[RFC PATCH 12/14] ARM: dts: qcom: msm8974: add CAMSS node

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add a node for the camera subsystem found on msm8974.

Signed-off-by: Luca Weiss <luca@xxxxxxxxx>
---
 arch/arm/boot/dts/qcom-msm8974.dtsi | 122 ++++++++++++++++++++++++++++
 1 file changed, 122 insertions(+)

diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi
index a80b4ae71745..e684a9229f8c 100644
--- a/arch/arm/boot/dts/qcom-msm8974.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8974.dtsi
@@ -1615,6 +1615,128 @@ dsi0_phy: dsi-phy@fd922a00 {
 			};
 		};
 
+		camss: camss@fda00000 {
+			compatible = "qcom,msm8974-camss";
+			reg = <0xfda0ac00 0x200>,
+			      <0xfda00030 0x4>,
+			      <0xfda0b000 0x200>,
+			      <0xfda00038 0x4>,
+			      <0xfda0b400 0x200>,
+			      <0xfda00040 0x4>,
+			      <0xfda08000 0x100>,
+			      <0xfda08400 0x100>,
+			      <0xfda08800 0x100>,
+			      <0xfda08c00 0x100>,
+			      <0xfda0a000 0x800>,
+			      <0xfda00020 0x10>,
+			      <0xfda10000 0x1000>,
+			      <0xfda14000 0x1000>;
+			reg-names = "csiphy0",
+				    "csiphy0_clk_mux",
+				    "csiphy1",
+				    "csiphy1_clk_mux",
+				    "csiphy2",
+				    "csiphy2_clk_mux",
+				    "csid0",
+				    "csid1",
+				    "csid2",
+				    "csid3",
+				    "ispif",
+				    "csi_clk_mux",
+				    "vfe0",
+				    "vfe1";
+			interrupts = <GIC_SPI 78 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 79 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 80 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 51 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 52 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 53 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 54 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 55 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 57 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 58 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "csiphy0",
+					  "csiphy1",
+					  "csiphy2",
+					  "csid0",
+					  "csid1",
+					  "csid2",
+					  "csid3",
+					  "ispif",
+					  "vfe0",
+					  "vfe1";
+			power-domains = <&mmcc CAMSS_VFE_GDSC>;
+			clocks = <&mmcc CAMSS_TOP_AHB_CLK>,
+				 <&mmcc CAMSS_ISPIF_AHB_CLK>,
+				 <&mmcc CAMSS_PHY0_CSI0PHYTIMER_CLK>,
+				 <&mmcc CAMSS_PHY1_CSI1PHYTIMER_CLK>,
+				 <&mmcc CAMSS_PHY2_CSI2PHYTIMER_CLK>,
+				 <&mmcc CAMSS_CSI0_AHB_CLK>,
+				 <&mmcc CAMSS_CSI0_CLK>,
+				 <&mmcc CAMSS_CSI0PHY_CLK>,
+				 <&mmcc CAMSS_CSI0PIX_CLK>,
+				 <&mmcc CAMSS_CSI0RDI_CLK>,
+				 <&mmcc CAMSS_CSI1_AHB_CLK>,
+				 <&mmcc CAMSS_CSI1_CLK>,
+				 <&mmcc CAMSS_CSI1PHY_CLK>,
+				 <&mmcc CAMSS_CSI1PIX_CLK>,
+				 <&mmcc CAMSS_CSI1RDI_CLK>,
+				 <&mmcc CAMSS_CSI2_AHB_CLK>,
+				 <&mmcc CAMSS_CSI2_CLK>,
+				 <&mmcc CAMSS_CSI2PHY_CLK>,
+				 <&mmcc CAMSS_CSI2PIX_CLK>,
+				 <&mmcc CAMSS_CSI2RDI_CLK>,
+				 <&mmcc CAMSS_CSI3_AHB_CLK>,
+				 <&mmcc CAMSS_CSI3_CLK>,
+				 <&mmcc CAMSS_CSI3PHY_CLK>,
+				 <&mmcc CAMSS_CSI3PIX_CLK>,
+				 <&mmcc CAMSS_CSI3RDI_CLK>,
+				 <&mmcc CAMSS_VFE_VFE0_CLK>,
+				 <&mmcc CAMSS_VFE_VFE1_CLK>,
+				 <&mmcc CAMSS_CSI_VFE0_CLK>,
+				 <&mmcc CAMSS_CSI_VFE1_CLK>,
+				 <&mmcc CAMSS_VFE_VFE_AHB_CLK>,
+				 <&mmcc CAMSS_VFE_VFE_AXI_CLK>;
+			clock-names = "top_ahb",
+				      "ispif_ahb",
+				      "csiphy0_timer",
+				      "csiphy1_timer",
+				      "csiphy2_timer",
+				      "csi0_ahb",
+				      "csi0",
+				      "csi0_phy",
+				      "csi0_pix",
+				      "csi0_rdi",
+				      "csi1_ahb",
+				      "csi1",
+				      "csi1_phy",
+				      "csi1_pix",
+				      "csi1_rdi",
+				      "csi2_ahb",
+				      "csi2",
+				      "csi2_phy",
+				      "csi2_pix",
+				      "csi2_rdi",
+				      "csi3_ahb",
+				      "csi3",
+				      "csi3_phy",
+				      "csi3_pix",
+				      "csi3_rdi",
+				      "vfe0",
+				      "vfe1",
+				      "csi_vfe0",
+				      "csi_vfe1",
+				      "iface",
+				      "bus";
+
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
 		cci: cci@fda0c000 {
 			compatible = "qcom,msm8974-cci";
 			#address-cells = <1>;
-- 
2.36.0




[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux