Re: [PATCH v2 1/2] i2c: meson: Use _SHIFT and _MASK for register definitions

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 09/04/2022 18:43, Lucas Tanure wrote:
Differentiate between masks and shifts

Signed-off-by: Lucas Tanure <tanure@xxxxxxxxx>
---
  drivers/i2c/busses/i2c-meson.c | 41 ++++++++++++++++++----------------
  1 file changed, 22 insertions(+), 19 deletions(-)

diff --git a/drivers/i2c/busses/i2c-meson.c b/drivers/i2c/busses/i2c-meson.c
index 07eb819072c4..4b4a5b2d77ab 100644
--- a/drivers/i2c/busses/i2c-meson.c
+++ b/drivers/i2c/busses/i2c-meson.c
@@ -30,18 +30,21 @@
  #define REG_TOK_RDATA1		0x1c
/* Control register fields */
-#define REG_CTRL_START		BIT(0)
-#define REG_CTRL_ACK_IGNORE	BIT(1)
-#define REG_CTRL_STATUS		BIT(2)
-#define REG_CTRL_ERROR		BIT(3)
-#define REG_CTRL_CLKDIV		GENMASK(21, 12)
-#define REG_CTRL_CLKDIVEXT	GENMASK(29, 28)
-
-#define REG_SLV_ADDR		GENMASK(7, 0)
-#define REG_SLV_SDA_FILTER	GENMASK(10, 8)
-#define REG_SLV_SCL_FILTER	GENMASK(13, 11)
-#define REG_SLV_SCL_LOW		GENMASK(27, 16)
-#define REG_SLV_SCL_LOW_EN	BIT(28)
+#define REG_CTRL_START			BIT(0)
+#define REG_CTRL_ACK_IGNORE		BIT(1)
+#define REG_CTRL_STATUS			BIT(2)
+#define REG_CTRL_ERROR			BIT(3)
+#define REG_CTRL_CLKDIV_SHIFT		12
+#define REG_CTRL_CLKDIV_MASK		GENMASK(21, REG_CTRL_CLKDIV_SHIFT)
+#define REG_CTRL_CLKDIVEXT_SHIFT	28
+#define REG_CTRL_CLKDIVEXT_MASK		GENMASK(29, REG_CTRL_CLKDIVEXT_SHIFT)
+
+#define REG_SLV_ADDR_MASK		GENMASK(7, 0)
+#define REG_SLV_SDA_FILTER_MASK		GENMASK(10, 8)
+#define REG_SLV_SCL_FILTER_MASK		GENMASK(13, 11)
+#define REG_SLV_SCL_LOW_SHIFT		16
+#define REG_SLV_SCL_LOW_MASK		GENMASK(27, REG_SLV_SCL_LOW_SHIFT)
+#define REG_SLV_SCL_LOW_EN		BIT(28)
#define I2C_TIMEOUT_MS 500
  #define FILTER_DELAY		15
@@ -149,11 +152,11 @@ static void meson_i2c_set_clk_div(struct meson_i2c *i2c, unsigned int freq)
  		div = GENMASK(11, 0);
  	}
- meson_i2c_set_mask(i2c, REG_CTRL, REG_CTRL_CLKDIV,
-			   FIELD_PREP(REG_CTRL_CLKDIV, div & GENMASK(9, 0)));
+	meson_i2c_set_mask(i2c, REG_CTRL, REG_CTRL_CLKDIV_MASK,
+			   FIELD_PREP(REG_CTRL_CLKDIV_MASK, div & GENMASK(9, 0)));
- meson_i2c_set_mask(i2c, REG_CTRL, REG_CTRL_CLKDIVEXT,
-			   FIELD_PREP(REG_CTRL_CLKDIVEXT, div >> 10));
+	meson_i2c_set_mask(i2c, REG_CTRL, REG_CTRL_CLKDIVEXT_MASK,
+			   FIELD_PREP(REG_CTRL_CLKDIVEXT_MASK, div >> 10));
/* Disable HIGH/LOW mode */
  	meson_i2c_set_mask(i2c, REG_SLAVE_ADDR, REG_SLV_SCL_LOW_EN, 0);
@@ -292,8 +295,8 @@ static void meson_i2c_do_start(struct meson_i2c *i2c, struct i2c_msg *msg)
  		TOKEN_SLAVE_ADDR_WRITE;
- meson_i2c_set_mask(i2c, REG_SLAVE_ADDR, REG_SLV_ADDR,
-			   FIELD_PREP(REG_SLV_ADDR, msg->addr << 1));
+	meson_i2c_set_mask(i2c, REG_SLAVE_ADDR, REG_SLV_ADDR_MASK,
+			   FIELD_PREP(REG_SLV_ADDR_MASK, msg->addr << 1));
meson_i2c_add_token(i2c, TOKEN_START);
  	meson_i2c_add_token(i2c, token);
@@ -467,7 +470,7 @@ static int meson_i2c_probe(struct platform_device *pdev)
/* Disable filtering */
  	meson_i2c_set_mask(i2c, REG_SLAVE_ADDR,
-			   REG_SLV_SDA_FILTER | REG_SLV_SCL_FILTER, 0);
+			   REG_SLV_SDA_FILTER_MASK | REG_SLV_SCL_FILTER_MASK, 0);
meson_i2c_set_clk_div(i2c, timings.bus_freq_hz);

Reviewed-by: Neil Armstrong <narmstrong@xxxxxxxxxxxx>



[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux