Re: [PATCH] gpio-pca953x: fall back to byte-at-a-time for 24-bit io

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Andy

On 29/12/17 19:44, Andy Shevchenko wrote:
> On Tue, Dec 5, 2017 at 4:17 AM, Andrew Cooks <andrew.cooks@xxxxxxxxxxxx> wrote:
>> Using TCA6424A with i2c-piix4 bus driver requires byte-at-a-time IO,
>> because the i2c-piix4 driver (and probably some SMBus controllers) don't
>> support I2C_SMBUS_I2C_BLOCK_DATA.
> 
> Why not to fix piix4 for now?

The piix4 driver applies to so many chips and has been around for such a long time, that I don't know if this kind of change is safe to make. Do you think it's safe to assume that all the implementations that use this driver can handle the 3byte block writes?

I've added Jean to the CC list to get the piix4 maintainer's perspective.

> 
>>  static int pca953x_write_regs_24(struct pca953x_chip *chip, int reg, u8 *val)
>>  {
>> +       int ret, i;
>>         int bank_shift = fls((chip->gpio_chip.ngpio - 1) / BANK_SZ);
>>
>> -       return i2c_smbus_write_i2c_block_data(chip->client,
>> +       if (i2c_check_functionality(chip->client->adapter,
>> +                                   I2C_FUNC_SMBUS_WRITE_I2C_BLOCK)) {
>> +               return i2c_smbus_write_i2c_block_data(chip->client,
>>                                               (reg << bank_shift) | REG_ADDR_AI,
>>                                               NBANK(chip), val);
> 
>> +       } else {
> 
> Redundant and makes useless indentation level below.

Thanks, will fix this.

> 
>> +               for (i = 0; i < NBANK(chip); i++) {
>> +                       ret = i2c_smbus_write_byte_data(chip->client,
>> +                                                       (reg << 1) + i, val[i]);
>> +                       if (ret < 0)
>> +                               return ret;
>> +               }
>> +               return ret;
>> +       }
>>  }
>>
>>  static int pca953x_write_regs(struct pca953x_chip *chip, int reg, u8 *val)
>> @@ -249,7 +261,7 @@ static int pca953x_read_regs_24(struct pca953x_chip *chip, int reg, u8 *val)
>>  {
>>         int bank_shift = fls((chip->gpio_chip.ngpio - 1) / BANK_SZ);
>>
>> -       return i2c_smbus_read_i2c_block_data(chip->client,
>> +       return i2c_smbus_read_i2c_block_data_or_emulated(chip->client,
>>                                              (reg << bank_shift) | REG_ADDR_AI,
>>                                              NBANK(chip), val);
> 
> Don't we have a counter part for writing?
> 
> Perhaps, it might be another option.
> 

Again, I don't know if it's safe to assume that the i2c controllers can do this and would appreciate comments.

Thanks for your review!

a.



[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux