Re: [PATCH 4/5] watchdog: Congatec Board Controller watchdog timer driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Aug 09, 2024 at 04:52:08PM +0200, Thomas Richard wrote:
> Add watchdog timer support for the Congatec Board Controller.
> 
> Signed-off-by: Thomas Richard <thomas.richard@xxxxxxxxxxx>
> ---
>  drivers/watchdog/Kconfig    |  10 ++
>  drivers/watchdog/Makefile   |   1 +
>  drivers/watchdog/cgbc_wdt.c | 217 ++++++++++++++++++++++++++++++++++++++++++++
>  3 files changed, 228 insertions(+)
> 
> diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
> index bae1d97cce89..07b711fc8bb2 100644
> --- a/drivers/watchdog/Kconfig
> +++ b/drivers/watchdog/Kconfig
> @@ -1142,6 +1142,16 @@ config ALIM7101_WDT
>  
>  	  Most people will say N.
>  
> +config CGBC_WDT
> +	tristate "Congatec Board Controller Watchdog Timer"
> +	depends on MFD_CGBC
> +	select WATCHDOG_CORE
> +	help
> +	  Enables watchdog timer support for the Congatec Board Controller.
> +
> +	  This driver can also be built as a module. If so, the module will be
> +	  called cgbc_wdt.
> +
>  config EBC_C384_WDT
>  	tristate "WinSystems EBC-C384 Watchdog Timer"
>  	depends on (X86 || COMPILE_TEST) && HAS_IOPORT
> diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
> index b51030f035a6..5aa66ba91346 100644
> --- a/drivers/watchdog/Makefile
> +++ b/drivers/watchdog/Makefile
> @@ -106,6 +106,7 @@ obj-$(CONFIG_ADVANTECH_WDT) += advantechwdt.o
>  obj-$(CONFIG_ADVANTECH_EC_WDT) += advantech_ec_wdt.o
>  obj-$(CONFIG_ALIM1535_WDT) += alim1535_wdt.o
>  obj-$(CONFIG_ALIM7101_WDT) += alim7101_wdt.o
> +obj-$(CONFIG_CGBC_WDT) += cgbc_wdt.o
>  obj-$(CONFIG_EBC_C384_WDT) += ebc-c384_wdt.o
>  obj-$(CONFIG_EXAR_WDT) += exar_wdt.o
>  obj-$(CONFIG_F71808E_WDT) += f71808e_wdt.o
> diff --git a/drivers/watchdog/cgbc_wdt.c b/drivers/watchdog/cgbc_wdt.c
> new file mode 100644
> index 000000000000..9327e87b52e8
> --- /dev/null
> +++ b/drivers/watchdog/cgbc_wdt.c
> @@ -0,0 +1,217 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later
> +/*
> + * Congatec Board Controller watchdog driver
> + *
> + * Copyright (C) 2024 Bootlin
> + * Author: Thomas Richard <thomas.richard@xxxxxxxxxxx>
> + */
> +
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +#include <linux/watchdog.h>
> +
> +#include <linux/mfd/cgbc.h>
> +
> +#define CGBC_WDT_CMD_TRIGGER	0x27
> +#define CGBC_WDT_CMD_INIT	0x28
> +#define CGBC_WDT_DISABLE	0x00
> +
> +#define CGBC_WDT_MODE_SINGLE_EVENT 0x02
> +
> +#define DEFAULT_TIMEOUT_SEC	30
> +#define DEFAULT_PRETIMEOUT_SEC	0
> +
> +enum action {
> +	ACTION_INT = 0,
> +	ACTION_SMI,
> +	ACTION_RESET,
> +	ACTION_BUTTON,
> +};
> +
> +static unsigned int timeout = DEFAULT_TIMEOUT_SEC;
> +module_param(timeout, uint, 0);
> +MODULE_PARM_DESC(timeout,
> +		 "Watchdog timeout in seconds. (>=0, default="
> +		 __MODULE_STRING(DEFAULT_TIMEOUT_SEC) ")");
> +
> +static unsigned int pretimeout = DEFAULT_PRETIMEOUT_SEC;
> +module_param(pretimeout, uint, 0);
> +MODULE_PARM_DESC(pretimeout,
> +		 "Watchdog pretimeout in seconds. (>=0, default="
> +		 __MODULE_STRING(DEFAULT_PRETIMEOUT_SEC) ")");
> +
> +static bool nowayout = WATCHDOG_NOWAYOUT;
> +module_param(nowayout, bool, 0);
> +MODULE_PARM_DESC(nowayout,
> +		 "Watchdog cannot be stopped once started (default="
> +		 __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
> +
> +struct cgbc_wdt_data {
> +	struct cgbc_device_data	*cgbc;
> +	struct watchdog_device	wdd;
> +	enum action timeout_action;
> +	enum action pretimeout_action;
> +};
> +
> +struct cgbc_wdt_cmd_cfg {
> +	u8 cmd;
> +	u8 mode;
> +	u8 action;
> +	u8 timeout1[3];
> +	u8 timeout2[3];
> +	u8 reserved[3];
> +	u8 delay[3];
> +} __packed;
> +
> +static_assert(sizeof(struct cgbc_wdt_cmd_cfg) == 15);

static_assert() is declared in linux/build_bug.h. Please include all
necessary include files explicitly and do not depend on indirect includes.

> +
> +static int cgbc_wdt_start(struct watchdog_device *wdd)
> +{
> +	struct cgbc_wdt_data *wdt_data = watchdog_get_drvdata(wdd);

Unusual way to get wdt_data instead of using container_of().
Any special reason ?

> +	struct cgbc_device_data *cgbc = wdt_data->cgbc;
> +	unsigned int timeout1 = (wdd->timeout - wdd->pretimeout) * 1000;
> +	unsigned int timeout2 = wdd->pretimeout * 1000;
> +	u8 action;
> +
> +	struct cgbc_wdt_cmd_cfg cmd_start = {
> +		.cmd = CGBC_WDT_CMD_INIT,
> +		.mode = CGBC_WDT_MODE_SINGLE_EVENT,
> +		.timeout1[0] = (u8)timeout1,
> +		.timeout1[1] = (u8)(timeout1 >> 8),
> +		.timeout1[2] = (u8)(timeout1 >> 16),
> +		.timeout2[0] = (u8)timeout2,
> +		.timeout2[1] = (u8)(timeout2 >> 8),
> +		.timeout2[2] = (u8)(timeout2 >> 16),
> +	};
> +
> +	if (wdd->pretimeout) {
> +		action = 2;
> +		action |= wdt_data->pretimeout_action << 2;
> +		action |= wdt_data->timeout_action << 4;
> +	} else {
> +		action = 1;
> +		action |= wdt_data->timeout_action << 2;
> +	}
> +
> +	cmd_start.action = action;
> +
> +	return cgbc_command(cgbc, &cmd_start, sizeof(cmd_start), NULL, 0, NULL);
> +}
> +
> +static int cgbc_wdt_stop(struct watchdog_device *wdd)
> +{
> +	struct cgbc_wdt_data *wdt_data = watchdog_get_drvdata(wdd);
> +	struct cgbc_device_data *cgbc = wdt_data->cgbc;
> +	struct cgbc_wdt_cmd_cfg cmd_stop = {
> +		.cmd = CGBC_WDT_CMD_INIT,
> +		.mode = CGBC_WDT_DISABLE,
> +	};
> +
> +	return cgbc_command(cgbc, &cmd_stop, sizeof(cmd_stop), NULL, 0, NULL);
> +}
> +
> +static int cgbc_wdt_keepalive(struct watchdog_device *wdd)
> +{
> +	struct cgbc_wdt_data *wdt_data = watchdog_get_drvdata(wdd);
> +	struct cgbc_device_data *cgbc = wdt_data->cgbc;
> +	u8 cmd_ping = CGBC_WDT_CMD_TRIGGER;
> +
> +	return cgbc_command(cgbc, &cmd_ping, sizeof(cmd_ping), NULL, 0, NULL);
> +}
> +
> +static int cgbc_wdt_set_pretimeout(struct watchdog_device *wdd,
> +				   unsigned int pretimeout)
> +{
> +	struct cgbc_wdt_data *wdt_data = watchdog_get_drvdata(wdd);
> +
> +	wdd->pretimeout = pretimeout;
> +	wdt_data->pretimeout_action = ACTION_SMI;
> +
> +	if (watchdog_active(wdd))
> +		return cgbc_wdt_start(wdd);
> +
> +	return 0;
> +}
> +
> +static int cgbc_wdt_set_timeout(struct watchdog_device *wdd,
> +				unsigned int timeout)
> +{
> +	struct cgbc_wdt_data *wdt_data = watchdog_get_drvdata(wdd);
> +
> +	if (timeout < wdd->pretimeout) {
> +		dev_warn(wdd->parent, "timeout <= pretimeout. Setting pretimeout to zero\n");

That is a normal condition which does not warrant a log message.
Also see drivers/watchdog/watchdog_dev.c around line 385.

> +		wdd->pretimeout = 0;
> +	}
> +
> +	wdd->timeout = timeout;
> +	wdt_data->timeout_action = ACTION_RESET;

Both timeout_action and pretimeout_action are set statically.
What is the point of doing that instead of just using
ACTION_RESET and ACTION_SMI as needed irectly ?

> +
> +	if (watchdog_active(wdd))
> +		return cgbc_wdt_start(wdd);
> +
> +	return 0;
> +}
> +
> +static const struct watchdog_info cgbc_wdt_info = {
> +	.identity	= "CGBC Watchdog",
> +	.options	= WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING |
> +		WDIOF_MAGICCLOSE | WDIOF_PRETIMEOUT
> +};
> +
> +static const struct watchdog_ops cgbc_wdt_ops = {
> +	.owner		= THIS_MODULE,
> +	.start		= cgbc_wdt_start,
> +	.stop		= cgbc_wdt_stop,
> +	.ping		= cgbc_wdt_keepalive,
> +	.set_timeout	= cgbc_wdt_set_timeout,
> +	.set_pretimeout = cgbc_wdt_set_pretimeout,
> +};
> +
> +static int cgbc_wdt_probe(struct platform_device *pdev)
> +{
> +	struct cgbc_device_data *cgbc = dev_get_drvdata(pdev->dev.parent);
> +	struct device *dev = &pdev->dev;
> +	struct cgbc_wdt_data *wdt_data;
> +	struct watchdog_device *wdd;
> +	int ret;
> +
> +	wdt_data = devm_kzalloc(dev, sizeof(*wdt_data), GFP_KERNEL);

devm_kzalloc() is declared in linux/device.h. Again, please include all
necessary include files explicitly.

> +	if (!wdt_data)
> +		return -ENOMEM;
> +
> +	wdt_data->cgbc = cgbc;
> +	wdd = &wdt_data->wdd;
> +	wdd->parent = dev;
> +

No limits ? That is unusual. Are you sure the driver accepts all
timeouts from 0 to UINT_MAX ?

> +	wdd->info = &cgbc_wdt_info;
> +	wdd->ops = &cgbc_wdt_ops;
> +
> +	watchdog_set_drvdata(wdd, wdt_data);
> +	watchdog_set_nowayout(wdd, nowayout);
> +
> +	cgbc_wdt_set_timeout(wdd, timeout);
> +	cgbc_wdt_set_pretimeout(wdd, pretimeout);

The more common approach would be to set default limits in wdd->{timout,pretimeout}
and only override the values if needed, ie if provided using module parameters.
That implies initializing the module parameters with 0. YOur call, though.

> +
> +	platform_set_drvdata(pdev, wdt_data);
> +	watchdog_stop_on_reboot(wdd);
> +	watchdog_stop_on_unregister(wdd);
> +
> +	ret = devm_watchdog_register_device(dev, wdd);
> +	if (ret)
> +		return ret;
> +
> +	return 0;

Why not just
	return devm_watchdog_register_device(dev, wdd);
?

> +}
> +
> +static struct platform_driver cgbc_wdt_driver = {
> +	.driver		= {
> +		.name	= "cgbc-wdt",
> +	},
> +	.probe		= cgbc_wdt_probe,
> +};
> +
> +module_platform_driver(cgbc_wdt_driver);
> +
> +MODULE_DESCRIPTION("Congatec Board Controller Watchdog Driver");
> +MODULE_AUTHOR("Thomas Richard <thomas.richard@xxxxxxxxxxx>");
> +MODULE_LICENSE("GPL");
> 
> -- 
> 2.39.2
> 
> 




[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux