Linux Kernel I2C

• Thread Index

• Re: [PATCH v2 2/2] dt-bindings: aspeed-i2c: add properties for manual clock setting
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: i2c: qcom,i2c-qup: convert to dtschema
  • From: Robert Marko <robimarko@xxxxxxxxx>
• Re: [PATCH] dt-bindings: i2c: Rewrite Nomadik I2C bindings in YAML
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: i2c: qcom,i2c-qup: convert to dtschema
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v1 6/6] riscv: dts: sifive: "fix" pmic watchdog node name
  • From: mail@xxxxxxxxxxx
• [PATCH v1 5/6] MAINTAINERS: convert da9063 to yaml
  • From: mail@xxxxxxxxxxx
• [PATCH v1 4/6] dt-bindings: mfd: convert da9063 to yaml
  • From: mail@xxxxxxxxxxx
• [PATCH v1 3/6] MAINTAINERS: convert ocores i2c dt-binding to yaml
  • From: mail@xxxxxxxxxxx
• [PATCH v1 2/6] dt-bindings: i2c: convert ocores binding to yaml
  • From: mail@xxxxxxxxxxx
• [PATCH v1 1/6] dt-bindings: mmc: convert mmc-spi-slot to yaml
  • From: mail@xxxxxxxxxxx
• [PATCH v1 0/6] clear riscv dtbs_check errors
  • From: mail@xxxxxxxxxxx
• Re: [PATCH] dt-bindings: i2c: qcom,i2c-qup: convert to dtschema
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH] dt-bindings: i2c: qcom,i2c-qup: convert to dtschema
  • From: Robert Marko <robimarko@xxxxxxxxx>
• Issues with large reads on Cadence I2C on ZynqMP
  • From: Robert Hancock <robert.hancock@xxxxxxxxxx>
• Re: [PATCH 1/2] i2c: core: Add mux root adapter operations
  • From: Joel Stanley <joel@xxxxxxxxx>
• [PATCH v5] i2c: add support for microchip fpga i2c controllers
  • From: Conor Dooley <conor.dooley@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: aspeed: do not mask SLAVE_MATCH
  • From: Klaus Jensen <its@xxxxxxxxxxxxx>
• Re: [PATCH v2] i2c: qcom-cci: simplify access to bus data structure
  • From: Loic Poulain <loic.poulain@xxxxxxxxxx>
• [PATCH v2] i2c: qcom-cci: simplify access to bus data structure
  • From: Vladimir Zapolskiy <vladimir.zapolskiy@xxxxxxxxxx>
• Re: [PATCH] i2c: qcom-cci: simplify access to bus data structure
  • From: Vladimir Zapolskiy <vladimir.zapolskiy@xxxxxxxxxx>
• Re: [PATCH] i2c: qcom-cci: simplify access to bus data structure
  • From: Loic Poulain <loic.poulain@xxxxxxxxxx>
• [PATCH] i2c: qcom-cci: simplify access to bus data structure
  • From: Vladimir Zapolskiy <vladimir.zapolskiy@xxxxxxxxxx>
• Re: [RFC PATCH 01/14] media: dt-bindings: media: camss: Add qcom,msm8974-camss binding
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [Openipmi-developer] [PATCH v7 1/3] ipmi: ssif_bmc: Add SSIF BMC driver
  • From: Quan Nguyen <quan@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH] i2c: aspeed: do not mask SLAVE_MATCH
  • From: Klaus Jensen <its@xxxxxxxxxxxxx>
• Re: [Openipmi-developer] [PATCH v7 1/3] ipmi: ssif_bmc: Add SSIF BMC driver
  • From: Corey Minyard <minyard@xxxxxxx>
• Re: [PATCHv2 1/2] i2c: designware: introduce a custom scl recovery for SoCFPGA platforms
  • From: Dinh Nguyen <dinguyen@xxxxxxxxxx>
• Re: [PATCH 17/17] arm64: dts: mediatek: add mt8365-evk board device-tree
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 16/17] arm64: dts: mediatek: add mt8365 device-tree
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 15/17] arm64: dts: mediatek: add mt6357 device-tree
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 14/17] dt-bindings: usb: mediatek,mtk-xhci: add MT8365 SoC bindings
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 13/17] dt-bindings: usb: mediatek,mtu3: add MT8365 SoC bindings
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 12/17] dt-bindings: phy: mediatek,tphy: add MT8365 SoC bindings
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 10/17] dt-bindings: serial: mediatek: add MT8365 bindings
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 11/17] dt-bindings: phy: mediatek,dsi-phy: Add MT8365 SoC bindings
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 08/17] dt-bindings: watchdog: mtk-wdt: Add MT8365 SoC bindings
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 09/17] dt-bindings: spi: mt65xx: add MT8365 SoC bindings
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 07/17] dt-bindings: nvmem: mediatek,efuse: add MT8365 bindings
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 06/17] dt-bindings: iio: adc: mediatek: add MT8365 SoC bindings
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 04/17] dt-bindings: arm: mediatek: Add binding for mt8365-evk board
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 05/17] dt-bindings: dma: mediatek,uart-dma: add MT8365 bindings
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 02/17] dt-bindings: memory: add mt8365 SoC binding documentation
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 01/17] dt-bindings: i2c: i2c-mt65xx: add binding for MT8365 SoC
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 03/17] dt-bindings: mmc: mtk-sd: add bindings for MT8365 SoC
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 00/17] Add support for MT8365 EVK board
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [Openipmi-developer] [PATCH v7 1/3] ipmi: ssif_bmc: Add SSIF BMC driver
  • From: Quan Nguyen <quan@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH v2 0/2] Add i2c clock manual tuning feature for aspeed-i2c driver
  • From: Potin Lai <potin.lai.pt@xxxxxxxxx>
• [PATCH v2 1/2] aspeed: i2c: add manual clock setting feature
  • From: Potin Lai <potin.lai.pt@xxxxxxxxx>
• [PATCH v2 2/2] dt-bindings: aspeed-i2c: add properties for manual clock setting
  • From: Potin Lai <potin.lai.pt@xxxxxxxxx>
• Re: [PATCH] drivers/i2c-aspeed: avoid invalid memory reference after timeout
  • From: Heyi Guo <guoheyi@xxxxxxxxxxxxxxxxx>
• Re: [PULL REQUEST] i2c-for-5.19
  • From: pr-tracker-bot@xxxxxxxxxx
• [PULL REQUEST] i2c-for-5.19
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [Query] Looking for comments on CONFIG_SPI_SPIDEV and CONFIG_I2C_CHARDEV interfaces security
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [Query] Looking for comments on CONFIG_SPI_SPIDEV and CONFIG_I2C_CHARDEV interfaces security
  • From: Prasad Sodagudi <quic_psodagud@xxxxxxxxxxx>
• Re: [PATCH 1/1] aspeed: i2c: add manual clock setup feature
  • From: Potin Lai <potin.lai.pt@xxxxxxxxx>
• [PATCH 17/17] arm64: dts: mediatek: add mt8365-evk board device-tree
  • From: Fabien Parent <fparent@xxxxxxxxxxxx>
• [PATCH 13/17] dt-bindings: usb: mediatek,mtu3: add MT8365 SoC bindings
  • From: Fabien Parent <fparent@xxxxxxxxxxxx>
• [PATCH 11/17] dt-bindings: phy: mediatek,dsi-phy: Add MT8365 SoC bindings
  • From: Fabien Parent <fparent@xxxxxxxxxxxx>
• [PATCH 00/17] Add support for MT8365 EVK board
  • From: Fabien Parent <fparent@xxxxxxxxxxxx>
• [PATCH 06/17] dt-bindings: iio: adc: mediatek: add MT8365 SoC bindings
  • From: Fabien Parent <fparent@xxxxxxxxxxxx>
• [PATCH 09/17] dt-bindings: spi: mt65xx: add MT8365 SoC bindings
  • From: Fabien Parent <fparent@xxxxxxxxxxxx>
• [PATCH 04/17] dt-bindings: arm: mediatek: Add binding for mt8365-evk board
  • From: Fabien Parent <fparent@xxxxxxxxxxxx>
• [PATCH 01/17] dt-bindings: i2c: i2c-mt65xx: add binding for MT8365 SoC
  • From: Fabien Parent <fparent@xxxxxxxxxxxx>
• [PATCH 15/17] arm64: dts: mediatek: add mt6357 device-tree
  • From: Fabien Parent <fparent@xxxxxxxxxxxx>
• [PATCH 14/17] dt-bindings: usb: mediatek,mtk-xhci: add MT8365 SoC bindings
  • From: Fabien Parent <fparent@xxxxxxxxxxxx>
• [PATCH 07/17] dt-bindings: nvmem: mediatek,efuse: add MT8365 bindings
  • From: Fabien Parent <fparent@xxxxxxxxxxxx>
• [PATCH 16/17] arm64: dts: mediatek: add mt8365 device-tree
  • From: Fabien Parent <fparent@xxxxxxxxxxxx>
• [PATCH 12/17] dt-bindings: phy: mediatek,tphy: add MT8365 SoC bindings
  • From: Fabien Parent <fparent@xxxxxxxxxxxx>
• [PATCH 10/17] dt-bindings: serial: mediatek: add MT8365 bindings
  • From: Fabien Parent <fparent@xxxxxxxxxxxx>
• [PATCH 02/17] dt-bindings: memory: add mt8365 SoC binding documentation
  • From: Fabien Parent <fparent@xxxxxxxxxxxx>
• [PATCH 05/17] dt-bindings: dma: mediatek,uart-dma: add MT8365 bindings
  • From: Fabien Parent <fparent@xxxxxxxxxxxx>
• [PATCH 03/17] dt-bindings: mmc: mtk-sd: add bindings for MT8365 SoC
  • From: Fabien Parent <fparent@xxxxxxxxxxxx>
• [PATCH 08/17] dt-bindings: watchdog: mtk-wdt: Add MT8365 SoC bindings
  • From: Fabien Parent <fparent@xxxxxxxxxxxx>
• Re: [PATCH 1/1] aspeed: i2c: add manual clock setup feature
  • From: Patrick Williams <patrick@xxxxxxxxx>
• Re: [PATCH] i2c-xiic: Fix the type check for xiic_wakeup
  • From: Michal Simek <michal.simek@xxxxxxxxxx>
• Re: [PATCH] drivers/i2c-aspeed: avoid invalid memory reference after timeout
  • From: Lei Yu <yulei.sh@xxxxxxxxxxxxx>
• [PATCH] i2c: aspeed: Fix slave mode unexpected irq handler
  • From: ryan_chen <ryan_chen@xxxxxxxxxxxxxx>
• [PATCH v2 2/2] drivers: i2c: thunderx: Add support for High speed mode
  • From: Piyush Malgujar <pmalgujar@xxxxxxxxxxx>
• [PATCH v2 1/2] drivers: i2c: thunderx: octeontx2 clock divisor logic changes
  • From: Piyush Malgujar <pmalgujar@xxxxxxxxxxx>
• [PATCH v2 0/2] drivers: i2c: thunderx: Marvell thunderx i2c changes
  • From: Piyush Malgujar <pmalgujar@xxxxxxxxxxx>
• Re: [PATCH v1 1/1] MAINTAINERS: Update Synopsys DesingWare I2C to Supported
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• [PATCH v1 1/1] MAINTAINERS: Update Synopsys DesingWare I2C to Supported
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH 1/1] aspeed: i2c: add manual clock setup feature
