[PATCH v2 04/60] i2c: au1550: reword according to newest specification

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Change the wording of this driver wrt. the newest I2C v7 and SMBus 3.2
specifications and replace "master/slave" with more appropriate terms.
Remove a useless comment while here.

Signed-off-by: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
---
 drivers/i2c/busses/i2c-au1550.c | 15 +++++++--------
 1 file changed, 7 insertions(+), 8 deletions(-)

diff --git a/drivers/i2c/busses/i2c-au1550.c b/drivers/i2c/busses/i2c-au1550.c
index 8e43f25c117e..902e420e761e 100644
--- a/drivers/i2c/busses/i2c-au1550.c
+++ b/drivers/i2c/busses/i2c-au1550.c
@@ -81,11 +81,10 @@ static int wait_ack(struct i2c_au1550_data *adap)
 	return 0;
 }
 
-static int wait_master_done(struct i2c_au1550_data *adap)
+static int wait_controller_done(struct i2c_au1550_data *adap)
 {
 	int i;
 
-	/* Wait for Master Done. */
 	for (i = 0; i < 2 * adap->xfer_timeout; i++) {
 		if ((RD(adap, PSC_SMBEVNT) & PSC_SMBEVNT_MD) != 0)
 			return 0;
@@ -120,12 +119,12 @@ do_address(struct i2c_au1550_data *adap, unsigned int addr, int rd, int q)
 	if (q)
 		addr |= PSC_SMBTXRX_STP;
 
-	/* Put byte into fifo, start up master. */
+	/* Put byte into fifo, start up controller */
 	WR(adap, PSC_SMBTXRX, addr);
 	WR(adap, PSC_SMBPCR, PSC_SMBPCR_MS);
 	if (wait_ack(adap))
 		return -EIO;
-	return (q) ? wait_master_done(adap) : 0;
+	return (q) ? wait_controller_done(adap) : 0;
 }
 
 static int wait_for_rx_byte(struct i2c_au1550_data *adap, unsigned char *out)
@@ -175,7 +174,7 @@ static int i2c_read(struct i2c_au1550_data *adap, unsigned char *buf,
 
 	/* The last byte has to indicate transfer done. */
 	WR(adap, PSC_SMBTXRX, PSC_SMBTXRX_STP);
-	if (wait_master_done(adap))
+	if (wait_controller_done(adap))
 		return -EIO;
 
 	buf[i] = (unsigned char)(RD(adap, PSC_SMBTXRX) & 0xff);
@@ -204,7 +203,7 @@ static int i2c_write(struct i2c_au1550_data *adap, unsigned char *buf,
 	data = buf[i];
 	data |= PSC_SMBTXRX_STP;
 	WR(adap, PSC_SMBTXRX, data);
-	if (wait_master_done(adap))
+	if (wait_controller_done(adap))
 		return -EIO;
 	return 0;
 }
@@ -246,8 +245,8 @@ static u32 au1550_func(struct i2c_adapter *adap)
 }
 
 static const struct i2c_algorithm au1550_algo = {
-	.master_xfer	= au1550_xfer,
-	.functionality	= au1550_func,
+	.xfer = au1550_xfer,
+	.functionality = au1550_func,
 };
 
 static void i2c_au1550_setup(struct i2c_au1550_data *priv)
-- 
2.43.0





[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux