Linux Kernel I2C

• Thread Index

• [PATCHv6 06/24] i2c: omap: split out [XR]DR and [XR]RDY
  • From: Shubhrajyoti D <shubhrajyoti@xxxxxx>
• [PATCHv6 23/24] i2c: omap: sanitize exit path
  • From: Shubhrajyoti D <shubhrajyoti@xxxxxx>
• [PATCHv6 09/24] i2c: omap: switch over to do {} while loop
  • From: Shubhrajyoti D <shubhrajyoti@xxxxxx>
• [PATCHv6 11/24] i2c: omap: switch to platform_get_irq()
  • From: Shubhrajyoti D <shubhrajyoti@xxxxxx>
• [PATCHv6 13/24] i2c: omap: simplify errata check
  • From: Shubhrajyoti D <shubhrajyoti@xxxxxx>
• [PATCHv6 17/24] i2c: omap: get rid of the "complete" label
  • From: Shubhrajyoti D <shubhrajyoti@xxxxxx>
• [PATCHv6 02/24] i2c: omap: simplify num_bytes handling
  • From: Shubhrajyoti D <shubhrajyoti@xxxxxx>
• [PATCHv6 07/24] i2c: omap: improve i462 errata handling
  • From: Shubhrajyoti D <shubhrajyoti@xxxxxx>
• [PATCHv6 12/24] i2c: omap: bus: add a receiver flag
  • From: Shubhrajyoti D <shubhrajyoti@xxxxxx>
• [PATCHv6 10/24] i2c: omap: ack IRQ in parts
  • From: Shubhrajyoti D <shubhrajyoti@xxxxxx>
• [PATCHv6 08/24] i2c: omap: re-factor receive/transmit data loop
  • From: Shubhrajyoti D <shubhrajyoti@xxxxxx>
• [PATCHv6 18/24] i2c: omap: remove redundant status read
  • From: Shubhrajyoti D <shubhrajyoti@xxxxxx>
• [PATCH] i2c: tegra: I2_M_NOSTART functionality not supported in Tegra20
  • From: Laxman Dewangan <ldewangan@xxxxxxxxxx>
• Re: [PATCH] i2c: (i2c-diolan-u2c) Fix master_xfer return code
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] i2c: (i2c-diolan-u2c) Fix master_xfer return code
  • From: Shubhrajyoti Datta <omaplinuxkernel@xxxxxxxxx>
• [RESEND PATCH] i2c: Adding support for Intel iSMT SMBus 2.0 host controller
  • From: Bill Brown <bill.e.brown@xxxxxxxxx>
• Re: [PATCH] i2c: (i2c-diolan-u2c) Fix master_xfer return code
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] i2c: (i2c-diolan-u2c) Fix master_xfer return code
  • From: Shubhrajyoti Datta <omaplinuxkernel@xxxxxxxxx>
• [PATCH 4/5] i2c-i801: Add Device IDs for Intel Lynx Point-LP PCH
  • From: james.d.ralston@xxxxxxxxx
• [PATCH] i2c: (i2c-diolan-u2c) Fix master_xfer return code
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 1/6] i2c: omap: Prevent NULL pointer dereference in remove
  • From: Shubhrajyoti Datta <omaplinuxkernel@xxxxxxxxx>
• [PATCH 6/6] i2c: davinci: Fix a possible NULL pointer access
  • From: Shubhrajyoti D <shubhrajyoti@xxxxxx>
• [PATCH 1/6] i2c: omap: Prevent NULL pointer dereference in remove
  • From: Shubhrajyoti D <shubhrajyoti@xxxxxx>
• [PATCH 5/6] i2c-puv3: Fix a possible NULL pointer access
  • From: Shubhrajyoti D <shubhrajyoti@xxxxxx>
• [PATCH 0/6] I2C cleanup
  • From: Shubhrajyoti D <shubhrajyoti@xxxxxx>
• [PATCH 4/6] i2c: at91: Fix a possible NULL pointer access
  • From: Shubhrajyoti D <shubhrajyoti@xxxxxx>
• [PATCH 3/6] i2c: designware: Fix a possible NULL pointer access
  • From: Shubhrajyoti D <shubhrajyoti@xxxxxx>
• [PATCH 2/6] i2c-xiic: Fix a possible NULL pointer access
  • From: Shubhrajyoti D <shubhrajyoti@xxxxxx>
• Re: [PATCH v6 7/7] ARM: davinci: add support for the am1808 based enbw_cmc board
  • From: Heiko Schocher <hs@xxxxxxx>
• Re: [PATCH 0/4] i2c: tegra: required clock support for controller
  • From: Stephen Warren <swarren@xxxxxxxxxxxxx>
• Re: [PATCH v6 7/7] ARM: davinci: add support for the am1808 based enbw_cmc board
  • From: Sekhar Nori <nsekhar@xxxxxx>
• [PATCH 1/1 v4] i2c: Add default configuration into the Nomadik I2C driver.
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 1/1 v2] i2c: Add default configuration into the Nomadik I2C driver.
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 1/1 v2] i2c: Add default configuration into the Nomadik I2C driver.
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 0/4] i2c: tegra: required clock support for controller
  • From: Laxman Dewangan <ldewangan@xxxxxxxxxx>
• [PATCH 2/4] i2c: tegra: pass proper name for getting clock
  • From: Laxman Dewangan <ldewangan@xxxxxxxxxx>
• [PATCH 4/4] ARM: tegra: clock: remove unused clock entry for i2c
  • From: Laxman Dewangan <ldewangan@xxxxxxxxxx>
• [PATCH 0/4] i2c: tegra: required clock support for controller
  • From: Laxman Dewangan <ldewangan@xxxxxxxxxx>
• [PATCH 3/4] ARM: tegra: clock: add connection name in i2c clock entry
  • From: Laxman Dewangan <ldewangan@xxxxxxxxxx>
• [PATCH 1/4] ARM: tegra: clock: add i2c fast clock entry in clock table
  • From: Laxman Dewangan <ldewangan@xxxxxxxxxx>
• [PATCH RESEND 1/2] i2c: pnx: Fix bit definitions
  • From: Roland Stigge <stigge@xxxxxxxxx>
• [PATCH RESEND 2/2] i2c: pnx: Fix read transactions of >= 2 bytes
  • From: Roland Stigge <stigge@xxxxxxxxx>
• [PATCH] i2c-i801: Add device tree support
  • From: Thierry Reding <thierry.reding@xxxxxxxxxxxxxxxxx>
• [PATCH] i2c: i2c-ocores: Use devm_request_and_ioremap()
  • From: Thierry Reding <thierry.reding@xxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/1 v2] i2c: Add default configuration into the Nomadik I2C driver.
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v7] ARM: davinci: i2c: add OF support
  • From: Heiko Schocher <hs@xxxxxxx>
• Re: [PATCH 1/1 v2] i2c: Add default configuration into the Nomadik I2C driver.
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 1/1 v2] i2c: Add default configuration into the Nomadik I2C driver.
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH] I2C: OMAP: xfer: fix runtime PM get/put balance on error
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH] i2c: fix i2c-i801.c printk format warning
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• [PATCH] i2c: fix i2c-i801.c printk format warning
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxx>
• [PATCH 1/1 v2] i2c: Add default configuration into the Nomadik I2C driver.
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 1/1] i2c: Add default configuration into the Nomadik I2C driver.
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH 1/1] i2c: Add default configuration into the Nomadik I2C driver.
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v2] i2c: convert struct i2c_msg initialization to C99 format
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [PATCH 1/1] i2c: Add default configuration into the Nomadik I2C driver.
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 1/1] i2c: Add default configuration into the Nomadik I2C driver.
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 1/1] i2c: Add default configuration into the Nomadik I2C driver.
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 1/1] i2c: Add default configuration into the Nomadik I2C driver
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH v2] i2c: convert struct i2c_msg initialization to C99 format
  • From: Shubhrajyoti D <shubhrajyoti@xxxxxx>
• [PATCH 2/2] I2C: SIS630: Cosmetics
  • From: Amaury Decrême <amaury.decreme@xxxxxxxxx>
• [PATCH 1/2] I2C: SIS630: Add SiS964 support
  • From: Amaury Decrême <amaury.decreme@xxxxxxxxx>
• [PATCH 0/2] I2C: SIS630: Add SIS964 support
  • From: Amaury Decrême <amaury.decreme@xxxxxxxxx>
• Re: [PATCH v2 0/2] I2C: SIS964: Bus driver
  • From: Amaury Decrême <amaury.decreme@xxxxxxxxx>
• Re: [PATCH v2 0/2] I2C: SIS964: Bus driver
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [PATCH] drivers/i2c/i2c-smbus.c: convert kzalloc to devm_kzalloc
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• [PATCH] drivers/i2c/i2c-smbus.c: convert kzalloc to devm_kzalloc
  • From: Julia Lawall <Julia.Lawall@xxxxxxx>
• Re: [PATCH v2 0/2] I2C: SIS964: Bus driver
  • From: Amaury Decrême <amaury.decreme@xxxxxxxxx>
• Re: linux-next: Tree for Aug 3 (drivers/i2c/busses/i2c-i801.c)
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxx>
• Re: linux-next: Tree for Aug 3 (drivers/i2c/busses/i2c-i801.c)
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: linux-next: Tree for Aug 3 (drivers/i2c/busses/i2c-i801.c)
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxx>
• Re: [PATCH v2 0/2] I2C: SIS964: Bus driver
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [PATCH v2 0/2] I2C: SIS964: Bus driver
  • From: Amaury Decrême <amaury.decreme@xxxxxxxxx>
• Re: [PATCH v2 0/2] I2C: SIS964: Bus driver
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• [PATCH v2 2/2] I2C: SIS964: Bus driver - other files
  • From: Amaury Decrême <amaury.decreme@xxxxxxxxx>
• [PATCH v2 1/2] I2C: SIS964: Bus driver - Driver
  • From: Amaury Decrême <amaury.decreme@xxxxxxxxx>
• [PATCH v2 0/2] I2C: SIS964: Bus driver
  • From: Amaury Decrême <amaury.decreme@xxxxxxxxx>
• Re: [PATCH 1/2] i2c: imx: Use dev_info to indicate that i2c driver was succesfully registered
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] i2c: convert struct i2c_msg initialization to C99 format
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [PATCH] i2c: convert struct i2c_msg initialization to C99 format
  • From: "Datta, Shubhrajyoti" <shubhrajyoti@xxxxxx>
• Re: [PATCH] i2c: convert struct i2c_msg initialization to C99 format
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• [PATCH] i2c: convert struct i2c_msg initialization to C99 format
  • From: Shubhrajyoti D <shubhrajyoti@xxxxxx>
• Re: [PATCH] i2c: convert struct i2c_msg initialization to C99 format
  • From: "Datta, Shubhrajyoti" <shubhrajyoti@xxxxxx>
• [PATCH] i2c: convert struct i2c_msg initialization to C99 format
  • From: Shubhrajyoti D <shubhrajyoti@xxxxxx>
• Re: [PATCH] i2c: Adding support for Intel iSMT SMBus 2.0 host controller
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [PATCH] i2c: Adding support for Intel iSMT SMBus 2.0 host controller
  • From: Bill Brown <bill.e.brown@xxxxxxxxx>
• Re: [PATCH] i2c: muxes: fix build break
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• [PATCH] i2c: muxes: fix build break
  • From: Venu Byravarasu <vbyravarasu@xxxxxxxxxx>
• [PATCH 2/2] i2c: imx: Use dev_dbg logging style
  • From: Fabio Estevam <festevam@xxxxxxxxx>
• [PATCH 1/2] i2c: imx: Use dev_info to indicate that i2c driver was succesfully registered
  • From: Fabio Estevam <festevam@xxxxxxxxx>
• [PATCH] i2c: pxa: fix the clock APIs
  • From: Chao Xie <xiechao.mail@xxxxxxxxx>
• [PATCH] i2c: Adding support for Intel iSMT SMBus 2.0 host controller
  • From: Bill Brown <bill.e.brown@xxxxxxxxx>
• i2c: imx: could not read data
  • From: Gabriel Tisan <gabriel.tisan@xxxxxxxxx>
• [PATCH] i2c: tegra: Fix ifdefs for suspend mode
  • From: Laxman Dewangan <ldewangan@xxxxxxxxxx>
• Re: [PATCH v7] ARM: davinci: i2c: add OF support
  • From: Heiko Schocher <hs@xxxxxxx>
• Re: [PATCH v7] ARM: davinci: i2c: add OF support
  • From: Shubhrajyoti Datta <omaplinuxkernel@xxxxxxxxx>
• [PATCH v7] ARM: davinci: i2c: add OF support
  • From: Heiko Schocher <hs@xxxxxxx>
• Re: [PATCH v6] ARM: davinci: i2c: add OF support
  • From: Heiko Schocher <hs@xxxxxxx>
• [PULL REQUEST] i2c-embedded for 3.6
  • From: Wolfram Sang <w.sang@xxxxxxxxxxxxxx>
• Re: [PATCH 2/2 V3] MXS: Implement DMA support into mxs-i2c
  • From: Shawn Guo <shawn.guo@xxxxxxxxxx>
• Re: [PATCH RFC/RFT] i2c/busses: Fix build error if CONFIG_I2C_DESIGNWARE_PLATFORM=y && CONFIG_I2C_DESIGNWARE_PCI=y
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• [PATCH] i2c-i801: Support SMBus multiplexing on Asus Z8 series
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [PATCH V4 1/2] i2c/adapter: Add bus recovery infrastructure
  • From: Shubhrajyoti Datta <omaplinuxkernel@xxxxxxxxx>
• [PATCH] i2c-mux-gpio: Add support for dynamically allocated GPIO pins
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: i2c-mux-gpio platform device ID issue
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: i2c-mux-gpio platform device ID issue
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: i2c-mux-gpio platform device ID issue
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: i2c-mux-gpio platform device ID issue
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: i2c-mux-gpio platform device ID issue
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH 1/2] i2c: pnx: Fix bit definitions
  • From: Roland Stigge <stigge@xxxxxxxxx>
• [PATCH 2/2] i2c: pnx: Fix read transactions of >= 2 bytes
  • From: Roland Stigge <stigge@xxxxxxxxx>
• Re: i2c-mux-gpio platform device ID issue
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• i2c-mux-gpio platform device ID issue
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• [PATCH] i2c: add Renesas R-Car I2C driver
  • From: Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxxxx>
• Re: [PATCH 5/5] i2c: tegra: convert normal suspend/resume to *_noirq
  • From: Wolfram Sang <w.sang@xxxxxxxxxxxxxx>
• [PATCH] i2c-mux: Add support for device auto-detection
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [PATCH 5/5] i2c: tegra: convert normal suspend/resume to *_noirq
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• [GIT PULL] i2c updates for Linux 3.6
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [PATCH 5/5] i2c: tegra: convert normal suspend/resume to *_noirq
  • From: Peter De Schrijver <pdeschrijver@xxxxxxxxxx>
• Re: [PATCH] I2C: MV64XYZ: Add Device Tree support
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH] I2C: MV64XYZ: Add Device Tree support
  • From: Wolfram Sang <w.sang@xxxxxxxxxxxxxx>
• Re: [PATCH 5/5] i2c: tegra: convert normal suspend/resume to *_noirq
  • From: Stephen Warren <swarren@xxxxxxxxxxxxx>
• Re: [PATCH 09/25] i2c/i2c-omap: add a const qualifier
  • From: "Datta, Shubhrajyoti" <shubhrajyoti@xxxxxx>
• [PATCH 10/25] i2c/mpc: add a const qualifier
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 09/25] i2c/i2c-omap: add a const qualifier
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 23/25] i2c/mpc: make data used as *of_device_id.data const
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• RE: Build error with [PATCH v10 3/4] drivers/i2c/busses/i2c-at91.c
  • From: "Voss, Nikolaus" <N.Voss@xxxxxxxxxxx>
• [PATCH] I2C: MV64XYZ: Add Device Tree support
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH 2/2 V3] MXS: Implement DMA support into mxs-i2c
  • From: Wolfram Sang <w.sang@xxxxxxxxxxxxxx>
• Re: [PATCH 2/2 V3] MXS: Implement DMA support into mxs-i2c
  • From: Marek Vasut <marex@xxxxxxx>
• Re: [PATCH 2/2 V3] MXS: Implement DMA support into mxs-i2c
  • From: Wolfram Sang <w.sang@xxxxxxxxxxxxxx>
• Re: [PATCH 2/2 V3] MXS: Implement DMA support into mxs-i2c
  • From: Marek Vasut <marex@xxxxxxx>
• Re: [PATCH] I2C: MV64XYZ: Add Device Tree support
  • From: Wolfram Sang <w.sang@xxxxxxxxxxxxxx>
• Re: [PATCH 2/2 V3] MXS: Implement DMA support into mxs-i2c
  • From: Wolfram Sang <w.sang@xxxxxxxxxxxxxx>
• [PATCH] I2C: MV64XYZ: Add Device Tree support
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH v6] ARM: davinci: i2c: add OF support
  • From: Wolfram Sang <w.sang@xxxxxxxxxxxxxx>
• Re: [PATCH] i2c: Add support SuperH SH7734 I2C bus controller
  • From: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@xxxxxxxxxxx>
• Re: [PATCH] I2C: SiByte: Convert the driver to make use of interrupts
  • From: "Maciej W. Rozycki" <macro@xxxxxxxxxxxxxx>
• [PATCHv5 17/18] i2c: omap: get rid of the "complete" label
  • From: Shubhrajyoti D <shubhrajyoti@xxxxxx>
• [PATCHv5 03/18] i2c: omap: decrease indentation level on data handling
  • From: Shubhrajyoti D <shubhrajyoti@xxxxxx>
• [PATCHv5 11/18] i2c: omap: switch to platform_get_irq()
  • From: Shubhrajyoti D <shubhrajyoti@xxxxxx>
• [PATCHv5 06/18] i2c: omap: split out [XR]DR and [XR]RDY
  • From: Shubhrajyoti D <shubhrajyoti@xxxxxx>
• [PATCHv5 01/18] i2c: omap: switch to devm_* API
  • From: Shubhrajyoti D <shubhrajyoti@xxxxxx>
• [PATCHv5 04/18] i2c: omap: add blank lines
  • From: Shubhrajyoti D <shubhrajyoti@xxxxxx>
• [PATCHv5 09/18] i2c: omap: switch over to do {} while loop
  • From: Shubhrajyoti D <shubhrajyoti@xxxxxx>
• [PATCHv5 15/18] i2c: omap: simplify IRQ exit path
  • From: Shubhrajyoti D <shubhrajyoti@xxxxxx>
• [PATCHv5 16/18] i2c: omap: resize fifos before each message
  • From: Shubhrajyoti D <shubhrajyoti@xxxxxx>
• [PATCHv5 18/18] i2c: omap: remove redundant status read
  • From: Shubhrajyoti D <shubhrajyoti@xxxxxx>
• [PATCHv5 00/18] I2C big cleanup
  • From: Shubhrajyoti D <shubhrajyoti@xxxxxx>
• [PATCHv5 07/18] i2c: omap: improve i462 errata handling
  • From: Shubhrajyoti D <shubhrajyoti@xxxxxx>
• [PATCHv5 10/18] i2c: omap: ack IRQ in parts
  • From: Shubhrajyoti D <shubhrajyoti@xxxxxx>
• [PATCHv5 12/18] i2c: omap: bus: add a receiver flag
  • From: Shubhrajyoti D <shubhrajyoti@xxxxxx>
• [PATCHv5 02/18] i2c: omap: simplify num_bytes handling
  • From: Shubhrajyoti D <shubhrajyoti@xxxxxx>
• [PATCHv5 14/18] i2c: omap: always return IRQ_HANDLED
  • From: Shubhrajyoti D <shubhrajyoti@xxxxxx>
• [PATCHv5 05/18] i2c: omap: simplify omap_i2c_ack_stat()
  • From: Shubhrajyoti D <shubhrajyoti@xxxxxx>
• [PATCHv5 08/18] i2c: omap: re-factor receive/transmit data loop
  • From: Shubhrajyoti D <shubhrajyoti@xxxxxx>
• [PATCHv5 13/18] i2c: omap: simplify errata check
  • From: Shubhrajyoti D <shubhrajyoti@xxxxxx>
• Re: OMAP: send i2c message ignoring NAK
  • From: Shubhrajyoti <shubhrajyoti@xxxxxx>
• Re: OMAP: send i2c message ignoring NAK
  • From: Yegor Yefremov <yegorslists@xxxxxxxxxxxxxx>
• [PATCH] i2c-gpio: Add support for deferred probing
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [PATCH V4 1/2] i2c/adapter: Add bus recovery infrastructure
  • From: Shubhrajyoti Datta <omaplinuxkernel@xxxxxxxxx>
• Re: Transaction timeout issue with Temperature sensor driver on 2.6.32 kernel.
  • From: bhanuprakash bodireddy <bhanuprakashbodireddy@xxxxxxxxx>
• Re: MXS i2c PIOQ/DMA mode selection via DT
  • From: Marek Vasut <marek.vasut@xxxxxxxxx>
• Re: [RFC/PATCH 3/3] i2c: omap: Add support for I2C_M_STOP message flag
  • From: Shubhrajyoti Datta <omaplinuxkernel@xxxxxxxxx>
• Re: [PATCH] i2c: sis964: bus driver
  • From: Amaury Decrême <amaury.decreme@xxxxxxxxx>
• Re: [RFC/PATCH 3/3] i2c: omap: Add support for I2C_M_STOP message flag
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: Transaction timeout issue with Temperature sensor driver on 2.6.32 kernel.
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [RFC/PATCH 3/3] i2c: omap: Add support for I2C_M_STOP message flag
  • From: Shubhrajyoti <shubhrajyoti@xxxxxx>
• Re: [RFC/PATCH 3/3] i2c: omap: Add support for I2C_M_STOP message flag
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [RFC/PATCH 3/3] i2c: omap: Add support for I2C_M_STOP message flag
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [RFC/PATCH 2/3] i2c: Fall back to emulated SMBus if the operation isn't supported natively
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [RFC/PATCH 2/3] i2c: Fall back to emulated SMBus if the operation isn't supported natively
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: OMAP: send i2c message ignoring NAK
  • From: Shubhrajyoti Datta <omaplinuxkernel@xxxxxxxxx>
• Re: Transaction timeout issue with Temperature sensor driver on 2.6.32 kernel.
  • From: bhanuprakash bodireddy <bhanuprakashbodireddy@xxxxxxxxx>
• Re: [RFC/PATCH 1/3] i2c: Add SCCB support
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [RFC/PATCH 1/3] i2c: Add SCCB support
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [RFC/PATCH 1/3] i2c: Add SCCB support
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: Transaction timeout issue with Temperature sensor driver on 2.6.32 kernel.
