Change the wording of this driver wrt. the newest I2C v7 and SMBus 3.2
specifications and replace "master/slave" with more appropriate terms.
Signed-off-by: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
---
drivers/i2c/busses/i2c-owl.c | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/drivers/i2c/busses/i2c-owl.c b/drivers/i2c/busses/i2c-owl.c
index 777f1a0278c7..84a195e35886 100644
--- a/drivers/i2c/busses/i2c-owl.c
+++ b/drivers/i2c/busses/i2c-owl.c
@@ -172,7 +172,7 @@ static void owl_i2c_xfer_data(struct owl_i2c_dev *i2c_dev)
i2c_dev->err = 0;
- /* Handle NACK from slave */
+ /* Handle NACK from target */
fifostat = readl(i2c_dev->base + OWL_I2C_REG_FIFOSTAT);
if (fifostat & OWL_I2C_FIFOSTAT_RNB) {
i2c_dev->err = -ENXIO;
@@ -302,7 +302,7 @@ static int owl_i2c_xfer_common(struct i2c_adapter *adap, struct i2c_msg *msgs,
OWL_I2C_CTL_IRQE, !atomic);
/*
- * Select: FIFO enable, Master mode, Stop enable, Data count enable,
+ * Select: FIFO enable, controller mode, Stop enable, Data count enable,
* Send start bit
*/
i2c_cmd = OWL_I2C_CMD_SECL | OWL_I2C_CMD_MSS | OWL_I2C_CMD_SE |
@@ -314,7 +314,7 @@ static int owl_i2c_xfer_common(struct i2c_adapter *adap, struct i2c_msg *msgs,
i2c_cmd |= OWL_I2C_CMD_AS(msgs[0].len + 1) |
OWL_I2C_CMD_SAS(1) | OWL_I2C_CMD_RBE;
- /* Write slave address */
+ /* Write target address */
addr = i2c_8bit_addr_from_msg(&msgs[0]);
writel(addr, i2c_dev->base + OWL_I2C_REG_TXDAT);
@@ -420,9 +420,9 @@ static int owl_i2c_xfer_atomic(struct i2c_adapter *adap,
}
static const struct i2c_algorithm owl_i2c_algorithm = {
- .master_xfer = owl_i2c_xfer,
- .master_xfer_atomic = owl_i2c_xfer_atomic,
- .functionality = owl_i2c_func,
+ .xfer = owl_i2c_xfer,
+ .xfer_atomic = owl_i2c_xfer_atomic,
+ .functionality = owl_i2c_func,
};
static const struct i2c_adapter_quirks owl_i2c_quirks = {
--
2.43.0
