Change the wording of this driver wrt. the newest I2C v7 and SMBus 3.2
specifications and replace "master/slave" with more appropriate terms.
Signed-off-by: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
---
drivers/i2c/busses/i2c-st.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/i2c/busses/i2c-st.c b/drivers/i2c/busses/i2c-st.c
index 5e01fe3dbb63..05b19ede65a0 100644
--- a/drivers/i2c/busses/i2c-st.c
+++ b/drivers/i2c/busses/i2c-st.c
@@ -2,7 +2,7 @@
/*
* Copyright (C) 2013 STMicroelectronics
*
- * I2C master mode controller driver, used in STMicroelectronics devices.
+ * I2C controller driver, used in STMicroelectronics devices.
*
* Author: Maxime Coquelin <maxime.coquelin@xxxxxx>
*/
@@ -150,7 +150,7 @@ struct st_i2c_timings {
/**
* struct st_i2c_client - client specific data
- * @addr: 8-bit slave addr, including r/w bit
+ * @addr: 8-bit target addr, including r/w bit
* @count: number of bytes to be transfered
* @xfered: number of bytes already transferred
* @buf: data buffer
@@ -667,7 +667,7 @@ static int st_i2c_xfer_msg(struct st_i2c_dev *i2c_dev, struct i2c_msg *msg,
i2c |= SSC_I2C_ACKG;
st_i2c_set_bits(i2c_dev->base + SSC_I2C, i2c);
- /* Write slave address */
+ /* Write target address */
st_i2c_write_tx_fifo(i2c_dev, c->addr);
/* Pre-fill Tx fifo with data in case of write */
@@ -766,7 +766,7 @@ static u32 st_i2c_func(struct i2c_adapter *adap)
}
static const struct i2c_algorithm st_i2c_algo = {
- .master_xfer = st_i2c_xfer,
+ .xfer = st_i2c_xfer,
.functionality = st_i2c_func,
};
--
2.43.0
