Change the wording of this driver wrt. the newest I2C v7 and SMBus 3.2
specifications and replace "master/slave" with more appropriate terms.
Signed-off-by: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
---
drivers/i2c/busses/i2c-riic.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/i2c/busses/i2c-riic.c b/drivers/i2c/busses/i2c-riic.c
index f608b1838cad..d6f585cdb7e5 100644
--- a/drivers/i2c/busses/i2c-riic.c
+++ b/drivers/i2c/busses/i2c-riic.c
@@ -12,9 +12,9 @@
*
* 1) The main xfer routine kicks off a transmission by putting the start bit
* (or repeated start) on the bus and enabling the transmit interrupt (TIE)
- * since we need to send the slave address + RW bit in every case.
+ * since we need to send the target address + RW bit in every case.
*
- * 2) TIE sends slave address + RW bit and selects how to continue.
+ * 2) TIE sends target address + RW bit and selects how to continue.
*
* 3a) Write case: We keep utilizing TIE as long as we have data to send. If we
* are done, we switch over to the transmission done interrupt (TEIE) and mark
@@ -294,8 +294,8 @@ static u32 riic_func(struct i2c_adapter *adap)
}
static const struct i2c_algorithm riic_algo = {
- .master_xfer = riic_xfer,
- .functionality = riic_func,
+ .xfer = riic_xfer,
+ .functionality = riic_func,
};
static int riic_init_hw(struct riic_dev *riic, struct i2c_timings *t)
--
2.43.0
