Re: [PATCH] i2c: at91: use dma safe buffers

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 05.04.2022 12:38, Michael Walle wrote:
> Am 2022-04-05 11:23, schrieb Codrin.Ciubotariu@xxxxxxxxxxxxx:
>>> +       if (dev->use_dma) {
>>> +               dma_buf = i2c_get_dma_safe_msg_buf(m_start, 1);
>>
>> If you want, you could just dev->buf = i2c_get_dma_safe...
> 
> But where is the error handling in that case? dev->buf will
> be NULL, which is eventually passed to dma_map_single().
> 
> Also, I need the dma_buf for the i2c_put_dma_safe_msg_buf()
> call anyway, because dev->buf will be modified during
> processing.

You still:
	if (!dev->buf) {
		ret = -ENOMEM;
		goto out;
	}

So, at91_do_twi_transfer()/dma_map_single() will not be called.

Best regards,
Codrin





[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux