Re: [PATCH v3 1/4] i2c: i2c-ocores - DT bindings and minor fixes.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 7/13/2012 7:14 PM, Jayachandran C wrote:
Cleanups to i2c-cores, no change in logic, changes are:
* Move i2c-ocores device tree documentation from source file to
   Documentation/devicetree/bindings/i2c/i2c-ocores.txt.
* Add \n to dev_warn and dev_err messages where missing
* Minor updates to the text and formatting fixes.

Signed-off-by: Jayachandran C<jayachandranc@xxxxxxxxxxxxxxxxx>
---
  .../devicetree/bindings/i2c/i2c-ocores.txt         |   27 ++++++++++++
  drivers/i2c/busses/i2c-ocores.c                    |   45 +++-----------------
  2 files changed, 34 insertions(+), 38 deletions(-)
  create mode 100644 Documentation/devicetree/bindings/i2c/i2c-ocores.txt

diff --git a/Documentation/devicetree/bindings/i2c/i2c-ocores.txt b/Documentation/devicetree/bindings/i2c/i2c-ocores.txt
new file mode 100644
index 0000000..bfec894
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-ocores.txt
@@ -0,0 +1,27 @@
+Device tree configuration for i2c-ocores
+
+Required properties:
+- compatible      : "opencores,i2c-ocores"
+- reg             : bus address start and address range size of device
+- interrupts      : interrupt number
+- regstep         : size of device registers in bytes
+- clock-frequency : frequency of bus clock in Hz
+- #address-cells  : should be<1>
+- #size-cells     : should be<0>
+
+Example:
+
+	i2c0: ocores@a0000000 {
+		#address-cells =<1>;
+		#size-cells =<0>;
+		compatible = "opencores,i2c-ocores";
+		reg =<0xa0000000 0x8>;
+		interrupts =<10>;
+		regstep =<1>;
+		clock-frequency =<20000000>;
+
+		dummy@60 {
+			compatible = "dummy";
+			reg =<0x60>;
+		};
+	};
diff --git a/drivers/i2c/busses/i2c-ocores.c b/drivers/i2c/busses/i2c-ocores.c
index 75194c5..e8159db 100644
--- a/drivers/i2c/busses/i2c-ocores.c
+++ b/drivers/i2c/busses/i2c-ocores.c
@@ -10,40 +10,9 @@
   */

  /*
- * Device tree configuration:
- *
- * Required properties:
- * - compatible      : "opencores,i2c-ocores"
- * - reg             : bus address start and address range size of device
- * - interrupts      : interrupt number
- * - regstep         : size of device registers in bytes
- * - clock-frequency : frequency of bus clock in Hz
- *
- * Example:
- *
- *  i2c0: ocores@a0000000 {
- *              compatible = "opencores,i2c-ocores";
- *              reg =<0xa0000000 0x8>;
- *              interrupts =<10>;
- *
- *              regstep =<1>;
- *              clock-frequency =<20000000>;
- *
- * -- Devices connected on this I2C bus get
- * -- defined here; address- and size-cells
- * -- apply to these child devices
- *
- *              #address-cells =<1>;
- *              #size-cells =<0>;
- *
- *              dummy@60 {
- *                     compatible = "dummy";
- *                     reg =<60>;
- *              };
- *  };
- *
+ * This driver can be used from the device tree, see
+ *     Documentation/devicetree/bindings/i2c/ocore-i2c.txt
   */
-
  #include<linux/kernel.h>
  #include<linux/module.h>
  #include<linux/init.h>
@@ -247,14 +216,14 @@ static struct i2c_adapter ocores_adapter = {
  };

  #ifdef CONFIG_OF
-static int ocores_i2c_of_probe(struct platform_device* pdev,
-				struct ocores_i2c* i2c)
+static int ocores_i2c_of_probe(struct platform_device *pdev,
+				struct ocores_i2c *i2c)
  {
  	const __be32* val;

  	val = of_get_property(pdev->dev.of_node, "regstep", NULL);
  	if (!val) {
-		dev_err(&pdev->dev, "Missing required parameter 'regstep'");
+		dev_err(&pdev->dev, "Missing required parameter 'regstep'\n");
  		return -ENODEV;
  	}
  	i2c->regstep = be32_to_cpup(val);
@@ -262,7 +231,7 @@ static int ocores_i2c_of_probe(struct platform_device* pdev,
  	val = of_get_property(pdev->dev.of_node, "clock-frequency", NULL);
  	if (!val) {
  		dev_err(&pdev->dev,
-			"Missing required parameter 'clock-frequency'");
+			"Missing required parameter 'clock-frequency'\n");
  		return -ENODEV;
  	}
  	i2c->clock_khz = be32_to_cpup(val) / 1000;
@@ -351,7 +320,7 @@ static int __devinit ocores_i2c_probe(struct platform_device *pdev)
  	return 0;
  }

-static int __devexit ocores_i2c_remove(struct platform_device* pdev)
+static int __devexit ocores_i2c_remove(struct platform_device *pdev)
  {
  	struct ocores_i2c *i2c = platform_get_drvdata(pdev);


Reviewed By: Rajeev Kumar <rajeev-dlh.kumar@xxxxxx>
--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux