Re: [PATCH v5 3/8] dt-bindings: i2c: add support for tsd,mule

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, 08 Jul 2024 18:12:14 +0200, Farouk Bouabid wrote:
> Theobroma Systems Mule is an MCU that emulates a set of I2C devices,
> among which is an amc6821 and other devices that are reachable through
> an I2C-mux. The devices on the mux can be selected by writing the
> appropriate device number to an I2C config register (amc6821: reg 0xff)
> 
> Signed-off-by: Farouk Bouabid <farouk.bouabid@xxxxxxxxx>
> ---
>  .../devicetree/bindings/i2c/tsd,mule.yaml          | 63 ++++++++++++++++++++++
>  1 file changed, 63 insertions(+)
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:
Documentation/devicetree/bindings/i2c/tsd,mule.example.dtb: /example-0/i2c/fan@18/i2c-mux: failed to match any schema with compatible: ['tsd,mule-i2c-mux']

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20240708-dev-mule-i2c-mux-v5-3-71446d3f0b8d@xxxxxxxxx

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.





[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux