[PATCH 2/3] i2c: testunit: add command to support versioning and test rep_start

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



For some devices, it is essential that controllers handle repeated start
correctly and do not replace it with a stop/start combination. This
addition helps to test that because it will only return a version string
if repeated start is done properly.

Signed-off-by: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
---
 Documentation/i2c/slave-testunit-backend.rst | 38 ++++++++++++++++++++
 drivers/i2c/i2c-slave-testunit.c             | 25 +++++++++++--
 2 files changed, 61 insertions(+), 2 deletions(-)

diff --git a/Documentation/i2c/slave-testunit-backend.rst b/Documentation/i2c/slave-testunit-backend.rst
index 37142a48ab35..a0335782d109 100644
--- a/Documentation/i2c/slave-testunit-backend.rst
+++ b/Documentation/i2c/slave-testunit-backend.rst
@@ -133,3 +133,41 @@ later)::
 
   # i2ctransfer -y 0 w3@0x30 0x03 0x01 0x10 r?
   0x10 0x0f 0x0e 0x0d 0x0c 0x0b 0x0a 0x09 0x08 0x07 0x06 0x05 0x04 0x03 0x02 0x01 0x00
+
+0x04 GET_VERSION_WITH_REP_START
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+.. list-table::
+  :header-rows: 1
+
+  * - CMD
+    - DATAL
+    - DATAH
+    - DELAY
+
+  * - 0x04
+    - currently unused
+    - currently unused
+    - leave out, partial command!
+
+Partial command. After sending this command, the testunit will reply to a read
+message with a NUL terminated version string based on UTS_RELEASE. The first
+character is always a 'v' and the length of the version string is at maximum
+128 bytes. However, it will only respond if the read message is connected to
+the write message via repeated start. If your controller driver handles
+repeated start correctly, this will work::
+
+  # i2ctransfer -y 0 w3@0x30 4 0 0 r128
+  0x76 0x36 0x2e 0x31 0x31 0x2e 0x30 0x2d 0x72 0x63 0x31 0x2d 0x30 0x30 0x30 0x30 ...
+
+If you want to decode to ASCII right away::
+
+  # echo -e "$(i2ctransfer -y 0 w3@0x30 4 0 0 r128 | sed 's/0x\(..\) \?/\\x\1/g')"
+  v6.11.0-rc1-00009-gd37a1b4d3fd0
+
+STOP/START combinations between the two messages will *not* work because they
+are not equivalent to a REPEATED START. As an example, this returns just the
+default response::
+
+  # i2cset -y 0 0x30 4 0 0 i; i2cget -y 0 0x30
+  0x01
diff --git a/drivers/i2c/i2c-slave-testunit.c b/drivers/i2c/i2c-slave-testunit.c
index be1d2e900aef..19296ff09930 100644
--- a/drivers/i2c/i2c-slave-testunit.c
+++ b/drivers/i2c/i2c-slave-testunit.c
@@ -6,6 +6,7 @@
  * Copyright (C) 2020 by Renesas Electronics Corporation
  */
 
+#include <generated/utsrelease.h>
 #include <linux/bitops.h>
 #include <linux/i2c.h>
 #include <linux/init.h>
@@ -15,11 +16,13 @@
 #include <linux/workqueue.h> /* FIXME: is system_long_wq the best choice? */
 
 #define TU_CUR_VERSION 0x01
+#define TU_VERSION_MAX_LENGTH 128
 
 enum testunit_cmds {
 	TU_CMD_READ_BYTES = 1,	/* save 0 for ABORT, RESET or similar */
 	TU_CMD_SMBUS_HOST_NOTIFY,
 	TU_CMD_SMBUS_BLOCK_PROC_CALL,
+	TU_CMD_GET_VERSION_WITH_REP_START,
 	TU_NUM_CMDS
 };
 
@@ -39,10 +42,13 @@ struct testunit_data {
 	unsigned long flags;
 	u8 regs[TU_NUM_REGS];
 	u8 reg_idx;
+	u8 read_idx;
 	struct i2c_client *client;
 	struct delayed_work worker;
 };
 
+static char tu_version_info[] = "v" UTS_RELEASE "\0";
+
 static void i2c_slave_testunit_work(struct work_struct *work)
 {
 	struct testunit_data *tu = container_of(work, struct testunit_data, worker.work);
@@ -91,6 +97,8 @@ static int i2c_slave_testunit_slave_cb(struct i2c_client *client,
 	struct testunit_data *tu = i2c_get_clientdata(client);
 	bool is_proc_call = tu->reg_idx == 3 && tu->regs[TU_REG_DATAL] == 1 &&
 			    tu->regs[TU_REG_CMD] == TU_CMD_SMBUS_BLOCK_PROC_CALL;
+	bool is_get_version = tu->reg_idx == 3 &&
+			      tu->regs[TU_REG_CMD] == TU_CMD_GET_VERSION_WITH_REP_START;
 	int ret = 0;
 
 	switch (event) {
@@ -100,6 +108,7 @@ static int i2c_slave_testunit_slave_cb(struct i2c_client *client,
 
 		memset(tu->regs, 0, TU_NUM_REGS);
 		tu->reg_idx = 0;
+		tu->read_idx = 0;
 		break;
 
 	case I2C_SLAVE_WRITE_RECEIVED:
@@ -136,12 +145,21 @@ static int i2c_slave_testunit_slave_cb(struct i2c_client *client,
 		break;
 
 	case I2C_SLAVE_READ_PROCESSED:
-		if (is_proc_call && tu->regs[TU_REG_DATAH])
+		/* Advance until we reach the NUL character */
+		if (is_get_version && tu_version_info[tu->read_idx] != 0)
+			tu->read_idx++;
+		else if (is_proc_call && tu->regs[TU_REG_DATAH])
 			tu->regs[TU_REG_DATAH]--;
+
 		fallthrough;
 
 	case I2C_SLAVE_READ_REQUESTED:
-		*val = is_proc_call ? tu->regs[TU_REG_DATAH] : TU_CUR_VERSION;
+		if (is_get_version)
+			*val = tu_version_info[tu->read_idx];
+		else if (is_proc_call)
+			*val = tu->regs[TU_REG_DATAH];
+		else
+			*val = TU_CUR_VERSION;
 		break;
 	}
 
@@ -160,6 +178,9 @@ static int i2c_slave_testunit_probe(struct i2c_client *client)
 	i2c_set_clientdata(client, tu);
 	INIT_DELAYED_WORK(&tu->worker, i2c_slave_testunit_work);
 
+	if (sizeof(tu_version_info) > TU_VERSION_MAX_LENGTH)
+		tu_version_info[TU_VERSION_MAX_LENGTH - 1] = 0;
+
 	return i2c_slave_register(client, i2c_slave_testunit_slave_cb);
 };
 
-- 
2.43.0





[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux