Change the wording of this driver wrt. the newest I2C v7 and SMBus 3.2
specifications and replace "master/slave" with more appropriate terms.
Signed-off-by: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
---
Change since v2:
* reworded comment about NAK for consistency as well (Thanks, Bence!)
drivers/i2c/busses/i2c-cp2615.c | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/drivers/i2c/busses/i2c-cp2615.c b/drivers/i2c/busses/i2c-cp2615.c
index cf3747d87034..e7720ea4045e 100644
--- a/drivers/i2c/busses/i2c-cp2615.c
+++ b/drivers/i2c/busses/i2c-cp2615.c
@@ -60,11 +60,11 @@ enum cp2615_i2c_status {
CP2615_CFG_LOCKED = -6,
/* read_len or write_len out of range */
CP2615_INVALID_PARAM = -4,
- /* I2C slave did not ACK in time */
+ /* I2C target did not ACK in time */
CP2615_TIMEOUT,
/* I2C bus busy */
CP2615_BUS_BUSY,
- /* I2C bus error (ie. device NAK'd the request) */
+ /* I2C bus error (ie. target NAK'd the request) */
CP2615_BUS_ERROR,
CP2615_SUCCESS
};
@@ -211,7 +211,7 @@ static int cp2615_check_iop(struct usb_interface *usbif)
}
static int
-cp2615_i2c_master_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
+cp2615_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
{
struct usb_interface *usbif = adap->algo_data;
int i = 0, ret = 0;
@@ -250,8 +250,8 @@ cp2615_i2c_func(struct i2c_adapter *adap)
}
static const struct i2c_algorithm cp2615_i2c_algo = {
- .master_xfer = cp2615_i2c_master_xfer,
- .functionality = cp2615_i2c_func,
+ .xfer = cp2615_i2c_xfer,
+ .functionality = cp2615_i2c_func,
};
/*
--
2.43.0
