Hi Thomas, On Sat, Jun 29, 2024 at 09:19:48AM GMT, Thomas Weißschuh wrote: > On 2024-06-28 16:09:09+0000, Guenter Roeck wrote: > > On 6/27/24 10:48, Thomas Weißschuh wrote: > > > The piix4 I2C bus can carry SPDs, register them if present. > > > Only look on bus 0, as this is where the SPDs seem to be located. > > > > > > Only the first 8 slots are supported. If the system has more, > > > then these will not be visible. > > > > > > The AUX bus can not be probed as on some platforms it reports all > > > devices present and all reads return "0". > > > This would allow the ee1004 to be probed incorrectly. > > > > Was this reported somewhere ? I don't see it happen on any of my systems > > (of course that doesn't really mean anything). > > It happened on one of the big server systems I tested on. > > > > Signed-off-by: Thomas Weißschuh <linux@xxxxxxxxxxxxxx> > > > > Reviewed-and-tested-by: Guenter Roeck <linux@xxxxxxxxxxxx> > > Thanks! > > FYI, combined tags are discouraged by > Documentation/process/maintainer-tip.rst: > > Please do not use combined tags, e.g. ``Reported-and-tested-by``, as > they just complicate automated extraction of tags. > > I'll add the tags in split form to the patch. No worries, I'll take care of it. Thanks, Andi
