Linux Kernel I2C
[Prev Page][Next Page]
- Re: [PATCH 03/15] extcon: cht-wc: Add Intel Cherry Trail Whiskey Cove PMIC extcon driver
- From: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
- Re: [PATCH 03/15] extcon: cht-wc: Add Intel Cherry Trail Whiskey Cove PMIC extcon driver
- From: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
- [PATCH v5] hwmon: ads7828 optional parameters from the device tree
- From: Sam Povilus <kernel.development@xxxxxxxx>
- Re: [PATCH 10/15] power: supply: bq24190_charger: Use extcon to determine ilimit, 5v boost
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- Re: [PATCH 03/15] extcon: cht-wc: Add Intel Cherry Trail Whiskey Cove PMIC extcon driver
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- Re: [PATCH 03/15] extcon: cht-wc: Add Intel Cherry Trail Whiskey Cove PMIC extcon driver
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- Re: [PATCH 1/2] i2c: do not leave semaphore armed when copying properties fails
- From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
- Re: [PATCH 4/4] eeprom: at24: Add OF device ID table
- From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
- Re: i2c-mux-pca954x ACPI case
- From: Peter Rosin <peda@xxxxxxxxxx>
- i2c-mux-pca954x ACPI case
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- Re: [PATCH] i2c: tegra-bpmp: Enable Tegra BPMP I2C adapter
- From: Thierry Reding <thierry.reding@xxxxxxxxx>
- Re: [PATCH] i2c-designware: increase timeout of semaphore transfer
- From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
- Re: [PATCH] i2c-designware: increase timeout of semaphore transfer
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- Re: [PATCH] i2c-designware: increase timeout of semaphore transfer
- From: Oliver Neukum <oneukum@xxxxxxxx>
- [PATCH] i2c-designware: increase timeout of semaphore transfer
- From: Oliver Neukum <oneukum@xxxxxxxx>
- Re: [PATCH 03/15] extcon: cht-wc: Add Intel Cherry Trail Whiskey Cove PMIC extcon driver
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- Re: [PATCH 01/15] mfd: Add Cherry Trail Whiskey Cove PMIC driver
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- [PATCH] i2c: designware-baytrail: fix potential null pointer dereference on dev
- From: Colin King <colin.king@xxxxxxxxxxxxx>
- [PATCH v7 4/6] i2c: designware: introducing I2C_SLAVE definitions
- From: Luis Oliveira <Luis.Oliveira@xxxxxxxxxxxx>
- [PATCH v7 5/6] i2c: designware: add SLAVE mode functions
- From: Luis Oliveira <Luis.Oliveira@xxxxxxxxxxxx>
- [PATCH v7 6/6] i2c: designware: enable SLAVE in platform module
- From: Luis Oliveira <Luis.Oliveira@xxxxxxxxxxxx>
- [PATCH v7 2/6] i2c: designware: refactoring of the i2c-designware
- From: Luis Oliveira <Luis.Oliveira@xxxxxxxxxxxx>
- [PATCH v7 3/6] i2c: designware: MASTER mode as separated driver
- From: Luis Oliveira <Luis.Oliveira@xxxxxxxxxxxx>
- [PATCH v7 0/6] i2c: designware: add I2C SLAVE support
- From: Luis Oliveira <Luis.Oliveira@xxxxxxxxxxxx>
- [PATCH v7 1/6] i2c: designware: Cleaning and comment style fixes.
- From: Luis Oliveira <Luis.Oliveira@xxxxxxxxxxxx>
- Re: [PATCH 01/15] mfd: Add Cherry Trail Whiskey Cove PMIC driver
- From: Lee Jones <lee.jones@xxxxxxxxxx>
- Re: [PATCH 13/15] i2c: core: Allow drivers to specify index for irq to get from of / ACPI
- From: kbuild test robot <lkp@xxxxxxxxx>
- Re: [PATCH 09/15] power: supply: bq24190_charger: Add voltage_max_design prop to battery
- From: Sebastian Reichel <sre@xxxxxxxxxx>
- Re: [PATCH 14/15] power: supply: Add driver for Cherry Trail Whiskey Cove PMIC Fuel Gauge
- From: Sebastian Reichel <sre@xxxxxxxxxx>
- Re: [PATCH 10/15] power: supply: bq24190_charger: Use extcon to determine ilimit, 5v boost
- From: Sebastian Reichel <sre@xxxxxxxxxx>
- Re: [PATCH 06/15] power: supply: bq24190_charger: Use i2c-core irq-mapping code
- From: Sebastian Reichel <sre@xxxxxxxxxx>
- Re: [PATCH 03/15] extcon: cht-wc: Add Intel Cherry Trail Whiskey Cove PMIC extcon driver
- From: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
- Re: [PATCH v4] hwmon: ads7828 optional parameters from the device tree
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
- [PATCH v4] hwmon: ads7828 optional parameters from the device tree
- From: Sam Povilus <kernel.development@xxxxxxxx>
- Re: [PATCH v1 2/7] dt-bindings: iio: rockchip-saradc: add support for rk3328
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH 3/5] i2c: i2c-stm32f7: add driver
- From: "M'boumba Cedric Madianga" <cedric.madianga@xxxxxxxxx>
- Re: [PATCH 15/15] i2c-cht-wc: Add Intel Cherry Trail Whiskey Cove SMBUS controller driver
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- Re: [PATCH 14/15] power: supply: Add driver for Cherry Trail Whiskey Cove PMIC Fuel Gauge
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- Re: [PATCH 13/15] i2c: core: Allow drivers to specify index for irq to get from of / ACPI
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- Re: [PATCH 12/15] i2c: core: Add new i2c_acpi_new_device helper function
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- Re: [PATCH 11/15] i2c: core: Allow getting ACPI info by index
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- Re: [PATCH 10/15] power: supply: bq24190_charger: Use extcon to determine ilimit, 5v boost
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- Re: [PATCH 06/15] power: supply: bq24190_charger: Use i2c-core irq-mapping code
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- Re: [PATCH 04/15] power: supply: bq24190_charger: Add no_register_reset pdata flag
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- Re: [PATCH 03/15] extcon: cht-wc: Add Intel Cherry Trail Whiskey Cove PMIC extcon driver
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- Re: [PATCH 01/15] mfd: Add Cherry Trail Whiskey Cove PMIC driver
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- Re: [PATCH 3/5] i2c: i2c-stm32f7: add driver
- From: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
- Re: [PATCH 3/5] i2c: i2c-stm32f7: add driver
- From: "M'boumba Cedric Madianga" <cedric.madianga@xxxxxxxxx>
- Re: [PATCH 3/5] i2c: i2c-stm32f7: add driver
- From: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
- Re: [PATCH 3/5] i2c: i2c-stm32f7: add driver
- From: "M'boumba Cedric Madianga" <cedric.madianga@xxxxxxxxx>
- Re: [RESEND PATCH v6 5/6] i2c: designware: add SLAVE mode functions
- From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
- Re: [RESEND PATCH v6 5/6] i2c: designware: add SLAVE mode functions
- From: Luis Oliveira <Luis.Oliveira@xxxxxxxxxxxx>
- Re: [PATCH 3/5] i2c: i2c-stm32f7: add driver
- From: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
- [PATCH 09/15] power: supply: bq24190_charger: Add voltage_max_design prop to battery
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- [PATCH 04/15] power: supply: bq24190_charger: Add no_register_reset pdata flag
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- [PATCH 05/15] power: supply: bq24190_charger: Limit charging voltage to 4.3V
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- [PATCH 06/15] power: supply: bq24190_charger: Use i2c-core irq-mapping code
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- [PATCH 07/15] power: supply: bq24190_charger: Add support for bq24192[i]
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- [PATCH 08/15] power: supply: bq24190_charger: Add support for external fuel gauge
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- [PATCH 11/15] i2c: core: Allow getting ACPI info by index
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- [PATCH 10/15] power: supply: bq24190_charger: Use extcon to determine ilimit, 5v boost
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- [PATCH 0/5] Add support for the STM32F7 I2C
- From: "M'boumba Cedric Madianga" <cedric.madianga@xxxxxxxxx>
- [PATCH 1/5] dt-bindings: i2c-stm32: Document the STM32F7 I2C bindings
- From: "M'boumba Cedric Madianga" <cedric.madianga@xxxxxxxxx>
- [PATCH 4/5] ARM: dts: stm32: Add I2C1 support for STM32F746 SoC
- From: "M'boumba Cedric Madianga" <cedric.madianga@xxxxxxxxx>
- [PATCH 3/5] i2c: i2c-stm32f7: add driver
- From: "M'boumba Cedric Madianga" <cedric.madianga@xxxxxxxxx>
- [PATCH 2/5] i2c: i2c-stm32f4: use generic definition of speed enum
- From: "M'boumba Cedric Madianga" <cedric.madianga@xxxxxxxxx>
- [PATCH 5/5] ARM: dts: stm32: Add I2C1 support for STM32F746 eval board
- From: "M'boumba Cedric Madianga" <cedric.madianga@xxxxxxxxx>
- [PATCH 13/15] i2c: core: Allow drivers to specify index for irq to get from of / ACPI
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- [PATCH 12/15] i2c: core: Add new i2c_acpi_new_device helper function
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- [PATCH 14/15] power: supply: Add driver for Cherry Trail Whiskey Cove PMIC Fuel Gauge
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- [PATCH 15/15] i2c-cht-wc: Add Intel Cherry Trail Whiskey Cove SMBUS controller driver
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- [PATCH 00/15] Add Intel Cherry Trail Whiskey Cove PMIC support
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- [PATCH 02/15] ACPI / PMIC: Add opregion driver for Intel CHT Whiskey Cove PMIC
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- [PATCH 01/15] mfd: Add Cherry Trail Whiskey Cove PMIC driver
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- [PATCH 03/15] extcon: cht-wc: Add Intel Cherry Trail Whiskey Cove PMIC extcon driver
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- Re: [PATCH v1 6/7] arm64: dts: rockchip: add dts file for RK3328 evaluation board
- From: Heiko Stuebner <heiko@xxxxxxxxx>
- Re: [PATCH] i2c-designware: increase timeout of semaphore transfer
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- Re: [PATCH v1 6/7] arm64: dts: rockchip: add dts file for RK3328 evaluation board
- From: 陈亮 <cl@xxxxxxxxxxxxxx>
- Re: [PATCH] Documentation: devicetree: move trivial-devices out of I2C realm
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH] Documentation: devicetree: move trivial-devices out of I2C realm
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH 12/19] i2c: mux: pca954x: make use of raw_spinlock variants
- From: Peter Rosin <peda@xxxxxxxxxx>
- Re: [PATCH v3] hwmon: ads7828 optional parameters from the device tree
