Change the wording of this driver wrt. the newest I2C v7 and SMBus 3.2
specifications and replace "master/slave" with more appropriate terms.
Signed-off-by: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
Acked-by: Vadim Pasternak <vadimp@xxxxxxxxxx>
---
drivers/i2c/busses/i2c-mlxcpld.c | 14 +++++++-------
1 file changed, 7 insertions(+), 7 deletions(-)
diff --git a/drivers/i2c/busses/i2c-mlxcpld.c b/drivers/i2c/busses/i2c-mlxcpld.c
index 099291a0411d..8223f6d29eb3 100644
--- a/drivers/i2c/busses/i2c-mlxcpld.c
+++ b/drivers/i2c/busses/i2c-mlxcpld.c
@@ -197,8 +197,8 @@ static int mlxcpld_i2c_check_status(struct mlxcpld_i2c_priv *priv, int *status)
if (val & MLXCPLD_LPCI2C_TRANS_END) {
if (val & MLXCPLD_LPCI2C_STATUS_NACK)
/*
- * The slave is unable to accept the data. No such
- * slave, command not understood, or unable to accept
+ * The target is unable to accept the data. No such
+ * target, command not understood, or unable to accept
* any more data.
*/
*status = MLXCPLD_LPCI2C_NACK_IND;
@@ -280,7 +280,7 @@ static int mlxcpld_i2c_wait_for_free(struct mlxcpld_i2c_priv *priv)
}
/*
- * Wait for master transfer to complete.
+ * Wait for transfer to complete.
* It puts current process to sleep until we get interrupt or timeout expires.
* Returns the number of transferred or read bytes or error (<0).
*/
@@ -315,7 +315,7 @@ static int mlxcpld_i2c_wait_for_tc(struct mlxcpld_i2c_priv *priv)
/*
* Actual read data len will be always the same as
* requested len. 0xff (line pull-up) will be returned
- * if slave has no data to return. Thus don't read
+ * if target has no data to return. Thus don't read
* MLXCPLD_LPCI2C_NUM_DAT_REG reg from CPLD. Only in case of
* SMBus block read transaction data len can be different,
* check this case.
@@ -375,7 +375,7 @@ static void mlxcpld_i2c_xfer_msg(struct mlxcpld_i2c_priv *priv)
}
/*
- * Set target slave address with command for master transfer.
+ * Set target address with command for transfer.
* It should be latest executed function before CPLD transaction.
*/
cmd = (priv->xfer.msg[0].addr << 1) | priv->xfer.cmd;
@@ -449,8 +449,8 @@ static u32 mlxcpld_i2c_func(struct i2c_adapter *adap)
}
static const struct i2c_algorithm mlxcpld_i2c_algo = {
- .master_xfer = mlxcpld_i2c_xfer,
- .functionality = mlxcpld_i2c_func
+ .xfer = mlxcpld_i2c_xfer,
+ .functionality = mlxcpld_i2c_func
};
static const struct i2c_adapter_quirks mlxcpld_i2c_quirks = {
--
2.43.0