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: OMAP: send i2c message ignoring NAK
  • From: Yegor Yefremov <yegorslists@xxxxxxxxxxxxxx>
• Transaction timeout issue with Temperature sensor driver on 2.6.32 kernel.
  • From: bhanuprakash bodireddy <bhanuprakashbodireddy@xxxxxxxxx>
• Re: State of arbitration and i2c_gpio?
  • From: Matthias Urlichs <matthias@xxxxxxxxxx>
• [PATCH v6] ARM: davinci: i2c: add OF support
  • From: Heiko Schocher <hs@xxxxxxx>
• Re: State of arbitration and i2c_gpio?
  • From: Matthias Urlichs <matthias@xxxxxxxxxx>
• Re: State of arbitration and i2c_gpio?
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [PATCH v4] i2c: stu300: use devm managed resources
  • From: Rajeev kumar <rajeev-dlh.kumar@xxxxxx>
• Re: State of arbitration and i2c_gpio?
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [PATCH v5 5/7] ARM: davinci: i2c: add OF support
  • From: Sekhar Nori <nsekhar@xxxxxx>
• Re: State of arbitration and i2c_gpio?
  • From: Laxman Dewangan <ldewangan@xxxxxxxxxx>
• State of arbitration and i2c_gpio?
  • From: Matthias Urlichs <matthias@xxxxxxxxxx>
• MXS i2c PIOQ/DMA mode selection via DT
  • From: Marek Vasut <marek.vasut@xxxxxxxxx>
• Re: [PATCH 2/2 V3] MXS: Implement DMA support into mxs-i2c
  • From: Wolfram Sang <w.sang@xxxxxxxxxxxxxx>
• Re: [PATCH 2/2 V3] MXS: Implement DMA support into mxs-i2c
  • From: Marek Vasut <marex@xxxxxxx>
• Re: [PATCH v4] i2c: stu300: use devm managed resources
  • From: Wolfram Sang <w.sang@xxxxxxxxxxxxxx>
• Re: [PATCH V4 1/2] i2c/adapter: Add bus recovery infrastructure
  • From: viresh kumar <viresh.kumar@xxxxxxxxxx>
• [PATCH v4] i2c: stu300: use devm managed resources
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 2/2 V3] MXS: Implement DMA support into mxs-i2c
  • From: Wolfram Sang <w.sang@xxxxxxxxxxxxxx>
• Re: [PATCH] i2c: stu300: use devm managed resources
  • From: Wolfram Sang <w.sang@xxxxxxxxxxxxxx>
• Re: [RFC PATCH 3/3] i2c: inititalise the actual transferred to zero
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v3 2/4] i2c: i2c-ocores: Use reg-shift property
  • From: Rajeev kumar <rajeev-dlh.kumar@xxxxxx>
• Re: [PATCH v3 1/4] i2c: i2c-ocores - DT bindings and minor fixes.
  • From: Rajeev kumar <rajeev-dlh.kumar@xxxxxx>
• Re: [PATCH] i2c: sis964: bus driver
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [PATCH 2/2 V3] MXS: Implement DMA support into mxs-i2c
  • From: Shawn Guo <shawn.guo@xxxxxxxxxxxxx>
• [PATCH] i2c: stu300: use devm managed resources
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 2/2 V3] MXS: Implement DMA support into mxs-i2c
  • From: Marek Vasut <marex@xxxxxxx>
• Re: [PATCH 2/2 V3] MXS: Implement DMA support into mxs-i2c
  • From: Wolfram Sang <w.sang@xxxxxxxxxxxxxx>
• Re: [PATCH v3 0/4] I2C Ocores updates
  • From: Wolfram Sang <w.sang@xxxxxxxxxxxxxx>
• Re: [PATCH] i2c: sis964: bus driver
  • From: Amaury Decrême <amaury.decreme@xxxxxxxxx>
• Re: [PATCH v5 5/7] ARM: davinci: i2c: add OF support
  • From: Heiko Schocher <hs@xxxxxxx>
• Re: [PATCH] i2c: sis964: bus driver
  • From: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>
• Re: [PATCH v3 4/4] i2c: i2c-ocores: support for 16bit and 32bit IO
  • From: "Jayachandran C." <jayachandranc@xxxxxxxxxxxxxxxxx>
• Re: [PATCH v5 5/7] ARM: davinci: i2c: add OF support
  • From: Sekhar Nori <nsekhar@xxxxxx>
• Re: [PATCH v3 4/4] i2c: i2c-ocores: support for 16bit and 32bit IO
  • From: Shubhrajyoti Datta <omaplinuxkernel@xxxxxxxxx>
• [PATCH v3 4/4] i2c: i2c-ocores: support for 16bit and 32bit IO
  • From: "Jayachandran C" <jayachandranc@xxxxxxxxxxxxxxxxx>
• [PATCH v3 3/4] V4L/DVB: mfd: use reg_shift instead of regstep
  • From: "Jayachandran C" <jayachandranc@xxxxxxxxxxxxxxxxx>
• [PATCH v3 2/4] i2c: i2c-ocores: Use reg-shift property
  • From: "Jayachandran C" <jayachandranc@xxxxxxxxxxxxxxxxx>
• [PATCH v3 1/4] i2c: i2c-ocores - DT bindings and minor fixes.
  • From: "Jayachandran C" <jayachandranc@xxxxxxxxxxxxxxxxx>
• [PATCH v3 0/4] I2C Ocores updates
  • From: "Jayachandran C" <jayachandranc@xxxxxxxxxxxxxxxxx>
• Re: [PATCH 00/11] make struct of_device_id.data const
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH 2/4] i2c: i2c-ocores: Use reg-shift property
  • From: "Jayachandran C." <jayachandranc@xxxxxxxxxxxxxxxxx>
• [PATCH 06/11] i2c/i2c-omap: add a const qualifier
  • From: y@xxxxxxxxxxxxxx
• Re: [PATCH 2/2 V3] MXS: Implement DMA support into mxs-i2c
  • From: Marek Vasut <marex@xxxxxxx>
• Re: [PATCHv11 0/6] I2C cleanups
  • From: Shubhrajyoti <shubhrajyoti@xxxxxx>
• Re: [PATCHv11 1/6] i2c: omap: Optimise the remove code
  • From: Shubhrajyoti <shubhrajyoti@xxxxxx>
• Re: [PATCHv11 3/6] i2c: omap: Do not initialise the completion everytime
  • From: Shubhrajyoti <shubhrajyoti@xxxxxx>
• Re: [PATCHv11 4/6] i2c: omap: Remove the definition of SYSS_RESETDONE_MASK
  • From: Shubhrajyoti <shubhrajyoti@xxxxxx>
• Re: [PATCHv11 5/6] i2c: omap: Correct I2C revision for OMAP3
  • From: Shubhrajyoti <shubhrajyoti@xxxxxx>
• Re: [PATCHv11 6/6] i2c: omap: Recover from Bus Busy condition
  • From: Shubhrajyoti <shubhrajyoti@xxxxxx>
• Re: [PATCH] i2c-s3c2410: Convert to devm_request_and_ioremap()
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH] i2c: sis964: bus driver
  • From: Amaury Decrême <amaury.decreme@xxxxxxxxx>
• Re: [PATCH v2] i2c: stu300: use devm managed resources
  • From: Wolfram Sang <w.sang@xxxxxxxxxxxxxx>
• Re: [PATCH 2/4] i2c: i2c-ocores: Use reg-shift property
  • From: Wolfram Sang <w.sang@xxxxxxxxxxxxxx>
• Re: [PATCH] i2c-s3c2410: Convert to devm_request_and_ioremap()
  • From: Wolfram Sang <w.sang@xxxxxxxxxxxxxx>
• Re: [PATCH] i2c-s3c2410: Fix pointer type passed to of_match_node()
  • From: Wolfram Sang <w.sang@xxxxxxxxxxxxxx>
• Re: [PATCH 2/2 V3] MXS: Implement DMA support into mxs-i2c
  • From: Wolfram Sang <w.sang@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2 V3] MXS: Set I2C timing registers for mxs-i2c
  • From: Wolfram Sang <w.sang@xxxxxxxxxxxxxx>
• [PATCH 3/4] V4L/DVB: mfd: use reg_shift instead of regstep
  • From: "Jayachandran C" <jayachandranc@xxxxxxxxxxxxxxxxx>
• [PATCH 4/4] i2c: i2c-ocores: support for 16bit and 32bit IO
  • From: "Jayachandran C" <jayachandranc@xxxxxxxxxxxxxxxxx>
• [PATCH v2 0/4] I2C Ocores updates
  • From: "Jayachandran C" <jayachandranc@xxxxxxxxxxxxxxxxx>
• [PATCH 2/4] i2c: i2c-ocores: Use reg-shift property
  • From: "Jayachandran C" <jayachandranc@xxxxxxxxxxxxxxxxx>
• [PATCH 1/4] i2c: i2c-ocores - DT bindings and minor fixes.
  • From: "Jayachandran C" <jayachandranc@xxxxxxxxxxxxxxxxx>
• Re: [PATCH 5/8 v2] i2c:i2c-bfin-twi: TWI fails to restart next transfer in high system load.
  • From: Wolfram Sang <w.sang@xxxxxxxxxxxxxx>
• Re: [PATCH 4/8 v2] i2c: i2c-bfin-twi: Tighten condition when failing I2C transfer if MEN bit is reset unexpectedly.
  • From: Wolfram Sang <w.sang@xxxxxxxxxxxxxx>
• Re: [PATCH 1/8 v2] i2c: i2c-bfin-twi: Illegal i2c bus lock upon certain transfer scenarios.
  • From: Wolfram Sang <w.sang@xxxxxxxxxxxxxx>
• Re: [PATCH v2] i2c-tiny-usb: Adds supports for the Robofuzz OSIF USB/i2c, converter
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• [PATCH v2] i2c-tiny-usb: Adds supports for the Robofuzz OSIF USB/i2c, converter
  • From: Emmanuel Deloget <emmanuel.deloget@xxxxxxxxx>
• Re: [PATCH 2/4] i2c: i2c-ocores: Use reg-shift property
  • From: "Jayachandran C." <jayachandranc@xxxxxxxxxxxxxxxxx>
• [PATCH] i2c: mv64xxxx: remove EXPERIMENTAL tag
  • From: Wolfram Sang <w.sang@xxxxxxxxxxxxxx>
• Re: [PATCH] i2c-tiny-usb: Adds supports for the Robofuzz OSIF USB/i2c, converter
  • From: Emmanuel Deloget <emmanuel.deloget@xxxxxxxxx>
• Re: [PATCH] i2c-mv64xxxx: allow more than one driver instance
  • From: Wolfram Sang <w.sang@xxxxxxxxxxxxxx>
• Re: [PATCH 4/4] i2c: i2c-ocores: support for 16bit and 32bit IO
  • From: Wolfram Sang <w.sang@xxxxxxxxxxxxxx>
• Re: [PATCH 3/4] V4L/DVB: mfd: use reg_shift instead of regstep
  • From: Wolfram Sang <w.sang@xxxxxxxxxxxxxx>
• Re: [PATCH 2/4] i2c: i2c-ocores: Use reg-shift property
  • From: Wolfram Sang <w.sang@xxxxxxxxxxxxxx>
• Re: [PATCHv11 0/6] I2C cleanups
  • From: Wolfram Sang <w.sang@xxxxxxxxxxxxxx>
• Re: [PATCH] i2c-tiny-usb: Adds supports for the Robofuzz OSIF USB/i2c, converter
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [PATCHv11 6/6] i2c: omap: Recover from Bus Busy condition
  • From: Wolfram Sang <w.sang@xxxxxxxxxxxxxx>
• Re: [PATCHv11 5/6] i2c: omap: Correct I2C revision for OMAP3
  • From: Wolfram Sang <w.sang@xxxxxxxxxxxxxx>
• Re: [PATCHv11 4/6] i2c: omap: Remove the definition of SYSS_RESETDONE_MASK
  • From: Wolfram Sang <w.sang@xxxxxxxxxxxxxx>
• Re: [PATCHv11 3/6] i2c: omap: Do not initialise the completion everytime
  • From: Wolfram Sang <w.sang@xxxxxxxxxxxxxx>
• Re: [PATCHv11 2/6] i2c: omap: Use SET_RUNTIME_PM_OPS
  • From: Wolfram Sang <w.sang@xxxxxxxxxxxxxx>
• Re: [PATCHv11 1/6] i2c: omap: Optimise the remove code
  • From: Wolfram Sang <w.sang@xxxxxxxxxxxxxx>
• Re: [PATCH 5/5] i2c: tegra: convert normal suspend/resume to *_noirq
  • From: Laxman Dewangan <ldewangan@xxxxxxxxxx>
• Re: [PATCH 5/5] i2c: tegra: convert normal suspend/resume to *_noirq
  • From: Wolfram Sang <w.sang@xxxxxxxxxxxxxx>
• Re: [PATCH 5/5] i2c: tegra: convert normal suspend/resume to *_noirq
  • From: Laxman Dewangan <ldewangan@xxxxxxxxxx>
• Re: [PATCH 5/5] i2c: tegra: convert normal suspend/resume to *_noirq
  • From: Wolfram Sang <w.sang@xxxxxxxxxxxxxx>
• Re: [PATCH 0/7] PM / I2C: Convert platform I2C drivers to PM handling based on struct dev_pm_ops
  • From: Wolfram Sang <w.sang@xxxxxxxxxxxxxx>
• Re: [PATCH 0/7] PM / I2C: Convert platform I2C drivers to PM handling based on struct dev_pm_ops
  • From: "Rafael J. Wysocki" <rjw@xxxxxxx>
• Re: [PATCH 2/5] i2c: tegra: use clk_disable_unprepare in place of clk_disable
  • From: Wolfram Sang <w.sang@xxxxxxxxxxxxxx>
• Re: [PATCH 4/5] i2c: tegra: Use struct dev_pm_ops for power management
  • From: Wolfram Sang <w.sang@xxxxxxxxxxxxxx>
• Re: [PATCH 3/5] i2c: tegra: use of_match_ptr() for match_table initialization
  • From: Wolfram Sang <w.sang@xxxxxxxxxxxxxx>
• Re: [PATCH V2 1/5] i2c: tegra: remove unused member variable
  • From: Wolfram Sang <w.sang@xxxxxxxxxxxxxx>
• [PATCH] i2c-tiny-usb: Adds supports for the Robofuzz OSIF USB/i2c, converter
  • From: Emmanuel Deloget <emmanuel.deloget@xxxxxxxxx>
• Re: [PATCH 0/7] PM / I2C: Convert platform I2C drivers to PM handling based on struct dev_pm_ops
  • From: Laxman Dewangan <ldewangan@xxxxxxxxxx>
• Re: OMAP: send i2c message ignoring NAK
  • From: "Datta, Shubhrajyoti" <shubhrajyoti@xxxxxx>
• RE: Build error with [PATCH v10 3/4] drivers/i2c/busses/i2c-at91.c
  • From: "Voss, Nikolaus" <N.Voss@xxxxxxxxxxx>
• RE: [PATCH 2/7] i2c-bfin-twi: Use struct dev_pm_ops for power management
  • From: "Zhang, Sonic" <Sonic.Zhang@xxxxxxxxxx>
• Re: [PATCH 5/7] i2c-puv3: Use struct dev_pm_ops for power management
  • From: guanxuetao@xxxxxxxxxxxxxxx
• Re: [PATCH] i2c i.MX: Fix divider table
  • From: Richard Zhao <richard.zhao@xxxxxxxxxxxxx>
• Re: [PATCH 6/7] i2c-stu300: Use struct dev_pm_ops for power management
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 3/4] V4L/DVB: mfd: use reg_shift instead of regstep
  • From: Richard Röjfors <richard.rojfors@xxxxxxxxxxxxxx>
• Re: [PATCH] i2c i.MX: Fix divider table
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 2/7] i2c-bfin-twi: Use struct dev_pm_ops for power management
  • From: "Rafael J. Wysocki" <rjw@xxxxxxx>
• [PATCH 1/7] i2c-at91: Use struct dev_pm_ops for power management
  • From: "Rafael J. Wysocki" <rjw@xxxxxxx>
• [PATCH 0/7] PM / I2C: Convert platform I2C drivers to PM handling based on struct dev_pm_ops
  • From: "Rafael J. Wysocki" <rjw@xxxxxxx>
• [PATCH 3/7] i2c-ocores: Use struct dev_pm_ops for power management
  • From: "Rafael J. Wysocki" <rjw@xxxxxxx>
• [PATCH 5/7] i2c-puv3: Use struct dev_pm_ops for power management
  • From: "Rafael J. Wysocki" <rjw@xxxxxxx>
• [PATCH 6/7] i2c-stu300: Use struct dev_pm_ops for power management
  • From: "Rafael J. Wysocki" <rjw@xxxxxxx>
• [PATCH 7/7] i2c-tegra: Use struct dev_pm_ops for power management
  • From: "Rafael J. Wysocki" <rjw@xxxxxxx>
• [PATCH 4/7] i2c-pnx: Use struct dev_pm_ops for power management
  • From: "Rafael J. Wysocki" <rjw@xxxxxxx>
• Re: [PATCH] i2c i.MX: Fix divider table
  • From: Troy Kisky <troy.kisky@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] i2c i.MX: Fix divider table
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: OMAP: send i2c message ignoring NAK
  • From: Shubhrajyoti <shubhrajyoti@xxxxxx>
• Re: OMAP: send i2c message ignoring NAK
  • From: Shubhrajyoti <shubhrajyoti@xxxxxx>
• Re: OMAP: send i2c message ignoring NAK
  • From: Yegor Yefremov <yegorslists@xxxxxxxxxxxxxx>
• Re: [PATCH] i2c i.MX: Fix divider table
  • From: Richard Zhao <richard.zhao@xxxxxxxxxxxxx>
• Re: [PATCH 1/2 V2] MXS: Set I2C timing registers for mxs-i2c
  • From: Marek Vasut <marex@xxxxxxx>
• Re: OMAP: send i2c message ignoring NAK
  • From: Shubhrajyoti Datta <omaplinuxkernel@xxxxxxxxx>
• Re: OMAP: send i2c message ignoring NAK
  • From: Yegor Yefremov <yegorslists@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2 V2] MXS: Set I2C timing registers for mxs-i2c
  • From: Robert Schwebel <robert@xxxxxxxxxxx>
• [PATCH 3/3 v4] i2c-i801: Enable IRQ for byte_by_byte transactions
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• [PATCH 2/3 v4] i2c-i801: Enable interrupts on ICH5/7/8/9/10
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• [PATCH 1/3 v4] i2c-i801: Enable IRQ for SMBus transactions
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• [PATCH 0/3 v4] i2c-i801: Enable irq
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• [PATCH V2 1/5] i2c: tegra: remove unused member variable
  • From: Laxman Dewangan <ldewangan@xxxxxxxxxx>
• Re: [PATCH 1/5] i2c: tegra: remove unused member variable
  • From: Shubhrajyoti Datta <omaplinuxkernel@xxxxxxxxx>
• [PATCH 2/5] i2c: tegra: use clk_disable_unprepare in place of clk_disable
  • From: Laxman Dewangan <ldewangan@xxxxxxxxxx>
• [PATCH 3/5] i2c: tegra: use of_match_ptr() for match_table initialization
  • From: Laxman Dewangan <ldewangan@xxxxxxxxxx>
• [PATCH 1/5] i2c: tegra: remove unused member variable
  • From: Laxman Dewangan <ldewangan@xxxxxxxxxx>
• [PATCH 5/5] i2c: tegra: convert normal suspend/resume to *_noirq
  • From: Laxman Dewangan <ldewangan@xxxxxxxxxx>
• [PATCH 4/5] i2c: tegra: Use struct dev_pm_ops for power management
  • From: Laxman Dewangan <ldewangan@xxxxxxxxxx>
• [PATCH 0/5] i2c: tegra: Code cleanups and suspend/resume related changes
  • From: Laxman Dewangan <ldewangan@xxxxxxxxxx>
• Re: [PATCH V6 0/4] add 88pm80x mfd driver
  • From: Samuel Ortiz <sameo@xxxxxxxxxxxxxxx>
• Re: [PATCH V2] i2c: imx: make bitrate an u32 type
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 4/4] i2c: i2c-ocores: support for 16bit and 32bit IO
  • From: "Jayachandran C" <jayachandranc@xxxxxxxxxxxxxxxxx>
• [PATCH 2/4] i2c: i2c-ocores: Use reg-shift property
  • From: "Jayachandran C" <jayachandranc@xxxxxxxxxxxxxxxxx>
• [PATCH 3/4] V4L/DVB: mfd: use reg_shift instead of regstep
  • From: "Jayachandran C" <jayachandranc@xxxxxxxxxxxxxxxxx>
• [PATCH RESEND 0/4] I2C Ocores updates
  • From: "Jayachandran C" <jayachandranc@xxxxxxxxxxxxxxxxx>
• [PATCH 1/4] i2c: i2c-ocores - DT bindings and minor fixes.
  • From: "Jayachandran C" <jayachandranc@xxxxxxxxxxxxxxxxx>
• [PATCH V6 4/4] input: add onkey support to 88PM80X PMIC
  • From: Qiao Zhou <zhouqiao@xxxxxxxxxxx>
• [PATCH V6 3/4] rtc: add rtc support to 88PM80X PMIC
  • From: Qiao Zhou <zhouqiao@xxxxxxxxxxx>
• [PATCH V6 2/4] mfd: workaround: add companion chip in 88pm80x
  • From: Qiao Zhou <zhouqiao@xxxxxxxxxxx>
• [PATCH V6 1/4] mfd: support 88pm80x in 80x driver
  • From: Qiao Zhou <zhouqiao@xxxxxxxxxxx>
• [PATCH V6 0/4] add 88pm80x mfd driver
  • From: Qiao Zhou <zhouqiao@xxxxxxxxxxx>
• Re: [PATCH V2] i2c: imx: make bitrate an u32 type
  • From: Richard Zhao <linuxzsc@xxxxxxxxx>
• [PATCH V2] i2c: imx: make bitrate an u32 type
  • From: Wolfram Sang <wolfram@xxxxxxxxxxxxx>
• [PATCH v2] i2c: stu300: use devm managed resources
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH V3 0/3] i2c-nomadik changes
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH V3 0/3] i2c-nomadik changes
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 2/2 V3] MXS: Implement DMA support into mxs-i2c
  • From: Marek Vasut <marex@xxxxxxx>
• [PATCH 1/2 V3] MXS: Set I2C timing registers for mxs-i2c
  • From: Marek Vasut <marex@xxxxxxx>
• Re: [PATCH 1/2 V2] MXS: Set I2C timing registers for mxs-i2c
  • From: Marek Vasut <marex@xxxxxxx>
• Re: [PATCH 0/4 V5] add 88pm80x mfd driver
  • From: Qiao Zhou <zhouqiao@xxxxxxxxxxx>
• Re: [PATCH] i2c-s3c2410: Convert to devm_request_and_ioremap()
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] i2c-s3c2410: Convert to devm_request_and_ioremap()
  • From: Wolfram Sang <w.sang@xxxxxxxxxxxxxx>
• RE: [PATCH] i2c_dw: deadlock happening when system is trying to suspend
  • From: "Liu, Chuansheng" <chuansheng.liu@xxxxxxxxx>
• Re: [PATCH] i2c_dw: deadlock happening when system is trying to suspend
  • From: Wolfram Sang <w.sang@xxxxxxxxxxxxxx>
• Re: [PATCH 0/4 V5] add 88pm80x mfd driver
  • From: Samuel Ortiz <sameo@xxxxxxxxxxxxxxx>
• Re: [PATCH 0/4 V5] add 88pm80x mfd driver
  • From: Samuel Ortiz <sameo@xxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: i2c-imx: Adapt the clock name to the new clock framework
  • From: Wolfram Sang <w.sang@xxxxxxxxxxxxxx>
• Re: [PATCH 2/2] i2c: stu300: use devm allocation
  • From: Wolfram Sang <w.sang@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] i2c: stu300: use clk_prepare/unprepare
  • From: Wolfram Sang <w.sang@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2 V2] MXS: Set I2C timing registers for mxs-i2c
  • From: Wolfram Sang <w.sang@xxxxxxxxxxxxxx>
• Re: [PATCHv11 0/6] I2C cleanups
  • From: Shubhrajyoti Datta <omaplinuxkernel@xxxxxxxxx>
• Re: [PATCH 0/4 V5] add 88pm80x mfd driver
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH] i2c: mxs: mxs_i2c_finish_read: mute flase positive uninitialized var
  • From: Wolfram Sang <w.sang@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2 V2] MXS: Set I2C timing registers for mxs-i2c
  • From: Marek Vasut <marex@xxxxxxx>
• Re: [PATCH 0/4 V5] add 88pm80x mfd driver
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/2 V2] MXS: Set I2C timing registers for mxs-i2c
  • From: Wolfram Sang <w.sang@xxxxxxxxxxxxxx>
• Re: [PATCH 0/4 V5] add 88pm80x mfd driver
  • From: Samuel Ortiz <sameo@xxxxxxxxxxxxxxx>
• Re: [PATCH] i2c-nomadik: Add 10-bit addressing support
  • From: Wolfram Sang <w.sang@xxxxxxxxxxxxxx>
• Re: [PATCH V3 0/3] i2c-nomadik changes
  • From: Wolfram Sang <w.sang@xxxxxxxxxxxxxx>
• Re: [PATCH] i2c: imx: make bitrate unsigned int
  • From: Wolfram Sang <w.sang@xxxxxxxxxxxxxx>
• Re: Fwd: Hid over I2C and ACPI interaction
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: Fwd: Hid over I2C and ACPI interaction
  • From: Lan Tianyu <tianyu.lan@xxxxxxxxx>
• Re: [PATCH] i2c: i2c-imx: Adapt the clock name to the new clock framework
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 4/4 V5] input: add onkey support to 88PM80X PMIC
  • From: Qiao Zhou <zhouqiao@xxxxxxxxxxx>
• [PATCH 3/4 V5] rtc: add rtc support to 88PM80X PMIC
  • From: Qiao Zhou <zhouqiao@xxxxxxxxxxx>
• [PATCH 2/4 V5] mfd: workaround: add companion chip in 88pm80x
  • From: Qiao Zhou <zhouqiao@xxxxxxxxxxx>
• [PATCH 0/4 V5] add 88pm80x mfd driver
  • From: Qiao Zhou <zhouqiao@xxxxxxxxxxx>
• [PATCH 1/4 V5] mfd: support 88pm80x in 80x driver
  • From: Qiao Zhou <zhouqiao@xxxxxxxxxxx>
• Re: [PATCH] i2c: imx: make bitrate unsigned int
  • From: Richard Zhao <richard.zhao@xxxxxxxxxxxxx>
• [PATCH 4/4] input: add onkey support to 88PM80X PMIC
  • From: Qiao Zhou <zhouqiao@xxxxxxxxxxx>
• [PATCH 0/4 V4] add 88pm80x mfd driver
  • From: Qiao Zhou <zhouqiao@xxxxxxxxxxx>
• [PATCH 3/4] rtc: add rtc support to 88PM80X PMIC
  • From: Qiao Zhou <zhouqiao@xxxxxxxxxxx>
• [PATCH 2/4] mfd: workaround: add companion chip in 88pm80x
  • From: Qiao Zhou <zhouqiao@xxxxxxxxxxx>
• [PATCH 1/4] mfd: support 88pm80x in 80x driver
  • From: Qiao Zhou <zhouqiao@xxxxxxxxxxx>
• RE: Fwd: Hid over I2C and ACPI interaction
  • From: "Moore, Robert" <robert.moore@xxxxxxxxx>
• Re: Fwd: Hid over I2C and ACPI interaction
  • From: Lan Tianyu <tianyu.lan@xxxxxxxxx>
• Re: Fwd: Hid over I2C and ACPI interaction
  • From: Zhang Rui <rui.zhang@xxxxxxxxx>
• [PATCH] i2c-mv64xxxx: allow more than one driver instance
  • From: Florian Fainelli <ffainelli@xxxxxxxxxx>
• Re: [PATCH 14/15] i2c: iop3xx: use standard gpiolib functions
  • From: Rob Herring <robherring2@xxxxxxxxx>
• Re: [PATCH 8/8 v3] i2c: i801: enable irq for byte_by_byte transactions
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [PATCH 14/15] i2c: iop3xx: use standard gpiolib functions
  • From: Wolfram Sang <w.sang@xxxxxxxxxxxxxx>
• [PATCH] i2c: imx: make bitrate unsigned int
  • From: Wolfram Sang <wolfram@xxxxxxxxxxxxx>
• Re: [PATCH v3] i2c: imx: convert to use managed functions
  • From: Wolfram Sang <w.sang@xxxxxxxxxxxxxx>
• Re: [PATCH] i2c i.MX: Fix divider table
  • From: Shubhrajyoti Datta <omaplinuxkernel@xxxxxxxxx>
• Re: [PATCH] i2c i.MX: Fix divider table
  • From: Baruch Siach <baruch@xxxxxxxxxx>
• Re: [PATCH v2 01/12] ARM: Orion: DT support for IRQ and GPIO Controllers
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH v2 01/12] ARM: Orion: DT support for IRQ and GPIO Controllers
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• [PATCH 14/15] i2c: iop3xx: use standard gpiolib functions
  • From: Rob Herring <robherring2@xxxxxxxxx>
• [PATCH 13/15] i2c: iop3xx: clean-up trailing whitespace
  • From: Rob Herring <robherring2@xxxxxxxxx>
• [PATCH] i2c: i2c-imx: Adapt the clock name to the new clock framework
  • From: Fabio Estevam <fabio.estevam@xxxxxxxxxxxxx>
• Re: [PATCH 7/8 v3] i2c: i801: enable irq for i801 smbus transactions
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [PATCH 7/8 v3] i2c: i801: enable irq for i801 smbus transactions
  • From: Daniel Kurtz <djkurtz@xxxxxxxxxxxx>
• [PATCH 1/4] mfd: support 88pm80x in 80x driver
  • From: Qiao Zhou <zhouqiao@xxxxxxxxxxx>
• [PATCH 3/4] rtc: add rtc support to 88PM80X PMIC
  • From: Qiao Zhou <zhouqiao@xxxxxxxxxxx>
• [PATCH 4/4] input: add onkey support to 88PM80X PMIC
  • From: Qiao Zhou <zhouqiao@xxxxxxxxxxx>
• [PATCH 2/4] mfd: workaround: add companion chip in 88pm80x
  • From: Qiao Zhou <zhouqiao@xxxxxxxxxxx>
• [PATCH 0/4 V4] add 88pm80x mfd driver
  • From: Qiao Zhou <zhouqiao@xxxxxxxxxxx>
• Re: [PATCH] i2c i.MX: Fix divider table
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• [PATCH 2/2 V2] MXS: Implement DMA support into mxs-i2c
  • From: Marek Vasut <marex@xxxxxxx>
• [PATCH 1/2 V2] MXS: Set I2C timing registers for mxs-i2c
  • From: Marek Vasut <marex@xxxxxxx>
• Re: Fwd: Hid over I2C and ACPI interaction
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH] i2c i.MX: Fix divider table
  • From: Richard Zhao <richard.zhao@xxxxxxxxxxxxx>
• Re: [PATCH] i2c i.MX: Fix divider table
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v2 01/12] ARM: Orion: DT support for IRQ and GPIO Controllers
  • From: Mitch Bradley <wmb@xxxxxxxxxxxxx>
• Re: [PATCH] i2c i.MX: Fix divider table
  • From: Shubhrajyoti Datta <omaplinuxkernel@xxxxxxxxx>
• Re: [PATCH v2 01/12] ARM: Orion: DT support for IRQ and GPIO Controllers
  • From: Arnaud Patard (Rtp) <arnaud.patard@xxxxxxxxxxx>
• Re: [PATCH v2 01/12] ARM: Orion: DT support for IRQ and GPIO Controllers
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH] i2c i.MX: Fix divider table
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v2 01/12] ARM: Orion: DT support for IRQ and GPIO Controllers
  • From: Sebastian Hesselbarth <sebastian.hesselbarth@xxxxxxxxxxxxxx>
• Re: [PATCH v2 01/12] ARM: Orion: DT support for IRQ and GPIO Controllers
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH] i2c i.MX: Fix divider table
  • From: Richard Zhao <linuxzsc@xxxxxxxxx>
• Re: [PATCH 8/8 v3] i2c: i801: enable irq for byte_by_byte transactions
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [PATCH v2 01/12] ARM: Orion: DT support for IRQ and GPIO Controllers
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH v2 01/12] ARM: Orion: DT support for IRQ and GPIO Controllers
  • From: Sebastian Hesselbarth <sebastian.hesselbarth@xxxxxxxxxxxxxx>
• Re: [PATCH 1/4] mfd: support 88pm80x in 80x driver
  • From: Qiao Zhou <zhouqiao@xxxxxxxxxxx>