  • From: Potin Lai <potin.lai.pt@xxxxxxxxx>
• Re: [PATCH 3/5] Input: pinephone-keyboard - Build in the default keymap
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH 1/2] i2c: core: Add mux root adapter operations
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v6 0/5] i2c: npcm: Bug fixes timeout, spurious interrupts
  • From: Tyrone Ting <warp5tw@xxxxxxxxx>
• [PATCH] dt-bindings: i2c: Rewrite Nomadik I2C bindings in YAML
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 2/2] iio: si7020: Lock root adapter to wait for reset
  • From: Eddie James <eajames@xxxxxxxxxxxxx>
• [PATCH 0/2] i2c: core: Add mux root adapter operations
  • From: Eddie James <eajames@xxxxxxxxxxxxx>
• [PATCH 1/2] i2c: core: Add mux root adapter operations
  • From: Eddie James <eajames@xxxxxxxxxxxxx>
• Re: [PATCHv2 1/2] i2c: designware: introduce a custom scl recovery for SoCFPGA platforms
  • From: Dinh Nguyen <dinguyen@xxxxxxxxxx>
• [PATCH] i2c: dummy: Drop no-op remove function
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [RFC PATCH 08/14] media: camss: Add 8x74 resources
  • From: Robert Foss <robert.foss@xxxxxxxxxx>
• Re: [RFC PATCH 07/14] media: camss: csiphy: Add support for 8x74
  • From: Robert Foss <robert.foss@xxxxxxxxxx>
• Re: [RFC PATCH 06/14] media: camss: ispif: Add support for 8x74
  • From: Robert Foss <robert.foss@xxxxxxxxxx>
• Re: [RFC PATCH 05/14] media: camss: csid: Add support for 8x74
  • From: Robert Foss <robert.foss@xxxxxxxxxx>
• Re: [RFC PATCH 04/14] media: camss: video: Add support for 8x74
  • From: Robert Foss <robert.foss@xxxxxxxxxx>
• Re: [RFC PATCH 03/14] media: camss: vfe: Add support for 8x74
  • From: Robert Foss <robert.foss@xxxxxxxxxx>
• Re: [RFC PATCH 02/14] media: camss: Add CAMSS_8x74 camss version
  • From: Robert Foss <robert.foss@xxxxxxxxxx>
• Re: [RFC PATCH 11/14] ARM: dts: qcom: msm8974: add CCI bus
  • From: Robert Foss <robert.foss@xxxxxxxxxx>
• Re: [PATCH] i2c: npcm7xx: barco-p50-gpio: Add check for platform_driver_register
  • From: Tali Perry <tali.perry1@xxxxxxxxx>
• Re: [PATCH] i2c: mediatek: Fix an error handling path in mtk_i2c_probe()
  • From: Qii Wang <qii.wang@xxxxxxxxxxxx>
• [PATCH] i2c: npcm7xx: barco-p50-gpio: Add check for platform_driver_register
  • From: Jiasheng Jiang <jiasheng@xxxxxxxxxxx>
• [PATCH] i2c-xiic: Fix the type check for xiic_wakeup
  • From: Shubhrajyoti Datta <shubhrajyoti.datta@xxxxxxxxxx>
• [PATCH] i2c: mxs: Silence a clang warning
  • From: Fabio Estevam <festevam@xxxxxxxxx>
• Re: [PATCH v1 3/5] HID: ft260: support i2c writes larger than HID report size
  • From: Guillaume Champagne <champagne.guillaume.c@xxxxxxxxx>
• Re: [PATCH v1 3/5] HID: ft260: support i2c writes larger than HID report size
  • From: Michael Zaidman <michael.zaidman@xxxxxxxxx>
• Re: [PATCH v6 0/5] i2c: npcm: Bug fixes timeout, spurious interrupts
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v1 3/5] HID: ft260: support i2c writes larger than HID report size
  • From: Guillaume Champagne <champagne.guillaume.c@xxxxxxxxx>
• Re: [PATCH] i2c: mv64xxx: Add atomic_xfer method to driver
  • From: Gregory CLEMENT <gregory.clement@xxxxxxxxxxx>
• Re: [PATCH] i2c: mv64xxx: Remove shutdown method from driver
  • From: Gregory CLEMENT <gregory.clement@xxxxxxxxxxx>
• [PATCH v4] i2c: add support for microchip fpga i2c controllers
  • From: Conor Dooley <conor.dooley@xxxxxxxxxxxxx>
• Re: [PATCH] HID: ft260: fix multi packet i2c transactions
  • From: Michael Zaidman <michael.zaidman@xxxxxxxxx>
• [PATCH v1 5/5] HID: ft260: improve i2c large reads performance
  • From: Michael Zaidman <michael.zaidman@xxxxxxxxx>
• [PATCH v1 4/5] HID: ft260: support i2c reads greater than HID report size
  • From: Michael Zaidman <michael.zaidman@xxxxxxxxx>
• [PATCH v1 3/5] HID: ft260: support i2c writes larger than HID report size
  • From: Michael Zaidman <michael.zaidman@xxxxxxxxx>
• [PATCH v1 2/5] HID: ft260: improve i2c write performance
  • From: Michael Zaidman <michael.zaidman@xxxxxxxxx>
• [PATCH v1 1/5] HID: ft260: ft260_xfer_status routine cleanup
  • From: Michael Zaidman <michael.zaidman@xxxxxxxxx>
• [PATCH v1 0/5] HID: ft260: fixes and performance improvements
  • From: Michael Zaidman <michael.zaidman@xxxxxxxxx>
• [PATCH v6 3/5] i2c: npcm: Correct slave role behavior
  • From: Tyrone Ting <warp5tw@xxxxxxxxx>
• [PATCH v6 5/5] i2c: npcm: Capitalize the one-line comment
  • From: Tyrone Ting <warp5tw@xxxxxxxxx>
• [PATCH v6 4/5] i2c: npcm: Support NPCM845
  • From: Tyrone Ting <warp5tw@xxxxxxxxx>
• [PATCH v6 2/5] i2c: npcm: Remove own slave addresses 2:10
  • From: Tyrone Ting <warp5tw@xxxxxxxxx>
• [PATCH v6 1/5] dt-bindings: i2c: npcm: support NPCM845
  • From: Tyrone Ting <warp5tw@xxxxxxxxx>
• [PATCH v6 0/5] i2c: npcm: Bug fixes timeout, spurious interrupts
  • From: Tyrone Ting <warp5tw@xxxxxxxxx>
• [PATCH] HID: ft260: fix multi packet i2c transactions
  • From: Guillaume Champagne <champagne.guillaume.c@xxxxxxxxx>
• Re: [PATCHv2 1/2] i2c: designware: introduce a custom scl recovery for SoCFPGA platforms
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH AUTOSEL 4.9 2/2] drivers: i2c: thunderx: Allow driver to work with ACPI defined TWSI controllers
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 3/3] drivers: i2c: thunderx: Allow driver to work with ACPI defined TWSI controllers
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 3/4] i2c: ismt: Provide a DMA buffer for Interrupt Cause Logging
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 4/4] drivers: i2c: thunderx: Allow driver to work with ACPI defined TWSI controllers
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.4 5/5] drivers: i2c: thunderx: Allow driver to work with ACPI defined TWSI controllers
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.4 4/5] i2c: ismt: Provide a DMA buffer for Interrupt Cause Logging
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.10 8/8] drivers: i2c: thunderx: Allow driver to work with ACPI defined TWSI controllers
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.10 7/8] i2c: ismt: Provide a DMA buffer for Interrupt Cause Logging
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.15 09/10] i2c: ismt: Provide a DMA buffer for Interrupt Cause Logging
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.15 10/10] drivers: i2c: thunderx: Allow driver to work with ACPI defined TWSI controllers
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.17 12/12] drivers: i2c: thunderx: Allow driver to work with ACPI defined TWSI controllers
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.17 11/12] i2c: ismt: Provide a DMA buffer for Interrupt Cause Logging
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• Re: [PATCH v2] i2c: busses: i2c-cadence: fix message length when receive block message
  • From: Michal Simek <michal.simek@xxxxxxxxxx>
• [PATCHv2 2/2] dt-bindings: i2c: dw: Add Intel's SoCFPGA I2C controller
  • From: Dinh Nguyen <dinguyen@xxxxxxxxxx>
• [PATCHv2 1/2] i2c: designware: introduce a custom scl recovery for SoCFPGA platforms
  • From: Dinh Nguyen <dinguyen@xxxxxxxxxx>
• [PATCH] i2ctransfer: Drop redundant variable arg_idx
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [RFC PATCH 00/14] CAMSS support for MSM8974
  • From: Brian Masney <bmasney@xxxxxxxxxx>
• Re: [PATCH v5 3/3] i2c: ch341: add I2C MFD cell driver for the CH341
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v5 2/3] gpio: ch341: add GPIO MFD cell driver for the CH341
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v5 3/3] i2c: ch341: add I2C MFD cell driver for the CH341
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v5 1/3] mfd: ch341: add core driver for the WCH CH341 in I2C/SPI/GPIO mode
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v5 3/3] i2c: ch341: add I2C MFD cell driver for the CH341
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [RFC PATCH 00/14] CAMSS support for MSM8974
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [RFC PATCH 01/14] media: dt-bindings: media: camss: Add qcom,msm8974-camss binding
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [RFC PATCH 09/14] dt-bindings: i2c: qcom-cci: add QCOM MSM8974 compatible
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH] i2c: ismt: Provide a DMA buffer for Interrupt Cause Logging
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: mediatek: Fix an error handling path in mtk_i2c_probe()
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• Re: [PATCH 1/3] i2c: rcar: use BIT macro consistently
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v2] i2c: rcar: fix PM ref counts in probe error paths
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH] i2c: core: Workaround false-positive LOCKDEP in delete_device
  • From: Alexander Sverdlin <alexander.sverdlin@xxxxxxxxx>
• Re: [PATCH] i2c: bcm2835: Use platform_get_irq() to get the interrupt
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH] i2c: bcm2835: Fix error handling in bcm2835_i2c_probe
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v5 08/10] i2c: npcm: Remove own slave addresses 2:10
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PULL REQUEST] i2c for v5.18
  • From: pr-tracker-bot@xxxxxxxxxx
• [RFC PATCH 04/14] media: camss: video: Add support for 8x74
  • From: Luca Weiss <luca@xxxxxxxxx>
• [RFC PATCH 08/14] media: camss: Add 8x74 resources
  • From: Luca Weiss <luca@xxxxxxxxx>
• [RFC PATCH 13/14] ARM: dts: qcom: msm8974-FP2: Add OV8865 rear camera
  • From: Luca Weiss <luca@xxxxxxxxx>
