[PATCH 2/4] i2c: xiic: Fix coding style issues

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Michal Simek <michal.simek@xxxxxxxxxx>

Most of these stuff are reported by checkpatch.
But fixes are:
- Incorrect indetation
- Missing blank line after variable declaration
- Additional ()
- Missing spaces around +
- Missing parenthesis when if has them
- Newlines
- Remove MODULE_ALIAS - none is really using it

Signed-off-by: Michal Simek <michal.simek@xxxxxxxxxx>
Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xxxxxxxxxx>
---
 drivers/i2c/busses/i2c-xiic.c | 37 +++++++++++++++++++----------------
 1 file changed, 20 insertions(+), 17 deletions(-)

diff --git a/drivers/i2c/busses/i2c-xiic.c b/drivers/i2c/busses/i2c-xiic.c
index 8b39f9c7e773..16a7e3164e68 100644
--- a/drivers/i2c/busses/i2c-xiic.c
+++ b/drivers/i2c/busses/i2c-xiic.c
@@ -78,24 +78,23 @@ struct xiic_i2c {
 	bool singlemaster;
 };
 
-
 #define XIIC_MSB_OFFSET 0
-#define XIIC_REG_OFFSET (0x100+XIIC_MSB_OFFSET)
+#define XIIC_REG_OFFSET (0x100 + XIIC_MSB_OFFSET)
 
 /*
  * Register offsets in bytes from RegisterBase. Three is added to the
  * base offset to access LSB (IBM style) of the word
  */
-#define XIIC_CR_REG_OFFSET   (0x00+XIIC_REG_OFFSET)	/* Control Register   */
-#define XIIC_SR_REG_OFFSET   (0x04+XIIC_REG_OFFSET)	/* Status Register    */
-#define XIIC_DTR_REG_OFFSET  (0x08+XIIC_REG_OFFSET)	/* Data Tx Register   */
-#define XIIC_DRR_REG_OFFSET  (0x0C+XIIC_REG_OFFSET)	/* Data Rx Register   */
-#define XIIC_ADR_REG_OFFSET  (0x10+XIIC_REG_OFFSET)	/* Address Register   */
-#define XIIC_TFO_REG_OFFSET  (0x14+XIIC_REG_OFFSET)	/* Tx FIFO Occupancy  */
-#define XIIC_RFO_REG_OFFSET  (0x18+XIIC_REG_OFFSET)	/* Rx FIFO Occupancy  */
-#define XIIC_TBA_REG_OFFSET  (0x1C+XIIC_REG_OFFSET)	/* 10 Bit Address reg */
-#define XIIC_RFD_REG_OFFSET  (0x20+XIIC_REG_OFFSET)	/* Rx FIFO Depth reg  */
-#define XIIC_GPO_REG_OFFSET  (0x24+XIIC_REG_OFFSET)	/* Output Register    */
+#define XIIC_CR_REG_OFFSET   (0x00 + XIIC_REG_OFFSET)	/* Control Register   */
+#define XIIC_SR_REG_OFFSET   (0x04 + XIIC_REG_OFFSET)	/* Status Register    */
+#define XIIC_DTR_REG_OFFSET  (0x08 + XIIC_REG_OFFSET)	/* Data Tx Register   */
+#define XIIC_DRR_REG_OFFSET  (0x0C + XIIC_REG_OFFSET)	/* Data Rx Register   */
+#define XIIC_ADR_REG_OFFSET  (0x10 + XIIC_REG_OFFSET)	/* Address Register   */
+#define XIIC_TFO_REG_OFFSET  (0x14 + XIIC_REG_OFFSET)	/* Tx FIFO Occupancy  */
+#define XIIC_RFO_REG_OFFSET  (0x18 + XIIC_REG_OFFSET)	/* Rx FIFO Occupancy  */
+#define XIIC_TBA_REG_OFFSET  (0x1C + XIIC_REG_OFFSET)	/* 10 Bit Address reg */
+#define XIIC_RFD_REG_OFFSET  (0x20 + XIIC_REG_OFFSET)	/* Rx FIFO Depth reg  */
+#define XIIC_GPO_REG_OFFSET  (0x24 + XIIC_REG_OFFSET)	/* Output Register    */
 
