Change the wording of this driver wrt. the newest I2C v7 and SMBus 3.2 specifications and replace "master/slave" with more appropriate terms. Signed-off-by: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx> Reviewed-by: Andi Shyti <andi.shyti@xxxxxxxxxx> --- drivers/i2c/busses/i2c-gpio.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/i2c/busses/i2c-gpio.c b/drivers/i2c/busses/i2c-gpio.c index 4f1411b1a775..e0bd218e2f14 100644 --- a/drivers/i2c/busses/i2c-gpio.c +++ b/drivers/i2c/busses/i2c-gpio.c @@ -216,8 +216,8 @@ static int fops_lose_arbitration_set(void *data, u64 duration) priv->scl_irq_data = duration; /* - * Interrupt on falling SCL. This ensures that the master under test has - * really started the transfer. Interrupt on falling SDA did only + * Interrupt on falling SCL. This ensures that the controller under test + * has really started the transfer. Interrupt on falling SDA did only * exercise 'bus busy' detection on some HW but not 'arbitration lost'. * Note that the interrupt latency may cause the first bits to be * transmitted correctly. @@ -245,8 +245,8 @@ static int fops_inject_panic_set(void *data, u64 duration) priv->scl_irq_data = duration; /* - * Interrupt on falling SCL. This ensures that the master under test has - * really started the transfer. + * Interrupt on falling SCL. This ensures that the controller under test + * has really started the transfer. */ return i2c_gpio_fi_act_on_scl_irq(priv, inject_panic_irq); } -- 2.43.0