• Re: [PATCH v2 01/12] ARM: Orion: DT support for IRQ and GPIO Controllers
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH v2 01/12] ARM: Orion: DT support for IRQ and GPIO Controllers
  • From: Thomas Petazzoni <thomas.petazzoni@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 01/12] ARM: Orion: DT support for IRQ and GPIO Controllers
  • From: Andrew Lunn <andrew@xxxxxxx>
• [PATCH] i2c i.MX: Fix divider table
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v2 01/12] ARM: Orion: DT support for IRQ and GPIO Controllers
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH v2 01/12] ARM: Orion: DT support for IRQ and GPIO Controllers
  • From: Thomas Petazzoni <thomas.petazzoni@xxxxxxxxxxxxxxxxxx>
• [PATCH v6 7/7] ARM: davinci: add support for the am1808 based enbw_cmc board
  • From: Heiko Schocher <hs@xxxxxxx>
• Re: [PATCH v2 01/12] ARM: Orion: DT support for IRQ and GPIO Controllers
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH v2 01/12] ARM: Orion: DT support for IRQ and GPIO Controllers
  • From: Sebastian Hesselbarth <sebastian.hesselbarth@xxxxxxxxxxxxxx>
• Re: [PATCH 1/4] mfd: support 88pm80x in 80x driver
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH v2 01/12] ARM: Orion: DT support for IRQ and GPIO Controllers
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH v2 01/12] ARM: Orion: DT support for IRQ and GPIO Controllers
  • From: Thomas Petazzoni <thomas.petazzoni@xxxxxxxxxxxxxxxxxx>
• [PATCH 4/4] input: add onkey support to 88PM80X PMIC
  • From: Qiao Zhou <zhouqiao@xxxxxxxxxxx>
• [PATCH 3/4] rtc: add rtc support to 88PM80X PMIC
  • From: Qiao Zhou <zhouqiao@xxxxxxxxxxx>
• [PATCH 2/4] mfd: workaround: add companion chip in 88pm80x
  • From: Qiao Zhou <zhouqiao@xxxxxxxxxxx>
• [PATCH 0/4 V3] add 88pm80x mfd driver
  • From: Qiao Zhou <zhouqiao@xxxxxxxxxxx>
• [PATCH 1/4] mfd: support 88pm80x in 80x driver
  • From: Qiao Zhou <zhouqiao@xxxxxxxxxxx>
• Re: [PATCH v2 01/12] ARM: Orion: DT support for IRQ and GPIO Controllers
  • From: Arnaud Patard (Rtp) <arnaud.patard@xxxxxxxxxxx>
• Re: [PATCH 7/8 v3] i2c: i801: enable irq for i801 smbus transactions
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [PATCH v2 01/12] ARM: Orion: DT support for IRQ and GPIO Controllers
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH v2 01/12] ARM: Orion: DT support for IRQ and GPIO Controllers
  • From: Arnaud Patard (Rtp) <arnaud.patard@xxxxxxxxxxx>
• Re: [PATCH v2 01/12] ARM: Orion: DT support for IRQ and GPIO Controllers
  • From: Thomas Petazzoni <thomas.petazzoni@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 01/12] ARM: Orion: DT support for IRQ and GPIO Controllers
  • From: Thomas Petazzoni <thomas.petazzoni@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 01/12] ARM: Orion: DT support for IRQ and GPIO Controllers
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH v2 01/12] ARM: Orion: DT support for IRQ and GPIO Controllers
  • From: Thomas Petazzoni <thomas.petazzoni@xxxxxxxxxxxxxxxxxx>
• Re: Fwd: Hid over I2C and ACPI interaction
  • From: Benjamin Tissoires <benjamin.tissoires@xxxxxxxxx>
• Re: [PATCH 7/8 v3] i2c: i801: enable irq for i801 smbus transactions
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: Fwd: Hid over I2C and ACPI interaction
  • From: Zhang Rui <rui.zhang@xxxxxxxxx>
• Re: Fwd: Hid over I2C and ACPI interaction
  • From: Zhang Rui <rui.zhang@xxxxxxxxx>
• Re: [PATCH 7/8 v3] i2c: i801: enable irq for i801 smbus transactions
  • From: Daniel Kurtz <djkurtz@xxxxxxxxxxxx>
• Re: [PATCH 7/8 v3] i2c: i801: enable irq for i801 smbus transactions
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [PATCH 7/8 v3] i2c: i801: enable irq for i801 smbus transactions
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• RE: [PATCH 1/4] mfd: support 88pm80x in 80x driver
  • From: Qiao Zhou <zhouqiao@xxxxxxxxxxx>
• RE: [PATCH 1/4] mfd: support 88pm80x in 80x driver
  • From: Qiao Zhou <zhouqiao@xxxxxxxxxxx>
• Re: [PATCH 1/4] mfd: support 88pm80x in 80x driver
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/4] mfd: support 88pm80x in 80x driver
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• RE: [PATCH 1/4] mfd: support 88pm80x in 80x driver
  • From: Qiao Zhou <zhouqiao@xxxxxxxxxxx>
• Hid over I2C and ACPI interaction
  • From: Benjamin Tissoires <benjamin.tissoires@xxxxxxxxx>
• Re: [PATCH] i2c-i801: Consolidate polling
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [PATCH 1/4] mfd: support 88pm80x in 80x driver
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• [PATCH 4/4] input: add onkey support to 88PM80X PMIC
  • From: Qiao Zhou <zhouqiao@xxxxxxxxxxx>
• [PATCH 1/4] mfd: support 88pm80x in 80x driver
  • From: Qiao Zhou <zhouqiao@xxxxxxxxxxx>
• [PATCH 3/4] rtc: add rtc support to 88PM80X PMIC
  • From: Qiao Zhou <zhouqiao@xxxxxxxxxxx>
• [PATCH 2/4] mfd: workaround: add companion chip in 88pm80x
  • From: Qiao Zhou <zhouqiao@xxxxxxxxxxx>
• [PATCH 0/4 V2] add 88pm80x mfd driver
  • From: Qiao Zhou <zhouqiao@xxxxxxxxxxx>
• Re: [PATCH] i2c-i801: Consolidate polling
  • From: Daniel Kurtz <djkurtz@xxxxxxxxxxxx>
• Re: [PATCH] i2c-i801: Consolidate polling
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [PATCH] i2c-i801: Consolidate polling
  • From: Daniel Kurtz <djkurtz@xxxxxxxxxxxx>
• Re: [PATCH v2 08/12] Kirkwood: Add basic device tree support for QNAP TS219.
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH v2 12/12] Crypto: CESA: Add support for DT based instantiation.
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH v2 12/12] Crypto: CESA: Add support for DT based instantiation.
  • From: Florian Fainelli <florian@xxxxxxxxxxx>
• Re: [PATCH v2 08/12] Kirkwood: Add basic device tree support for QNAP TS219.
  • From: Florian Fainelli <florian@xxxxxxxxxxx>
• Re: [PATCH v2 11/12] ARM: Kirkwood: Use DT to configure SATA device.
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH v2 11/12] ARM: Kirkwood: Use DT to configure SATA device.
  • From: Josh Coombs <josh.coombs@xxxxxxxxx>
• Re: [PATCH] i2c: i2c-smbus: Use module_i2c_driver()
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• [PATCHv4 08/18] i2c: omap: re-factor receive/transmit data loop
  • From: Shubhrajyoti D <shubhrajyoti@xxxxxx>
• [PATCHv4 05/18] i2c: omap: simplify omap_i2c_ack_stat()
  • From: Shubhrajyoti D <shubhrajyoti@xxxxxx>
• [PATCHv4 01/18] i2c: omap: switch to devm_* API
  • From: Shubhrajyoti D <shubhrajyoti@xxxxxx>
• [PATCHv4 04/18] i2c: omap: add blank lines
  • From: Shubhrajyoti D <shubhrajyoti@xxxxxx>
• [PATCHv4 09/18] i2c: omap: switch over to do {} while loop
  • From: Shubhrajyoti D <shubhrajyoti@xxxxxx>
• [PATCHv4 12/18] i2c: omap: bus: add a receiver flag
  • From: Shubhrajyoti D <shubhrajyoti@xxxxxx>
• [PATCHv4 06/18] i2c: omap: split out [XR]DR and [XR]RDY
  • From: Shubhrajyoti D <shubhrajyoti@xxxxxx>
• [PATCHv4 15/18] i2c: omap: simplify IRQ exit path
  • From: Shubhrajyoti D <shubhrajyoti@xxxxxx>
• [PATCHv4 11/18] i2c: omap: switch to platform_get_irq()
  • From: Shubhrajyoti D <shubhrajyoti@xxxxxx>
• [PATCHv4 16/18] i2c: omap: resize fifos before each message
  • From: Shubhrajyoti D <shubhrajyoti@xxxxxx>
• [PATCHv4 03/18] i2c: omap: decrease indentation level on data handling
  • From: Shubhrajyoti D <shubhrajyoti@xxxxxx>
• [PATCHv4 14/18] i2c: omap: always return IRQ_HANDLED
  • From: Shubhrajyoti D <shubhrajyoti@xxxxxx>
• [PATCHv4 13/18] i2c: omap: simplify errata check
  • From: Shubhrajyoti D <shubhrajyoti@xxxxxx>
• [PATCHv4 00/18] I2C OMAP big cleanup
  • From: Shubhrajyoti D <shubhrajyoti@xxxxxx>
• [PATCHv4 02/18] i2c: omap: simplify num_bytes handling
  • From: Shubhrajyoti D <shubhrajyoti@xxxxxx>
• [PATCHv4 07/18] i2c: omap: improve i462 errata handling
  • From: Shubhrajyoti D <shubhrajyoti@xxxxxx>
• [PATCHv4 10/18] i2c: omap: ack IRQ in parts
  • From: Shubhrajyoti D <shubhrajyoti@xxxxxx>
• [PATCHv4 17/18] i2c: omap: get rid of the "complete" label
  • From: Shubhrajyoti D <shubhrajyoti@xxxxxx>
• [PATCHv4 18/18] i2c: omap: remove redundant status read
  • From: Shubhrajyoti D <shubhrajyoti@xxxxxx>
• [PATCH v2 12/12] Crypto: CESA: Add support for DT based instantiation.
  • From: Andrew Lunn <andrew@xxxxxxx>
• [PATCH v2 11/12] ARM: Kirkwood: Use DT to configure SATA device.
  • From: Andrew Lunn <andrew@xxxxxxx>
• [PATCH v2 10/12] ATA: sata_mv: Add device tree support
  • From: Andrew Lunn <andrew@xxxxxxx>
• [PATCH v2 09/12] ARM: Kirkwood: DTify the watchdog timer.
  • From: Andrew Lunn <andrew@xxxxxxx>
• [PATCH v2 08/12] Kirkwood: Add basic device tree support for QNAP TS219.
  • From: Andrew Lunn <andrew@xxxxxxx>
• [PATCH v2 06/12] ARM: kirkwood: use devicetree for SPI on dreamplug
  • From: Andrew Lunn <andrew@xxxxxxx>
• [PATCH v2 05/12] ARM: kirkwood: use devicetree for orion-spi
  • From: Andrew Lunn <andrew@xxxxxxx>
• [PATCH v2 04/12] spi-orion: add device tree binding
  • From: Andrew Lunn <andrew@xxxxxxx>
• [PATCH v2 03/12] spi-orion: remove uneeded spi_info
  • From: Andrew Lunn <andrew@xxxxxxx>
• [PATCH v2 01/12] ARM: Orion: DT support for IRQ and GPIO Controllers
  • From: Andrew Lunn <andrew@xxxxxxx>
• [PATCH v2 02/12] SPI: Refactor spi-orion to use SPI framework queue.
  • From: Andrew Lunn <andrew@xxxxxxx>
• [PATCH v2 00/12] IRQ, GPIO SPI, I2C, etc DTC support
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH] i2c-i801: Consolidate polling
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [PATCH] i2c-i801: Consolidate polling
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [PATCH] i2c-i801: Consolidate polling
  • From: Daniel Kurtz <djkurtz@xxxxxxxxxxxx>
• Re: OMAP: send i2c message ignoring NAK
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• [PATCH] i2c-i801: Consolidate polling
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• OMAP: send i2c message ignoring NAK
  • From: Yegor Yefremov <yegorslists@xxxxxxxxxxxxxx>
• Re: [PATCH 1/3] mfd: support 88pm80x in 80x driver
  • From: Qiao Zhou <zhouqiao@xxxxxxxxxxx>
• Re: [PATCH 1/3] mfd: support 88pm80x in 80x driver
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• [PATCH] i2c: i2c-smbus: Use module_i2c_driver()
  • From: Fabio Estevam <fabio.estevam@xxxxxxxxxxxxx>
• Re: [PATCH 3/8 v3] i2c: i801: check INTR after every transaction
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [RFC PATCH 1/3] i2c: add 'actual' field to struct i2c_msg
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [RFC PATCH 3/3] i2c: inititalise the actual transferred to zero
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [PATCHv3 17/17] i2c: omap: get rid of the "complete" label
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCHv3 06/17] i2c: omap: split out [XR]DR and [XR]RDY
  • From: Shubhrajyoti Datta <omaplinuxkernel@xxxxxxxxx>
• Re: [PATCHv3 06/17] i2c: omap: split out [XR]DR and [XR]RDY
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [RFC PATCH 3/3] i2c: inititalise the actual transferred to zero
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH V4 1/2] i2c/adapter: Add bus recovery infrastructure
  • From: Shiraz Hashim <shiraz.hashim@xxxxxx>
• Re: [PATCH 3/8 v3] i2c: i801: check INTR after every transaction
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [PATCH 2/2] i2c/designware: Provide optional i2c bus recovery function
  • From: Rajeev kumar <rajeev-dlh.kumar@xxxxxx>
• Re: [PATCH 2/2] i2c/designware: Provide optional i2c bus recovery function
  • From: Shubhrajyoti Datta <omaplinuxkernel@xxxxxxxxx>
• Re: [PATCH 2/2] i2c/designware: Provide optional i2c bus recovery function
  • From: Rajeev kumar <rajeev-dlh.kumar@xxxxxx>
• Re: [PATCH 3/8 v3] i2c: i801: check INTR after every transaction
  • From: Daniel Kurtz <djkurtz@xxxxxxxxxxxx>
• [PATCH] i2c: mxs: mxs_i2c_finish_read: mute flase positive uninitialized var
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH 3/8 v3] i2c: i801: check INTR after every transaction
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [PATCH] I2C: SiByte: Convert the driver to make use of interrupts
  • From: Matt Turner <mattst88@xxxxxxxxx>
• Re: [PATCH] I2C: OMAP: fix runtime PM get/put balance on error
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [RFC PATCH 3/3] i2c: inititalise the actual transferred to zero
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [RFC PATCH 3/3] i2c: inititalise the actual transferred to zero
  • From: Shubhrajyoti <shubhrajyoti@xxxxxx>
• Re: [RFC PATCH 3/3] i2c: inititalise the actual transferred to zero
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [PATCH] I2C: OMAP: fix runtime PM get/put balance on error
  • From: Shubhrajyoti <shubhrajyoti@xxxxxx>
• Re: [RFC PATCH 3/3] i2c: inititalise the actual transferred to zero
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [RFC PATCH 1/3] i2c: add 'actual' field to struct i2c_msg
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [PATCH 2/2] MXS: Implement DMA support into mxs-i2c
  • From: Dong Aisheng <aisheng.dong@xxxxxxxxxxxxx>
• Re: [PATCH] I2C: OMAP: fix runtime PM get/put balance on error
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH 1/2] MXS: Set I2C timing registers for mxs-i2c
  • From: Shawn Guo <shawn.guo@xxxxxxxxxx>
• [RFC PATCH 2/3] i2c: omap: implement handling for 'actual' bytes transferred
  • From: Shubhrajyoti D <shubhrajyoti@xxxxxx>
• [RFC PATCH 1/3] i2c: add 'actual' field to struct i2c_msg
  • From: Shubhrajyoti D <shubhrajyoti@xxxxxx>
• [RFC PATCH 3/3] i2c: inititalise the actual transferred to zero
  • From: Shubhrajyoti D <shubhrajyoti@xxxxxx>
• [RFC PATCH 0/3] I2C: Report the actual transferred bytes
  • From: Shubhrajyoti D <shubhrajyoti@xxxxxx>
• [PATCH] i2c: Export an unlocked flavor of i2c_transfer
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• [PATCHv3 06/17] i2c: omap: split out [XR]DR and [XR]RDY
  • From: Shubhrajyoti D <shubhrajyoti@xxxxxx>
• [PATCHv3 00/17] I2C Big cleanup
  • From: Shubhrajyoti D <shubhrajyoti@xxxxxx>
• [PATCHv3 16/17] i2c: omap: resize fifos before each message
  • From: Shubhrajyoti D <shubhrajyoti@xxxxxx>
• [PATCHv3 13/17] i2c: omap: simplify errata check
  • From: Shubhrajyoti D <shubhrajyoti@xxxxxx>
• [PATCHv3 07/17] i2c: omap: improve i462 errata handling
  • From: Shubhrajyoti D <shubhrajyoti@xxxxxx>
• [PATCHv3 08/17] i2c: omap: re-factor receive/transmit data loop
  • From: Shubhrajyoti D <shubhrajyoti@xxxxxx>
• [PATCHv3 01/17] i2c: omap: switch to devm_* API
  • From: Shubhrajyoti D <shubhrajyoti@xxxxxx>
• [PATCHv3 04/17] i2c: omap: add blank lines
  • From: Shubhrajyoti D <shubhrajyoti@xxxxxx>
• [PATCHv3 09/17] i2c: omap: switch over to do {} while loop
  • From: Shubhrajyoti D <shubhrajyoti@xxxxxx>
• [PATCHv3 14/17] i2c: omap: always return IRQ_HANDLED
  • From: Shubhrajyoti D <shubhrajyoti@xxxxxx>
• [PATCHv3 11/17] i2c: omap: switch to platform_get_irq()
  • From: Shubhrajyoti D <shubhrajyoti@xxxxxx>
• [PATCHv3 12/17] i2c: omap: bus: add a receiver flag
  • From: Shubhrajyoti D <shubhrajyoti@xxxxxx>
• [PATCHv3 03/17] i2c: omap: decrease indentation level on data handling
  • From: Shubhrajyoti D <shubhrajyoti@xxxxxx>
• [PATCHv3 05/17] i2c: omap: simplify omap_i2c_ack_stat()
  • From: Shubhrajyoti D <shubhrajyoti@xxxxxx>
• [PATCHv3 15/17] i2c: omap: simplify IRQ exit path
  • From: Shubhrajyoti D <shubhrajyoti@xxxxxx>
• [PATCHv3 17/17] i2c: omap: get rid of the "complete" label
  • From: Shubhrajyoti D <shubhrajyoti@xxxxxx>
• [PATCHv3 10/17] i2c: omap: ack IRQ in parts
  • From: Shubhrajyoti D <shubhrajyoti@xxxxxx>
• [PATCHv3 02/17] i2c: omap: simplify num_bytes handling
  • From: Shubhrajyoti D <shubhrajyoti@xxxxxx>
• Re: [PATCH 1/2] MXS: Set I2C timing registers for mxs-i2c
  • From: Marek Vasut <marex@xxxxxxx>
• Re: [PATCH 2/2] MXS: Implement DMA support into mxs-i2c
  • From: Marek Vasut <marex@xxxxxxx>
• Re: [PATCH 1/2] MXS: Set I2C timing registers for mxs-i2c
  • From: Dong Aisheng <aisheng.dong@xxxxxxxxxxxxx>
• Re: [PATCH 2/2] MXS: Implement DMA support into mxs-i2c
  • From: Dong Aisheng <aisheng.dong@xxxxxxxxxxxxx>
• Re: [PATCH 1/2] MXS: Set I2C timing registers for mxs-i2c
  • From: Marek Vasut <marex@xxxxxxx>
• Re: [PATCH] i2c-s3c2410: Use plain pm_runtime_put()
  • From: Shubhrajyoti Datta <omaplinuxkernel@xxxxxxxxx>
• Re: [PATCH 2/2] MXS: Implement DMA support into mxs-i2c
  • From: Marek Vasut <marex@xxxxxxx>
• Re: [PATCH 2/2] MXS: Implement DMA support into mxs-i2c
  • From: Dong Aisheng <aisheng.dong@xxxxxxxxxxxxx>
• Re: [PATCH 1/2] MXS: Set I2C timing registers for mxs-i2c
  • From: Dong Aisheng <aisheng.dong@xxxxxxxxxxxxx>
• [PATCH] I2C: OMAP: fix runtime PM get/put balance on error
  • From: Shubhrajyoti D <shubhrajyoti@xxxxxx>
• [PATCH 2/2] MXS: Implement DMA support into mxs-i2c
  • From: Marek Vasut <marex@xxxxxxx>
• [PATCH 1/2] MXS: Set I2C timing registers for mxs-i2c
  • From: Marek Vasut <marex@xxxxxxx>
• Re: [PATCH] I2C: OMAP: xfer: fix runtime PM get/put balance on error
  • From: Shubhrajyoti <shubhrajyoti@xxxxxx>
• RE: [PATCHv11 3/6] i2c: omap: Do not initialise the completion everytime
  • From: "Zhang, Shijie" <shijie.zhang@xxxxxxxxx>
• Re: [PATCH] I2C: OMAP: xfer: fix runtime PM get/put balance on error
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCHv11 3/6] i2c: omap: Do not initialise the completion everytime
  • From: "ABRAHAM, KISHON VIJAY" <kishon@xxxxxx>
• [PATCHv11 4/6] i2c: omap: Remove the definition of SYSS_RESETDONE_MASK
  • From: Shubhrajyoti D <shubhrajyoti@xxxxxx>
• [PATCHv11 2/6] i2c: omap: Use SET_RUNTIME_PM_OPS
  • From: Shubhrajyoti D <shubhrajyoti@xxxxxx>
• [PATCHv11 5/6] i2c: omap: Correct I2C revision for OMAP3
  • From: Shubhrajyoti D <shubhrajyoti@xxxxxx>
• [PATCHv11 3/6] i2c: omap: Do not initialise the completion everytime
  • From: Shubhrajyoti D <shubhrajyoti@xxxxxx>
• [PATCHv11 1/6] i2c: omap: Optimise the remove code
  • From: Shubhrajyoti D <shubhrajyoti@xxxxxx>
• [PATCHv11 0/6] I2C cleanups
  • From: Shubhrajyoti D <shubhrajyoti@xxxxxx>
• [PATCHv11 6/6] i2c: omap: Recover from Bus Busy condition
  • From: Shubhrajyoti D <shubhrajyoti@xxxxxx>
• [PATCH] i2c-s3c2410: Use plain pm_runtime_put()
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH] i2c-s3c2410: Convert to devm_request_and_ioremap()
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] i2c-i801: Clear only status bits in HST_STS after waiting for INTR
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [PATCH 3/8 v3] i2c: i801: check INTR after every transaction
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• [PATCH] i2c-i801: Clear only status bits in HST_STS after waiting for INTR
  • From: Daniel Kurtz <djkurtz@xxxxxxxxxxxx>
• Re: [PATCH 3/8 v3] i2c: i801: check INTR after every transaction
  • From: Daniel Kurtz <djkurtz@xxxxxxxxxxxx>
• Re: [PATCH 4/8 v3] i2c: i801: check and return errors during byte-by-byte transfers
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [PATCH 6/8 v3] i2c: i801: drop ENABLE_INT9
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [PATCH 4/8 v3] i2c: i801: check and return errors during byte-by-byte transfers
  • From: Daniel Kurtz <djkurtz@xxxxxxxxxxxx>
• Re: [PATCH 5/8 v3] i2c: i801: rename some SMBHSTCNT bit constants
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [PATCH 4/8 v3] i2c: i801: check and return errors during byte-by-byte transfers
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [PATCH 3/8 v3] i2c: i801: check INTR after every transaction
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [PATCH] i2c: tegra: use clk_disable_unprepare in place of clk_disable
  • From: Laxman Dewangan <ldewangan@xxxxxxxxxx>
• Re: [PATCH 2/8 v3] i2c: i801: optimize waiting for HWPEC to finish
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [PATCH 1/8 v3] i2c: i801: refactor use of LAST_BYTE i801_block_transaction_byte_by_byte
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [PATCH 0/3 v2] i2c: i801: enable irq
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [PATCH 0/3 v2] i2c: i801: enable irq
  • From: Daniel Kurtz <djkurtz@xxxxxxxxxxxx>
• [PATCH 4/8 v3] i2c: i801: check and return errors during byte-by-byte transfers
  • From: Daniel Kurtz <djkurtz@xxxxxxxxxxxx>
• [PATCH 0/8 v3] i2c: i801: enable irq
  • From: Daniel Kurtz <djkurtz@xxxxxxxxxxxx>
• [PATCH 6/8 v3] i2c: i801: drop ENABLE_INT9
  • From: Daniel Kurtz <djkurtz@xxxxxxxxxxxx>
• [PATCH 2/8 v3] i2c: i801: optimize waiting for HWPEC to finish
  • From: Daniel Kurtz <djkurtz@xxxxxxxxxxxx>
• [PATCH 1/8 v3] i2c: i801: refactor use of LAST_BYTE i801_block_transaction_byte_by_byte
  • From: Daniel Kurtz <djkurtz@xxxxxxxxxxxx>
• [PATCH 8/8 v3] i2c: i801: enable irq for byte_by_byte transactions
  • From: Daniel Kurtz <djkurtz@xxxxxxxxxxxx>
• [PATCH 3/8 v3] i2c: i801: check INTR after every transaction
  • From: Daniel Kurtz <djkurtz@xxxxxxxxxxxx>
• [PATCH 7/8 v3] i2c: i801: enable irq for i801 smbus transactions
  • From: Daniel Kurtz <djkurtz@xxxxxxxxxxxx>
• [PATCH 5/8 v3] i2c: i801: rename some SMBHSTCNT bit constants
  • From: Daniel Kurtz <djkurtz@xxxxxxxxxxxx>
• Re: i801_smbus: ... you should use it instead of the native driver
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [PATCH 0/3 v2] i2c: i801: enable irq
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [PATCH 07/11] I2C: OMAP: Handle error check for pm runtime
  • From: Shubhrajyoti Datta <omaplinuxkernel@xxxxxxxxx>
• Re: [PATCH] I2C: OMAP: xfer: fix runtime PM get/put balance on error
  • From: Shubhrajyoti Datta <omaplinuxkernel@xxxxxxxxx>
• Re: [PATCH 1/2 V3] MXS: Set I2C timing registers for mxs-i2c
  • From: Marek Vasut <marex@xxxxxxx>
• Re: [PATCH 1/2 V3] MXS: Set I2C timing registers for mxs-i2c
  • From: Shawn Guo <shawn.guo@xxxxxxxxxx>
• [PATCH] I2C: OMAP: xfer: fix runtime PM get/put balance on error
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH 07/11] I2C: OMAP: Handle error check for pm runtime
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH 1/2 V3] MXS: Set I2C timing registers for mxs-i2c
  • From: Marek Vasut <marex@xxxxxxx>
• Re: [PATCH 1/2 V3] MXS: Set I2C timing registers for mxs-i2c
  • From: Marek Vasut <marex@xxxxxxx>
• Re: [RFC/PATCH 0/3] OMAP3 I2C/SCCB support
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [RFC/PATCH 0/3] OMAP3 I2C/SCCB support
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [RFC/PATCH 0/3] OMAP3 I2C/SCCB support
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [RFC/PATCH 0/3] OMAP3 I2C/SCCB support
  • From: Gary Thomas <gary@xxxxxxxxxxxx>
• Re: [PATCH] i2c: tegra: use clk_disable_unprepare in place of clk_disable
  • From: Stephen Warren <swarren@xxxxxxxxxxxxx>
• Re: [PATCH 3/3 v2] i2c: i801: enable irq for byte_by_byte transactions
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [RFC/PATCH 0/3] OMAP3 I2C/SCCB support
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [RFC/PATCH 0/3] OMAP3 I2C/SCCB support
  • From: jean-philippe francois <jp.francois@xxxxxxxxxx>
• [PATCH] i2c_dw: deadlock happening when system is trying to suspend
  • From: "Liu, Chuansheng" <chuansheng.liu@xxxxxxxxx>
• [RFC/PATCH 2/3] i2c: Fall back to emulated SMBus if the operation isn't supported natively
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• [RFC/PATCH 1/3] i2c: Add SCCB support
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• [RFC/PATCH 3/3] i2c: omap: Add support for I2C_M_STOP message flag
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• [RFC/PATCH 0/3] OMAP3 I2C/SCCB support
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCHv10 1/7] I2C: OMAP: I2C register restore only if context is lost
  • From: Shubhrajyoti <shubhrajyoti@xxxxxx>
• Re: [PATCHv8 03/13] I2C: OMAP: Remove reset at init
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] i2c: tegra: use clk_disable_unprepare in place of clk_disable
  • From: Laxman Dewangan <ldewangan@xxxxxxxxxx>
• Re: [PATCHv10 1/7] I2C: OMAP: I2C register restore only if context is lost
  • From: Shubhrajyoti <shubhrajyoti@xxxxxx>
• Re: [PATCH] i2c-nomadik: Add 10-bit addressing support
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 1/2 V3] MXS: Set I2C timing registers for mxs-i2c
  • From: Marek Vasut <marex@xxxxxxx>
• Re: [PATCH] i2c: tegra: use clk_disable_unprepare in place of clk_disable
  • From: Stephen Warren <swarren@xxxxxxxxxxxxx>
• Re: [PATCH 1/2 V3] MXS: Set I2C timing registers for mxs-i2c
  • From: Shawn Guo <shawn.guo@xxxxxxxxxx>
• [PATCH] i2c-nomadik: Add 10-bit addressing support
  • From: Srinidhi KASAGAR <srinidhi.kasagar@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] i2c: Update my e-mail address
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [PATCHv10 6/7] I2C: OMAP: Correct I2C revision for OMAP3
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCHv10 5/7] I2C: OMAP: Remove the definition of SYSS_RESETDONE_MASK
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCHv10 4/7] I2C: OMAP: Do not initialise the completion everytime
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCHv10 1/7] I2C: OMAP: I2C register restore only if context is lost
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCHv10 4/7] I2C: OMAP: Do not initialise the completion everytime
  • From: Shubhrajyoti D <shubhrajyoti@xxxxxx>
• [PATCHv10 2/7] I2C: OMAP: Optimise the remove code
  • From: Shubhrajyoti D <shubhrajyoti@xxxxxx>
• [PATCHv10 1/7] I2C: OMAP: I2C register restore only if context is lost
  • From: Shubhrajyoti D <shubhrajyoti@xxxxxx>
• [PATCHv10 6/7] I2C: OMAP: Correct I2C revision for OMAP3
  • From: Shubhrajyoti D <shubhrajyoti@xxxxxx>
• [PATCHv10 5/7] I2C: OMAP: Remove the definition of SYSS_RESETDONE_MASK
  • From: Shubhrajyoti D <shubhrajyoti@xxxxxx>
• [PATCHv10 7/7] I2C: OMAP: Recover from Bus Busy condition
  • From: Shubhrajyoti D <shubhrajyoti@xxxxxx>
• [PATCHv9 0/7] I2C cleanups
  • From: Shubhrajyoti D <shubhrajyoti@xxxxxx>
• [PATCHv10 3/7] I2C: OMAP: Use SET_RUNTIME_PM_OPS
  • From: Shubhrajyoti D <shubhrajyoti@xxxxxx>
• Re: [PATCHv9 3/8] I2C: OMAP: use devm_* functions
  • From: Shubhrajyoti Datta <omaplinuxkernel@xxxxxxxxx>
• Re: [PATCHv9 3/8] I2C: OMAP: use devm_* functions
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] i2c: tegra: use clk_disable_unprepare in place of clk_disable
  • From: Laxman Dewangan <ldewangan@xxxxxxxxxx>
• Re: [PATCH 1/2 V3] MXS: Set I2C timing registers for mxs-i2c
  • From: Marek Vasut <marex@xxxxxxx>
• Re: [PATCH 1/2 V3] MXS: Set I2C timing registers for mxs-i2c
  • From: Marek Vasut <marex@xxxxxxx>
• [PATCH 1/2] i2c: Update my e-mail address
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH 2/2] libi2c: Use I2C_SMBUS_BLOCK_MAX
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• [PATCH 1/2] libi2c: Propagate error codes
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• [PATCHv9 8/8] I2C: OMAP: Recover from Bus Busy condition
  • From: Shubhrajyoti D <shubhrajyoti@xxxxxx>
• [PATCHv9 2/8] I2C: OMAP: Optimise the remove code
  • From: Shubhrajyoti D <shubhrajyoti@xxxxxx>
• [PATCHv9 1/8] I2C: OMAP: I2C register restore only if context is lost
  • From: Shubhrajyoti D <shubhrajyoti@xxxxxx>
• [PATCHv9 0/8] I2C cleanups
  • From: Shubhrajyoti D <shubhrajyoti@xxxxxx>
• [PATCHv9 3/8] I2C: OMAP: use devm_* functions
  • From: Shubhrajyoti D <shubhrajyoti@xxxxxx>
• [PATCHv9 7/8] I2C: OMAP: Correct I2C revision for OMAP3
  • From: Shubhrajyoti D <shubhrajyoti@xxxxxx>
• [PATCHv9 4/8] I2C: OMAP: Use SET_RUNTIME_PM_OPS
  • From: Shubhrajyoti D <shubhrajyoti@xxxxxx>
• [PATCHv9 6/8] I2C: OMAP: Remove the definition of SYSS_RESETDONE_MASK
  • From: Shubhrajyoti D <shubhrajyoti@xxxxxx>
• [PATCHv9 5/8] I2C: OMAP: Do not initialise the completion everytime
  • From: Shubhrajyoti D <shubhrajyoti@xxxxxx>
• Re: [PATCHv8 03/13] I2C: OMAP: Remove reset at init
  • From: Shubhrajyoti <shubhrajyoti@xxxxxx>
• Re: [PATCHv8 03/13] I2C: OMAP: Remove reset at init
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCHv8 03/13] I2C: OMAP: Remove reset at init
  • From: Shubhrajyoti <shubhrajyoti@xxxxxx>
• Re: [PATCHv8 06/13] I2C: OMAP: Correct I2C revision for OMAP3
  • From: Shubhrajyoti Datta <omaplinuxkernel@xxxxxxxxx>
• Re: [PATCH 07/15] i2c: Add Device Tree support to the Nomadik I2C driver
  • From: Srinidhi Kasagar <srinidhi.kasagar@xxxxxxxxxxxxxx>