 /* Control Register masks */
 #define XIIC_CR_ENABLE_DEVICE_MASK        0x01	/* Device enable = 1      */
@@ -233,18 +232,21 @@ static inline int xiic_getreg32(struct xiic_i2c *i2c, int reg)
 static inline void xiic_irq_dis(struct xiic_i2c *i2c, u32 mask)
 {
 	u32 ier = xiic_getreg32(i2c, XIIC_IIER_OFFSET);
+
 	xiic_setreg32(i2c, XIIC_IIER_OFFSET, ier & ~mask);
 }
 
 static inline void xiic_irq_en(struct xiic_i2c *i2c, u32 mask)
 {
 	u32 ier = xiic_getreg32(i2c, XIIC_IIER_OFFSET);
+
 	xiic_setreg32(i2c, XIIC_IIER_OFFSET, ier | mask);
 }
 
 static inline void xiic_irq_clr(struct xiic_i2c *i2c, u32 mask)
 {
 	u32 isr = xiic_getreg32(i2c, XIIC_IISR_OFFSET);
+
 	xiic_setreg32(i2c, XIIC_IISR_OFFSET, isr & mask);
 }
 
@@ -355,7 +357,8 @@ static void xiic_fill_tx_fifo(struct xiic_i2c *i2c)
 
 	while (len--) {
 		u16 data = i2c->tx_msg->buf[i2c->tx_pos++];
-		if ((xiic_tx_space(i2c) == 0) && (i2c->nmsgs == 1)) {
+
+		if (!xiic_tx_space(i2c) && i2c->nmsgs == 1) {
 			/* last message in transfer -> STOP */
 			data |= XIIC_TX_DYN_STOP_MASK;
 			dev_dbg(i2c->adap.dev.parent, "%s TX STOP\n", __func__);
@@ -402,8 +405,8 @@ static irqreturn_t xiic_process(int irq, void *dev_id)
 
 	/* Service requesting interrupt */
 	if ((pend & XIIC_INTR_ARB_LOST_MASK) ||
-		((pend & XIIC_INTR_TX_ERROR_MASK) &&
-		!(pend & XIIC_INTR_RX_FULL_MASK))) {
+	    ((pend & XIIC_INTR_TX_ERROR_MASK) &&
+	    !(pend & XIIC_INTR_RX_FULL_MASK))) {
 		/* bus arbritration lost, or...
 		 * Transmit error _OR_ RX completed
 		 * if this happens when RX_FULL is not set
@@ -641,6 +644,7 @@ static void xiic_start_send(struct xiic_i2c *i2c)
 static void __xiic_start_xfer(struct xiic_i2c *i2c)
 {
 	int fifo_space = xiic_tx_fifo_space(i2c);
+
 	dev_dbg(i2c->adap.dev.parent, "%s entry, msg: %p, fifos space: %d\n",
 		__func__, i2c->tx_msg, fifo_space);
 
@@ -742,7 +746,6 @@ static const struct i2c_adapter xiic_adapter = {
 	.quirks = &xiic_quirks,
 };
 
-
 static int xiic_i2c_probe(struct platform_device *pdev)
 {
 	struct xiic_i2c *i2c;
@@ -902,6 +905,7 @@ static const struct dev_pm_ops xiic_dev_pm_ops = {
 	SET_RUNTIME_PM_OPS(xiic_i2c_runtime_suspend,
 			   xiic_i2c_runtime_resume, NULL)
 };
+
 static struct platform_driver xiic_i2c_driver = {
 	.probe   = xiic_i2c_probe,
 	.remove  = xiic_i2c_remove,
@@ -917,4 +921,3 @@ module_platform_driver(xiic_i2c_driver);
 MODULE_AUTHOR("info@xxxxxxxxxxxxxxx");
 MODULE_DESCRIPTION("Xilinx I2C bus driver");
 MODULE_LICENSE("GPL v2");
-MODULE_ALIAS("platform:"DRIVER_NAME);
-- 
2.17.1




[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux