts: thead: Enable I2C on the BeagleV-Ahead
- From: Drew Fustini <dfustini@xxxxxxxxxxxxxxx>
- Re: [PATCH v3 2/3] riscv: dts: thead: Add TH1520 I2C nodes
- From: Drew Fustini <dfustini@xxxxxxxxxxxxxxx>
- Re: [PATCH v3 0/3] Add I2C support on TH1520
- From: Drew Fustini <dfustini@xxxxxxxxxxxxxxx>
- Re: [Patch v4 10/10] i2x: pnx: Use threaded irq to fix warning from del_timer_sync()
- From: Andi Shyti <andi.shyti@xxxxxxxxxx>
- Re: [PATCH v3] dt-bindings: i2c: nxp,lpc1788-i2c: convert to dt schema
- From: Andi Shyti <andi.shyti@xxxxxxxxxx>
[Index of Archives]
[Linux USB Devel]
[Video for Linux]
[Scanner]
[Linux SCSI]
[Samba]
[Yosemite News]