• [RFC PATCH 05/14] media: camss: csid: Add support for 8x74
  • From: Luca Weiss <luca@xxxxxxxxx>
• [RFC PATCH 06/14] media: camss: ispif: Add support for 8x74
  • From: Luca Weiss <luca@xxxxxxxxx>
• [RFC PATCH 10/14] i2c: qcom-cci: add msm8974 compatible
  • From: Luca Weiss <luca@xxxxxxxxx>
• [RFC PATCH 14/14] [DNM] media: camss: hacks for MSM8974
  • From: Luca Weiss <luca@xxxxxxxxx>
• [RFC PATCH 09/14] dt-bindings: i2c: qcom-cci: add QCOM MSM8974 compatible
  • From: Luca Weiss <luca@xxxxxxxxx>
• [RFC PATCH 12/14] ARM: dts: qcom: msm8974: add CAMSS node
  • From: Luca Weiss <luca@xxxxxxxxx>
• [RFC PATCH 01/14] media: dt-bindings: media: camss: Add qcom,msm8974-camss binding
  • From: Luca Weiss <luca@xxxxxxxxx>
• [RFC PATCH 02/14] media: camss: Add CAMSS_8x74 camss version
  • From: Luca Weiss <luca@xxxxxxxxx>
• [RFC PATCH 07/14] media: camss: csiphy: Add support for 8x74
  • From: Luca Weiss <luca@xxxxxxxxx>
• [RFC PATCH 03/14] media: camss: vfe: Add support for 8x74
  • From: Luca Weiss <luca@xxxxxxxxx>
• [RFC PATCH 00/14] CAMSS support for MSM8974
  • From: Luca Weiss <luca@xxxxxxxxx>
• [RFC PATCH 11/14] ARM: dts: qcom: msm8974: add CCI bus
  • From: Luca Weiss <luca@xxxxxxxxx>
• [PULL REQUEST] i2c for v5.18
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• [PATCH] i2c: mediatek: Fix an error handling path in mtk_i2c_probe()
  • From: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
• Re: [PATCH] i2c: ismt: Provide a DMA buffer for Interrupt Cause Logging
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v5 08/10] i2c: npcm: Remove own slave addresses 2:10
  • From: Tali Perry <tali.perry1@xxxxxxxxx>
• Re: [PATCH 2/2] dt-bindings: i2c: dw: Add Intel's SoCFPGA I2C controller
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH] i2c: bcm2835: Fix error handling in bcm2835_i2c_probe
  • From: Miaoqian Lin <linmq006@xxxxxxxxx>
• Re: [PATCH v5 10/10] i2c: npcm: Capitalize the one-line comment
  • From: Tyrone Ting <warp5tw@xxxxxxxxx>
• Re: [PATCH v5 09/10] i2c: npcm: Support NPCM845
  • From: Tyrone Ting <warp5tw@xxxxxxxxx>
• Re: [PATCH v5 07/10] i2c: npcm: Handle spurious interrupts
  • From: Tyrone Ting <warp5tw@xxxxxxxxx>
• Re: [PATCH v5 06/10] i2c: npcm: Correct register access width
  • From: Tyrone Ting <warp5tw@xxxxxxxxx>
• Re: [PATCH v5 05/10] i2c: npcm: Add tx complete counter
  • From: Tyrone Ting <warp5tw@xxxxxxxxx>
• Re: [PATCH v5 04/10] i2c: npcm: Fix timeout calculation
  • From: Tyrone Ting <warp5tw@xxxxxxxxx>
• Re: [PATCH v5 03/10] i2c: npcm: Remove unused variable clk_regmap
  • From: Tyrone Ting <warp5tw@xxxxxxxxx>
• Re: [PATCH v5 02/10] i2c: npcm: Change the way of getting GCR regmap
  • From: Tyrone Ting <warp5tw@xxxxxxxxx>
• Re: [PATCH v5 01/10] dt-bindings: i2c: npcm: support NPCM845
  • From: Tyrone Ting <warp5tw@xxxxxxxxx>
• Re: [PATCH] i2c: bcm2835: Fix error handling in bcm2835_i2c_probe
  • From: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
• Re: [PATCH v5 3/3] i2c: ch341: add I2C MFD cell driver for the CH341
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH] i2c: bcm2835: Fix error handling in bcm2835_i2c_probe
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH 1/3] drivers: i2c: thunderx: octeontx2 clock divisor logic changes
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH 3/3] drivers: i2c: thunderx: Allow driver to work with ACPI defined TWSI controllers
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH] i2c: meson: fix typo in comment
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v3] i2c: add support for microchip fpga i2c controllers
  • From: <Conor.Dooley@xxxxxxxxxxxxx>
• Re: [PATCH v3] i2c: add support for microchip fpga i2c controllers
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• [PATCH] i2c: meson: fix typo in comment
  • From: Julia Lawall <Julia.Lawall@xxxxxxxx>
• Re: [PATCH 3/3] i2c: rcar: use flags instead of atomic_xfer
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/3] i2c: rcar: REP_AFTER_RD is not a persistent flag
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/3] i2c: rcar: use BIT macro consistently
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: ismt: Provide a DMA buffer for Interrupt Cause Logging
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH] i2c: qcom-geni: remove unnecessary conditions
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: (EXT) [PATCH] i2c: imx: add irqf_no_suspend
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH -next v2 2/2] i2c: mt7621: Use devm_platform_get_and_ioremap_resource()
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH -next v2 1/2] i2c: mt7621: fix missing clk_disable_unprepare() on error in mtk_i2c_probe()
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: core: Workaround false-positive LOCKDEP in delete_device
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v3] i2c: add support for microchip fpga i2c controllers
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH 2/2] i2c: rcar: refactor handling of first message
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] i2c: rcar: avoid race condition with SMIs
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: mv64xxx: Add atomic_xfer method to driver
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH] i2c: mv64xxx: Remove shutdown method from driver
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v2] i2c: xiic: Correct the datatype for rx_watermark
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v2] i2c: rcar: fix PM ref counts in probe error paths
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v5 01/10] dt-bindings: i2c: npcm: support NPCM845
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v5 10/10] i2c: npcm: Capitalize the one-line comment
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v5 09/10] i2c: npcm: Support NPCM845
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v5 08/10] i2c: npcm: Remove own slave addresses 2:10
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v5 07/10] i2c: npcm: Handle spurious interrupts
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v5 06/10] i2c: npcm: Correct register access width
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v5 05/10] i2c: npcm: Add tx complete counter
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v5 04/10] i2c: npcm: Fix timeout calculation
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v5 03/10] i2c: npcm: Remove unused variable clk_regmap
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v5 02/10] i2c: npcm: Change the way of getting GCR regmap
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• [PATCH 3/3] i2c: rcar: use flags instead of atomic_xfer
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• [PATCH 1/3] i2c: rcar: use BIT macro consistently
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• [PATCH 2/3] i2c: rcar: REP_AFTER_RD is not a persistent flag
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• [PATCH 0/3] i2c: rcar: refactor flags
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• [PATCH] crypto: atmel-ecc - Remove duplicated error reporting in .remove()
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [RFC 1/2] i2c: core: Add adapter transfer callback
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH 1/2] i2c: rcar: avoid race condition with SMIs
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• [PATCH 2/2] i2c: rcar: refactor handling of first message
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• [PATCH 0/2] i2c: rcar: increase robustness against long SMIs
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• [PATCH v2] i2c: rcar: fix PM ref counts in probe error paths
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: rcar: call pm_runtime_put() only if it has ID_P_PM_BLOCKED
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• [PATCH v2] i2c: busses: i2c-cadence: fix message length when receive block message
  • From: Adam Wujek <dev_public@xxxxxxxx>
• Re: Systems with more than 4 memory slots not supported yet, not instantiating SPD
  • From: Diederik de Haas <didi.debian@xxxxxxxxx>
• decode-dimms does not detect SPD for kingston memory strips
  • From: Сергей Фёдоров <serfyod0vr@xxxxxxxxx>
• [PATCH] i2c: busses: i2c-cadence: fix message length when receive block message
  • From: Adam Wujek <dev_public@xxxxxxxx>
• Re: [PATCH 1/2] i2c: designware: introduce a custom scl recovery for SoCFPGA platforms
  • From: Dinh Nguyen <dinguyen@xxxxxxxxxx>
• Re: [PATCH 1/2] i2c: designware: introduce a custom scl recovery for SoCFPGA platforms
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: Bug in atmel-ecc driver
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [RFC 0/2] i2c: core and si7020: Add adapter transfer callback
  • From: Eddie James <eajames@xxxxxxxxxxxxx>
• [RFC 1/2] i2c: core: Add adapter transfer callback
  • From: Eddie James <eajames@xxxxxxxxxxxxx>
• [RFC 2/2] iio: humidity: si7020: Use core transfer callback to sleep after reset
  • From: Eddie James <eajames@xxxxxxxxxxxxx>
• [PATCH 1/2] i2c: designware: introduce a custom scl recovery for SoCFPGA platforms
  • From: Dinh Nguyen <dinguyen@xxxxxxxxxx>
• [PATCH 2/2] dt-bindings: i2c: dw: Add Intel's SoCFPGA I2C controller
  • From: Dinh Nguyen <dinguyen@xxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: i2c: add property to avoid device detection
  • From: Luca Ceresoli <luca@xxxxxxxxxxxxxxxx>
• Re: [PATCH v2 0/2] iio: humidity: si7020: Check device property for skipping reset in probe
  • From: Eddie James <eajames@xxxxxxxxxxxxx>
• Re: [PATCH v2 0/2] iio: humidity: si7020: Check device property for skipping reset in probe
  • From: Eddie James <eajames@xxxxxxxxxxxxx>
• Re: Bug in atmel-ecc driver
  • From: <Tudor.Ambarus@xxxxxxxxxxxxx>
• Re: [PATCH v2 4/4] powerpc/52xx: Convert to use fwnode API
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: Bug in atmel-ecc driver
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: Bug in atmel-ecc driver
  • From: <Tudor.Ambarus@xxxxxxxxxxxxx>
• Re: [PATCH v2] i2c: xiic: Correct the datatype for rx_watermark
  • From: Michal Simek <michal.simek@xxxxxxxxxx>
• Systems with more than 4 memory slots not supported yet, not instantiating SPD
  • From: Сергей Фёдоров <serfyod0vr@xxxxxxxxx>
• Re: Bug in atmel-ecc driver
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH v5 09/10] i2c: npcm: Support NPCM845
  • From: Tyrone Ting <warp5tw@xxxxxxxxx>
• [PATCH v5 10/10] i2c: npcm: Capitalize the one-line comment
  • From: Tyrone Ting <warp5tw@xxxxxxxxx>
• [PATCH v5 08/10] i2c: npcm: Remove own slave addresses 2:10
  • From: Tyrone Ting <warp5tw@xxxxxxxxx>
• [PATCH v5 07/10] i2c: npcm: Handle spurious interrupts
  • From: Tyrone Ting <warp5tw@xxxxxxxxx>
• [PATCH v5 01/10] dt-bindings: i2c: npcm: support NPCM845
  • From: Tyrone Ting <warp5tw@xxxxxxxxx>
• [PATCH v5 06/10] i2c: npcm: Correct register access width
  • From: Tyrone Ting <warp5tw@xxxxxxxxx>
• [PATCH v5 04/10] i2c: npcm: Fix timeout calculation
  • From: Tyrone Ting <warp5tw@xxxxxxxxx>
• [PATCH v5 03/10] i2c: npcm: Remove unused variable clk_regmap
  • From: Tyrone Ting <warp5tw@xxxxxxxxx>
• [PATCH v5 05/10] i2c: npcm: Add tx complete counter
  • From: Tyrone Ting <warp5tw@xxxxxxxxx>
• [PATCH v5 00/10] i2c: npcm: Bug fixes timeout, spurious interrupts
  • From: Tyrone Ting <warp5tw@xxxxxxxxx>
• [PATCH v5 02/10] i2c: npcm: Change the way of getting GCR regmap
  • From: Tyrone Ting <warp5tw@xxxxxxxxx>
• [RFC Patch v5 1/1] i2c debug counters as sysfs attributes
  • From: Sui Chen <suichen@xxxxxxxxxx>
• [RFC Patch v5 0/1] i2c: core: Adapter and client stats as sysfs attributes
  • From: Sui Chen <suichen@xxxxxxxxxx>
• [PATCH] i2c: core: Workaround false-positive LOCKDEP in delete_device
  • From: Alexander A Sverdlin <alexander.sverdlin@xxxxxxxxx>
• Re: [PATCH v4 2/9] i2c: npcm: Change the way of getting GCR regmap
  • From: Tyrone Ting <warp5tw@xxxxxxxxx>
• Re: [PATCH v4 2/9] i2c: npcm: Change the way of getting GCR regmap
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• [PATCH v2] i2c: xiic: Correct the datatype for rx_watermark
  • From: Shubhrajyoti Datta <shubhrajyoti.datta@xxxxxxxxxx>
• Re: [PATCH v4 2/9] i2c: npcm: Change the way of getting GCR regmap
  • From: Tyrone Ting <warp5tw@xxxxxxxxx>
• Re: [PATCH 1/3] drivers: i2c: thunderx: octeontx2 clock divisor logic changes
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v2 4/4] powerpc/52xx: Convert to use fwnode API
  • From: Michael Ellerman <mpe@xxxxxxxxxxxxxx>
• Re: [PATCH v4 2/9] i2c: npcm: Change the way of getting GCR regmap
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v2 3/3] i2c: gpio: support write-only sda
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v2 2/3] i2c: algo: bit: allow getsda to be NULL
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v2 4/4] powerpc/52xx: Convert to use fwnode API
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 4/4] powerpc/52xx: Convert to use fwnode API
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 4/4] powerpc/52xx: Convert to use fwnode API
  • From: Michael Ellerman <mpe@xxxxxxxxxxxxxx>
• Re: [PATCH] i2c: designware: Modify timing parameters for amdpsp mailbox
  • From: Jan Dąbroś <jsd@xxxxxxxxxxxx>
• Re: [PATCH 4/7] dt-bindings: renesas,rcar-dmac: R-Car V3U is R-Car Gen4
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH v3 0/9] introduce fwnode in the I2C subsystem
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: i2c: add property to avoid device detection
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: i2c: add property to avoid device detection
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH v3 0/9] introduce fwnode in the I2C subsystem
  • From: Clément Léger <clement.leger@xxxxxxxxxxx>
• [PATCH v3] i2c: add support for microchip fpga i2c controllers
  • From: Conor Dooley <conor.dooley@xxxxxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: i2c: add property to avoid device detection
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: i2c: add property to avoid device detection
  • From: Vincent Whitchurch <vincent.whitchurch@xxxxxxxx>
• Re: [PATCH -next v2 1/2] i2c: mt7621: fix missing clk_disable_unprepare() on error in mtk_i2c_probe()
  • From: Stefan Roese <sr@xxxxxxx>
• Re: [PATCH v7 3/3] i2c: aspeed: Assert NAK when slave is busy
  • From: Quan Nguyen <quan@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v4 8/9] i2c: npcm: Remove own slave addresses 2:10
  • From: Tyrone Ting <warp5tw@xxxxxxxxx>
• Re: [PATCH v3 0/9] introduce fwnode in the I2C subsystem
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH] i2c: at91: Initialize dma_buf in at91_twi_xfer()
  • From: Nathan Chancellor <nathan@xxxxxxxxxx>
• Re: [PATCH v2 0/2] iio: humidity: si7020: Check device property for skipping reset in probe
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH v3 0/9] introduce fwnode in the I2C subsystem
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v7 3/3] i2c: aspeed: Assert NAK when slave is busy
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: i2c: add property to avoid device detection
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH 7/7] dt-bindings: watchdog: renesas,wdt: R-Car V3U is R-Car Gen4
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [RFC v2 12/39] i2c: add HAS_IOPORT dependencies
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH 3/4] i2c: xiic: Correct the datatype for rx_watermark
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH 4/4] i2c: xiic: Fix Tx Interrupt path for grouped messages
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH 2/4] i2c: xiic: Fix coding style issues
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH 1/4] i2c-xiic: return value of xiic_reinit
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v2 RESEND] i2c: cadence: Increase timeout per message if necessary
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v2 2/2] i2c-tools: Implement and document option -h
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v2 1/2] i2c-tools: Use getopt
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH] i2c: designware: Sort timing parameter ACPI method calls by the speed
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH] i2c: at91: Initialize dma_buf in at91_twi_xfer()
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v2 0/2] iio: humidity: si7020: Check device property for skipping reset in probe
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH -next 1/2] i2c: mt7621: fix missing clk_disable_unprepare() on error in mtk_i2c_probe()
  • From: Yang Yingliang <yangyingliang@xxxxxxxxxx>
• [PATCH -next v2 1/2] i2c: mt7621: fix missing clk_disable_unprepare() on error in mtk_i2c_probe()
  • From: Yang Yingliang <yangyingliang@xxxxxxxxxx>
• [PATCH -next v2 2/2] i2c: mt7621: Use devm_platform_get_and_ioremap_resource()
  • From: Yang Yingliang <yangyingliang@xxxxxxxxxx>
• Re: [PATCH v2 0/2] iio: humidity: si7020: Check device property for skipping reset in probe
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH] i2c: at91: Initialize dma_buf in at91_twi_xfer()
  • From: Nathan Chancellor <nathan@xxxxxxxxxx>
• Re: [PATCH v2 0/2] iio: humidity: si7020: Check device property for skipping reset in probe
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH -next 1/2] i2c: mt7621: fix missing clk_disable_unprepare() on error in mtk_i2c_probe()
  • From: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
• Bug in atmel-ecc driver
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH -next 1/2] i2c: mt7621: fix missing clk_disable_unprepare() on error in mtk_i2c_probe()
  • From: Stefan Roese <sr@xxxxxxx>
• Re: [PATCH -next 2/2] i2c: mt7621: Use devm_platform_get_and_ioremap_resource()
  • From: Stefan Roese <sr@xxxxxxx>
• [PATCH -next 1/2] i2c: mt7621: fix missing clk_disable_unprepare() on error in mtk_i2c_probe()
  • From: Yang Yingliang <yangyingliang@xxxxxxxxxx>
• [PATCH -next 2/2] i2c: mt7621: Use devm_platform_get_and_ioremap_resource()
  • From: Yang Yingliang <yangyingliang@xxxxxxxxxx>
• Re: [PATCH v4 1/9] dt-bindings: i2c: npcm: support NPCM845
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v5 0/8] platform/x86: introduce p2sb_bar() helper
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH] i2c: mux: pca9541: replace ternary operator with min()
  • From: Guo Zhengkui <guozhengkui@xxxxxxxx>
• Re: [PATCH v5 0/8] platform/x86: introduce p2sb_bar() helper
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v5 0/8] platform/x86: introduce p2sb_bar() helper
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v5 0/8] platform/x86: introduce p2sb_bar() helper
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v5 0/8] platform/x86: introduce p2sb_bar() helper
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v5 5/8] mfd: lpc_ich: Add support for pinctrl in non-ACPI system
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v4 1/9] dt-bindings: i2c: npcm: support NPCM845
  • From: Tyrone Ting <warp5tw@xxxxxxxxx>
• Re: [PATCH v5 0/8] platform/x86: introduce p2sb_bar() helper
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v5 0/8] platform/x86: introduce p2sb_bar() helper
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v4 1/9] dt-bindings: i2c: npcm: support NPCM845
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH 1/3] drivers: i2c: thunderx: octeontx2 clock divisor logic changes
  • From: Piyush Malgujar <pmalgujar@xxxxxxxxxxx>
• [PATCH 3/3] drivers: i2c: thunderx: Allow driver to work with ACPI defined TWSI controllers
  • From: Piyush Malgujar <pmalgujar@xxxxxxxxxxx>
• [PATCH 2/3] drivers: i2c: thunderx: Add support for High speed mode
  • From: Piyush Malgujar <pmalgujar@xxxxxxxxxxx>
• [PATCH 0/3] drivers: i2c: thunderx: Marvell thunderx i2c changes
  • From: Piyush Malgujar <pmalgujar@xxxxxxxxxxx>
• Re: [PATCH v4 7/9] i2c: npcm: Handle spurious interrupts
  • From: Tyrone Ting <warp5tw@xxxxxxxxx>
• Re: [PATCH v4 8/9] i2c: npcm: Remove own slave addresses 2:10
  • From: Tyrone Ting <warp5tw@xxxxxxxxx>
• Re: [PATCH v4 2/9] i2c: npcm: Change the way of getting GCR regmap
  • From: Tyrone Ting <warp5tw@xxxxxxxxx>
• [PATCH v2] i2c: core: Fix possible memleak in i2c_new_client_device()
  • From: Yang Yingliang <yangyingliang@xxxxxxxxxx>
• Re: [PATCH v4 1/9] dt-bindings: i2c: npcm: support NPCM845
  • From: Tyrone Ting <warp5tw@xxxxxxxxx>
• [PATCH v5 5/8] mfd: lpc_ich: Add support for pinctrl in non-ACPI system
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v5 6/8] i2c: i801: convert to use common P2SB accessor
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v5 8/8] EDAC, pnd2: convert to use common P2SB accessor
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v5 7/8] EDAC, pnd2: Use proper I/O accessors and address space annotation
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v5 3/8] mfd: lpc_ich: Factor out lpc_ich_enable_spi_write()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v5 1/8] platform/x86/intel: Add Primary to Sideband (P2SB) bridge support
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v5 4/8] mfd: lpc_ich: Switch to generic p2sb_bar()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v5 2/8] pinctrl: intel: Check against matching data instead of ACPI companion
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v5 0/8] platform/x86: introduce p2sb_bar() helper
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v4 8/9] i2c: npcm: Remove own slave addresses 2:10
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v4 7/9] i2c: npcm: Handle spurious interrupts
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v4 2/9] i2c: npcm: Change the way of getting GCR regmap
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v4 9/9] i2c: npcm: Support NPCM845
  • From: Tyrone Ting <warp5tw@xxxxxxxxx>
• [PATCH v4 8/9] i2c: npcm: Remove own slave addresses 2:10
  • From: Tyrone Ting <warp5tw@xxxxxxxxx>
• [PATCH v4 7/9] i2c: npcm: Handle spurious interrupts
  • From: Tyrone Ting <warp5tw@xxxxxxxxx>
• [PATCH v4 6/9] i2c: npcm: Correct register access width
  • From: Tyrone Ting <warp5tw@xxxxxxxxx>
• [PATCH v4 5/9] i2c: npcm: Add tx complete counter
  • From: Tyrone Ting <warp5tw@xxxxxxxxx>
• [PATCH v4 4/9] i2c: npcm: Fix timeout calculation
  • From: Tyrone Ting <warp5tw@xxxxxxxxx>
• [PATCH v4 2/9] i2c: npcm: Change the way of getting GCR regmap
  • From: Tyrone Ting <warp5tw@xxxxxxxxx>
• [PATCH v4 1/9] dt-bindings: i2c: npcm: support NPCM845
  • From: Tyrone Ting <warp5tw@xxxxxxxxx>
• [PATCH v4 3/9] i2c: npcm: Remove unused variable clk_regmap
  • From: Tyrone Ting <warp5tw@xxxxxxxxx>
• [PATCH v4 0/9] i2c: npcm: Bug fixes timeout, spurious interrupts
  • From: Tyrone Ting <warp5tw@xxxxxxxxx>
• [PATCH v2 1/2] i2c-tools: Use getopt
  • From: Jean Delvare <jdelvare@xxxxxxx>
• [PATCH v2 2/2] i2c-tools: Implement and document option -h
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH v4 1/8] platform/x86/intel: Add Primary to Sideband (P2SB) bridge support
  • From: Lukas Wunner <lukas@xxxxxxxxx>
• Re: [PATCH v4 1/8] platform/x86/intel: Add Primary to Sideband (P2SB) bridge support
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v4 1/8] platform/x86/intel: Add Primary to Sideband (P2SB) bridge support
  • From: Lukas Wunner <lukas@xxxxxxxxx>
• Re: [PATCH v4 0/8] platform/x86: introduce p2sb_bar() helper
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 3/4] powerpc/52xx: Get rid of of_node assignment
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 4/4] powerpc/52xx: Convert to use fwnode API
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 1/4] powerpc/52xx: Remove dead code, i.e. mpc52xx_get_xtal_freq()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 2/4] powerpc/mpc5xxx: Switch mpc5xxx_get_bus_frequency() to use fwnode
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] i2c-tools: Use getopt
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v2] i2c: s3c2410: change return type of 'i2c_s3c_irq_nextbyte' from 'int' to 'void'
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH 1/2] i2c-tools: Use getopt
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH 1/2] i2c-tools: Use getopt
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• [PATCH 2/2] i2c-tools: Implement and document option -h
  • From: Jean Delvare <jdelvare@xxxxxxx>
• [PATCH 1/2] i2c-tools: Use getopt
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH v2] i2c: s3c2410: change return type of 'i2c_s3c_irq_nextbyte' from 'int' to 'void'
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v2] i2c: s3c2410: change return type of 'i2c_s3c_irq_nextbyte' from 'int' to 'void'
  • From: Yihao Han <hanyihao@xxxxxxxx>
• Re: [PATCH] i2c: s3c2410: change return type of 'i2c_s3c_irq_nextbyte' from 'int' to 'void'
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH] i2c: s3c2410: change return type of 'i2c_s3c_irq_nextbyte' from 'int' to 'void'
  • From: Yihao Han <hanyihao@xxxxxxxx>
• Re: regression: Null pointer exception on resume from S3 with i2c DesignWare driver
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: s3c2410: fix returnvar.cocci warning
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH] i2c: s3c2410: fix returnvar.cocci warning
  • From: Yihao Han <hanyihao@xxxxxxxx>
• Re: [PATCH v4 1/8] platform/x86/intel: Add Primary to Sideband (P2SB) bridge support
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH] i2c: at91: Initialize dma_buf in at91_twi_xfer()
  • From: Michael Walle <michael@xxxxxxxx>
• [PATCH] i2c: at91: Initialize dma_buf in at91_twi_xfer()
  • From: Nathan Chancellor <nathan@xxxxxxxxxx>
• Re: [PATCH v2] i2c: at91: use dma safe buffers
  • From: Nathan Chancellor <nathan@xxxxxxxxxx>
• Re: [PATCH v2] i2c: at91: use dma safe buffers
  • From: Michael Walle <michael@xxxxxxxx>
• Re: [PATCH v4 1/8] platform/x86/intel: Add Primary to Sideband (P2SB) bridge support
  • From: Lukas Wunner <lukas@xxxxxxxxx>
• Re: [PATCH v2] i2c: at91: use dma safe buffers
  • From: Nathan Chancellor <nathan@xxxxxxxxxx>
• Re: [PATCH 1/7] dt-bindings: gpio: renesas,rcar-gpio: R-Car V3U is R-Car Gen4
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• regression: Null pointer exception on resume from S3 with i2c DesignWare driver
  • From: Thorsten Leemhuis <regressions@xxxxxxxxxxxxx>
• Re: [PATCH v1 2/4] powerpc/mpc5xxx: Switch mpc5xxx_get_bus_frequency() to use fwnode
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v1 2/4] powerpc/mpc5xxx: Switch mpc5xxx_get_bus_frequency() to use fwnode
  • From: Chris Packham <Chris.Packham@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v1 2/4] powerpc/mpc5xxx: Switch mpc5xxx_get_bus_frequency() to use fwnode
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v2] i2c: at91: use dma safe buffers
  • From: Michael Walle <michael@xxxxxxxx>
• Re: [PATCH] i2c: i2c-davinci: using pm_runtime_resume_and_get instead of pm_runtime_get_sync
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH -next] i2c: meson: fix missing clk_disable_unprepare() on error in meson_i2c_probe()
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH] docs: i2c: reference simple probes
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH] i2c: powermac: Prepare cleanup of powerpc's asm/prom.h
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v2] i2c: at91: use dma safe buffers
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v2] i2c: mediatek: Optimize master_xfer() and avoid circular locking
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v1 2/4] powerpc/mpc5xxx: Switch mpc5xxx_get_bus_frequency() to use fwnode
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v1 1/4] powerpc/52xx: Remove dead code, i.e. mpc52xx_get_xtal_freq()
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH] i2c: designware: Modify timing parameters for amdpsp mailbox
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH 2/7] dt-bindings: i2c: renesas,rcar-i2c: R-Car V3U is R-Car Gen4
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 7/7] dt-bindings: watchdog: renesas,wdt: R-Car V3U is R-Car Gen4
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 6/7] dt-bindings: serial: renesas,scif: R-Car V3U is R-Car Gen4
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 5/7] dt-bindings: serial: renesas,hscif: R-Car V3U is R-Car Gen4
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 3/7] dt-bindings: iommu: renesas,ipmmu-vmsa: R-Car V3U is R-Car Gen4
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/7] dt-bindings: i2c: renesas,rcar-i2c: R-Car V3U is R-Car Gen4
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/7] dt-bindings: gpio: renesas,rcar-gpio: R-Car V3U is R-Car Gen4
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2] i2c: add support for microchip fpga i2c controllers
  • From: Conor Dooley <mail@xxxxxxxxxxx>
• Re: [PATCH v4 0/8] platform/x86: introduce p2sb_bar() helper
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v4 0/8] platform/x86: introduce p2sb_bar() helper
  • From: Henning Schild <henning.schild@xxxxxxxxxxx>
• Re: [PATCH v1 2/4] powerpc/mpc5xxx: Switch mpc5xxx_get_bus_frequency() to use fwnode
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v1 2/4] powerpc/mpc5xxx: Switch mpc5xxx_get_bus_frequency() to use fwnode
  • From: Damien Le Moal <damien.lemoal@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v1 2/4] powerpc/mpc5xxx: Switch mpc5xxx_get_bus_frequency() to use fwnode
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH v1 2/4] powerpc/mpc5xxx: Switch mpc5xxx_get_bus_frequency() to use fwnode
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 3/4] powerpc/52xx: Get rid of of_node assignment
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 4/4] powerpc/52xx: Convert to use fwnode API
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 1/4] powerpc/52xx: Remove dead code, i.e. mpc52xx_get_xtal_freq()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v2] i2c: add support for microchip fpga i2c controllers
  • From: <Conor.Dooley@xxxxxxxxxxxxx>
• Re: [PATCH v4 5/8] mfd: lpc_ich: Add support for pinctrl in non-ACPI system
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v4 0/8] platform/x86: introduce p2sb_bar() helper
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [Openipmi-developer] [PATCH v7 1/3] ipmi: ssif_bmc: Add SSIF BMC driver
  • From: Corey Minyard <minyard@xxxxxxx>
• Re: [PATCH v2] i2c: add support for microchip fpga i2c controllers
  • From: <Conor.Dooley@xxxxxxxxxxxxx>
• Re: [PATCH 3/7] dt-bindings: iommu: renesas,ipmmu-vmsa: R-Car V3U is R-Car Gen4
  • From: Joerg Roedel <joro@xxxxxxxxxx>
• Re: [PATCH v7 1/3] ipmi: ssif_bmc: Add SSIF BMC driver
  • From: Quan Nguyen <quan@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/3] dt-bindings: i2c-gpio: Add property i2c-gpio,sda-output-only
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 1/4] dt-bindings: I2C: Add Qualcomm Geni based QUP I2C bindings
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 6/7] dt-bindings: serial: renesas,scif: R-Car V3U is R-Car Gen4
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 5/7] dt-bindings: serial: renesas,hscif: R-Car V3U is R-Car Gen4
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 4/7] dt-bindings: renesas,rcar-dmac: R-Car V3U is R-Car Gen4
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 7/7] dt-bindings: watchdog: renesas,wdt: R-Car V3U is R-Car Gen4
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 3/7] dt-bindings: iommu: renesas,ipmmu-vmsa: R-Car V3U is R-Car Gen4
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 2/7] dt-bindings: i2c: renesas,rcar-i2c: R-Car V3U is R-Car Gen4
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 1/7] dt-bindings: gpio: renesas,rcar-gpio: R-Car V3U is R-Car Gen4
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2] i2c: at91: use dma safe buffers
  • From: Michael Walle <michael@xxxxxxxx>
• Re: [PATCH v2] dt-bindings: eeprom/at24: Add samsung,s524ad0xd1 compatible
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v4 5/8] mfd: lpc_ich: Add support for pinctrl in non-ACPI system
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH 6/7] dt-bindings: serial: renesas,scif: R-Car V3U is R-Car Gen4
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• [PATCH 7/7] dt-bindings: watchdog: renesas,wdt: R-Car V3U is R-Car Gen4
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• [PATCH 3/7] dt-bindings: iommu: renesas,ipmmu-vmsa: R-Car V3U is R-Car Gen4
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• [PATCH 1/7] dt-bindings: gpio: renesas,rcar-gpio: R-Car V3U is R-Car Gen4
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• [PATCH 0/7] dt-bindings: renesas: R-Car V3U is R-Car Gen4
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• [PATCH 2/7] dt-bindings: i2c: renesas,rcar-i2c: R-Car V3U is R-Car Gen4
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• [PATCH 5/7] dt-bindings: serial: renesas,hscif: R-Car V3U is R-Car Gen4
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• [PATCH 4/7] dt-bindings: renesas,rcar-dmac: R-Car V3U is R-Car Gen4
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• Re: [PATCH v2] dt-bindings: eeprom/at24: Add samsung,s524ad0xd1 compatible
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [RFC v2 12/39] i2c: add HAS_IOPORT dependencies
  • From: Niklas Schnelle <schnelle@xxxxxxxxxxxxx>
• [PATCH v3 1/1] i2c: core: support no-detect property
  • From: Vincent Whitchurch <vincent.whitchurch@xxxxxxxx>
• [PATCH v3 0/1] i2c: Allow disabling auto detection via devicetree
  • From: Vincent Whitchurch <vincent.whitchurch@xxxxxxxx>
• Re: [PATCH] i2c: designware: Modify timing parameters for amdpsp mailbox
  • From: Jan Dąbroś <jsd@xxxxxxxxxxxx>
• Re: [PATCH] i2c: designware: Modify timing parameters for amdpsp mailbox
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• [PATCH] i2c: designware: Modify timing parameters for amdpsp mailbox
  • From: Jan Dabros <jsd@xxxxxxxxxxxx>
• Re: [PATCH v2 1/4] dt-bindings: I2C: Add Qualcomm Geni based QUP I2C bindings
  • From: Kuldeep Singh <singh.kuldeep87k@xxxxxxxxx>
• [PATCH v2 3/3] i2c: gpio: support write-only sda
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH v2 1/3] dt-bindings: i2c-gpio: Add property i2c-gpio,sda-output-only
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH v2 2/3] i2c: algo: bit: allow getsda to be NULL
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH v2 0/3] i2c: gpio: support write-only sda
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• Re: [PATCH] i2c: ismt: Provide a DMA buffer for Interrupt Cause Logging
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH] i2c: ismt: Provide a DMA buffer for Interrupt Cause Logging
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: i2c-gpio: Add property i2c-gpio,sda-output-only
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2] dt-bindings: eeprom/at24: Add samsung,s524ad0xd1 compatible
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v2] dt-bindings: eeprom/at24: Add samsung,s524ad0xd1 compatible
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v5 1/3] mfd: ch341: add core driver for the WCH CH341 in I2C/SPI/GPIO mode
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: eeprom/at24: Add samsung,s524ad0xd1 compatible
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] i2c: designware: Sort timing parameter ACPI method calls by the speed
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v7 2/3] bindings: ipmi: Add binding for SSIF BMC driver
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2] dt-bindings: i2c: renesas,riic: Document RZ/G2UL SoC
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v2] dt-bindings: i2c: renesas,riic: Document RZ/G2UL SoC
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• RE: [PATCH] dt-bindings: i2c: renesas,riic: Document RZ/G2UL SoC
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: i2c: renesas,riic: Document RZ/G2UL SoC
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• [PATCH] drm/msm/dsi: fix error check return value of irq_of_parse_and_map()
  • From: cgel.zte@xxxxxxxxx
• [PATCH] i2c: mux: reg: check return value after calling platform_get_resource()
  • From: Yang Yingliang <yangyingliang@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: i2c: renesas,riic: Document RZ/G2UL SoC
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: eeprom/at24: Add samsung,s524ad0xd1 compatible
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH] dt-bindings: i2c: renesas,riic: Document RZ/G2UL SoC
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• [PATCH v2 1/2] irqchip/aspeed-i2c-ic: Fix irq_of_parse_and_map() return value
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v2 2/2] irqchip/aspeed-scu-ic: Fix irq_of_parse_and_map() return value
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 1/2] irqchip/aspeed-i2c-ic: Fix irq_of_parse_and_map() return value
  • From: Marc Zyngier <maz@xxxxxxxxxx>
• Re: [PATCH 1/2] irqchip/aspeed-i2c-ic: Fix irq_of_parse_and_map() return value
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v7 1/3] ipmi: ssif_bmc: Add SSIF BMC driver
  • From: Corey Minyard <minyard@xxxxxxx>
• [PATCH] dt-bindings: eeprom/at24: Add samsung,s524ad0xd1 compatible
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH 2/2] irqchip/aspeed-scu-ic: Fix irq_of_parse_and_map() return value
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 1/2] irqchip/aspeed-i2c-ic: Fix irq_of_parse_and_map() return value
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v7 2/3] bindings: ipmi: Add binding for SSIF BMC driver
  • From: Quan Nguyen <quan@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v7 2/3] bindings: ipmi: Add binding for SSIF BMC driver
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v7 2/3] bindings: ipmi: Add binding for SSIF BMC driver
  • From: Quan Nguyen <quan@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v7 3/3] i2c: aspeed: Assert NAK when slave is busy
  • From: Quan Nguyen <quan@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v7 1/3] ipmi: ssif_bmc: Add SSIF BMC driver
  • From: Quan Nguyen <quan@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v7 0/3] Add SSIF BMC driver
  • From: Quan Nguyen <quan@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH v7 0/3] Add SSIF BMC driver
  • From: Quan Nguyen <quan@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH v7 3/3] i2c: aspeed: Assert NAK when slave is busy
  • From: Quan Nguyen <quan@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH v7 2/3] bindings: ipmi: Add binding for SSIF BMC driver
  • From: Quan Nguyen <quan@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH v7 1/3] ipmi: ssif_bmc: Add SSIF BMC driver
  • From: Quan Nguyen <quan@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2] i2c: mediatek: Optimize master_xfer() and avoid circular locking
  • From: Qii Wang <qii.wang@xxxxxxxxxxxx>
• Re: [PATCH v2] i2c: mediatek: Optimize master_xfer() and avoid circular locking
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• Re: [PATCH -next] i2c: meson: fix missing clk_disable_unprepare() on error in meson_i2c_probe()
  • From: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
• Re: [PATCH 4/4] i2c: xiic: Fix Tx Interrupt path for grouped messages
  • From: Michal Simek <michal.simek@xxxxxxxxxx>
• Re: [PATCH 3/4] i2c: xiic: Correct the datatype for rx_watermark
  • From: Michal Simek <michal.simek@xxxxxxxxxx>
• [PATCH -next] i2c: meson: fix missing clk_disable_unprepare() on error in meson_i2c_probe()
  • From: Yang Yingliang <yangyingliang@xxxxxxxxxx>
• Re: [PATCH 1/4] i2c-xiic: return value of xiic_reinit
  • From: Michal Simek <michal.simek@xxxxxxxxxx>
• Re: [v8 2/3] i2c: muxes: pca954x: Add MAX735x/MAX736x support
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [v8 1/3] dt-bindings: i2c: Add Maxim MAX735x/MAX736x variants
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH] i2c: designware: Sort timing parameter ACPI method calls by the speed
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• [PATCH 4/4] i2c: xiic: Fix Tx Interrupt path for grouped messages
  • From: Shubhrajyoti Datta <shubhrajyoti.datta@xxxxxxxxxx>
• [PATCH 1/4] i2c-xiic: return value of xiic_reinit
  • From: Shubhrajyoti Datta <shubhrajyoti.datta@xxxxxxxxxx>
• [PATCH 3/4] i2c: xiic: Correct the datatype for rx_watermark
  • From: Shubhrajyoti Datta <shubhrajyoti.datta@xxxxxxxxxx>
• [PATCH 2/4] i2c: xiic: Fix coding style issues
  • From: Shubhrajyoti Datta <shubhrajyoti.datta@xxxxxxxxxx>
• [PATCH 0/4] i2c: xiic: misc fixes
  • From: Shubhrajyoti Datta <shubhrajyoti.datta@xxxxxxxxxx>
• Re: [PATCH v5 2/3] gpio: ch341: add GPIO MFD cell driver for the CH341
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: Supplies needed from INDIA, reply for details
  • From: "GCAP Supplies" <www@xxxxxxxxxxxxxxx>
• Re: [v8 1/3] dt-bindings: i2c: Add Maxim MAX735x/MAX736x variants
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• [v8 2/3] i2c: muxes: pca954x: Add MAX735x/MAX736x support
  • From: Patrick Rudolph <patrick.rudolph@xxxxxxxxxxxxx>
• [v8 1/3] dt-bindings: i2c: Add Maxim MAX735x/MAX736x variants
  • From: Patrick Rudolph <patrick.rudolph@xxxxxxxxxxxxx>
• [v8 3/3] i2c: muxes: pca954x: Add regulator support
  • From: Patrick Rudolph <patrick.rudolph@xxxxxxxxxxxxx>
• [v8 0/3] Add support for Maxim MAX735x/MAX736x variants
  • From: Patrick Rudolph <patrick.rudolph@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: i2c-davinci: using pm_runtime_resume_and_get instead of pm_runtime_get_sync
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH] misc/eeprom: using pm_runtime_resume_and_get instead of pm_runtime_get_sync
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH] misc/eeprom: using pm_runtime_resume_and_get instead of pm_runtime_get_sync
  • From: cgel.zte@xxxxxxxxx
• Re: [PULL REQUEST] i2c for v5.18
  • From: pr-tracker-bot@xxxxxxxxxx
• Re: [PULL REQUEST] i2c for v5.18
  • From: Linus Torvalds <torvalds@xxxxxxxxxxxxxxxxxxxx>
• Re: i801: I2C block read should be usable also on ICH/ICH0/ICH2/ICH3/ICH4
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PULL REQUEST] i2c for v5.18
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: i801: I2C block read should be usable also on ICH/ICH0/ICH2/ICH3/ICH4
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: i2c: i2c-mt65xx: remove mt6577 support
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH 2/2] i2c: mediatek: remove mt6577 support
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH 0/2] i2c: mediatek: remove mt6577 support
  • From: Boris Lysov <arzamas-16@xxxxxxx>
• Re: [PATCH v2 2/2] i2c: meson: Use 50% duty cycle for I2C clock
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v2 1/2] i2c: meson: Use _SHIFT and _MASK for register definitions
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v1 2/2] i2c: dev: Force case user pointers in compat_i2cdev_ioctl()
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v4] i2c: rcar: add support for I2C_M_RECV_LEN
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v1 1/2] i2c: dev: check return value when calling dev_set_name()
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH] i2c: qcom-geni: Use dev_err_probe() for GPI DMA error
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH] i2c: imx: Implement errata ERR007805 or e7805 bus frequency limit
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v4 8/9] dt-bindings: i2c: qcom,i2c-qup: convert to dtschema
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH] i2c: pasemi: Wait for write xfers to finish
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• [PATCH 8/8] i2c: i801: call i801_check_post() from i801_access()
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH 7/8] i2c: i801: call i801_check_pre() from i801_access()
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH 6/8] i2c: i801: add i801_single_transaction(), complementing i801_block_transaction()
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH 5/8] i2c: i801: add helper i801_set_hstadd()
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH 4/8] i2c: i801: enable FEATURE_IRQ and FEATURE_I2C_BLOCK_READ on all chip versions
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH 1/8] i2c: i801: improve interrupt handler
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH 2/8] i2c: i801: make FEATURE_HOST_NOTIFY dependent on FEATURE_IRQ
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH 3/8] i2c: i801: make FEATURE_BLOCK_PROC dependent on FEATURE_BLOCK_BUFFER
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH 0/8] i2c: i801: Series with minor improvements
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH 3/3] i2c: gpio: support write-only sda
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH 2/3] i2c: algo: bit: allow getsda to be NULL
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH 1/3] dt-bindings: i2c-gpio: Add property i2c-gpio,sda-output-only
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH 0/3] i2c: gpio: support write-only sda
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: i2c: add property to avoid device detection
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2] media: ov5640: Use runtime PM
  • From: Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxx>
• [PATCH] i2c: i2c-davinci: using pm_runtime_resume_and_get instead of pm_runtime_get_sync
  • From: cgel.zte@xxxxxxxxx
• Re: [PATCH v2 1/2] dt-bindings: i2c: add property to avoid device detection
  • From: Vincent Whitchurch <vincent.whitchurch@xxxxxxxx>
• [PATCH] i2c: rcar: use flags instead of atomic_xfer
  • From: Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxxxx>
• [PATCH] i2c: rcar: call pm_runtime_put() only if it has ID_P_PM_BLOCKED
  • From: Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxxxx>
• Re: [PATCH v2 1/3] ARM: dts: at91: sama7g5: Swap `rx` and `tx` for `i2c` nodes
  • From: Nicolas Ferre <nicolas.ferre@xxxxxxxxxxxxx>
• [PATCH v2 RESEND] i2c: cadence: Increase timeout per message if necessary
  • From: Lucas Tanure <tanureal@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: amd-mp2: Remove name from maintainers list
  • From: Shyam Sundar S K <Shyam-sundar.S-k@xxxxxxx>
• Re: [PATCH] i2c: qcom-geni: Use dev_err_probe() for GPI DMA error
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH] i2c: qcom-geni: Use dev_err_probe() for GPI DMA error
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: i2c: add property to avoid device detection
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH] i2c: qcom-geni: Use dev_err_probe() for GPI DMA error
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [RFC Patch v4 1/1] i2c debug counters as sysfs attributes
  • From: Avi Fishman <avifishman70@xxxxxxxxx>
• Re: [PATCH 3/5] Input: pinephone-keyboard - Build in the default keymap
  • From: Ondřej Jirman <x@xxxxxx>
• Re: [PATCH 3/5] Input: pinephone-keyboard - Build in the default keymap
  • From: Jarrah <kernel@undef.tools>
• RE: [PATCH v2] i2c: cadence: Add standard bus recovery support
  • From: Shubhrajyoti Datta <shubhraj@xxxxxxxxxx>
• [PATCH v2 0/2] i2c: Allow disabling auto detection via devicetree
  • From: Vincent Whitchurch <vincent.whitchurch@xxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: i2c: add property to avoid device detection
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v2 1/2] dt-bindings: i2c: add property to avoid device detection
  • From: Vincent Whitchurch <vincent.whitchurch@xxxxxxxx>
• [PATCH v2 2/2] i2c: core: support no-detect property
  • From: Vincent Whitchurch <vincent.whitchurch@xxxxxxxx>
• Re: [RFC Patch v4 1/1] i2c debug counters as sysfs attributes
  • From: Sui Chen <suichen@xxxxxxxxxx>
• [PATCH v1 1/2] i2c: dev: check return value when calling dev_set_name()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 2/2] i2c: dev: Force case user pointers in compat_i2cdev_ioctl()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2] i2c: mediatek: Optimize master_xfer() and avoid circular locking
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• Re: [PATCH v2 0/2] Ensure High and Low periods of SCL are correct
  • From: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
• Re: [PATCH v2 2/2] i2c: meson: Use 50% duty cycle for I2C clock
  • From: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
• Re: [PATCH v2 1/2] i2c: meson: Use _SHIFT and _MASK for register definitions
  • From: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
• Re: [PATCH v3 09/11] i2c: npcm: Handle spurious interrupts
  • From: Avi Fishman <avifishman70@xxxxxxxxx>
• [PATCH v2 1/2] i2c: meson: Use _SHIFT and _MASK for register definitions
  • From: Lucas Tanure <tanure@xxxxxxxxx>
• [PATCH v2 0/2] Ensure High and Low periods of SCL are correct
  • From: Lucas Tanure <tanure@xxxxxxxxx>
• [PATCH v2 2/2] i2c: meson: Use 50% duty cycle for I2C clock
  • From: Lucas Tanure <tanure@xxxxxxxxx>
• Re: [PATCH] i2c: imx: Implement errata ERR007805 or e7805 bus frequency limit
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH] i2c: imx: Implement errata ERR007805 or e7805 bus frequency limit
  • From: Marek Vasut <marex@xxxxxxx>
• Re: [PATCH] i2c: mediatek: Optimize master_xfer() and avoid circular locking
  • From: Nícolas F. R. A. Prado <nfraprado@xxxxxxxxxxxxx>
• Re: [PATCH 0/3] Ensure Low period of SCL is correct
  • From: Lucas Tanure <tanure@xxxxxxxxx>
• Re: [PATCH 2/3] i2c: meson: Use 50% duty cycle for I2C clock
  • From: Lucas Tanure <tanure@xxxxxxxxx>
• Re: [PATCH v6 1/4] ipmi: ssif_bmc: Add SSIF BMC driver
  • From: Quan Nguyen <quan@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2] dt-bindings: i2c: convert i2c-mt65xx to json-schema
  • From: Miles Chen <miles.chen@xxxxxxxxxxxx>
• Re: [PATCH v2] dt-bindings: i2c: convert i2c-mt65xx to json-schema
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v4 0/9] dt-bindings: qcom: convert entire GSBI (QUP I2C/SPI/UART) to DT schema
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v2] i2c: at91: use dma safe buffers
  • From: Michael Walle <michael@xxxxxxxx>
• Re: [PATCH v4] i2c: rcar: add support for I2C_M_RECV_LEN
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v4] i2c: rcar: add support for I2C_M_RECV_LEN
  • From: "Gabbasov, Andrew" <Andrew_Gabbasov@xxxxxxxxxx>
• Re: [PATCH v4] i2c: rcar: add support for I2C_M_RECV_LEN
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: at91: use dma safe buffers
  • From: <Codrin.Ciubotariu@xxxxxxxxxxxxx>
• Re: [PATCH v4] i2c: rcar: add support for I2C_M_RECV_LEN
  • From: "Gabbasov, Andrew" <Andrew_Gabbasov@xxxxxxxxxx>
• [PATCH v2] dt-bindings: i2c: convert i2c-mt65xx to json-schema
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: i2c: convert i2c-mt65xx to json-schema
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: i2c: convert i2c-mt65xx to json-schema
  • From: Miles Chen <miles.chen@xxxxxxxxxxxx>
• Re: [PATCH v4] i2c: rcar: add support for I2C_M_RECV_LEN
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2] i2c: rcar: add SMBus block read support
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [v7 1/3] dt-bindings: i2c: Add Maxim MAX735x/MAX736x variants
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v4 7/9] dt-bindings: serial: qcom,msm-uartdm: convert to dtschema
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v4] i2c: rcar: add support for I2C_M_RECV_LEN
  • From: Eugeniu Rosca <erosca@xxxxxxxxxxxxxx>
• Re: [PATCH v2] i2c: rcar: add SMBus block read support
  • From: Eugeniu Rosca <erosca@xxxxxxxxxxxxxx>
• [PATCH] dt-bindings: i2c: convert i2c-mt65xx to json-schema
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: ismt: Remove useless DMA-32 fallback configuration
  • From: Seth Heasley <seth.heasley@xxxxxxxxx>
• [PATCH] HID: mcp2221: fix hang on probe while setting up gpiochip
  • From: gavin@xxxxxxxxxxxx
• Re: [PATCH 05/11] i2c: ismt: Fix undefined behavior due to shift overflowing the constant
  • From: Seth Heasley <seth.heasley@xxxxxxxxx>
• Re: [PATCH 2/3] i2c: meson: Use 50% duty cycle for I2C clock
  • From: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
• Re: [PATCH 1/2] i2c: add binding to prevent device detection
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 1/2] i2c: add binding to prevent device detection
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [v7 3/3] i2c: muxes: pca954x: Add regulator support
  • From: Patrick Rudolph <patrick.rudolph@xxxxxxxxxxxxx>
• Re: [PATCH v3 3/9] device property: add index argument to property_read_string_array() callback
  • From: Clément Léger <clement.leger@xxxxxxxxxxx>
• Re: [PATCH] i2c: at91: use dma safe buffers
  • From: <Codrin.Ciubotariu@xxxxxxxxxxxxx>
• Re: [PATCH v3 3/9] device property: add index argument to property_read_string_array() callback
  • From: "Rafael J. Wysocki" <rafael@xxxxxxxxxx>
• [v7 2/3] i2c: muxes: pca954x: Add MAX735x/MAX736x support
  • From: Patrick Rudolph <patrick.rudolph@xxxxxxxxxxxxx>
• [PATCH 0/2] i2c: Allow disabling auto detection via devicetree
  • From: Vincent Whitchurch <vincent.whitchurch@xxxxxxxx>
• [PATCH 05/11] i2c: ismt: Fix undefined behavior due to shift overflowing the constant
  • From: Borislav Petkov <bp@xxxxxxxxx>
• Re: [PATCH 1/2] i2c: add binding to prevent device detection
  • From: Vincent Whitchurch <vincent.whitchurch@xxxxxxxx>
• Re: [PATCH 1/2] i2c: add binding to prevent device detection
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 0/3] Ensure Low period of SCL is correct
  • From: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
• [v7 0/3] Add support for Maxim MAX735x/MAX736x variants
  • From: Patrick Rudolph <patrick.rudolph@xxxxxxxxxxxxx>
• [PATCH 1/2] i2c: add binding to prevent device detection
  • From: Vincent Whitchurch <vincent.whitchurch@xxxxxxxx>
• Re: [v7 1/3] dt-bindings: i2c: Add Maxim MAX735x/MAX736x variants
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: at91: use dma safe buffers
  • From: Michael Walle <michael@xxxxxxxx>
• [PATCH 2/2] i2c: core: support no-detect property
  • From: Vincent Whitchurch <vincent.whitchurch@xxxxxxxx>
• Re: [PATCH v2 1/4] dt-bindings: I2C: Add Qualcomm Geni based QUP I2C bindings
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [v7 1/3] dt-bindings: i2c: Add Maxim MAX735x/MAX736x variants
  • From: Patrick Rudolph <patrick.rudolph@xxxxxxxxxxxxx>
• [PATCH v4] i2c: rcar: add support for I2C_M_RECV_LEN
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: at91: use dma safe buffers
  • From: Michael Walle <michael@xxxxxxxx>
• Re: [PATCH v2] i2c: rcar: add SMBus block read support
  • From: Eugeniu Rosca <erosca@xxxxxxxxxxxxxx>
• Re: [PATCH v4 6/9] spi: dt-bindings: qcom,spi-qup: convert to dtschema
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] i2c: at91: use dma safe buffers
  • From: <Codrin.Ciubotariu@xxxxxxxxxxxxx>
• Re: [PATCH v2] i2c: rcar: add SMBus block read support
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/3] i2c: meson: Use 50% duty cycle for I2C clock
  • From: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
• Re: [PATCH] i2c: at91: use dma safe buffers
  • From: <Codrin.Ciubotariu@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: at91: use dma safe buffers
  • From: Michael Walle <michael@xxxxxxxx>
• Re: [PATCH v3 09/11] i2c: npcm: Handle spurious interrupts
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v4 7/9] dt-bindings: serial: qcom,msm-uartdm: convert to dtschema
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v4 8/9] dt-bindings: i2c: qcom,i2c-qup: convert to dtschema
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v4 9/9] dt-bindings: qcom: qcom,gsbi: convert to dtschema
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v4 2/9] arm64: dts: qcom: align clocks in I2C/SPI with DT schema
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v4 6/9] spi: dt-bindings: qcom,spi-qup: convert to dtschema
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v4 5/9] ARM: dts: qcom: msm8660: disable GSBI8
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v4 4/9] ARM: dts: qcom: ipq4019: align clocks in I2C with DT schema
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v4 3/9] ARM: dts: qcom: ipq4019: align dmas in SPI/UART with DT schema
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v4 0/9] dt-bindings: qcom: convert entire GSBI (QUP I2C/SPI/UART) to DT schema
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v4 1/9] arm64: dts: qcom: align dmas in I2C/SPI/UART with DT schema
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v3 6/9] spi: dt-bindings: qcom,spi-qup: convert to dtschema
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v3 9/9] dt-bindings: qcom: qcom,gsbi: convert to dtschema
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v3 8/9] dt-bindings: i2c: qcom,i2c-qup: convert to dtschema
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 0/3] Ensure Low period of SCL is correct
  • From: Vyacheslav <adeep@xxxxxxxxx>