Re: [RFC PATCH 11/14] ARM: dts: qcom: msm8974: add CCI bus

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This patch does not apply on upstream-media/master or
upstream-next/master. Is there another branch this series should be
applied to?

On Sun, 22 May 2022 at 18:28, Luca Weiss <luca@xxxxxxxxx> wrote:
>
> Add a node for the camera-specific i2c bus found on msm8974.
>
> Signed-off-by: Luca Weiss <luca@xxxxxxxxx>
> ---
>  arch/arm/boot/dts/qcom-msm8974.dtsi | 62 +++++++++++++++++++++++++++++
>  1 file changed, 62 insertions(+)
>
> diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi
> index ffa6f874917a..a80b4ae71745 100644
> --- a/arch/arm/boot/dts/qcom-msm8974.dtsi
> +++ b/arch/arm/boot/dts/qcom-msm8974.dtsi
> @@ -1434,6 +1434,34 @@ blsp2_i2c5_sleep: blsp2-i2c5-sleep {
>
>                         /* BLSP2_I2C6 info is missing - nobody uses it though? */
>
> +                       cci0_default: cci0-default {
> +                               pins = "gpio19", "gpio20";
> +                               function = "cci_i2c0";
> +                               drive-strength = <2>;
> +                               bias-disable;
> +                       };
> +
> +                       cci0_sleep: cci0-sleep {
> +                               pins = "gpio19", "gpio20";
> +                               function = "gpio";
> +                               drive-strength = <2>;
> +                               bias-disable;
> +                       };
> +
> +                       cci1_default: cci1-default {
> +                               pins = "gpio21", "gpio22";
> +                               function = "cci_i2c1";
> +                               drive-strength = <2>;
> +                               bias-disable;
> +                       };
> +
> +                       cci1_sleep: cci1-sleep {
> +                               pins = "gpio21", "gpio22";
> +                               function = "gpio";
> +                               drive-strength = <2>;
> +                               bias-disable;
> +                       };
> +
>                         spi8_default: spi8_default {
>                                 mosi {
>                                         pins = "gpio45";
> @@ -1587,6 +1615,40 @@ dsi0_phy: dsi-phy@fd922a00 {
>                         };
>                 };
>
> +               cci: cci@fda0c000 {
> +                       compatible = "qcom,msm8974-cci";
> +                       #address-cells = <1>;
> +                       #size-cells = <0>;
> +                       reg = <0xfda0c000 0x1000>;
> +                       interrupts = <GIC_SPI 50 IRQ_TYPE_EDGE_RISING>;
> +                       clocks = <&mmcc CAMSS_TOP_AHB_CLK>,
> +                                <&mmcc CAMSS_CCI_CCI_AHB_CLK>,
> +                                <&mmcc CAMSS_CCI_CCI_CLK>;
> +                       clock-names = "camss_top_ahb",
> +                                     "cci_ahb",
> +                                     "cci";
> +
> +                       pinctrl-names = "default", "sleep";
> +                       pinctrl-0 = <&cci0_default &cci1_default>;
> +                       pinctrl-1 = <&cci0_sleep &cci1_sleep>;
> +
> +                       status = "disabled";
> +
> +                       cci_i2c0: i2c-bus@0 {
> +                               reg = <0>;
> +                               clock-frequency = <400000>;
> +                               #address-cells = <1>;
> +                               #size-cells = <0>;
> +                       };
> +
> +                       cci_i2c1: i2c-bus@1 {
> +                               reg = <1>;
> +                               clock-frequency = <400000>;
> +                               #address-cells = <1>;
> +                               #size-cells = <0>;
> +                       };
> +               };
> +
>                 gpu: adreno@fdb00000 {
>                         compatible = "qcom,adreno-330.1", "qcom,adreno";
>                         reg = <0xfdb00000 0x10000>;
> --
> 2.36.0
>



[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux