Change the wording of this driver wrt. the newest I2C v7 and SMBus 3.2 specifications and replace "master/slave" with more appropriate terms. Signed-off-by: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx> Reviewed-by: Florian Fainelli <florian.fainelli@xxxxxxxxxxxx> --- drivers/i2c/busses/i2c-bcm2835.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/i2c/busses/i2c-bcm2835.c b/drivers/i2c/busses/i2c-bcm2835.c index 3045ba82380d..ae42e37052a8 100644 --- a/drivers/i2c/busses/i2c-bcm2835.c +++ b/drivers/i2c/busses/i2c-bcm2835.c @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * BCM2835 master mode driver + * BCM2835 I2C controller driver */ #include <linux/clk.h> @@ -25,7 +25,7 @@ #define BCM2835_I2C_DEL 0x18 /* * 16-bit field for the number of SCL cycles to wait after rising SCL - * before deciding the slave is not responding. 0 disables the + * before deciding the target is not responding. 0 disables the * timeout detection. */ #define BCM2835_I2C_CLKT 0x1c @@ -223,7 +223,7 @@ static void bcm2835_drain_rxfifo(struct bcm2835_i2c_dev *i2c_dev) /* * Repeated Start Condition (Sr) * The BCM2835 ARM Peripherals datasheet mentions a way to trigger a Sr when it - * talks about reading from a slave with 10 bit address. This is achieved by + * talks about reading from a target with 10 bit address. This is achieved by * issuing a write, poll the I2CS.TA flag and wait for it to be set, and then * issue a read. * A comment in https://github.com/raspberrypi/linux/issues/254 shows how the @@ -390,8 +390,8 @@ static u32 bcm2835_i2c_func(struct i2c_adapter *adap) } static const struct i2c_algorithm bcm2835_i2c_algo = { - .master_xfer = bcm2835_i2c_xfer, - .functionality = bcm2835_i2c_func, + .xfer = bcm2835_i2c_xfer, + .functionality = bcm2835_i2c_func, }; /* -- 2.43.0