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
- Re: [PATCH] i2c-designware: increase timeout of semaphore transfer
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- [PATCH] i2c-designware: increase timeout of semaphore transfer
- From: Oliver Neukum <oneukum@xxxxxxxx>
- Re: [PATCH v1 6/7] arm64: dts: rockchip: add dts file for RK3328 evaluation board
- From: Andre Przywara <andre.przywara@xxxxxxx>
- Re: [PATCH v1 5/7] arm64: dts: rockchip: add core dtsi file for RK3328 SoCs
- From: Andre Przywara <andre.przywara@xxxxxxx>
- Re: [PATCH 4/4] eeprom: at24: Add OF device ID table
- From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
- Re: [PATCH 4/4] eeprom: at24: Add OF device ID table
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH 4/4] eeprom: at24: Add OF device ID table
- From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
- Re: [PATCH v2 2/6] dt-bindings: i2c: rk3x: add support for rk3328
- From: Heiko Stuebner <heiko@xxxxxxxxx>
- Re: [PATCH 4/4] eeprom: at24: Add OF device ID table
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH v2 1/6] dt-bindings: iio: rockchip-saradc: add support for rk3328
- From: Heiko Stuebner <heiko@xxxxxxxxx>
- Re: [PATCH v3] hwmon: ads7828 optional parameters from the device tree
- From: Sam Povilus <kernel.development@xxxxxxxx>
- [PATCH v2 4/6] arm64: dts: rockchip: add core dtsi file for RK3328 SoCs
- From: <cl@xxxxxxxxxxxxxx>
- [PATCH v2 6/6] dt-bindings: document rockchip rk3328-evb board
- From: <cl@xxxxxxxxxxxxxx>
- [PATCH v2 5/6] arm64: dts: rockchip: add dts file for RK3328
- From: <cl@xxxxxxxxxxxxxx>
- [PATCH v2 2/6] dt-bindings: i2c: rk3x: add support for rk3328
- From: <cl@xxxxxxxxxxxxxx>
- [PATCH v2 0/6] initialize dtsi file and dts file for RK3328 SoCs
- From: <cl@xxxxxxxxxxxxxx>
- [PATCH v2 1/6] dt-bindings: iio: rockchip-saradc: add support for rk3328
- From: <cl@xxxxxxxxxxxxxx>
- [PATCH v2 3/6] dt-bindings: soc: rockchip: grf: add support for rk3328
- From: <cl@xxxxxxxxxxxxxx>
- Re: [PATCH 4/4] eeprom: at24: Add OF device ID table
- From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
- Re: [PATCH 4/4] eeprom: at24: Add OF device ID table
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH 4/4] eeprom: at24: Add OF device ID table
- From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
- Re: [PATCH v1 2/7] dt-bindings: iio: rockchip-saradc: add support for rk3328
- From: Heiko Stuebner <heiko@xxxxxxxxx>
- Re: [PATCH v1 3/7] dt-bindings: i2c: rk3x: add support for rk3328
- From: Heiko Stuebner <heiko@xxxxxxxxx>
- Re: [PATCH v1 1/7] include: dt-bindings: Add pin function index definition for rockchip pinctrl
- From: Heiko Stübner <heiko@xxxxxxxxx>
- Re: [PATCH v3] hwmon: ads7828 optional parameters from the device tree
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
- Re: [PATCH v3] hwmon: ads7828 optional parameters from the device tree
- From: Sam Povilus <kernel.development@xxxxxxxx>
- [PATCH v1 7/7] dt-bindings: document rockchip rk3328-evb board
- From: <cl@xxxxxxxxxxxxxx>
- [PATCH v1 5/7] arm64: dts: rockchip: add core dtsi file for RK3328 SoCs
- From: <cl@xxxxxxxxxxxxxx>
- [PATCH v1 6/7] arm64: dts: rockchip: add dts file for RK3328 evaluation board
- From: <cl@xxxxxxxxxxxxxx>
- Re: [PATCH 4/4] eeprom: at24: Add OF device ID table
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
- Re: [PATCH v10 03/11] mux: minimal mux subsystem and gpio-based mux controller
- From: Peter Rosin <peda@xxxxxxxxxx>
- Re: [RESEND PATCH v3 1/2] dt-bindings: i2c: Add Mediatek MT2701 i2c binding
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v3] i2c-tools: add new tool 'i2ctransfer'
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- [PATCH] i2c: tegra-bpmp: Enable Tegra BPMP I2C adapter
- From: Jon Hunter <jonathanh@xxxxxxxxxx>
- Re: [PATCH 4/4] eeprom: at24: Add OF device ID table
- From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
- [PATCH v2 02/14] i2c: mv64xxx: simplify optional reset handling
- From: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>
- Re: [PATCH 4/4] eeprom: at24: Add OF device ID table
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
- Re: [PATCH v1 0/7] initialize dtsi file and dts file for RK3328 SoCs
- From: Heiko Stübner <heiko@xxxxxxxxx>
- Re: [PATCH 4/4] eeprom: at24: Add OF device ID table
- From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
- Re: Linux irq subsys i2c interaction question
- From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
- [PATCH v1 4/7] dt-bindings: soc: rockchip: grf: add support for rk3328
- From: <cl@xxxxxxxxxxxxxx>
- [PATCH v1 1/7] include: dt-bindings: Add pin function index definition for rockchip pinctrl
- From: <cl@xxxxxxxxxxxxxx>
- [PATCH v1 3/7] dt-bindings: i2c: rk3x: add support for rk3328
- From: <cl@xxxxxxxxxxxxxx>
- [PATCH v1 2/7] dt-bindings: iio: rockchip-saradc: add support for rk3328
- From: <cl@xxxxxxxxxxxxxx>
- [PATCH v1 0/7] initialize dtsi file and dts file for RK3328 SoCs
- From: <cl@xxxxxxxxxxxxxx>
- Re: [PATCH 4/4] eeprom: at24: Add OF device ID table
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH 4/4] eeprom: at24: Add OF device ID table
- From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
- Re: [PATCH 4/4] eeprom: at24: Add OF device ID table
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
- [PATCH v4 09/10] i2c: meson: remove meson_i2c_write_tokens
- From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
- [PATCH v4 03/10] i2c: meson: set clock divider in probe instead of setting it for each transfer
- From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
- [PATCH v4 10/10] i2c: meson: improve and simplify interrupt handler
- From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
- [PATCH v4 05/10] i2c: meson: use full 12 bits for clock divider
- From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
- [PATCH v4 08/10] i2c: meson: don't create separate token chain just for the stop command
- From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
- [PATCH v4 04/10] i2c: meson: use i2c core for DT clock-frequency parsing
- From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
- [PATCH v4 07/10] i2c: meson: improve interrupt handler and detect spurious interrupts
- From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
- [PATCH v4 06/10] i2c: meson: remove variable count from meson_i2c_xfer
- From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
- [PATCH v4 02/10] i2c: meson: remove member irq from struct meson_i2c
- From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
- [PATCH v4 01/10] i2c: meson: use min instead of min_t where min_t isn't needed
- From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
- [PATCH v4 00/10] i2c: meson: series with improvements
- From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
- [PATCH 4/4] eeprom: at24: Add OF device ID table
- From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
- [PATCH 0/4] misc: Add OF device table to I2C drivers that are missing it
- From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
- Re: [PATCH v3 04/10] i2c: meson: use i2c core for DT clock-frequency parsing
- From: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
- Re: i2c-mux adapter names not unique
- From: Danielle Costantino <danielle.costantino@xxxxxxxxx>
- [PATCH v3 2/2] i2c: designware: Disable pm for PMIC i2c-bus even if there is no _SEM method
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- [PATCH v3 1/2] i2c: designware: Never suspend i2c-busses used for accessing the system PMIC
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- Re: i2c-mux adapter names not unique
- From: Peter Rosin <peda@xxxxxxxxxx>
- Re: [PATCH v3 04/10] i2c: meson: use i2c core for DT clock-frequency parsing
- From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
- Re: i2c-mux adapter names not unique
- From: MikeB <mabnhdev@xxxxxxxxx>
- Re: i2c-mux adapter names not unique
- From: Peter Rosin <peda@xxxxxxxxxx>
- Re: i2c-mux adapter names not unique
- From: MikeB <mabnhdev@xxxxxxxxx>
- Re: [PATCH v3] i2c-tools: add new tool 'i2ctransfer'
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
- Re: i2c-mux adapter names not unique
- From: Peter Rosin <peda@xxxxxxxxxx>
- i2c-mux adapter names not unique
- From: MikeB <mabnhdev@xxxxxxxxx>
- Re: [i2c-tools PATCH v2] i2ctransfer: add new tool
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [i2c-tools PATCH v2] i2ctransfer: add new tool
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
- Re: [PATCH v3] i2c-tools: add new tool 'i2ctransfer'
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- [PATCH v3] i2c-tools: add new tool 'i2ctransfer'
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [i2c-tools PATCH v2] i2ctransfer: add new tool
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH v3 04/10] i2c: meson: use i2c core for DT clock-frequency parsing
- From: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
- Re: [PULL] topic/designware-baytrail for 4.12 [UPDATED]
- From: Daniel Vetter <daniel@xxxxxxxx>
- Re: [PATCH] Documentation: devicetree: move trivial-devices out of I2C realm
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH v3] hwmon: ads7828 optional parameters from the device tree
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
- [PATCH v3] hwmon: ads7828 optional parameters from the device tree
- From: Sam Povilus <kernel.development@xxxxxxxx>
- [PATCH] i2c: xlp9xx: update for ARCH_THUNDER2
- From: Jayachandran C <jnair@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH v2] Adding the ability for the ads7828 and ads7830 to use the device tree to get thier optional parameters, instead of using platform devices. This allows people using custom boards to also use the ads7828 in a non-default manner.
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
- [PATCH v2] Adding the ability for the ads7828 and ads7830 to use the device tree to get thier optional parameters, instead of using platform devices. This allows people using custom boards to also use the ads7828 in a non-default manner.
- From: Sam Povilus <kernel.development@xxxxxxxx>
- [PATCH] Adding the ability for the ads7828 and ads7830 to use the device tree to get thier optional parameters, instead of using platform devices. This allows people using custom boards to also use the ads7828 in a non-default manner.
- From: Sam Povilus <kernel.development@xxxxxxxx>
- [PATCH v3 10/10] i2c: meson: improve and simplify interrupt handler
- From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
- [PATCH v3 09/10] i2c: meson: remove meson_i2c_write_tokens
- From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
- [PATCH v3 08/10] i2c: meson: don't create separate token chain just for the stop command
- From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
- [PATCH v3 07/10] i2c: meson: improve interrupt handler and detect spurious interrupts
- From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
- [PATCH v3 06/10] i2c: meson: remove variable count from meson_i2c_xfer
- From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
- [PATCH v3 05/10] i2c: meson: use full 12 bits for clock divider
- From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
- [PATCH v3 04/10] i2c: meson: use i2c core for DT clock-frequency parsing
- From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
- [PATCH v3 03/10] i2c: meson: set clock divider in probe instead of setting it for each transfer
- From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
- [PATCH v3 02/10] i2c: meson: remove member irq from struct meson_i2c
- From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
- [PATCH v3 01/10] i2c: meson: use min instead of min_t where min_t isn't needed
- From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
- [PATCH v3 00/10] i2c: meson: series with improvements
- From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
- Re: [PULL REQUEST] i2c for 4.11
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- [PATCH v2 3/3] i2c: core: Allow drivers to specify index for irq to get from of / acpi
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- [PATCH v2 2/3] i2c: core: Add new i2c_acpi_new_device helper function
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- [PATCH v2 1/3] i2c: core: Allow getting acpi info by index
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- Re: [PATCH v2 05/10] i2c: meson: set clock divider in probe instead of setting it for each transfer
- From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
- Re: [PATCH v2 05/10] i2c: meson: set clock divider in probe instead of setting it for each transfer
- From: Kevin Hilman <khilman@xxxxxxxxxxxx>
- [PATCH 3/3] i2c: core: Allow drivers to specify index for irq to get from of / acpi
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- [PATCH 2/3] i2c: core: Add new i2c_acpi_new_device helper function
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- [PATCH 1/3] i2c: core: Allow getting acpi info by index
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- Re: [PATCH v2 2/2] i2c: designware: Disable pm for PMIC i2c-bus even if there is no _SEM method
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- Re: [PULL REQUEST] i2c for 4.11
- From: Linus Torvalds <torvalds@xxxxxxxxxxxxxxxxxxxx>
- [PATCH] i2c: i2c-scmi: add a MS HID
- From: Viktor Krasnov <vkrasnov@xxxxxxxxxxxxx>
- [PULL REQUEST] i2c for 4.11
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH v2 2/2] i2c: designware: Disable pm for PMIC i2c-bus even if there is no _SEM method
- From: "Lan, Tianyu" <tianyu.lan@xxxxxxxxx>
- [PATCH v10 03/11] mux: minimal mux subsystem and gpio-based mux controller
- From: Peter Rosin <peda@xxxxxxxxxx>
- [PATCH v10 05/11] dt-bindings: iio: io-channel-mux: document io-channel-mux bindings
- From: Peter Rosin <peda@xxxxxxxxxx>
- [PATCH v10 07/11] dt-bindings: i2c: i2c-mux: document general purpose i2c-mux bindings
- From: Peter Rosin <peda@xxxxxxxxxx>
- [PATCH v10 04/11] iio: inkern: api for manipulating ext_info of iio channels
- From: Peter Rosin <peda@xxxxxxxxxx>
- [PATCH v10 08/11] i2c: i2c-mux-gpmux: new driver
- From: Peter Rosin <peda@xxxxxxxxxx>
- [PATCH v10 09/11] dt-bindings: mux-adg792a: document devicetree bindings for ADG792A/G mux
- From: Peter Rosin <peda@xxxxxxxxxx>
- [PATCH v10 10/11] mux: adg792a: add mux controller driver for ADG792A/G
- From: Peter Rosin <peda@xxxxxxxxxx>
- [PATCH v10 06/11] iio: multiplexer: new iio category and iio-mux driver
- From: Peter Rosin <peda@xxxxxxxxxx>
- [PATCH v10 11/11] iio: multiplexer: fix unsigned check with less than zero
- From: Peter Rosin <peda@xxxxxxxxxx>
- [PATCH v10 00/11] mux controller abstraction and iio/i2c muxes
- From: Peter Rosin <peda@xxxxxxxxxx>
- [PATCH v10 01/11] devres: trivial whitespace fix
- From: Peter Rosin <peda@xxxxxxxxxx>
- [PATCH v10 02/11] dt-bindings: document devicetree bindings for mux-controllers and gpio-mux
- From: Peter Rosin <peda@xxxxxxxxxx>
- Re: [PATCH v2 2/2] i2c: designware: Disable pm for PMIC i2c-bus even if there is no _SEM method
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- Re: [PATCH v2 2/2] i2c: designware: Disable pm for PMIC i2c-bus even if there is no _SEM method
- From: Lan Tianyu <tianyu.lan@xxxxxxxxx>
- Re: [PATCH 1/2] i2c: do not leave semaphore armed when copying properties fails
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH v2 03/10] i2c: meson: use i2c core for DT clock-frequency parsing
- From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
- Re: [PATCH 07/12] i2c: meson: improve interrupt handler and detect spurious interrupts
- From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
- Re: [PATCH 1/2] i2c: do not leave semaphore armed when copying properties fails
- From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
- [PATCH 12/19] i2c: mux: pca954x: make use of raw_spinlock variants
- From: Julia Cartwright <julia@xxxxxx>
- Re: [PATCH] i2c: exynos5: Avoid transaction timeouts due TRANSFER_DONE_AUTO not set
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH] i2c: add missing of_node_put in i2c_mux_del_adapters
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH v2 2/2] i2c: designware: Disable pm for PMIC i2c-bus even if there is no _SEM method
- From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
- Re: [PATCH v2 1/2] i2c: designware: Never suspend i2c-busses used for accessing the system PMIC
- From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
- Re: [PATCH v2 2/2] i2c: designware: Disable pm for PMIC i2c-bus even if there is no _SEM method
- From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
- Re: [PATCH v2 1/2] i2c: designware: Never suspend i2c-busses used for accessing the system PMIC
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH 1/2] i2c: do not leave semaphore armed when copying properties fails
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH] i2c: m65xx: drop superfluous quirk structure
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH v3 resend] i2c: designware: add reset interface
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH] i2c: meson: fix wrong variable usage in meson_i2c_put_data
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH] i2c: add missing of_node_put in i2c_mux_del_adapters
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH] i2c: riic: fix restart condition
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [v2] i2c: brcmstb: Fix START and STOP conditions
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH v2 1/2] i2c: designware: Never suspend i2c-busses used for accessing the system PMIC
- From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
- Re: [PATCH v2] i2c: exynos5: fix arbitration lost handling
- From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
- Re: [PATCH v2] i2c: exynos5: fix arbitration lost handling
- From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
- [PATCH] i2c: exynos5: Avoid transaction timeouts due TRANSFER_DONE_AUTO not set
- From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
- Re: [PATCH v2] i2c: exynos5: fix arbitration lost handling
- From: Andrzej Hajda <a.hajda@xxxxxxxxxxx>
- Re: [PATCH v2] i2c: exynos5: fix arbitration lost handling
- From: Andrzej Hajda <a.hajda@xxxxxxxxxxx>
- Re: [PATCH v2] i2c: exynos5: fix arbitration lost handling
- From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
- Re: [PATCH v2] i2c: exynos5: fix arbitration lost handling
- From: Andrzej Hajda <a.hajda@xxxxxxxxxxx>
- Re: [PATCH v2 03/10] i2c: meson: use i2c core for DT clock-frequency parsing
- From: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
- Re: [PATCH v2] i2c: exynos5: fix arbitration lost handling
- From: Andrzej Hajda <a.hajda@xxxxxxxxxxx>
- [PATCH v2 03/10] i2c: meson: use i2c core for DT clock-frequency parsing
- From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
- [PATCH v2 06/10] i2c: meson: remove variable count from meson_i2c_xfer
- From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
- [PATCH v2 10/10] i2c: meson: improve and simplify interrupt handler
- From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
- [PATCH v2 05/10] i2c: meson: set clock divider in probe instead of setting it for each transfer
- From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
- [PATCH v2 07/10] i2c: meson: improve interrupt handler and detect spurious interrupts
- From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
- [PATCH v2 02/10] i2c: meson: remove member irq from struct meson_i2c
- From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
- [PATCH v2 09/10] i2c: meson: remove meson_i2c_write_tokens
- From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
- [PATCH v2 08/10] i2c: meson: don't create separate token chain just for the stop command
- From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
- [PATCH v2 04/10] i2c: meson: use full 12 bits for clock divider
- From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
- [PATCH v2 01/10] i2c: meson: i2c: meson: use min instead of min_t where min_t isn't needed
- From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
- [PATCH v2 00/10] i2c: meson: series with improvements
- From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
- [RESEND PATCH v3 2/2] arm: dts: Add Mediatek MT2701 i2c device node
- From: Jun Gao <jun.gao@xxxxxxxxxxxx>
- [RESEND PATCH v3 0/2] Add i2c dt-binding and device node for Mediatek MT2701 Soc
- From: Jun Gao <jun.gao@xxxxxxxxxxxx>
- [RESEND PATCH v3 1/2] dt-bindings: i2c: Add Mediatek MT2701 i2c binding
- From: Jun Gao <jun.gao@xxxxxxxxxxxx>
- Re: [PATCH v2] i2c: exynos5: fix arbitration lost handling
- From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
- Re: [PATCH 08/12] i2c: meson: explicitly ignore messages with length zero
- From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
- Re: [PATCH 07/12] i2c: meson: improve interrupt handler and detect spurious interrupts
- From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
- Re: [PATCH 00/12] i2c: meson: series with improvements
- From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
- [PATCH 1/2] i2c: do not leave semaphore armed when copying properties fails
- From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
- [PATCH 2/2] i2c: allow attaching IRQ resources to i2c_board_info
- From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
- Re: [PATCH 00/12] i2c: meson: series with improvements
- From: Jerome Brunet <jbrunet@xxxxxxxxxxxx>
- Re: [PATCH 03/12] i2c: meson: use i2c core for DT clock-frequency parsing
- From: Jerome Brunet <jbrunet@xxxxxxxxxxxx>
- Re: [PATCH 07/12] i2c: meson: improve interrupt handler and detect spurious interrupts
- From: Jerome Brunet <jbrunet@xxxxxxxxxxxx>
- Re: [PATCH 06/12] i2c: meson: remove variable count from meson_i2c_xfer
- From: Jerome Brunet <jbrunet@xxxxxxxxxxxx>
- Re: [PATCH 02/12] i2c: meson: remove member irq from struct meson_i2c
- From: Jerome Brunet <jbrunet@xxxxxxxxxxxx>
- Re: [PATCH 01/12] i2c: meson: use min instead of min_t where min_t isn't needed
- From: Jerome Brunet <jbrunet@xxxxxxxxxxxx>
- Re: [PATCH] i2c: meson: fix wrong variable usage in meson_i2c_put_data
- From: Jerome Brunet <jbrunet@xxxxxxxxxxxx>
- Re: [PATCH 04/12] i2c: meson: use full 12 bits for clock divider
- From: Jerome Brunet <jbrunet@xxxxxxxxxxxx>
- [PATCH v2 2/2] i2c: designware: Disable pm for PMIC i2c-bus even if there is no _SEM method
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- [PATCH v2 0/2] i2c: designware: Never suspend i2c-busses used for system PMICs
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- [PATCH v2 1/2] i2c: designware: Never suspend i2c-busses used for accessing the system PMIC
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- [PATCH 09/12] i2c: meson: don't create separate token chain just for the stop command
- From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
- [PATCH 10/12] i2c: meson: remove meson_i2c_write_tokens
- From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
- [PATCH 11/12] i2c: meson: improve and simplify interrupt handler
- From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
- [PATCH 12/12] i2c: meson: use state in meson_i2c_prepare_xfer
- From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
- [PATCH 05/12] i2c: meson: set clock divider in probe instead of setting it for each transfer
- From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
- [PATCH 08/12] i2c: meson: explicitly ignore messages with length zero
- From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
- [PATCH 07/12] i2c: meson: improve interrupt handler and detect spurious interrupts
- From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
- [PATCH 06/12] i2c: meson: remove variable count from meson_i2c_xfer
- From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
- [PATCH 02/12] i2c: meson: remove member irq from struct meson_i2c
- From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
- [PATCH 04/12] i2c: meson: use full 12 bits for clock divider
- From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
- [PATCH 03/12] i2c: meson: use i2c core for DT clock-frequency parsing
- From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
- [PATCH 01/12] i2c: meson: use min instead of min_t where min_t isn't needed
- From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
- [PATCH 00/12] i2c: meson: series with improvements
- From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
- [PATCH] i2c: meson: fix wrong variable usage in meson_i2c_put_data
- From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
- Re: Linux irq subsys i2c interaction question
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- Re: Linux irq subsys i2c interaction question
- From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
- Re: [PATCH] i2c: riic: fix restart condition
- From: Simon Horman <horms@xxxxxxxxxxxx>
- Linux irq subsys i2c interaction question
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- Re: [PATCH] i2c: m65xx: drop superfluous quirk structure
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH] i2c: m65xx: drop superfluous quirk structure
- From: liguo zhang <liguo.zhang@xxxxxxxxxxxx>
- [PATCH] i2c: riic: fix restart condition
- From: Chris Brandt <chris.brandt@xxxxxxxxxxx>
- Re: [i2c-tools PATCH v2] i2ctransfer: add new tool
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
- Re: [i2c-tools PATCH v2] i2ctransfer: add new tool
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: lis3lv02d i2c access on shutdown
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [i2c-tools PATCH v2] i2ctransfer: add new tool
- From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
- Re: [PATCH] i2c: exynos5: use core helper to get driver data
- From: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
- Re: lis3lv02d i2c access on shutdown
- From: James Maki <jamescmaki@xxxxxxxxxxxxx>
- Re: [PATCH v3 resend] i2c: designware: add reset interface
- From: Ramiro Oliveira <Ramiro.Oliveira@xxxxxxxxxxxx>
- [PATCH] Documentation: devicetree: move trivial-devices out of I2C realm
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- [i2c-tools PATCH v2] i2ctransfer: add new tool
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- RE: Possible Regression caused by "[PATCH] i2c: riic: correctly finish transfers"
- From: Chris Brandt <Chris.Brandt@xxxxxxxxxxx>
- RE: [PATCH] i2c: designware: Get selected speed mode sda-hold-time via ACPI
- From: "Tan, Chin Yew" <chin.yew.tan@xxxxxxxxx>
- Possible Regression caused by "[PATCH] i2c: riic: correctly finish transfers"
- From: Simon Horman <horms@xxxxxxxxxxxx>
- Re: lis3lv02d i2c access on shutdown
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: lis3lv02d i2c access on shutdown
- From: Éric Piel <eric.piel@xxxxxxxxxxxxxxxx>
- Re: [PATCH v9 00/10] mux controller abstraction and iio/i2c muxes
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH v9 00/10] mux controller abstraction and iio/i2c muxes
- From: Peter Rosin <peda@xxxxxxxxxx>
- Re: [PATCH v9 00/10] mux controller abstraction and iio/i2c muxes
- From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v9 00/10] mux controller abstraction and iio/i2c muxes
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- [PATCH] i2c: add missing of_node_put in i2c_mux_del_adapters
- From: Qi Hou <qi.hou@xxxxxxxxxxxxx>
- Re: [PATCH v9 00/10] mux controller abstraction and iio/i2c muxes
- From: Peter Rosin <peda@xxxxxxxxxx>
- [Regression] Changes to i2c-piix4.c initialisation prevent loading of sp5100_tco watchdog driver on AMD SB800 chipset
- From: Paul Menzel <paulepanter@xxxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] i2c: add missing of_node_put in i2c_mux_del_adapters
- From: Peter Rosin <peda@xxxxxxxxxx>
- Re: [Regression] Changes to i2c-piix4.c initialisation prevent loading of sp5100_tco watchdog driver on AMD SB800 chipset
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [v2] i2c: brcmstb: Fix START and STOP conditions
- From: Kamal Dasu <kdasu.kdev@xxxxxxxxx>
- Re: [RESEND PATCH v6 3/6] i2c: designware: MASTER mode as separated driver
- From: kbuild test robot <lkp@xxxxxxxxx>
- [PATCH v3 1/2] dt-bindings: i2c: Add Mediatek MT2701 i2c binding
- From: Jun Gao <jun.gao@xxxxxxxxxxxx>
- [PATCH v3 0/2] Add i2c dt-binding and device node for Mediatek MT2701 Soc
- From: Jun Gao <jun.gao@xxxxxxxxxxxx>
- [PATCH v3 2/2] arm: dts: Add Mediatek MT2701 i2c device node
- From: Jun Gao <jun.gao@xxxxxxxxxxxx>
- [v2] i2c: brcmstb: Fix START and STOP conditions
- From: Jaedon Shin <jaedon.shin@xxxxxxxxx>
- Re: [PATCH] i2c: brcmstb: Fix START and STOP conditions
- From: Jaedon Shin <jaedon.shin@xxxxxxxxx>
- Re: [PATCH v2] i2c: designwear: Fix clk warning on suspend/resume
- From: John Stultz <john.stultz@xxxxxxxxxx>
- Re: [RESEND PATCH v6 3/6] i2c: designware: MASTER mode as separated driver
- From: kbuild test robot <lkp@xxxxxxxxx>
- [PULL] topic/designware-baytrail for 4.12 [UPDATED]
- From: Daniel Vetter <daniel.vetter@xxxxxxxx>
- Re: [PATCH] i2c: brcmstb: Fix START and STOP conditions
- From: Florian Fainelli <f.fainelli@xxxxxxxxx>
- Re: [PULL] topic/designware-baytrail for 4.12
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- Re: [PATCH] i2c: brcmstb: Fix START and STOP conditions
- From: Kamal Dasu <kamal.dasu@xxxxxxxxxxxx>
- Re: [RESEND PATCH v6 3/6] i2c: designware: MASTER mode as separated driver
- From: Luis Oliveira <Luis.Oliveira@xxxxxxxxxxxx>
- Re: [RESEND PATCH v6 3/6] i2c: designware: MASTER mode as separated driver
- From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
- Re: [RESEND PATCH v6 5/6] i2c: designware: add SLAVE mode functions
- From: Luis Oliveira <Luis.Oliveira@xxxxxxxxxxxx>
- Re: [RESEND PATCH v6 5/6] i2c: designware: add SLAVE mode functions
- From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
- Re: [PULL] topic/designware-baytrail for 4.12
- From: Daniel Vetter <daniel@xxxxxxxx>
- Re: [PULL] topic/designware-baytrail for 4.12
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- Re: [RESEND PATCH v6 2/6] i2c: designware: refactoring of the i2c-designware
- From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
- Re: [RESEND PATCH v6 4/6] i2c: designware: introducing I2C_SLAVE definitions
- From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
- [PATCH] i2c: thunderx: ACPI support for clock settings
- From: Jan Glauber <jglauber@xxxxxxxxxx>
- Re: [PULL] topic/designware-baytrail for 4.12
- From: Daniel Vetter <daniel@xxxxxxxx>
- [RESEND PATCH v6 5/6] i2c: designware: add SLAVE mode functions
- From: Luis Oliveira <Luis.Oliveira@xxxxxxxxxxxx>
- [RESEND PATCH v6 2/6] i2c: designware: refactoring of the i2c-designware
- From: Luis Oliveira <Luis.Oliveira@xxxxxxxxxxxx>
- [RESEND PATCH v6 3/6] i2c: designware: MASTER mode as separated driver
- From: Luis Oliveira <Luis.Oliveira@xxxxxxxxxxxx>
- [RESEND PATCH v6 6/6] i2c: designware: enable SLAVE in platform module
- From: Luis Oliveira <Luis.Oliveira@xxxxxxxxxxxx>
- [RESEND PATCH v6 4/6] i2c: designware: introducing I2C_SLAVE definitions
- From: Luis Oliveira <Luis.Oliveira@xxxxxxxxxxxx>
- [RESEND PATCH v6 0/6] i2c: designware: add I2C SLAVE support
- From: Luis Oliveira <Luis.Oliveira@xxxxxxxxxxxx>
- [RESEND PATCH v6 1/6] i2c: designware: Cleaning and comment style fixes.
- From: Luis Oliveira <Luis.Oliveira@xxxxxxxxxxxx>
- [PULL] topic/designware-baytrail for 4.12
- From: Daniel Vetter <daniel.vetter@xxxxxxxx>
- [PATCH v2] i2c: copy device properties when using i2c_register_board_info()
- From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
- Re: [PATCH v9 00/10] mux controller abstraction and iio/i2c muxes
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v9 00/10] mux controller abstraction and iio/i2c muxes
- From: Peter Rosin <peda@xxxxxxxxxx>
- Re: [PATCH v6 1/6] i2c: designware: Cleaning and comment style fixes.
- From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
- Re: [PATCH RFC 1/3] i2c: bcm2835: Avoid possible NULL ptr dereference
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH RFC 1/3] i2c: bcm2835: Avoid possible NULL ptr dereference
- From: Stefan Wahren <stefan.wahren@xxxxxxxx>
- [PATCH] i2c: copy device properties when using i2c_register_board_info()
- From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
- Re: [LKP] [usb] bea5b158ff WARNING: CPU: 0 PID: 25 at drivers/usb/core/urb.c:338 usb_submit_urb
- From: Fengguang Wu <fengguang.wu@xxxxxxxxx>
- Re: [LKP] [usb] bea5b158ff WARNING: CPU: 0 PID: 25 at drivers/usb/core/urb.c:338 usb_submit_urb
- From: Peter Chen <hzpeterchen@xxxxxxxxx>
- Re: [LKP] [usb] bea5b158ff WARNING: CPU: 0 PID: 25 at drivers/usb/core/urb.c:338 usb_submit_urb
- From: Ye Xiaolong <xiaolong.ye@xxxxxxxxx>
- Re: [usb] bea5b158ff WARNING: CPU: 0 PID: 25 at drivers/usb/core/urb.c:338 usb_submit_urb
- From: Ye Xiaolong <xiaolong.ye@xxxxxxxxx>
- Re: [PATCH RFC 3/3] ARM64: bcm2837-rpi: Fix pwm and i2c pin control
- From: Eric Anholt <eric@xxxxxxxxxx>
- Re: [PATCH RFC 3/3] ARM64: bcm2837-rpi: Fix pwm and i2c pin control
- From: Stefan Wahren <stefan.wahren@xxxxxxxx>
- Re: [PATCH RFC 3/3] ARM64: bcm2837-rpi: Fix pwm and i2c pin control
- From: Eric Anholt <eric@xxxxxxxxxx>
- [PATCH] i2c: m65xx: drop superfluous quirk structure
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH v2 1/2] Documentation: devicetree: Add i2c binding for mediatek MT2701 Soc Platform
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v2 1/2] Documentation: devicetree: Add i2c binding for mediatek MT2701 Soc Platform
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v6 4/6] i2c: designware: introducing I2C_SLAVE definitions
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH 1/2] i2c: designware: Never suspend i2c-busses used for accessing the system PMIC
- From: Takashi Iwai <tiwai@xxxxxxx>
- Re: [PATCH 1/2] i2c: designware: Never suspend i2c-busses used for accessing the system PMIC
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- Re: [PATCH 1/2] i2c: designware: Never suspend i2c-busses used for accessing the system PMIC
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH 1/2] i2c: designware: Never suspend i2c-busses used for accessing the system PMIC
- From: Takashi Iwai <tiwai@xxxxxxx>
- [PATCH 1/2] i2c: designware: Never suspend i2c-busses used for accessing the system PMIC
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- [PATCH 0/2] i2c: designware: PM fixes for i2c-bus used by system PMIC
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- [PATCH 2/2] i2c: designware: Disable pm for PMIC i2c-bus even if there is no _SEM method
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- Re: [usb] bea5b158ff WARNING: CPU: 0 PID: 25 at drivers/usb/core/urb.c:338 usb_submit_urb
- From: Peter Chen <hzpeterchen@xxxxxxxxx>
- [RESEND PATCH] i2c/busses/pasemi: Remove hardcoded bus numbers on smbus
- From: Darren Stevens <darren@xxxxxxxxxxxxxxxx>
- Re: [Intel-gfx] [PATCH v3 12/12] drm/i915: Listen for PMIC bus access notifications
- From: Daniel Vetter <daniel@xxxxxxxx>
- [usb] bea5b158ff WARNING: CPU: 0 PID: 25 at drivers/usb/core/urb.c:338 usb_submit_urb
- From: Fengguang Wu <fengguang.wu@xxxxxxxxx>
- [usb] bea5b158ff WARNING: CPU: 0 PID: 25 at drivers/usb/core/urb.c:338 usb_submit_urb
- From: Fengguang Wu <fengguang.wu@xxxxxxxxx>
- [PULL REQUEST] i2c for 4.11
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- [PATCH] i2c: exynos5: use core helper to get driver data
- From: Andrzej Hajda <a.hajda@xxxxxxxxxxx>
- [PATCH 2/2] i2c: exynos5: de-duplicate error logs on clock setup
- From: Andrzej Hajda <a.hajda@xxxxxxxxxxx>
- [PATCH 1/2] i2c: exynos5: simplify clock frequency handling
- From: Andrzej Hajda <a.hajda@xxxxxxxxxxx>
- [PATCH v4 12/12] drm/i915: Listen for PMIC bus access notifications
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- [PATCH v4 11/12] drm/i915: Add intel_uncore_suspend / resume functions
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- [PATCH v4 08/12] i2c: designware-baytrail: Add support for cherrytrail
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- [PATCH v4 10/12] i2c: designware-baytrail: Call pmic_bus_access_notifier_chain
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- [PATCH v4 09/12] i2c: designware-baytrail: Acquire P-Unit access on bus acquire
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- [PATCH v4 07/12] i2c: designware-baytrail: Fix race when resetting the semaphore
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- [PATCH v4 06/12] i2c: designware-baytrail: Disallow the CPU to enter C6 or C7 while holding the punit semaphore
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- [PATCH v4 05/12] i2c: designware-baytrail: Only check iosf_mbi_available() for shared hosts
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- [PATCH v4 04/12] i2c: designware-baytrail: Pass dw_i2c_dev into helper functions
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- [PATCH v4 03/12] i2c: designware: Rename accessor_flags to flags
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- [PATCH v4 02/12] x86/platform/intel/iosf_mbi: Add a PMIC bus access notifier
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- [PATCH v4 01/12] x86/platform/intel/iosf_mbi: Add a mutex for P-Unit access
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- [PATCH v4 00/12] coordinate cht i2c-pmic and i915-punit accesses
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- [PATCH] i2c: exynos5: simplify timings calculation
- From: Andrzej Hajda <a.hajda@xxxxxxxxxxx>
- Re: [PATCH v3 2/2] i2c: Add Tegra BPMP I2C proxy driver
- From: Thierry Reding <thierry.reding@xxxxxxxxx>
- Re: [PATCH v2] i2c: exynos5: fix arbitration lost handling
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH v2] i2c: exynos5: disable fifo-almost-empty irq signal when necessary
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH] i2c: thunderx: Replace pci_enable_msix()
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH v2] i2c: exynos5: fix arbitration lost handling
- From: Andrzej Hajda <a.hajda@xxxxxxxxxxx>
- Re: [PATCH v2] i2c: exynos5: disable fifo-almost-empty irq signal when necessary
- From: Andi Shyti <andi.shyti@xxxxxxxxxxx>
- Re: [PATCH v2] i2c: exynos5: fix arbitration lost handling
- From: Andi Shyti <andi.shyti@xxxxxxxxxxx>
- Re: [PATCH v8 3/3] i2c: zx2967: add i2c controller driver for ZTE's zx2967 family
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH v2] i2c: exynos5: disable fifo-almost-empty irq signal when necessary
- From: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
- [PATCH v2] i2c: exynos5: fix arbitration lost handling
- From: Andrzej Hajda <a.hajda@xxxxxxxxxxx>
- [PATCH v2] i2c: exynos5: disable fifo-almost-empty irq signal when necessary
- From: Andrzej Hajda <a.hajda@xxxxxxxxxxx>
- [PATCH v8 3/3] i2c: zx2967: add i2c controller driver for ZTE's zx2967 family
- From: Baoyou Xie <baoyou.xie@xxxxxxxxxx>
- [PATCH v8 2/3] MAINTAINERS: add zx2967 i2c controller driver to ARM ZTE architecture
- From: Baoyou Xie <baoyou.xie@xxxxxxxxxx>
- [PATCH v8 1/3] dt: bindings: add documentation for zx2967 family i2c controller
- From: Baoyou Xie <baoyou.xie@xxxxxxxxxx>
- [PATCH] i2c: exynos5: disable fifo-almost-empty irq signal when necessary
- From: Andrzej Hajda <a.hajda@xxxxxxxxxxx>
- Re: [PATCH RFC 1/3] i2c: bcm2835: Avoid possible NULL ptr dereference
- From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v7 3/3] i2c: zx2967: add i2c controller driver for ZTE's zx2967 family
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH RFC 1/3] i2c: bcm2835: Avoid possible NULL ptr dereference
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH RFC 1/3] i2c: bcm2835: Avoid possible NULL ptr dereference
- From: Stefan Wahren <stefan.wahren@xxxxxxxx>
- Re: [PATCH RFC 1/3] i2c: bcm2835: Avoid possible NULL ptr dereference
- From: Stefan Wahren <stefan.wahren@xxxxxxxx>
- Re: [PATCH RFC 1/3] i2c: bcm2835: Avoid possible NULL ptr dereference
- From: Michael Zoran <mzoran@xxxxxxxxxxxx>
- [PATCH] i2c: thunderx: Replace pci_enable_msix()
- From: Jan Glauber <jglauber@xxxxxxxxxx>
- Re: [PATCH RFC 1/3] i2c: bcm2835: Avoid possible NULL ptr dereference
- From: kernel@xxxxxxxxxxxxxxxx
- Re: [PATCH RFC 1/3] i2c: bcm2835: Avoid possible NULL ptr dereference
- From: Stefan Wahren <stefan.wahren@xxxxxxxx>
- Re: [PATCH RFC 1/3] i2c: bcm2835: Avoid possible NULL ptr dereference
- From: Noralf Trønnes <noralf@xxxxxxxxxxx>
- Re: [PATCH RFC 1/3] i2c: bcm2835: Avoid possible NULL ptr dereference
- From: Stefan Wahren <stefan.wahren@xxxxxxxx>
- Re: lis3lv02d i2c access on shutdown
- From: James Maki <jamescmaki@xxxxxxxxxxxxx>
- Re: [PATCH v2] i2c: at91: ensure state is restored after suspending
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH RFC 1/3] i2c: bcm2835: Avoid possible NULL ptr dereference
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH v3 2/2] i2c: Add Tegra BPMP I2C proxy driver
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH v3 1/2] dt-bindings: Add Tegra186 BPMP I2C binding
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- [PATCH v3 2/2] i2c: Add Tegra BPMP I2C proxy driver
- From: Thierry Reding <thierry.reding@xxxxxxxxx>
- [PATCH v3 1/2] dt-bindings: Add Tegra186 BPMP I2C binding
- From: Thierry Reding <thierry.reding@xxxxxxxxx>
- Re: [PATCH v3 12/12] drm/i915: Listen for PMIC bus access notifications
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- Re: [PATCH RFC 1/3] i2c: bcm2835: Avoid possible NULL ptr dereference
- From: Noralf Trønnes <noralf@xxxxxxxxxxx>
- lis3lv02d i2c access on shutdown
- From: James Maki <jamescmaki@xxxxxxxxxxxxx>
- Re: [PATCH v7 3/3] i2c: zx2967: add i2c controller driver for ZTE's zx2967 family
- From: Jun Nie <jun.nie@xxxxxxxxxx>
- [PULL REQUEST] i2c for 4.10
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH v2] i2c: at91: ensure state is restored after suspending
- From: Ludovic Desroches <ludovic.desroches@xxxxxxxxxxxxx>
- [PATCH RFC 0/3] ARM64: bcm2837-rpi: Fix random crashes caused by i2c
- From: Stefan Wahren <stefan.wahren@xxxxxxxx>
- [PATCH RFC 2/3] ARM64: bcm2837-rpi: remove link to bcm2835-rpi.dtsi
- From: Stefan Wahren <stefan.wahren@xxxxxxxx>
- [PATCH RFC 3/3] ARM64: bcm2837-rpi: Fix pwm and i2c pin control
- From: Stefan Wahren <stefan.wahren@xxxxxxxx>
- [PATCH RFC 1/3] i2c: bcm2835: Avoid possible NULL ptr dereference
- From: Stefan Wahren <stefan.wahren@xxxxxxxx>
- Re: [PATCH v3 12/12] drm/i915: Listen for PMIC bus access notifications
- From: Jani Nikula <jani.nikula@xxxxxxxxxxxxxxx>
- Re: [PATCH v3 12/12] drm/i915: Listen for PMIC bus access notifications
- From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
- [PATCH v2] i2c: at91: ensure state is restored after suspending
- From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH] i2c: at91: ensure state is restored after suspending
- From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx>
- [PATCH v7 2/3] MAINTAINERS: add zx2967 i2c controller driver to ARM ZTE architecture
- From: Baoyou Xie <baoyou.xie@xxxxxxxxxx>
- [PATCH v7 3/3] i2c: zx2967: add i2c controller driver for ZTE's zx2967 family
- From: Baoyou Xie <baoyou.xie@xxxxxxxxxx>
- [PATCH v7 1/3] dt: bindings: add documentation for zx2967 family i2c controller
- From: Baoyou Xie <baoyou.xie@xxxxxxxxxx>
- Re: [PATCH v9 09/10] dt-bindings: mux-adg792a: document devicetree bindings for ADG792A/G mux
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v9 07/10] dt-bindings: i2c: i2c-mux: document general purpose i2c-mux bindings
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v6 1/6] i2c: designware: Cleaning and comment style fixes.
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- [PATCH v6 0/6] i2c: designware: add I2C SLAVE support
- From: Luis Oliveira <Luis.Oliveira@xxxxxxxxxxxx>
- [PATCH v6 2/6] i2c: designware: refactoring of the i2c-designware
- From: Luis Oliveira <Luis.Oliveira@xxxxxxxxxxxx>
- [PATCH v6 5/6] i2c: designware: add SLAVE mode functions
- From: Luis Oliveira <Luis.Oliveira@xxxxxxxxxxxx>
- [PATCH v6 3/6] i2c: designware: MASTER mode as separated driver
- From: Luis Oliveira <Luis.Oliveira@xxxxxxxxxxxx>
- [PATCH v6 4/6] i2c: designware: introducing I2C_SLAVE definitions
- From: Luis Oliveira <Luis.Oliveira@xxxxxxxxxxxx>
- [PATCH v6 6/6] i2c: designware: enable SLAVE in platform module
- From: Luis Oliveira <Luis.Oliveira@xxxxxxxxxxxx>
- [PATCH v6 1/6] i2c: designware: Cleaning and comment style fixes.
- From: Luis Oliveira <Luis.Oliveira@xxxxxxxxxxxx>
- [PATCH v2 0/2] Add i2c DT binding and device node for Mediatek MT2701 Soc
- From: Jun Gao <jun.gao@xxxxxxxxxxxx>
- [PATCH v2 2/2] arm: dts: mt2701: Add i2c device node
- From: Jun Gao <jun.gao@xxxxxxxxxxxx>
- [PATCH v2 1/2] Documentation: devicetree: Add i2c binding for mediatek MT2701 Soc Platform
- From: Jun Gao <jun.gao@xxxxxxxxxxxx>
- Re: [PATCH] Revert "i2c: designware: detect when dynamic tar update is possible"
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH] Revert "i2c: designware: detect when dynamic tar update is possible"
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH v2] i2c: designwear: Fix clk warning on suspend/resume
- From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
- Re: [PATCH] i2c: designware: Get selected speed mode sda-hold-time via ACPI
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- Re: [PATCH v6 3/3] i2c: zx2967: add i2c controller driver for ZTE's zx2967 family
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
- Re: [RFC PATCH] i2c:mux: Driver for PCA9641 I2C Master Arbiter
- From: Guenter Roeck <linux@xxxxxxxxxxxx>
- Re: [PATCH] i2c: designware: Get selected speed mode sda-hold-time via ACPI
- From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
- [PATCH] i2c: designware: Get selected speed mode sda-hold-time via ACPI
- From: chin.yew.tan@xxxxxxxxx
- [PATCH v2] Set sda-hold-time based on ACPI *CNT value
- From: chin.yew.tan@xxxxxxxxx
- [PATCH v2] i2c: designwear: Fix clk warning on suspend/resume
- From: John Stultz <john.stultz@xxxxxxxxxx>
- Re: [PATCH v6 3/3] i2c: zx2967: add i2c controller driver for ZTE's zx2967 family
- From: Jun Nie <jun.nie@xxxxxxxxxx>
- Re: [PATCH] Revert "i2c: designware: detect when dynamic tar update is possible"
- From: "De Marchi, Lucas" <lucas.demarchi@xxxxxxxxx>
- Re: [PATCH] i2c: designware: Get selected speed mode sda-hold-time via ACPI
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- Re: [PATCH v6 3/3] i2c: zx2967: add i2c controller driver for ZTE's zx2967 family
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
- Re: [PATCH] i2c: designware: Get selected speed mode sda-hold-time via ACPI
- From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
- [PATCH] Revert "i2c: designware: detect when dynamic tar update is possible"
- From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
- RE: [PATCH] i2c: designware: Get selected speed mode sda-hold-time via ACPI
- From: "Tan, Chin Yew" <chin.yew.tan@xxxxxxxxx>
- RE: [PATCH] i2c: designware: Fix regression when dynamic TAR update is disabled
- From: "Shah, Nehal-bakulchandra" <Nehal-bakulchandra.Shah@xxxxxxx>
- Re: [PATCH v6 0/3] i2c: mux: pca954x: Add interrupt controller support
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH v6 0/3] i2c: mux: pca954x: Add interrupt controller support
- From: Peter Rosin <peda@xxxxxxxxxx>
- Re: [PATCH v2 2/2] i2c: Add Tegra BPMP I2C proxy driver
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH] i2c: exynos5: fix arbitration lost handling
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- [PULL REQUEST] i2c for 4.10
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH v4] eeprom/at24: use device_property_*() functions instead of of_get_property()
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH] i2c: designware: Get selected speed mode sda-hold-time via ACPI
- From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
- Re: [PATCH] i2c: designware: Get selected speed mode sda-hold-time via ACPI
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- Re: [RFC PATCH] i2c:mux: Driver for PCA9641 I2C Master Arbiter
- From: Peter Rosin <peda@xxxxxxxxxx>
- Re: [PATCH v6 0/3] i2c: mux: pca954x: Add interrupt controller support
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- [PATCH] i2c: designware: Get selected speed mode sda-hold-time via ACPI
- From: chin.yew.tan@xxxxxxxxx
- [PATCH] Set sda-hold-time based on ACPI *CNT value
- From: chin.yew.tan@xxxxxxxxx
- [PATCH] Set sda-hold-time based on ACPI *CNT value
- From: chin.yew.tan@xxxxxxxxx
- Re: [PATCH] i2c: exynos5: fix arbitration lost handling
- From: Andrzej Hajda <a.hajda@xxxxxxxxxxx>
- Re: [PATCH] i2c: designware: Fix regression when dynamic TAR update is disabled
- From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
- [RFC PATCH] i2c:mux: Driver for PCA9641 I2C Master Arbiter
- From: Vidya Sagar Ravipati <vidya@xxxxxxxxxxxxxxxxxxx>
- [PATCH v3 02/12] x86/platform/intel/iosf_mbi: Add a PMIC bus access notifier
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- [PATCH v3 08/12] i2c: designware-baytrail: Add support for cherrytrail
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- [PATCH v3 09/12] i2c: designware-baytrail: Acquire P-Unit access on bus acquire
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- [PATCH v3 05/12] i2c: designware-baytrail: Only check iosf_mbi_available() for shared hosts
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- [PATCH v3 10/12] i2c: designware-baytrail: Call pmic_bus_access_notifier_chain
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- [PATCH v3 11/12] drm/i915: Add intel_uncore_suspend / resume functions
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- [PATCH v3 04/12] i2c: designware-baytrail: Pass dw_i2c_dev into helper functions
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- [PATCH v3 12/12] drm/i915: Listen for PMIC bus access notifications
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- [PATCH v3 06/12] i2c: designware-baytrail: Disallow the CPU to enter C6 or C7 while holding the punit semaphore
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- [PATCH v3 07/12] i2c: designware-baytrail: Fix race when resetting the semaphore
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- [PATCH v3 03/12] i2c: designware: Rename accessor_flags to flags
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- [PATCH v3 01/12] x86/platform/intel/iosf_mbi: Add a mutex for P-Unit access
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- [PATCH v3 00/12] coordinate cht i2c-pmic and i915-punit accesses
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- Re: [PATCH v2 13/13] drm/i915: Acquire P-Unit access when modifying P-Unit settings
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- Re: [PATCH v6 0/3] i2c: mux: pca954x: Add interrupt controller support
- From: Peter Rosin <peda@xxxxxxxxxx>
- Re: [PATCH] i2c: exynos5: fix arbitration lost handling
- From: Andrzej Hajda <a.hajda@xxxxxxxxxxx>
- Re: [PATCH] i2c: designware: Fix regression when dynamic TAR update is disabled
- From: Suravee Suthikulpanit <Suravee.Suthikulpanit@xxxxxxx>
- Re: [PATCH 1/3] of: fix of_node leak caused in of_find_node_opts_by_path
- From: qhou <qi.hou@xxxxxxxxxxxxx>
- Re: [PATCH v2] eeprom/at24: use device_property_*() functions instead of of_get_property()
- From: kbuild test robot <lkp@xxxxxxxxx>
- Re: [PATCH v4] eeprom/at24: use device_property_*() functions instead of of_get_property()
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH] i2c: designware: Fix regression when dynamic TAR update is disabled
- From: "De Marchi, Lucas" <lucas.demarchi@xxxxxxxxx>
- Re: [PATCH v2] eeprom/at24: use device_property_*() functions instead of of_get_property()
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
- Re: [PATCH v2] eeprom/at24: use device_property_*() functions instead of of_get_property()
- From: kbuild test robot <lkp@xxxxxxxxx>
- Re: [PATCH v4] eeprom/at24: use device_property_*() functions instead of of_get_property()
- From: Ben Gardner <gardner.ben@xxxxxxxxx>
- [PATCH] i2c: designware: Fix regression when dynamic TAR update is disabled
- From: Shah Nehal-Bakulchandra <Nehal-Bakulchandra.Shah@xxxxxxx>
- Re: [PATCH] i2c: designware: Fix regression when dynamic TAR update is disabled
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- Re: [PATCH] i2c: piix4: Request the SMBUS semaphore inside the mutex
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH v2] eeprom/at24: use device_property_*() functions instead of of_get_property()
- From: Ben Gardner <gardner.ben@xxxxxxxxx>
- Re: [PATCH v4] eeprom/at24: use device_property_*() functions instead of of_get_property()
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
- [PATCH v4] eeprom/at24: use device_property_*() functions instead of of_get_property()
- From: Ben Gardner <gardner.ben@xxxxxxxxx>
- Re: [PATCH] i2c: piix4: Request the SMBUS semaphore inside the mutex
- From: Jean Delvare <jdelvare@xxxxxxx>
- Re: [PATCH v3] eeprom/at24: use device_property_*() functions instead of of_get_property()
- From: Ben Gardner <gardner.ben@xxxxxxxxx>
- [PATCH v3] eeprom/at24: use device_property_*() functions instead of of_get_property()
- From: Ben Gardner <gardner.ben@xxxxxxxxx>
- Re: [PATCH] i2c: riic: correctly finish transfers
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH v2] i2c: i801: Add support for Intel Gemini Lake
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH v6 3/3] i2c: mux: pca954x: Add interrupt controller support
- From: Peter Rosin <peda@xxxxxxxxxx>
- Re: [PATCH -next] i2c: mux: mlxcpld: remove unused including <linux/version.h>
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH] I2c: busses - Fix possible NULL derefrence.
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [RESEND PATCH 1/2] Documentation: devicetree: Add i2c binding for mediatek MT2701 Soc Platform
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH] i2c: exynos5: fix arbitration lost handling
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH v2] eeprom/at24: use device_property_*() functions instead of of_get_property()
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
- Re: [PATCH] i2c: busses: constify i2c_algorithm structures
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH] i2c: piix4: Request the SMBUS semaphore inside the mutex
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH] i2c: piix4: Request the SMBUS semaphore inside the mutex
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH] i2c: piix4: Fix request_region size
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- [PATCH v2] eeprom/at24: use device_property_*() functions instead of of_get_property()
- From: Ben Gardner <gardner.ben@xxxxxxxxx>
- Re: [PATCH] i2c: i2c-mux-gpio: rename i2c-gpio-mux to i2c-mux-gpio
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH] eeprom/at24: use device_property_*() functions instead of of_get_property()
- From: Ben Gardner <gardner.ben@xxxxxxxxx>
- Re: [PATCH 1/3] of: fix of_node leak caused in of_find_node_opts_by_path
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v6 0/3] Init device ids from ACPI of_compatible
- From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
- [PATCH v6 1/3] dt: bindings: add documentation for zx2967 family i2c controller
- From: Baoyou Xie <baoyou.xie@xxxxxxxxxx>
- [PATCH v6 2/3] MAINTAINERS: add zx2967 i2c controller driver to ARM ZTE architecture
- From: Baoyou Xie <baoyou.xie@xxxxxxxxxx>
- [PATCH v6 3/3] i2c: zx2967: add i2c controller driver for ZTE's zx2967 family
- From: Baoyou Xie <baoyou.xie@xxxxxxxxxx>
- Re: SMBus not found
- From: Jean Delvare <jdelvare@xxxxxxx>
- Re: [PATCH] eeprom/at24: use device_property_*() functions instead of of_get_property()
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
- [PATCH] eeprom/at24: use device_property_*() functions instead of of_get_property()
- From: Ben Gardner <gardner.ben@xxxxxxxxx>
- Re: [PATCH v5 3/3] i2c: zx2967: add i2c controller driver for ZTE's zx2967 family
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
- [PATCH v9 10/10] mux: adg792a: add mux controller driver for ADG792A/G
- From: Peter Rosin <peda@xxxxxxxxxx>
- [PATCH v9 06/10] iio: multiplexer: new iio category and iio-mux driver
- From: Peter Rosin <peda@xxxxxxxxxx>
- [PATCH v9 09/10] dt-bindings: mux-adg792a: document devicetree bindings for ADG792A/G mux
- From: Peter Rosin <peda@xxxxxxxxxx>
- [PATCH v9 05/10] dt-bindings: iio: io-channel-mux: document io-channel-mux bindings
- From: Peter Rosin <peda@xxxxxxxxxx>
- [PATCH v9 04/10] iio: inkern: api for manipulating ext_info of iio channels
- From: Peter Rosin <peda@xxxxxxxxxx>
- [PATCH v9 07/10] dt-bindings: i2c: i2c-mux: document general purpose i2c-mux bindings
- From: Peter Rosin <peda@xxxxxxxxxx>
- [PATCH v9 08/10] i2c: i2c-mux-gpmux: new driver
- From: Peter Rosin <peda@xxxxxxxxxx>
- [PATCH v9 03/10] mux: minimal mux subsystem and gpio-based mux controller
- From: Peter Rosin <peda@xxxxxxxxxx>
- [PATCH v9 02/10] dt-bindings: document devicetree bindings for mux-controllers and gpio-mux
- From: Peter Rosin <peda@xxxxxxxxxx>
- [PATCH v9 01/10] devres: trivial whitespace fix
- From: Peter Rosin <peda@xxxxxxxxxx>
- [PATCH v9 00/10] mux controller abstraction and iio/i2c muxes
- From: Peter Rosin <peda@xxxxxxxxxx>
- [PATCH v5 3/3] i2c: zx2967: add i2c controller driver for ZTE's zx2967 family
- From: Baoyou Xie <baoyou.xie@xxxxxxxxxx>
- [PATCH v5 2/3] MAINTAINERS: add zx2967 i2c controller driver to ARM ZTE architecture
- From: Baoyou Xie <baoyou.xie@xxxxxxxxxx>
- [PATCH v5 1/3] dt: bindings: add documentation for zx2967 family i2c controller
- From: Baoyou Xie <baoyou.xie@xxxxxxxxxx>
- [PATCH] i2c: riic: correctly finish transfers
- From: Chris Brandt <chris.brandt@xxxxxxxxxxx>
- [PATCH] i2c: i2c-mux-gpio: rename i2c-gpio-mux to i2c-mux-gpio
- From: Peter Rosin <peda@xxxxxxxxxx>
- Re: [PATCH 2/2] dt-bindings: move trivial devices out of i2c subdir
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH 2/2] dt-bindings: move trivial devices out of i2c subdir
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH v4 3/3] i2c: zx2967: add i2c controller driver for ZTE's zx2967 family
- From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
- Re: [PATCH v4 3/3] i2c: zx2967: add i2c controller driver for ZTE's zx2967 family
- From: Shawn Guo <shawnguo@xxxxxxxxxx>
- Re: [PATCH v8 07/12] dt-bindings: i2c: i2c-mux-simple: document i2c-mux-simple bindings
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v6 3/3] spi: acpi: Initialize modalias from of_compatible
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH] i2c: busses: constify i2c_algorithm structures
- From: Ludovic Desroches <ludovic.desroches@xxxxxxxxxxxxx>
- Re: [PATCH] i2c: at91: ensure state is restored after suspending
- From: Ludovic Desroches <ludovic.desroches@xxxxxxxxxxxxx>
- Re: [PATCH] i2c: designwear: Fix clk warning on suspend/resume
- From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
- [PATCH 1/3] of: fix of_node leak caused in of_find_node_opts_by_path
- From: Qi Hou <qi.hou@xxxxxxxxxxxxx>
- [PATCH v4 3/3] i2c: zx2967: add i2c controller driver for ZTE's zx2967 family
- From: Baoyou Xie <baoyou.xie@xxxxxxxxxx>
- [PATCH v4 2/3] MAINTAINERS: add zx2967 i2c controller driver to ARM ZTE architecture
- From: Baoyou Xie <baoyou.xie@xxxxxxxxxx>
- [PATCH v4 1/3] dt: bindings: add documentation for zx2967 family i2c controller
- From: Baoyou Xie <baoyou.xie@xxxxxxxxxx>
- [PATCH v6 0/3] Init device ids from ACPI of_compatible
- From: "Dan O'Donovan" <dan@xxxxxxxxxx>
- [PATCH v6 1/3] ACPI / bus: Export acpi_of_modalias equiv of of_modalias_node
- From: "Dan O'Donovan" <dan@xxxxxxxxxx>
- [PATCH v6 2/3] i2c: acpi: Initialize info.type from of_compatible
- From: "Dan O'Donovan" <dan@xxxxxxxxxx>
- [PATCH v6 3/3] spi: acpi: Initialize modalias from of_compatible
- From: "Dan O'Donovan" <dan@xxxxxxxxxx>
- Re: [PATCH v5 3/3] spi: acpi: Initialize modalias from of_compatible
- From: Mark Brown <broonie@xxxxxxxxxx>
- [PATCH v5 1/3] ACPI / bus: Export acpi_of_modalias equiv of of_modalias_node
- From: "Dan O'Donovan" <dan@xxxxxxxxxx>
- [PATCH v5 0/3] Init device ids from ACPI of_compatible
- From: "Dan O'Donovan" <dan@xxxxxxxxxx>
- [PATCH v5 2/3] i2c: acpi: Initialize info.type from of_compatible
- From: "Dan O'Donovan" <dan@xxxxxxxxxx>
- [PATCH v5 3/3] spi: acpi: Initialize modalias from of_compatible
- From: "Dan O'Donovan" <dan@xxxxxxxxxx>
- Re: [PATCH v3 3/3] i2c: zx2967: add i2c controller driver for ZTE's zx2967 family
- From: Shawn Guo <shawnguo@xxxxxxxxxx>
- Re: SMBus not found
- From: Hrvoje T <hrvooje@xxxxxxxxxxxx>
- [PATCH] i2c: designwear: Fix clk warning on suspend/resume
- From: John Stultz <john.stultz@xxxxxxxxxx>
- Re: [PATCH] i2c: piix4: Request the SMBUS semaphore inside the mutex
- From: Jean Delvare <jdelvare@xxxxxxx>
- Re: SMBus not found
- From: Jean Delvare <jdelvare@xxxxxxx>
- Re: [PATCH v8 07/12] dt-bindings: i2c: i2c-mux-simple: document i2c-mux-simple bindings
- From: Peter Rosin <peda@xxxxxxxxxx>
- [PATCH] i2c: piix4: Request the SMBUS semaphore inside the mutex
- From: Ricardo Ribalda Delgado <ricardo.ribalda@xxxxxxxxx>
- Re: [PATCH v8 07/12] dt-bindings: i2c: i2c-mux-simple: document i2c-mux-simple bindings
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v4 1/3] ACPI / bus: Export acpi_of_modalias equiv of of_modalias_node
- From: "Dan O'Donovan" <dan@xxxxxxxxxx>
- Re: [PATCH v4 1/3] ACPI / bus: Export acpi_of_modalias equiv of of_modalias_node
- From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
- Re: [PATCH 2/2] dt-bindings: move trivial devices out of i2c subdir
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH v4 3/3] spi: acpi: Initialize modalias from of_compatible
- From: Mark Brown <broonie@xxxxxxxxxx>
- [PATCH v2] i2c: i801: Add support for Intel Gemini Lake
- From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
- Re: [PATCH 2/2] dt-bindings: move trivial devices out of i2c subdir
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH 1/2] dt-bindings: deprecate trivial-devices.txt for i2c
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH] i2c: i801: Add support for Intel Gemini Lake
- From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
- Re: [PATCH] i2c: i801: Add support for Intel Gemini Lake
- From: Jean Delvare <jdelvare@xxxxxxx>
- Re: [PATCH v3 3/3] spi: acpi: Initialize modalias from of_compatible
- From: "Rafael J. Wysocki" <rafael@xxxxxxxxxx>
- Re: [PATCH v3 3/3] spi: acpi: Initialize modalias from of_compatible
- From: Mark Brown <broonie@xxxxxxxxxx>
- Re: [PATCH v4 00/14] ARM: dts: r8a779x: use demuxer for I2C
- From: Niklas Söderlund <niklas.soderlund@xxxxxxxxxxxx>
- Re: [PATCH] i2c: busses: constify i2c_algorithm structures
- From: Jean Delvare <jdelvare@xxxxxxx>
- Re: [PATCH v3] i2c: piix4: Avoid race conditions with IMC
- From: Jean Delvare <jdelvare@xxxxxxx>
- Re: [PATCH] i2c: piix4: Fix request_region size
- From: Jean Delvare <jdelvare@xxxxxxx>
- [PATCH] i2c: i801: Add support for Intel Gemini Lake
- From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
- Re: Issue with i2c-designware-platdrv's suspend/runtime-suspend handling
- From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
- Re: [PATCH v8 07/12] dt-bindings: i2c: i2c-mux-simple: document i2c-mux-simple bindings
- From: Peter Rosin <peda@xxxxxxxxxx>
- [RFC/PATCH 4/4] dtc: Add /expansion/ support
- From: Stephen Boyd <stephen.boyd@xxxxxxxxxx>
- [RFC/PATCH 1/4] Start moving overlay handling from parser into dtc core
- From: Stephen Boyd <stephen.boyd@xxxxxxxxxx>
- [RFC/PATCH 2/4] dtc: Add syntactic sugar version of overlays
- From: Stephen Boyd <stephen.boyd@xxxxxxxxxx>
- [RFC/PATCH 3/4] tests: Add a test for overlays syntactic sugar
- From: Stephen Boyd <stephen.boyd@xxxxxxxxxx>
- [RFC/PATCH 0/4] New style overlay and /expansion/ support
- From: Stephen Boyd <stephen.boyd@xxxxxxxxxx>
- Re: Issue with i2c-designware-platdrv's suspend/runtime-suspend handling
- From: John Stultz <john.stultz@xxxxxxxxxx>
- Re: [PATCH] i2c: at91: ensure state is restored after suspending
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- [PATCH] i2c: at91: ensure state is restored after suspending
- From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH v8 07/12] dt-bindings: i2c: i2c-mux-simple: document i2c-mux-simple bindings
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v2 13/13] drm/i915: Acquire P-Unit access when modifying P-Unit settings
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- Re: [PATCH v2 13/13] drm/i915: Acquire P-Unit access when modifying P-Unit settings
- From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
- Re: [PATCH v2 13/13] drm/i915: Acquire P-Unit access when modifying P-Unit settings
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- Re: [PATCH v2 13/13] drm/i915: Acquire P-Unit access when modifying P-Unit settings
- From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
- Re: [PATCH v2 13/13] drm/i915: Acquire P-Unit access when modifying P-Unit settings
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- Re: [PATCH v2 13/13] drm/i915: Acquire P-Unit access when modifying P-Unit settings
- From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
- Re: [PATCH] I2c: busses - Fix possible NULL derefrence.
- From: Thierry Reding <thierry.reding@xxxxxxxxx>
- Re: [PATCH] I2c: busses - Fix possible NULL derefrence.
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
- Re: [PATCH] i2c: busses: constify i2c_algorithm structures
- From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
- Re: [PATCH] i2c: busses: constify i2c_algorithm structures
- From: Patrice CHOTARD <patrice.chotard@xxxxxx>
- Re: [PATCH v3 3/3] spi: acpi: Initialize modalias from of_compatible
- From: "Rafael J. Wysocki" <rafael@xxxxxxxxxx>
- Re: [PATCH] I2c: busses - Fix possible NULL derefrence.
- From: Thierry Reding <thierry.reding@xxxxxxxxx>
- Re: [PATCH] I2c: busses - Fix possible NULL derefrence.
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
- Re: [PATCH v8 12/12] mux: support simplified bindings for single-user gpio mux
- From: Peter Rosin <peda@xxxxxxxxxx>
- Re: [PATCH] I2c: busses - Fix possible NULL derefrence.
- From: Thierry Reding <thierry.reding@xxxxxxxxx>
- Re: [PATCH v2 1/2] dt-bindings: Add Tegra186 BPMP I2C binding
- From: Thierry Reding <thierry.reding@xxxxxxxxx>
- Re: [PATCH v2 1/2] dt-bindings: Add Tegra186 BPMP I2C binding
- From: Thierry Reding <thierry.reding@xxxxxxxxx>
- [PATCH] I2c: busses - Fix possible NULL derefrence.
- From: Shailendra Verma <shailendra.v@xxxxxxxxxxx>
- Re: [PATCH] i2c: piix4: Fix request_region size
- From: Ricardo Ribalda Delgado <ricardo.ribalda@xxxxxxxxx>
- Re: [PATCH] i2c: busses: constify i2c_algorithm structures
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
- Re: [PATCH v8 07/12] dt-bindings: i2c: i2c-mux-simple: document i2c-mux-simple bindings
- From: Peter Rosin <peda@xxxxxxxxxx>
- [PULL REQUEST] i2c for 4.10
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH i2c/for-next] i2c: sh_mobile: document support for r8a7796 (R-Car M3-W)
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH v4 2/3] i2c: acpi: Initialize info.type from of_compatible
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [v3] i2c: i2c-cros-ec-tunnel: Reduce logging noise
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH v4] i2c: core: helper function to detect slave mode
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH v2 12/13] drm/i915: Listen for PMIC bus access notifications
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- Re: [PATCH v2 13/13] drm/i915: Acquire P-Unit access when modifying P-Unit settings
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- Re: [PATCH v4 3/3] iio: distance: srf08: add driver ABI documentation
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v4 2/3] iio: distance: srf08: add IIO driver for us ranger
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v4 1/3] iio: distance: srf08: add trivial DT binding
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH v2 13/13] drm/i915: Acquire P-Unit access when modifying P-Unit settings
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- Re: [PATCH v2 11/13] drm/i915: Add intel_uncore_suspend / resume functions
- From: Hans de Goede <hdegoede@xxxxxxxxxx>
- Re: [PATCH v8 09/12] dt-bindings: mux-adg792a: document devicetree bindings for ADG792A/G mux
- From: Jonathan Cameron <jic23@xxxxxxxxxx>
- Re: [PATCH] i2c: piix4: Fix request_region size
- From: Jean Delvare <jdelvare@xxxxxxx>
- Re: [PATCH] i2c: piix4: Fix request_region size
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
- Re: [PATCH] i2c: piix4: Fix request_region size
- From: Jean Delvare <jdelvare@xxxxxxx>
- Re: [PATCH v2 1/2] dt-bindings: Add Tegra186 BPMP I2C binding
- From: Stephen Warren <swarren@xxxxxxxxxxxxx>
- Re: [PATCH v8 09/12] dt-bindings: mux-adg792a: document devicetree bindings for ADG792A/G mux
- From: Peter Rosin <peda@xxxxxxxxxx>
- Re: [PATCH v2 1/2] dt-bindings: Add Tegra186 BPMP I2C binding
- From: Rob Herring <robh+dt@xxxxxxxxxx>
- Re: [PATCH v2 1/2] dt-bindings: Add Tegra186 BPMP I2C binding
- From: Thierry Reding <thierry.reding@xxxxxxxxx>
- Re: [PATCH v8 09/12] dt-bindings: mux-adg792a: document devicetree bindings for ADG792A/G mux
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v8 07/12] dt-bindings: i2c: i2c-mux-simple: document i2c-mux-simple bindings
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v8 05/12] dt-bindings: iio: io-channel-mux: document io-channel-mux bindings
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v8 02/12] dt-bindings: document devicetree bindings for mux-controllers and mux-gpio
- From: Peter Rosin <peda@xxxxxxxxxx>
- [PATCH] i2c: busses: constify i2c_algorithm structures
- From: Bhumika Goyal <bhumirks@xxxxxxxxx>
- Re: [PATCH v8 02/12] dt-bindings: document devicetree bindings for mux-controllers and mux-gpio
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v8 12/12] mux: support simplified bindings for single-user gpio mux
- From: Rob Herring <robh@xxxxxxxxxx>
- Re: [PATCH v2 1/2] dt-bindings: Add Tegra186 BPMP I2C binding
- From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
[Index of Archives]
[Linux USB Devel]
[Video for Linux]
[Scanner]
[Linux SCSI]
[Samba]
[Yosemite News]