Linux Kernel I2C

• Thread Index

• Re: [RESEND PATCH 0/9] arm64: bcmbca: Move BCM4908 SoC support under ARCH_BCMBCA
  • From: Florian Fainelli <f.fainelli@xxxxxxxxx>
• Re: [RESEND PATCH 0/9] arm64: bcmbca: Move BCM4908 SoC support under ARCH_BCMBCA
  • From: Florian Fainelli <f.fainelli@xxxxxxxxx>
• [i2c] 5c7b9167dd: BUG:KASAN:use-after-free_in_string
  • From: kernel test robot <oliver.sang@xxxxxxxxx>
• [RESEND PATCH 6/9] arm64: bcmbca: Make BCM4908 drivers depend on ARCH_BCMBCA
  • From: William Zhang <william.zhang@xxxxxxxxxxxx>
• [RESEND PATCH 0/9] arm64: bcmbca: Move BCM4908 SoC support under ARCH_BCMBCA
  • From: William Zhang <william.zhang@xxxxxxxxxxxx>
• [PATCH 6/9] arm64: bcmbca: Make BCM4908 drivers depend on ARCH_BCMBCA
  • From: William Zhang <william.zhang@xxxxxxxxxxxx>
• [PATCH 0/9] arm64: bcmbca: Move BCM4908 SoC support under ARCH_BCMBCA
  • From: William Zhang <william.zhang@xxxxxxxxxxxx>
• Re: [PATCH v3] i2c: i801: Safely share SMBus with BIOS/ACPI
  • From: Ettore Chimenti <ek5.chimenti@xxxxxxxxx>
• Re: [PATCH] i2c: Use u8 type in i2c transfer calls
  • From: Jason Gerecke <killertofu@xxxxxxxxx>
• [PATCH] i2c: imx: Make sure to unregister adapter on remove()
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH 16/17] arm64: dts: mediatek: add mt8365 device-tree
  • From: Amjad Ouled-Ameur <aouledameur@xxxxxxxxxxxx>
• [PATCH 1/2] i2c: tegra: Add GPCDMA support
  • From: Akhil R <akhilrajeev@xxxxxxxxxx>
• [PATCH 2/2] arm64: tegra: Add GPCDMA support for Tegra234 I2C
  • From: Akhil R <akhilrajeev@xxxxxxxxxx>
• [PATCH 0/2] Add GPCDMA support to Tegra234 I2C
  • From: Akhil R <akhilrajeev@xxxxxxxxxx>
• Re: [PATCH 01/12] i2c: xiic: Add standard mode support for > 255 byte read transfers
  • From: Krzysztof Adamski <krzysztof.adamski@xxxxxxxxx>
• Re: [PATCH 1/3] i2c: qcom-geni: Use the correct return value
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH] i2c: Use u8 type in i2c transfer calls
  • From: kernel test robot <rong.a.chen@xxxxxxxxx>
• Re: [PATCH 2/3] i2c: qcom-geni: Propagate GENI_ABORT_DONE to geni_i2c_abort_xfer()
  • From: Andrew Halaney <ahalaney@xxxxxxxxxx>
• Re: [PATCH 2/3] i2c: qcom-geni: Propagate GENI_ABORT_DONE to geni_i2c_abort_xfer()
  • From: Andrew Halaney <ahalaney@xxxxxxxxxx>
• Re: [PATCH 1/3] i2c: qcom-geni: Use the correct return value
  • From: Andrew Halaney <ahalaney@xxxxxxxxxx>
• Re: [PATCH] i2c: cadence: Support PEC for SMBus block read
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH] i2c: brcmstb: Fixed adapter named with optional interrupts
  • From: Florian Fainelli <f.fainelli@xxxxxxxxx>
• [PATCH] i2c: brcmstb: Use dev_name() for adapter name
  • From: Florian Fainelli <f.fainelli@xxxxxxxxx>
• Re: [PATCH] i2c: brcmstb: Fixed adapter named with optional interrupts
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH] i2c: brcmstb: Fixed adapter named with optional interrupts
  • From: Florian Fainelli <f.fainelli@xxxxxxxxx>
• Re: [PATCH 1/3] i2c: qcom-geni: Use the correct return value
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• [PATCH] i2c: Use u8 type in i2c transfer calls
  • From: Jason Gerecke <killertofu@xxxxxxxxx>
• RE: [PATCH] i2c: cadence: Support PEC for SMBus block read
  • From: "Datta, Shubhrajyoti" <shubhrajyoti.datta@xxxxxxx>
• Re: [PATCH] i2c: cadence: Support PEC for SMBus block read
  • From: Michal Simek <michal.simek@xxxxxxx>
• RE: [PATCH] i2c: cadence: Support PEC for SMBus block read
  • From: "Datta, Shubhrajyoti" <shubhrajyoti.datta@xxxxxxx>
• Re: [PATCH v6 00/12] platform/x86: introduce p2sb_bar() helper
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: cadence: Support PEC for SMBus block read
  • From: Michal Simek <michal.simek@xxxxxxx>
• Re: [PATCH 3/3] i2c: qcom-geni: Silence NACK and GENI_TIMEOUT
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH 2/3] i2c: qcom-geni: Propagate GENI_ABORT_DONE to geni_i2c_abort_xfer()
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH 1/3] i2c: qcom-geni: Use the correct return value
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH 0/6] i2c: Make remove callback return void
  • From: Krzysztof Hałasa <khalasa@xxxxxxx>
• [PATCH] i2c: cadence: Support PEC for SMBus block read
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH v6 00/12] platform/x86: introduce p2sb_bar() helper
  • From: Pavel Machek <pavel@xxxxxx>
• [PATCH 0/3] i2c: qcom-geni: Make it possible to run i2cdetect
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• [PATCH 1/3] i2c: qcom-geni: Use the correct return value
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• [PATCH 3/3] i2c: qcom-geni: Silence NACK and GENI_TIMEOUT
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• [PATCH 2/3] i2c: qcom-geni: Propagate GENI_ABORT_DONE to geni_i2c_abort_xfer()
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH 0/6] i2c: Make remove callback return void
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH i2c-next 1/1] i2c: mlxcpld: Add callback to notify probing completion
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH] i2c: cadence: Change large transfer count reset logic to be unconditional
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH] i2c: cadence: Change large transfer count reset logic to be unconditional
  • From: "wsa@xxxxxxxxxx" <wsa@xxxxxxxxxx>
• Re: [PATCH] i2c: brcmstb: Fixed adapter named with optional interrupts
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v3 1/1] i2c: scmi: Replace open coded device_get_match_data()
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: i2c: st,stm32-i2c: add entry for stm32mp13
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v2 2/2] i2c: stm32: add support for the STM32MP13 soc
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH i2c 1/1] i2c: mlxcpld: Fix register setting for 400KHz frequency
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v2] i2c: imx: fix typo in comment
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• [PATCH v2] i2c: imx: fix typo in comment
  • From: Flavio Suligoi <f.suligoi@xxxxxxx>
• Re: [PATCH v1] 2c: imx: fix typo in comment
  • From: Fabio Estevam <festevam@xxxxxxxxx>
• [PATCH v1] 2c: imx: fix typo in comment
  • From: Flavio Suligoi <f.suligoi@xxxxxxx>
• Re: [PATCH v1] i2c: imx: Retry transfer on transient failure
  • From: Francesco Dolcini <francesco.dolcini@xxxxxxxxxxx>
• Re: [PATCH v1] i2c: imx: Retry transfer on transient failure
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH v1] i2c: imx: Retry transfer on transient failure
  • From: Francesco Dolcini <francesco.dolcini@xxxxxxxxxxx>
• Re: [PATCH v1] i2c: imx: Retry transfer on transient failure
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH v3 4/4] riscv: dts: sifive: "fix" pmic watchdog node name
  • From: Palmer Dabbelt <palmer@xxxxxxxxxxx>
• Re: [PATCH] i2c: cadence: Change large transfer count reset logic to be unconditional
  • From: Michal Simek <michal.simek@xxxxxxx>
• Re: [PATCH v6 00/12] platform/x86: introduce p2sb_bar() helper
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• RE: [PATCH] i2c: cadence: Change large transfer count reset logic to be unconditional
  • From: "Datta, Shubhrajyoti" <shubhrajyoti.datta@xxxxxxx>
• Re: [PATCH v6 00/12] platform/x86: introduce p2sb_bar() helper
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH v6 00/12] platform/x86: introduce p2sb_bar() helper
  • From: Henning Schild <henning.schild@xxxxxxxxxxx>
• Re: [PATCH v6 00/12] platform/x86: introduce p2sb_bar() helper
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v6 00/12] platform/x86: introduce p2sb_bar() helper
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v6 00/12] platform/x86: introduce p2sb_bar() helper
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v1] i2c: imx: Retry transfer on transient failure
  • From: Francesco Dolcini <francesco.dolcini@xxxxxxxxxxx>
• RE: [PATCH v2] i2c: cadence: Add standard bus recovery support
  • From: "Datta, Shubhrajyoti" <shubhrajyoti.datta@xxxxxxx>
• Re: [PATCH v1] i2c: imx: Retry transfer on transient failure
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• Re: [PATCH v1] i2c: imx: Retry transfer on transient failure
  • From: Francesco Dolcini <francesco.dolcini@xxxxxxxxxxx>
• Re: [PATCH v6 00/12] platform/x86: introduce p2sb_bar() helper
  • From: Henning Schild <henning.schild@xxxxxxxxxxx>
• Re: [PATCH v6 00/12] platform/x86: introduce p2sb_bar() helper
  • From: "Rafael J. Wysocki" <rafael@xxxxxxxxxx>
• Re: [PATCH v6 00/12] platform/x86: introduce p2sb_bar() helper
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v1] i2c: imx: Retry transfer on transient failure
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• Re: [PATCH v1] i2c: imx: Retry transfer on transient failure
  • From: Francesco Dolcini <francesco.dolcini@xxxxxxxxxxx>
• Re: [PATCH v1] i2c: imx: Retry transfer on transient failure
  • From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
• Re: [PATCH v1] i2c: imx: Retry transfer on transient failure
  • From: Francesco Dolcini <francesco.dolcini@xxxxxxxxxxx>
• [PATCH i2c 1/1] i2c: mlxcpld: Fix register setting for 400KHz frequency
  • From: Vadim Pasternak <vadimp@xxxxxxxxxx>
• [PATCH i2c-next 1/1] i2c: mlxcpld: Add callback to notify probing completion
  • From: Vadim Pasternak <vadimp@xxxxxxxxxx>
• RE: [PATCH 12/12] i2c: xiic: Correct the BNB interrupt enable sequence
  • From: "Guntupalli, Manikanta" <manikanta.guntupalli@xxxxxxx>
• RE: [PATCH 01/12] i2c: xiic: Add standard mode support for > 255 byte read transfers
  • From: "Guntupalli, Manikanta" <manikanta.guntupalli@xxxxxxx>
• Re: [PATCHv6 1/2] i2c: designware: introduce a custom scl recovery for SoCFPGA platforms
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCHv6 1/2] i2c: designware: introduce a custom scl recovery for SoCFPGA platforms
  • From: Dinh Nguyen <dinguyen@xxxxxxxxxx>
• Re: [PATCHv6 1/2] i2c: designware: introduce a custom scl recovery for SoCFPGA platforms
  • From: Dinh Nguyen <dinguyen@xxxxxxxxxx>
• Re: [PATCH v1] i2c: imx: Retry transfer on transient failure
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• Re: [PATCH v1] i2c: imx: Retry transfer on transient failure
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v1] i2c: imx: Retry transfer on transient failure
  • From: Francesco Dolcini <francesco.dolcini@xxxxxxxxxxx>
• Re: [PATCH v1] i2c: imx: Retry transfer on transient failure
  • From: Francesco Dolcini <francesco.dolcini@xxxxxxxxxxx>
• Re: [PATCH v1] i2c: imx: Retry transfer on transient failure
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH v1] i2c: imx: Retry transfer on transient failure
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• [PATCH v1] i2c: imx: Retry transfer on transient failure
  • From: Francesco Dolcini <francesco.dolcini@xxxxxxxxxxx>
• Re: [RESEND v4 1/2] dt-bindings: i2c: update bindings for MT8188 SoC
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PULL REQUEST] i2c-for-5.19-rc6
  • From: pr-tracker-bot@xxxxxxxxxx
• [PULL REQUEST] i2c-for-5.19-rc6
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v2 2/2] i2c: Introduce i2c_str_read_write() and make use of it
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2 2/2] i2c: Introduce i2c_str_read_write() and make use of it
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: i2c: st,stm32-i2c: add entry for stm32mp13
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v1 1/5] ACPI: utils: Introduce acpi_match_video_device_handle() helper
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v1 1/5] ACPI: utils: Introduce acpi_match_video_device_handle() helper
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [RESEND PATCH 5/8] i2c: brcmstb: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA
  • From: Florian Fainelli <f.fainelli@xxxxxxxxx>
• Re: [PATCH v2 2/2] i2c: Introduce i2c_str_read_write() and make use of it
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH v3 1/1] i2c: scmi: Replace open coded device_get_match_data()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/1] i2c: scmi: Replace open coded device_get_match_data()
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v2 1/1] i2c: scmi: Replace open coded device_get_match_data()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] i2c: Introduce i2c_str_read_write() and make use of it
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v4 2/2] i2c: Add Renesas RZ/V2M controller
  • From: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>
• Re: [PATCH v2 1/1] i2c: scmi: Replace open coded device_get_match_data()
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v4 2/2] i2c: Add Renesas RZ/V2M controller
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] i2c: Introduce i2c_str_read_write() and make use of it
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v4 1/2] dt-bindings: i2c: Document RZ/V2M I2C controller
  • From: Phil Edworthy <phil.edworthy@xxxxxxxxxxx>
• [PATCH v4 0/2] i2c: Add new driver for Renesas RZ/V2M controller
  • From: Phil Edworthy <phil.edworthy@xxxxxxxxxxx>
• Re: [PATCH v1 1/1] i2c: scmi: Replace open coded acpi_match_device()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 1/1] i2c: scmi: Replace open coded device_get_match_data()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v4 2/2] i2c: Add Renesas RZ/V2M controller
  • From: Phil Edworthy <phil.edworthy@xxxxxxxxxxx>
• Re: [RESEND v4 2/2] i2c: mediatek: Add i2c compatible for Mediatek MT8188
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• Re: [RESEND v4 1/2] dt-bindings: i2c: update bindings for MT8188 SoC
  • From: Matthias Brugger <matthias.bgg@xxxxxxxxx>
• Re: [RESEND v4 2/2] i2c: mediatek: Add i2c compatible for Mediatek MT8188
  • From: Matthias Brugger <matthias.bgg@xxxxxxxxx>
• Re: [PATCH v3 2/2] i2c: Add Renesas RZ/V2M controller
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• [RESEND v4 2/2] i2c: mediatek: Add i2c compatible for Mediatek MT8188
  • From: <kewei.xu@xxxxxxxxxxxx>
• [RESEND v4 1/2] dt-bindings: i2c: update bindings for MT8188 SoC
  • From: <kewei.xu@xxxxxxxxxxxx>
• [PATCH 1/2] dt-bindings: i2c: update bindings for MT8188 SoC
  • From: <kewei.xu@xxxxxxxxxxxx>
• [PATCH 2/2] i2c: mediatek: Add i2c compatible for Mediatek MT8188
  • From: <kewei.xu@xxxxxxxxxxxx>
• [PATCH 1/2] dt-bindings: i2c: update bindings for MT8188 SoC
  • From: Kewei Xu <kewei.xu@xxxxxxxxxxxx>
• [PATCH V2 0/2] add i2c support for mt8188
  • From: Kewei Xu <kewei.xu@xxxxxxxxxxxx>
• [PATCH 2/2] i2c: mediatek: Add i2c compatible for Mediatek MT8188
  • From: Kewei Xu <kewei.xu@xxxxxxxxxxxx>
• Re: [PATCH 2/2] i2c: mediatek: Add i2c compatible for Mediatek MT8188
  • From: Kewei Xu <kewei.xu@xxxxxxxxxxxx>
• Re: [EXT] Re: [PATCH] i2c: cadence: Unregister the clk notifier in error path
  • From: Satish Nagireddy <satish.nagireddy@xxxxxxxxxxxxx>
• Re: [PATCH v2] i2c: cadence: Add standard bus recovery support
  • From: Robert Hancock <robert.hancock@xxxxxxxxxx>
• Re: [PATCH v7 1/2] i2c: add support for microchip fpga i2c controllers
  • From: <Conor.Dooley@xxxxxxxxxxxxx>
• Re: [PATCH 1/1] dt-bindings: i2c: i2c-rk3x: add rk3588 compatible
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH] i2c: cadence: Unregister the clk notifier in error path
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v2] i2c: cadence: Add standard bus recovery support
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v7 1/2] i2c: add support for microchip fpga i2c controllers
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [RESEND PATCH 5/8] i2c: brcmstb: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• RE: [PATCH v3 2/2] i2c: Add Renesas RZ/V2M controller
  • From: Phil Edworthy <phil.edworthy@xxxxxxxxxxx>
• Re: [PATCH v3 2/2] i2c: Add Renesas RZ/V2M controller
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• RE: [PATCH v3 2/2] i2c: Add Renesas RZ/V2M controller
  • From: Phil Edworthy <phil.edworthy@xxxxxxxxxxx>
• Re: [RESEND PATCH 5/8] i2c: brcmstb: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA
  • From: Florian Fainelli <f.fainelli@xxxxxxxxx>
• Re: [PATCH V1 1/2] dt-bindings: i2c: update bindings for MT8188 SoC
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• Re: [PATCH 2/2] i2c: mediatek: Add i2c compatible for Mediatek MT8188
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: cadence: Unregister the clk notifier in error path
  • From: Michal Simek <michal.simek@xxxxxxxxxx>
• [PATCH v2 0/2] i2c: stm32: addition of STM32MP13 support
  • From: Alain Volmat <alain.volmat@xxxxxxxxxxx>
• [PATCH v2 2/2] i2c: stm32: add support for the STM32MP13 soc
  • From: Alain Volmat <alain.volmat@xxxxxxxxxxx>
• [PATCH v2 1/2] dt-bindings: i2c: st,stm32-i2c: add entry for stm32mp13
  • From: Alain Volmat <alain.volmat@xxxxxxxxxxx>
• RE: [PATCH v3 2/2] i2c: Add Renesas RZ/V2M controller
  • From: Phil Edworthy <phil.edworthy@xxxxxxxxxxx>
• [RESEND PATCH 5/8] i2c: brcmstb: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA
  • From: William Zhang <william.zhang@xxxxxxxxxxxx>
• Re: [PATCH 1/4] dt-bindings: i2c: st,stm32-i2c: don't mandate a reset line
  • From: Alain Volmat <alain.volmat@xxxxxxxxxxx>
• [PATCH 2/2] i2c: mediatek: Add i2c compatible for Mediatek MT8188
  • From: Kewei Xu <kewei.xu@xxxxxxxxxxxx>
• [PATCH V1 0/2] add i2c support for mt8188
  • From: Kewei Xu <kewei.xu@xxxxxxxxxxxx>
• [PATCH V1 1/2] dt-bindings: i2c: update bindings for MT8188 SoC
  • From: Kewei Xu <kewei.xu@xxxxxxxxxxxx>
• Re: [PATCH 1/1] dt-bindings: i2c: i2c-rk3x: add rk3588 compatible
  • From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx>
• Re: [PATCH 1/4] dt-bindings: i2c: st,stm32-i2c: don't mandate a reset line
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v7 1/2] i2c: add support for microchip fpga i2c controllers
  • From: <Conor.Dooley@xxxxxxxxxxxxx>
• Re: [PATCH 1/1] dt-bindings: i2c: i2c-rk3x: add rk3588 compatible
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 1/1] dt-bindings: i2c: i2c-rk3x: add rk3588 compatible
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v1 1/1] i2c: scmi: Replace open coded acpi_match_device()
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: i2c: mv64xxx: Add variants with offload support
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v7 1/2] i2c: add support for microchip fpga i2c controllers
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• [PATCH] i2c: brcmstb: Fixed adapter named with optional interrupts
  • From: Florian Fainelli <f.fainelli@xxxxxxxxx>
• Re: [PATCH 5/9] arm: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• [PATCH v7 2/2] MAINTAINERS: add the polarfire soc's i2c driver
  • From: Conor Dooley <conor.dooley@xxxxxxxxxxxxx>
• [PATCH v7 1/2] i2c: add support for microchip fpga i2c controllers
  • From: Conor Dooley <conor.dooley@xxxxxxxxxxxxx>
• Re: [PATCH v2] i2c: i801: Add support for Intel Meteor Lake-P
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: i2c: Drop unused voltage supply from example
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: i2c: Add power domain to binding
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: i2c: Drop unused voltage supply from example
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v1 3/5] i2c: acpi: Convert to use acpi_match_video_device_handle() helper
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v2 2/2] i2c: Introduce i2c_str_read_write() and make use of it
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v6 1/2] i2c: add support for microchip fpga i2c controllers
  • From: <Conor.Dooley@xxxxxxxxxxxxx>
• Re: [PATCH v6 1/2] i2c: add support for microchip fpga i2c controllers
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH 6/6] i2c: Make remove callback return void
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH 6/6] i2c: Make remove callback return void
  • From: Vladimir Oltean <olteanv@xxxxxxxxx>
• Re: [PATCH v6 1/2] i2c: add support for microchip fpga i2c controllers
  • From: <Conor.Dooley@xxxxxxxxxxxxx>
• Re: [PATCH v6 2/2] MAINTAINERS: add the polarfire soc's i2c driver
  • From: <Conor.Dooley@xxxxxxxxxxxxx>
• Re: [PATCH v6 2/2] MAINTAINERS: add the polarfire soc's i2c driver
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v6 1/2] i2c: add support for microchip fpga i2c controllers
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH 5/9] arm: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA
  • From: Damien Le Moal <damien.lemoal@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: i2c: mv64xxx: Add variants with offload support
  • From: Jernej Škrabec <jernej.skrabec@xxxxxxxxx>
• Re: Re: [PATCH 2/2] arm64: dts: allwinner: a100: Update I2C controller fallback
  • From: Jernej Škrabec <jernej.skrabec@xxxxxxxxx>
• Re: [PATCH 2/2] arm64: dts: allwinner: a100: Update I2C controller fallback
  • From: Jernej Škrabec <jernej.skrabec@xxxxxxxxx>
• Re: [PATCH 5/9] arm: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v1 1/5] ACPI: utils: Introduce acpi_match_video_device_handle() helper
  • From: "Rafael J. Wysocki" <rafael@xxxxxxxxxx>
• [PATCH 5/9] arm: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA
  • From: William Zhang <william.zhang@xxxxxxxxxxxx>
• [PATCH 0/9] arm: bcmbca: Move BCM63138 SoC support under ARCH_BCMBCA
  • From: William Zhang <william.zhang@xxxxxxxxxxxx>
• Re: [PATCH v2] i2c: i801: Add support for Intel Meteor Lake-P
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH 1/2] dt-bindings: i2c: mv64xxx: Add variants with offload support
  • From: Andre Przywara <andre.przywara@xxxxxxx>
• Re: [PATCH 6/6] i2c: Make remove callback return void
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH 6/6] i2c: Make remove callback return void
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH v7 3/3] i2c: aspeed: Assert NAK when slave is busy
  • From: Quan Nguyen <quan@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 4/4] riscv: dts: sifive: "fix" pmic watchdog node name
  • From: <Conor.Dooley@xxxxxxxxxxxxx>
• Re: [PATCH v2] i2c: cadence: Add standard bus recovery support
  • From: Michal Simek <michal.simek@xxxxxxx>
• RE: [PATCH v1 2/2] i2c: Introduce i2c_str_read_write() and make use of it
  • From: David Laight <David.Laight@xxxxxxxxxx>
• Re: [PATCH v6 1/4] mfd: ch341: add core driver for the WCH CH341 in I2C/SPI/GPIO mode
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 0/6] i2c: Make remove callback return void
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: i2c: mv64xxx: Add variants with offload support
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v2] i2c: cadence: Add standard bus recovery support
  • From: Shubhrajyoti Datta <shubhrajyoti.datta@xxxxxxxxxx>
• RE: [PATCH v2 03/10] i2c: xiic: Switch to Xiic standard mode for i2c-read
  • From: "Datta, Shubhrajyoti" <shubhrajyoti.datta@xxxxxxx>
• [PATCH v2 1/2] lib/string_helpers: Add str_read_write() helper
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 2/2] i2c: Introduce i2c_str_read_write() and make use of it
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 2/2] i2c: Add Renesas RZ/V2M controller
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 2/2] i2c: Add Renesas RZ/V2M controller
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v1 2/2] i2c: Introduce i2c_str_read_write() and make use of it
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v1 2/2] i2c: Introduce i2c_str_read_write() and make use of it
  • From: kernel test robot <lkp@xxxxxxxxx>
• [PATCH v1 2/2] i2c: Introduce i2c_str_read_write() and make use of it
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 1/2] lib/string_helpers: Add str_read_write() helper
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 2/2] i2c: Add Renesas RZ/V2M controller
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH 2/2] arm64: dts: allwinner: a100: Update I2C controller fallback
  • From: Samuel Holland <samuel@xxxxxxxxxxxx>
• [PATCH 1/2] dt-bindings: i2c: mv64xxx: Add variants with offload support
  • From: Samuel Holland <samuel@xxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: i2c: Drop unused voltage supply from example
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: i2c: Add power domain to binding
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH] dt-bindings: i2c: Add power domain to binding
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: i2c: Rewrite Nomadik I2C bindings in YAML
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH] dt-bindings: i2c: Drop unused voltage supply from example
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: i2c: Rewrite Nomadik I2C bindings in YAML
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 0/2] dt-bindings: sifive: fix dt-schema errors
  • From: <Conor.Dooley@xxxxxxxxxxxxx>
• Re: [PATCH v2 0/2] dt-bindings: sifive: fix dt-schema errors
  • From: Atul Khare <atulkhare@xxxxxxxxxxxx>
• [PATCH v3 1/2] dt-bindings: i2c: Document RZ/V2M I2C controller
  • From: Phil Edworthy <phil.edworthy@xxxxxxxxxxx>
• [PATCH v3 0/2] i2c: Add new driver for Renesas RZ/V2M controller
  • From: Phil Edworthy <phil.edworthy@xxxxxxxxxxx>
• [PATCH v3 2/2] i2c: Add Renesas RZ/V2M controller
  • From: Phil Edworthy <phil.edworthy@xxxxxxxxxxx>
• RE: [PATCH v2 0/2] i2c: Add new driver for Renesas RZ/V2M controller
  • From: Phil Edworthy <phil.edworthy@xxxxxxxxxxx>
• Re: [PATCH v2 0/2] i2c: Add new driver for Renesas RZ/V2M controller
  • From: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>
• Re: [PATCH v2 0/2] i2c: Add new driver for Renesas RZ/V2M controller
  • From: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>
• Re: [PATCH v1 1/1] i2c: scmi: Replace open coded acpi_match_device()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 03/10] i2c: xiic: Switch to Xiic standard mode for i2c-read
  • From: Krzysztof Adamski <krzysztof.adamski@xxxxxxxxx>
• RE: [EXT] Re: [PATCH] i2c: core: Disable i2c_generic_scl_recovery callback checks with CFI
  • From: Zhipeng Wang <zhipeng.wang_1@xxxxxxx>
• Re: [PATCH v1 1/5] ACPI: utils: Introduce acpi_match_video_device_handle() helper
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• [PATCH v1 1/5] ACPI: utils: Introduce acpi_match_video_device_handle() helper
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 3/5] i2c: acpi: Convert to use acpi_match_video_device_handle() helper
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 2/5] ACPI: video: Convert to use acpi_match_video_device_handle() helper
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 4/5] PCI/VGA: Convert to use acpi_match_video_device_handle() helper
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 5/5] platform/x86: thinkpad_acpi: Convert to use acpi_match_video_device_handle() helper
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 1/1] i2c: scmi: Replace open coded acpi_match_device()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: core: Disable i2c_generic_scl_recovery callback checks with CFI
  • From: Sami Tolvanen <samitolvanen@xxxxxxxxxx>
• RE: [PATCH v2 0/2] i2c: Add new driver for Renesas RZ/V2M controller
  • From: Phil Edworthy <phil.edworthy@xxxxxxxxxxx>
• Re: [PATCH v2 0/2] i2c: Add new driver for Renesas RZ/V2M controller
  • From: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>
• RE: [PATCH v2 0/2] i2c: Add new driver for Renesas RZ/V2M controller
  • From: Phil Edworthy <phil.edworthy@xxxxxxxxxxx>
• [PATCH] i2c: cadence: Add standard bus recovery support
  • From: Shubhrajyoti Datta <shubhrajyoti.datta@xxxxxxxxxx>
• RE: [PATCH v2 1/2] dt-bindings: i2c: Document RZ/V2M I2C controller
  • From: Phil Edworthy <phil.edworthy@xxxxxxxxxxx>
• Re: [PATCH v2 2/2] i2c: Add Renesas RZ/V2M controller
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• RE: [PATCH v2 2/2] i2c: Add Renesas RZ/V2M controller
  • From: Phil Edworthy <phil.edworthy@xxxxxxxxxxx>
• RE: [PATCH v2 03/10] i2c: xiic: Switch to Xiic standard mode for i2c-read
  • From: "Datta, Shubhrajyoti" <shubhrajyoti.datta@xxxxxxx>
• Re: [PATCH v2] i2c: i801: Add support for Intel Meteor Lake-P
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [RESEND 0/3] i2c: at91: Fixes and updates
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• RE: [PATCH 02/12] i2c: xiic: Enter standard mode only for > 255 byte read transfers
  • From: "Guntupalli, Manikanta" <manikanta.guntupalli@xxxxxxx>
• Re: Regression: at24 eeprom writing times out on sama5d3
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH v2] i2c: i801: Add support for Intel Meteor Lake-P
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Re: [RESEND 0/3] i2c: at91: Fixes and updates
  • From: Nicolas Ferre <nicolas.ferre@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: i801: Add support for Intel Meteor Lake PCH-P
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• RE: [EXT] Re: [PATCH] i2c: core: Disable i2c_generic_scl_recovery callback checks with CFI
  • From: Zhipeng Wang <zhipeng.wang_1@xxxxxxx>
• Re: [PATCH 6/6] i2c: Make remove callback return void
  • From: Luca Ceresoli <luca@xxxxxxxxxxxxxxxx>
• Re: [RESEND 0/3] i2c: at91: Fixes and updates
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH 1/4] dt-bindings: i2c: st,stm32-i2c: don't mandate a reset line
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v2] i2c: piix4: Fix a memory leak in the EFCH MMIO support
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH] i2c: core: Disable i2c_generic_scl_recovery callback checks with CFI
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v2 0/2] i2c: Add new driver for Renesas RZ/V2M controller
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v6 00/12] platform/x86: introduce p2sb_bar() helper
  • From: Henning Schild <henning.schild@xxxxxxxxxxx>
• Re: [PATCH v6 00/12] platform/x86: introduce p2sb_bar() helper
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] i2c: Add Renesas RZ/V2M controller
  • From: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>
• Re: [PATCH v2 0/2] i2c: Add new driver for Renesas RZ/V2M controller
  • From: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] i2c: Add Renesas RZ/V2M controller
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] i2c: Add Renesas RZ/V2M controller
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v2 03/10] i2c: xiic: Switch to Xiic standard mode for i2c-read
  • From: Marek Vasut <marex@xxxxxxx>
• Re: [PATCH 6/6] i2c: Make remove callback return void
  • From: Maximilian Luz <luzmaximilian@xxxxxxxxx>
• Re: [PATCH v2 03/10] i2c: xiic: Switch to Xiic standard mode for i2c-read
  • From: Krzysztof Adamski <krzysztof.adamski@xxxxxxxxx>
• Re: [PATCH v2 03/10] i2c: xiic: Switch to Xiic standard mode for i2c-read
  • From: Marek Vasut <marex@xxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: i2c: Document RZ/V2M I2C controller
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 6/6] i2c: Make remove callback return void
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH 12/12] i2c: xiic: Correct the BNB interrupt enable sequence
  • From: Krzysztof Adamski <krzysztof.adamski@xxxxxxxxx>
• Re: [PATCH v2 03/10] i2c: xiic: Switch to Xiic standard mode for i2c-read
  • From: Krzysztof Adamski <krzysztof.adamski@xxxxxxxxx>
• Re: [PATCH 06/12] i2c: xiic: Add smbus_block_read functionality
  • From: Krzysztof Adamski <krzysztof.adamski@xxxxxxxxx>
• Re: [PATCH 02/12] i2c: xiic: Enter standard mode only for > 255 byte read transfers
  • From: Krzysztof Adamski <krzysztof.adamski@xxxxxxxxx>
• Re: [PATCH 01/12] i2c: xiic: Add standard mode support for > 255 byte read transfers
  • From: Krzysztof Adamski <krzysztof.adamski@xxxxxxxxx>
• Re: [PATCH v2 1/4] powerpc/52xx: Remove dead code, i.e. mpc52xx_get_xtal_freq()
  • From: Michael Ellerman <patch-notifications@xxxxxxxxxxxxxx>
• Re: [PATCH v2 02/10] i2c: xiic: Add standard mode support for > 255 byte read transfers
  • From: Krzysztof Adamski <krzysztof.adamski@xxxxxxxxx>
• Re: [PATCH v2 02/10] i2c: xiic: Add standard mode support for > 255 byte read transfers
  • From: Michal Simek <michal.simek@xxxxxxx>
• [PATCH] i2c: i801: Add support for Intel Meteor Lake PCH-P
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH 6/6] i2c: Make remove callback return void
  • From: Petr Machata <petrm@xxxxxxxxxx>
• Re: [PATCH v2 02/10] i2c: xiic: Add standard mode support for > 255 byte read transfers
  • From: Krzysztof Adamski <krzysztof.adamski@xxxxxxxxx>
• Re: [PATCH v2 2/2] i2c: Add Renesas RZ/V2M controller
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 6/6] i2c: Make remove callback return void
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: i2c: Document RZ/V2M I2C controller
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: i2c: Document RZ/V2M I2C controller
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 6/6] i2c: Make remove callback return void
  • From: Javier Martinez Canillas <javierm@xxxxxxxxxx>
• Re: [PATCH v8 2/3] bindings: ipmi: Add binding for SSIF BMC driver
  • From: Quan Nguyen <quan@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 6/6] i2c: Make remove callback return void
  • From: Christophe Leroy <christophe.leroy@xxxxxxxxxx>
• Re: [PATCH 6/6] i2c: Make remove callback return void
  • From: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
• Re: [PATCH 6/6] i2c: Make remove callback return void
  • From: Javier Martinez Canillas <javierm@xxxxxxxxxx>
• Re: [PATCH 6/6] i2c: Make remove callback return void
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] i2c: Add Renesas RZ/V2M controller
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: i2c: Document RZ/V2M I2C controller
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• [PATCH 1/1] drivers: remove unnecessary (void*) conversions.
  • From: XU pengfei <xupengfei@xxxxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: i2c: Document RZ/V2M I2C controller
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 2/2] i2c: Add Renesas RZ/V2M controller
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 5/6] gpio: pca953x: Make platform teardown callback return void
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH v2 1/2] dt-bindings: i2c: Document RZ/V2M I2C controller
  • From: Phil Edworthy <phil.edworthy@xxxxxxxxxxx>
• [PATCH v2 2/2] i2c: Add Renesas RZ/V2M controller
  • From: Phil Edworthy <phil.edworthy@xxxxxxxxxxx>
• [PATCH v2 0/2] i2c: Add new driver for Renesas RZ/V2M controller
  • From: Phil Edworthy <phil.edworthy@xxxxxxxxxxx>
• Re: [PATCH] i2c: cadence: Unregister the clk notifier in error path
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• RE: [PATCH 2/2] i2c: Add Renesas RZ/V2M controller
  • From: Phil Edworthy <phil.edworthy@xxxxxxxxxxx>
• [PATCH] i2c: cadence: Unregister the clk notifier in error path
  • From: Satish Nagireddy <satish.nagireddy@xxxxxxxxxxxxx>
• Re: [PATCH 5/6] gpio: pca953x: Make platform teardown callback return void
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH 3/6] leds: lm3601x: Don't use mutex after it was destroyed
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 5/6] gpio: pca953x: Make platform teardown callback return void
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 1/6] drm/i2c/sil164: Drop no-op remove function
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 4/6] leds: lm3601x: Improve error reporting for problems during .remove()
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 2/6] leds: lm3697: Remove duplicated error reporting in .remove()
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH 2/2] i2c: Add Renesas RZ/V2M controller
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH 1/4] dt-bindings: i2c: st,stm32-i2c: don't mandate a reset line
  • From: Rob Herring <robh@xxxxxxxxxx>
• RE: [PATCH 2/2] i2c: Add Renesas RZ/V2M controller
  • From: Phil Edworthy <phil.edworthy@xxxxxxxxxxx>
• Re: [PATCH 2/2] i2c: Add Renesas RZ/V2M controller
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH 2/2] i2c: Add Renesas RZ/V2M controller
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• RE: [PATCH v2 00/10] i2c: xiic: Add features, bug fixes.
  • From: "Guntupalli, Manikanta" <manikanta.guntupalli@xxxxxxx>
• [PATCH] i2c: core: Disable i2c_generic_scl_recovery callback checks with CFI
  • From: Zhipeng Wang <zhipeng.wang_1@xxxxxxx>
• Re: [PATCH v6 1/4] mfd: ch341: add core driver for the WCH CH341 in I2C/SPI/GPIO mode
  • From: Frank Zago <frank@xxxxxxxx>
• Re: [PATCH v8 2/3] bindings: ipmi: Add binding for SSIF BMC driver
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v3 4/4] riscv: dts: sifive: "fix" pmic watchdog node name
  • From: <Conor.Dooley@xxxxxxxxxxxxx>
• Re: [PATCH v6 1/4] mfd: ch341: add core driver for the WCH CH341 in I2C/SPI/GPIO mode
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v6 1/4] mfd: ch341: add core driver for the WCH CH341 in I2C/SPI/GPIO mode
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v6 1/4] mfd: ch341: add core driver for the WCH CH341 in I2C/SPI/GPIO mode
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: i2c: Document RZ/V2M I2C controller
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• RE: [PATCH 1/2] dt-bindings: i2c: Document RZ/V2M I2C controller
  • From: Phil Edworthy <phil.edworthy@xxxxxxxxxxx>
• Re: [PATCH 1/1] dt-bindings: i2c: i2c-rk3x: add rk3588 compatible
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: i2c: Document RZ/V2M I2C controller
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• RE: [PATCH 2/2] i2c: Add Renesas RZ/V2M controller
  • From: Phil Edworthy <phil.edworthy@xxxxxxxxxxx>
• [PATCH 12/12] i2c: xiic: Correct the BNB interrupt enable sequence
  • From: Manikanta Guntupalli <manikanta.guntupalli@xxxxxxxxxx>
• [PATCH 11/12] i2c: xiic: Add SCL frequency configuration support
  • From: Manikanta Guntupalli <manikanta.guntupalli@xxxxxxxxxx>
• [PATCH 10/12] i2c: xiic: Update compatible with new IP version
  • From: Manikanta Guntupalli <manikanta.guntupalli@xxxxxxxxxx>
• [PATCH 09/12] dt-bindings: i2c: xiic: Add 'xlnx,axi-iic-2.1' to compatible
  • From: Manikanta Guntupalli <manikanta.guntupalli@xxxxxxxxxx>
• [PATCH 07/12] i2c: xiic: Switch to Xiic standard mode for i2c-read
  • From: Manikanta Guntupalli <manikanta.guntupalli@xxxxxxxxxx>
• [PATCH 08/12] i2c: xiic: Remove interrupt enable/disable in Rx path
  • From: Manikanta Guntupalli <manikanta.guntupalli@xxxxxxxxxx>
• [PATCH 06/12] i2c: xiic: Add smbus_block_read functionality
  • From: Manikanta Guntupalli <manikanta.guntupalli@xxxxxxxxxx>
• [PATCH 04/12] i2c: xiic: Add wait for FIFO empty in send_tx
  • From: Manikanta Guntupalli <manikanta.guntupalli@xxxxxxxxxx>
• [PATCH 05/12] i2c: xiic: Use 'nmsgs' variable instead of repeated_start
  • From: Manikanta Guntupalli <manikanta.guntupalli@xxxxxxxxxx>
• [PATCH 03/12] i2c: xiic: Fix Rx and Tx paths in standard mode repeated start
  • From: Manikanta Guntupalli <manikanta.guntupalli@xxxxxxxxxx>
• [PATCH 01/12] i2c: xiic: Add standard mode support for > 255 byte read transfers
  • From: Manikanta Guntupalli <manikanta.guntupalli@xxxxxxxxxx>
• [PATCH 00/12] i2c: xiic: Added Standard mode and SMBus
  • From: Manikanta Guntupalli <manikanta.guntupalli@xxxxxxxxxx>
• [PATCH 02/12] i2c: xiic: Enter standard mode only for > 255 byte read transfers
  • From: Manikanta Guntupalli <manikanta.guntupalli@xxxxxxxxxx>
• Re: [PATCH 2/2] i2c: Add Renesas RZ/V2M controller
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH 2/2] i2c: Add Renesas RZ/V2M controller
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH 0/2] i2c: Add new driver for Renesas RZ/V2M controller
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• [PATCH 2/2] i2c: Add Renesas RZ/V2M controller
  • From: Phil Edworthy <phil.edworthy@xxxxxxxxxxx>
• [PATCH 1/2] dt-bindings: i2c: Document RZ/V2M I2C controller
  • From: Phil Edworthy <phil.edworthy@xxxxxxxxxxx>
• [PATCH 0/2] i2c: Add new driver for Renesas RZ/V2M controller
  • From: Phil Edworthy <phil.edworthy@xxxxxxxxxxx>
• [PATCH 1/1] dt-bindings: i2c: i2c-rk3x: add rk3588 compatible
  • From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx>
• Re: [PATCHv6 1/2] i2c: designware: introduce a custom scl recovery for SoCFPGA platforms
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [bug report] kmemleak from driver i2c_piix4
  • From: Terry Bowman <Terry.Bowman@xxxxxxx>
• Re: [PATCH v8 01/16] clk: generalize devm_clk_get() a bit
  • From: Jon Hunter <jonathanh@xxxxxxxxxx>
• Re: [PATCH v4 1/2] aspeed: i2c: add clock duty cycle property
  • From: Potin Lai <potin.lai.pt@xxxxxxxxx>
• Re: [PATCHv6 1/2] i2c: designware: introduce a custom scl recovery for SoCFPGA platforms
  • From: Dinh Nguyen <dinguyen@xxxxxxxxxx>
• Re: [bug report] kmemleak from driver i2c_piix4
  • From: Terry Bowman <Terry.Bowman@xxxxxxx>
• Re: [PATCH v8 01/16] clk: generalize devm_clk_get() a bit
  • From: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
• Re: [PATCH v8 01/16] clk: generalize devm_clk_get() a bit
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [bug report] kmemleak from driver i2c_piix4
  • From: Jean Delvare <jdelvare@xxxxxxx>
• [PATCH v2] i2c: piix4: Fix a memory leak in the EFCH MMIO support
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [bug report] kmemleak from driver i2c_piix4
  • From: Yi Zhang <yi.zhang@xxxxxxxxxx>
• Re: [PATCHv6 1/2] i2c: designware: introduce a custom scl recovery for SoCFPGA platforms
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v8 01/16] clk: generalize devm_clk_get() a bit
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH v8 01/16] clk: generalize devm_clk_get() a bit
  • From: Jon Hunter <jonathanh@xxxxxxxxxx>
• Re: [bug report] kmemleak from driver i2c_piix4
  • From: Terry Bowman <Terry.Bowman@xxxxxxx>
• Re: [PATCHv6 1/2] i2c: designware: introduce a custom scl recovery for SoCFPGA platforms
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH 2/4] i2c: stm32: only perform a reset if there is a reset property
  • From: Pierre Yves MORDRET <pierre-yves.mordret@xxxxxxxxxxx>
• Re: [PATCH 4/4] i2c: stm32: add support for the STM32MP13 soc
  • From: Pierre Yves MORDRET <pierre-yves.mordret@xxxxxxxxxxx>
• Re: [bug report] kmemleak from driver i2c_piix4
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH v6 00/12] platform/x86: introduce p2sb_bar() helper
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v6 2/2] MAINTAINERS: add the polarfire soc's i2c driver
  • From: Conor Dooley <conor.dooley@xxxxxxxxxxxxx>
• [PATCH v6 1/2] i2c: add support for microchip fpga i2c controllers
  • From: Conor Dooley <conor.dooley@xxxxxxxxxxxxx>
• Re: [PATCH v6 2/4] gpio: ch341: add GPIO MFD cell driver for the CH341
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH] HID: mcp2221: prevent a buffer overflow in mcp_smbus_write()
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• [PATCHv6 1/2] i2c: designware: introduce a custom scl recovery for SoCFPGA platforms
  • From: Dinh Nguyen <dinguyen@xxxxxxxxxx>
• [PATCHv6 2/2] dt-bindings: i2c: dw: Add Intel's SoCFPGA I2C controller
  • From: Dinh Nguyen <dinguyen@xxxxxxxxxx>
• Re: [PATCHv5 1/2] i2c: designware: introduce a custom scl recovery for SoCFPGA platforms
  • From: Dinh Nguyen <dinguyen@xxxxxxxxxx>
• [PATCH] HID: mcp2221: prevent a buffer overflow in mcp_smbus_write()
  • From: Harshit Mogalapalli <harshit.m.mogalapalli@xxxxxxxxxx>
• Re: [PATCH v6 2/4] gpio: ch341: add GPIO MFD cell driver for the CH341
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH] i2c: imx: add irqf_no_suspend
  • From: Pierluigi Passaro <pierluigi.p@xxxxxxxxxxxxx>
• [PATCH 4/4] i2c: stm32: add support for the STM32MP13 soc
  • From: Alain Volmat <alain.volmat@xxxxxxxxxxx>
• [PATCH 3/4] dt-bindings: i2c: st,stm32-i2c: add entry for stm32mp13
  • From: Alain Volmat <alain.volmat@xxxxxxxxxxx>
• [PATCH 1/4] dt-bindings: i2c: st,stm32-i2c: don't mandate a reset line
  • From: Alain Volmat <alain.volmat@xxxxxxxxxxx>
• [PATCH 2/4] i2c: stm32: only perform a reset if there is a reset property
  • From: Alain Volmat <alain.volmat@xxxxxxxxxxx>
• [PATCH 0/4] i2c: stm32: addition of STM32MP13 support
  • From: Alain Volmat <alain.volmat@xxxxxxxxxxx>
• Re: [PATCH v6 2/4] gpio: ch341: add GPIO MFD cell driver for the CH341
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v6 0/4] add driver for the WCH CH341 in I2C/GPIO mode
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v5 2/3] gpio: ch341: add GPIO MFD cell driver for the CH341
  • From: Johan Hovold <johan@xxxxxxxxxx>
• Re: [PATCH v8 1/3] ipmi: ssif_bmc: Add SSIF BMC driver
  • From: Quan Nguyen <quan@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v8 1/3] ipmi: ssif_bmc: Add SSIF BMC driver
  • From: Quan Nguyen <quan@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PULL REQUEST] i2c-for-5.19-rc3
  • From: pr-tracker-bot@xxxxxxxxxx
• Re: [PATCH] Print some info into ring-buffer during loading
  • From: <Conor.Dooley@xxxxxxxxxxxxx>
• Re: [PATCH] Print some info into ring-buffer during loading
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH] Print some info into ring-buffer during loading
  • From: <Conor.Dooley@xxxxxxxxxxxxx>
• [PULL REQUEST] i2c-for-5.19-rc3
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• [PATCH] Print some info into ring-buffer during loading
  • From: root <lijessen2016@xxxxxxxxx>
• Re: [PATCH v2 0/2] dt-bindings: sifive: fix dt-schema errors
  • From: <Conor.Dooley@xxxxxxxxxxxxx>
• Re: [PATCHv5 1/2] i2c: designware: introduce a custom scl recovery for SoCFPGA platforms
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Re: [bug report] kmemleak from driver i2c_piix4
  • From: Yi Zhang <yi.zhang@xxxxxxxxxx>
• Re: [PATCH v6 2/4] gpio: ch341: add GPIO MFD cell driver for the CH341
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [bug report] kmemleak from driver i2c_piix4
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH v7 3/3] i2c: aspeed: Assert NAK when slave is busy
  • From: Quan Nguyen <quan@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: efm32: remove bindings for deleted platform
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH 2/2] i2c: Fix a potential use after free
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v8 1/3] ipmi: ssif_bmc: Add SSIF BMC driver
  • From: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
• Re: [PATCH v8 1/3] ipmi: ssif_bmc: Add SSIF BMC driver
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH] i2c: core: fix potential use-after-free on adapter removal
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: efm32: remove bindings for deleted platform
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] i2c: cadence: Change large transfer count reset logic to be unconditional
  • From: Robert Hancock <robert.hancock@xxxxxxxxxx>
• Re: [PATCH v8 1/3] ipmi: ssif_bmc: Add SSIF BMC driver
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: hwmon: move ibm,p8-occ bindings to proper folder
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCHv5 2/2] dt-bindings: i2c: dw: Add Intel's SoCFPGA I2C controller
  • From: Dinh Nguyen <dinguyen@xxxxxxxxxx>
• [PATCHv5 1/2] i2c: designware: introduce a custom scl recovery for SoCFPGA platforms
  • From: Dinh Nguyen <dinguyen@xxxxxxxxxx>
• Re: [PATCH v7 3/3] i2c: aspeed: Assert NAK when slave is busy
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v6 3/4] i2c: ch341: add I2C MFD cell driver for the CH341
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCHv4 1/2] i2c: designware: introduce a custom scl recovery for SoCFPGA platforms
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• RE: [PATCH v8 1/3] ipmi: ssif_bmc: Add SSIF BMC driver
  • From: Ryan Chen <ryan_chen@xxxxxxxxxxxxxx>
• Re: [PATCH v6 3/4] i2c: ch341: add I2C MFD cell driver for the CH341
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH] dt-bindings: efm32: remove bindings for deleted platform
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v8 1/3] ipmi: ssif_bmc: Add SSIF BMC driver
  • From: Quan Nguyen <quan@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v7 3/3] i2c: aspeed: Assert NAK when slave is busy
  • From: Quan Nguyen <quan@xxxxxxxxxxxxxxxxxxxxxx>
• RE: [PATCH] i2c: cadence: Change large transfer count reset logic to be unconditional
  • From: "Datta, Shubhrajyoti" <shubhrajyoti.datta@xxxxxxx>
• Re: [PATCH v6 3/4] i2c: ch341: add I2C MFD cell driver for the CH341
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
• [PATCH v6 2/4] gpio: ch341: add GPIO MFD cell driver for the CH341
  • From: frank zago <frank@xxxxxxxx>
• [PATCH v6 3/4] i2c: ch341: add I2C MFD cell driver for the CH341
  • From: frank zago <frank@xxxxxxxx>
• [PATCH v6 4/4] docs: misc: add documentation for ch341 driver
  • From: frank zago <frank@xxxxxxxx>
• [PATCH v6 1/4] mfd: ch341: add core driver for the WCH CH341 in I2C/SPI/GPIO mode
  • From: frank zago <frank@xxxxxxxx>
• [PATCH v6 0/4] add driver for the WCH CH341 in I2C/GPIO mode
  • From: frank zago <frank@xxxxxxxx>
• Re: [PATCH v5 2/3] gpio: ch341: add GPIO MFD cell driver for the CH341
  • From: Frank Zago <frank@xxxxxxxx>
• Re: [PATCH v5 1/3] mfd: ch341: add core driver for the WCH CH341 in I2C/SPI/GPIO mode
  • From: Frank Zago <frank@xxxxxxxx>
• Re: [PATCH v5 3/3] i2c: ch341: add I2C MFD cell driver for the CH341
  • From: Frank Zago <frank@xxxxxxxx>
• Re: [PATCH v5 1/3] mfd: ch341: add core driver for the WCH CH341 in I2C/SPI/GPIO mode
  • From: Frank Zago <frank@xxxxxxxx>
• Re: [PATCH] dt-bindings: efm32: remove bindings for deleted platform
  • From: Stephen Boyd <sboyd@xxxxxxxxxx>
• [PATCH] dt-bindings: hwmon: move ibm,p8-occ bindings to proper folder
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• [PATCH] dt-bindings: efm32: remove bindings for deleted platform
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH] i2c: hisi: use HZ_PER_KHZ macro in units.h
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v7 3/3] i2c: aspeed: Assert NAK when slave is busy
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCHv4 1/2] i2c: designware: introduce a custom scl recovery for SoCFPGA platforms
  • From: Dinh Nguyen <dinguyen@xxxxxxxxxx>
• [PATCHv4 2/2] dt-bindings: i2c: dw: Add Intel's SoCFPGA I2C controller
  • From: Dinh Nguyen <dinguyen@xxxxxxxxxx>
• [PATCHv4 1/2] i2c: designware: introduce a custom scl recovery for SoCFPGA platforms
  • From: Dinh Nguyen <dinguyen@xxxxxxxxxx>
• Re: [PATCH] i2c: core: fix potential use-after-free on adapter removal
  • From: Michał Mirosław <mirq-linux@xxxxxxxxxxxx>
• Re: [RFC PATCH 10/14] i2c: qcom-cci: add msm8974 compatible
  • From: Loic Poulain <loic.poulain@xxxxxxxxxx>
• Re: [RFC PATCH 10/14] i2c: qcom-cci: add msm8974 compatible
  • From: Loic Poulain <loic.poulain@xxxxxxxxxx>
• Re: [PATCH v8 1/3] ipmi: ssif_bmc: Add SSIF BMC driver
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
• Re: [PATCHv3 1/2] i2c: designware: introduce a custom scl recovery for SoCFPGA platforms
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCHv3 1/2] i2c: designware: introduce a custom scl recovery for SoCFPGA platforms
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v8 2/3] bindings: ipmi: Add binding for SSIF BMC driver
  • From: Quan Nguyen <quan@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH v8 3/3] i2c: aspeed: Assert NAK when slave is busy
  • From: Quan Nguyen <quan@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH v8 1/3] ipmi: ssif_bmc: Add SSIF BMC driver
  • From: Quan Nguyen <quan@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH v8 0/3] Add SSIF BMC driver
  • From: Quan Nguyen <quan@xxxxxxxxxxxxxxxxxxxxxx>
• Re: Regression: at24 eeprom writing times out on sama5d3
  • From: <Codrin.Ciubotariu@xxxxxxxxxxxxx>
• [PATCH] i2c: cadence: Change large transfer count reset logic to be unconditional
  • From: Robert Hancock <robert.hancock@xxxxxxxxxx>
• Re: [PATCH v4 2/2] dt-bindings: aspeed-i2c: add properties for setting i2c clock duty cycle
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [RFC PATCH 10/14] i2c: qcom-cci: add msm8974 compatible
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH] i2c: mediatek: Fix an error handling path in mtk_i2c_probe()
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: i2c: Make remove callback return void
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH] MAINTAINERS: core DT include belongs to core
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [syzbot] KASAN: use-after-free Read in i2c_put_adapter
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH] i2c: core: fix potential use-after-free on adapter removal
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v3] i2c-xiic: Fix the type check for xiic_wakeup
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: Regression: at24 eeprom writing times out on sama5d3
  • From: <Conor.Dooley@xxxxxxxxxxxxx>
• Re: Regression: at24 eeprom writing times out on sama5d3
  • From: <Codrin.Ciubotariu@xxxxxxxxxxxxx>
• Re: [PATCH 4/8] i2c: i801: enable FEATURE_IRQ and FEATURE_I2C_BLOCK_READ on all chip versions
  • From: Jean Delvare <jdelvare@xxxxxxx>
• [RESEND 3/3] i2c: at91: add advanced digital filtering support for SAMA5D4
  • From: Codrin Ciubotariu <codrin.ciubotariu@xxxxxxxxxxxxx>
• [RESEND 1/3] i2c: at91: move i2c_recover_bus() outside of at91_do_twi_transfer()
  • From: Codrin Ciubotariu <codrin.ciubotariu@xxxxxxxxxxxxx>
• [RESEND 2/3] i2c: at91: keep the controller disabled when it is not used
  • From: Codrin Ciubotariu <codrin.ciubotariu@xxxxxxxxxxxxx>
• [RESEND 0/3] i2c: at91: Fixes and updates
  • From: Codrin Ciubotariu <codrin.ciubotariu@xxxxxxxxxxxxx>
• Re: [PATCH v3] i2c-xiic: Fix the type check for xiic_wakeup
  • From: Michal Simek <michal.simek@xxxxxxxxxx>
• Re: [PATCH v2] i2c-xiic: Fix the type check for xiic_wakeup
  • From: Michal Simek <michal.simek@xxxxxxxxxx>
• Re: Regression: at24 eeprom writing times out on sama5d3
  • From: <Codrin.Ciubotariu@xxxxxxxxxxxxx>
• Re: [PATCH v2] i2c-xiic: Fix the type check for xiic_wakeup
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2] i2c-xiic: Fix the type check for xiic_wakeup
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v5] i2c: add support for microchip fpga i2c controllers
  • From: <Conor.Dooley@xxxxxxxxxxxxx>
• Re: [PATCH v2] i2c-xiic: Fix the type check for xiic_wakeup
  • From: Michal Simek <michal.simek@xxxxxxxxxx>
• RE: [PATCH v2] i2c-xiic: Fix the type check for xiic_wakeup
  • From: Shubhrajyoti Datta <shubhraj@xxxxxxxxxx>
• [PATCH v3] i2c-xiic: Fix the type check for xiic_wakeup
  • From: Shubhrajyoti Datta <shubhrajyoti.datta@xxxxxxxxxx>
• [PATCHv3 2/2] dt-bindings: i2c: dw: Add Intel's SoCFPGA I2C controller
  • From: Dinh Nguyen <dinguyen@xxxxxxxxxx>
• [PATCHv3 1/2] i2c: designware: introduce a custom scl recovery for SoCFPGA platforms
  • From: Dinh Nguyen <dinguyen@xxxxxxxxxx>
• Re: Regression: at24 eeprom writing times out on sama5d3
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH 4/8] i2c: i801: enable FEATURE_IRQ and FEATURE_I2C_BLOCK_READ on all chip versions
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: Regression: at24 eeprom writing times out on sama5d3
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v2] i2c-xiic: Fix the type check for xiic_wakeup
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: Regression: at24 eeprom writing times out on sama5d3
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH] i2c: designware: Use standard optional ref clock implementation
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• [PATCH] MAINTAINERS: core DT include belongs to core
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH] MAINTAINERS: add include/dt-bindings/i2c to I2C SUBSYSTEM HOST DRIVERS
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v3 4/4] riscv: dts: sifive: "fix" pmic watchdog node name
  • From: <Conor.Dooley@xxxxxxxxxxxxx>
• Re: [PATCH] MAINTAINERS: Rectify entry for OPENCORES I2C BUS DRIVER
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v3 4/4] riscv: dts: sifive: "fix" pmic watchdog node name
  • From: Heiko Stübner <heiko@xxxxxxxxx>
• [PATCH] MAINTAINERS: add include/dt-bindings/i2c to I2C SUBSYSTEM HOST DRIVERS
  • From: Lukas Bulwahn <lukas.bulwahn@xxxxxxxxx>
• [PATCH v2] i2c-xiic: Fix the type check for xiic_wakeup
  • From: Shubhrajyoti Datta <shubhrajyoti.datta@xxxxxxxxxx>
• Re: Regression: at24 eeprom writing times out on sama5d3
  • From: Thorsten Leemhuis <regressions@xxxxxxxxxxxxx>
• [bug report] kmemleak from driver i2c_piix4
  • From: Yi Zhang <yi.zhang@xxxxxxxxxx>
• Re: Regression: at24 eeprom writing times out on sama5d3
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH 8/8] i2c: i801: call i801_check_post() from i801_access()
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH 7/8] i2c: i801: call i801_check_pre() from i801_access()
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH] i2c: designware: Use standard optional ref clock implementation
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCHv2 1/2] i2c: designware: introduce a custom scl recovery for SoCFPGA platforms
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: designware: Use standard optional ref clock implementation
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH] MAINTAINERS: Rectify entry for OPENCORES I2C BUS DRIVER
  • From: Peter Korsgaard <peter@xxxxxxxxxxxxx>
• Re: [PATCH] MAINTAINERS: Rectify entry for OPENCORES I2C BUS DRIVER
  • From: <Conor.Dooley@xxxxxxxxxxxxx>
• Re: [PATCH 6/8] i2c: i801: add i801_single_transaction(), complementing i801_block_transaction()
  • From: Jean Delvare <jdelvare@xxxxxxx>
• [PATCH] MAINTAINERS: Rectify entry for OPENCORES I2C BUS DRIVER
  • From: Lukas Bulwahn <lukas.bulwahn@xxxxxxxxx>
• Re: [PATCH] crypto: atmel-ecc - Remove duplicated error reporting in .remove()
  • From: Herbert Xu <herbert@xxxxxxxxxxxxxxxxxxx>
• [PATCH] i2c: hisi: use HZ_PER_KHZ macro in units.h
  • From: Yicong Yang <yangyicong@xxxxxxxxxxxxx>
• [PATCH] i2c: designware: Use standard optional ref clock implementation
  • From: Serge Semin <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx>
• Re: Regression: at24 eeprom writing times out on sama5d3
  • From: <Codrin.Ciubotariu@xxxxxxxxxxxxx>
• [PATCH v4 1/2] aspeed: i2c: add clock duty cycle property
  • From: Potin Lai <potin.lai.pt@xxxxxxxxx>
• [PATCH v4 2/2] dt-bindings: aspeed-i2c: add properties for setting i2c clock duty cycle
  • From: Potin Lai <potin.lai.pt@xxxxxxxxx>
• [PATCH v4 0/2] Add a property for setting minimum persentage of i2c clock high
  • From: Potin Lai <potin.lai.pt@xxxxxxxxx>
• Re: [PATCH v3 2/2] dt-bindings: aspeed-i2c: add properties for setting i2c clock duty cycle
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2] i2c-xiic: Fix the type check for xiic_wakeup
  • From: Michal Simek <michal.simek@xxxxxxxxxx>
• [PATCH v2] i2c-xiic: Fix the type check for xiic_wakeup
  • From: Shubhrajyoti Datta <shubhrajyoti.datta@xxxxxxxxxx>
• Re: [PATCH v2 0/2] dt-bindings: sifive: fix dt-schema errors
  • From: <Conor.Dooley@xxxxxxxxxxxxx>
• Re: [PATCH v2 0/2] dt-bindings: sifive: fix dt-schema errors
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 2/2] dt-bindings: sifive: add gpio-line-names
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: sifive: add cache-set value of 2048
  • From: Rob Herring <robh@xxxxxxxxxx>
• Regression: at24 eeprom writing times out on sama5d3
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH 5/8] i2c: i801: add helper i801_set_hstadd()
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH v6 5/5] i2c: npcm: Capitalize the one-line comment
  • From: Tyrone Ting <warp5tw@xxxxxxxxx>
• Re: [PATCH v6 4/5] i2c: npcm: Support NPCM845
  • From: Tyrone Ting <warp5tw@xxxxxxxxx>
• Re: [PATCH v6 3/5] i2c: npcm: Correct slave role behavior
  • From: Tyrone Ting <warp5tw@xxxxxxxxx>
• Re: [PATCH v6 2/5] i2c: npcm: Remove own slave addresses 2:10
  • From: Tyrone Ting <warp5tw@xxxxxxxxx>
• Re: [PATCH v6 1/5] dt-bindings: i2c: npcm: support NPCM845
  • From: Tyrone Ting <warp5tw@xxxxxxxxx>
• Re: i2c: Make remove callback return void
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• i2c: Make remove callback return void
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: Re: [PATCH] i2c: npcm7xx: barco-p50-gpio: Add check for platform_driver_register
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: Re: [PATCH] i2c: npcm7xx: barco-p50-gpio: Add check for platform_driver_register
  • From: Jiasheng Jiang <jiasheng@xxxxxxxxxxx>
• Re: [PATCH v2 0/2] dt-bindings: sifive: fix dt-schema errors
  • From: <Conor.Dooley@xxxxxxxxxxxxx>
• Re: [PATCH 11/17] dt-bindings: phy: mediatek,dsi-phy: Add MT8365 SoC bindings
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: [PATCH 05/17] dt-bindings: dma: mediatek,uart-dma: add MT8365 bindings
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• [PATCH v2 0/2] dt-bindings: sifive: fix dt-schema errors
  • From: Atul Khare <atulkhare@xxxxxxxxxxxx>
• [PATCH v2 2/2] dt-bindings: sifive: add gpio-line-names
  • From: Atul Khare <atulkhare@xxxxxxxxxxxx>
• [PATCH v2 1/2] dt-bindings: sifive: add cache-set value of 2048
  • From: Atul Khare <atulkhare@xxxxxxxxxxxx>
• Re: [PATCH v1 0/6] clear riscv dtbs_check errors
  • From: Conor Dooley <mail@xxxxxxxxxxx>
• Re: [PATCH v1 0/6] clear riscv dtbs_check errors
  • From: Atul Khare <atulkhare@xxxxxxxxxxxx>
• Re: [PATCH] i2c: dummy: Drop no-op remove function
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH] i2c: npcm7xx: barco-p50-gpio: Add check for platform_driver_register
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v2] i2c: qcom-cci: simplify access to bus data structure
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v6 5/5] i2c: npcm: Capitalize the one-line comment
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v6 4/5] i2c: npcm: Support NPCM845
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v6 3/5] i2c: npcm: Correct slave role behavior
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v6 2/5] i2c: npcm: Remove own slave addresses 2:10
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v6 1/5] dt-bindings: i2c: npcm: support NPCM845
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v3 2/4] dt-bindings: i2c: convert ocores binding to yaml
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: i2c: Convert arm,i2c-versatile to DT schema
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v1 1/1] MAINTAINERS: Update Synopsys DesingWare I2C to Supported
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: i2c: Rewrite Nomadik I2C bindings in YAML
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v6 00/12] platform/x86: introduce p2sb_bar() helper
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH] crypto: atmel-ecc - Remove duplicated error reporting in .remove()
  • From: <Tudor.Ambarus@xxxxxxxxxxxxx>
• Re: [PATCH v3 3/4] dt-bindings: mfd: convert da9063 to yaml
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v6 00/12] platform/x86: introduce p2sb_bar() helper
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH] crypto: atmel-ecc - Remove duplicated error reporting in .remove()
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH] crypto: atmel-ecc - Remove duplicated error reporting in .remove()
  • From: <Tudor.Ambarus@xxxxxxxxxxxxx>
• Re: [PATCH v6 00/12] platform/x86: introduce p2sb_bar() helper
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v6 11/12] platform/x86: simatic-ipc: drop custom P2SB bar code
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v3 2/2] dt-bindings: aspeed-i2c: add properties for setting i2c clock duty cycle
  • From: Potin Lai <potin.lai.pt@xxxxxxxxx>
• [PATCH v3 1/2] aspeed: i2c: add clock duty cycle property
  • From: Potin Lai <potin.lai.pt@xxxxxxxxx>
• [PATCH v3 0/2] Add i2c clock duty cycle property for setting minimum persentage of clock high
  • From: Potin Lai <potin.lai.pt@xxxxxxxxx>
• Re: [PATCH 4/8] i2c: i801: enable FEATURE_IRQ and FEATURE_I2C_BLOCK_READ on all chip versions
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH 3/8] i2c: i801: make FEATURE_BLOCK_PROC dependent on FEATURE_BLOCK_BUFFER
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH 2/8] i2c: i801: make FEATURE_HOST_NOTIFY dependent on FEATURE_IRQ
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH 1/8] i2c: i801: improve interrupt handler
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH] dt-bindings: i2c: Convert arm,i2c-versatile to DT schema
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: (subset) [PATCH 00/17] Add support for MT8365 EVK board
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v3 1/4] dt-bindings: mmc: convert mmc-spi-slot to yaml
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH] crypto: atmel-ecc - Remove duplicated error reporting in .remove()
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH v3 3/4] dt-bindings: mfd: convert da9063 to yaml
  • From: Conor Dooley <mail@xxxxxxxxxxx>
• [PATCH v3 4/4] riscv: dts: sifive: "fix" pmic watchdog node name
  • From: Conor Dooley <mail@xxxxxxxxxxx>
• [PATCH v3 2/4] dt-bindings: i2c: convert ocores binding to yaml
  • From: Conor Dooley <mail@xxxxxxxxxxx>
• [PATCH v3 0/4] clear riscv dtbs_check errors
  • From: Conor Dooley <mail@xxxxxxxxxxx>
• [PATCH v3 1/4] dt-bindings: mmc: convert mmc-spi-slot to yaml
  • From: Conor Dooley <mail@xxxxxxxxxxx>
• Re: [PATCH v2 3/4] dt-bindings: mfd: convert da9063 to yaml
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 2/4] dt-bindings: i2c: convert ocores binding to yaml
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 1/4] dt-bindings: mmc: convert mmc-spi-slot to yaml
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH] dt-bindings: i2c: Convert arm,i2c-versatile to DT schema
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v6 11/12] platform/x86: simatic-ipc: drop custom P2SB bar code
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v6 09/12] watchdog: simatic-ipc-wdt: convert to use P2SB accessor
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v6 02/12] pinctrl: intel: Check against matching data instead of ACPI companion
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v6 05/12] mfd: lpc_ich: Add support for pinctrl in non-ACPI system
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v6 10/12] leds: simatic-ipc-leds: convert to use P2SB accessor
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v6 04/12] mfd: lpc_ich: Switch to generic p2sb_bar()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v6 08/12] EDAC, pnd2: convert to use common P2SB accessor
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v6 07/12] EDAC, pnd2: Use proper I/O accessors and address space annotation
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v6 01/12] platform/x86/intel: Add Primary to Sideband (P2SB) bridge support
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v6 12/12] leds: simatic-ipc-leds-gpio: add GPIO version of Siemens driver
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v6 03/12] mfd: lpc_ich: Factor out lpc_ich_enable_spi_write()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v6 00/12] platform/x86: introduce p2sb_bar() helper
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v6 06/12] i2c: i801: convert to use common P2SB accessor
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 2/4] dt-bindings: i2c: convert ocores binding to yaml
  • From: Conor Dooley <mail@xxxxxxxxxxx>
• [PATCH v2 3/4] dt-bindings: mfd: convert da9063 to yaml
  • From: Conor Dooley <mail@xxxxxxxxxxx>
• [PATCH v2 1/4] dt-bindings: mmc: convert mmc-spi-slot to yaml
  • From: Conor Dooley <mail@xxxxxxxxxxx>
• [PATCH v2 0/4] clear riscv dtbs_check errors
  • From: Conor Dooley <mail@xxxxxxxxxxx>
• [PATCH v2 4/4] riscv: dts: sifive: "fix" pmic watchdog node name
  • From: Conor Dooley <mail@xxxxxxxxxxx>
• Re: [PATCH v1 2/6] dt-bindings: i2c: convert ocores binding to yaml
  • From: <Conor.Dooley@xxxxxxxxxxxxx>
• Re: [PATCH v1 4/6] dt-bindings: mfd: convert da9063 to yaml
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v1 2/6] dt-bindings: i2c: convert ocores binding to yaml
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v1 0/6] clear riscv dtbs_check errors
  • From: <Conor.Dooley@xxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] dt-bindings: aspeed-i2c: add properties for manual clock setting
  • From: Potin Lai <potin.lai.pt@xxxxxxxxx>
• Re: [PATCH v1 6/6] riscv: dts: sifive: "fix" pmic watchdog node name
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v1 2/6] dt-bindings: i2c: convert ocores binding to yaml
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v1 0/6] clear riscv dtbs_check errors
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v1 1/6] dt-bindings: mmc: convert mmc-spi-slot to yaml
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: i2c: qcom,i2c-qup: convert to dtschema
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 2/2] dt-bindings: aspeed-i2c: add properties for manual clock setting
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: i2c: qcom,i2c-qup: convert to dtschema
  • From: Robert Marko <robimarko@xxxxxxxxx>
• Re: [PATCH] dt-bindings: i2c: Rewrite Nomadik I2C bindings in YAML
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: i2c: qcom,i2c-qup: convert to dtschema
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v1 6/6] riscv: dts: sifive: "fix" pmic watchdog node name
  • From: mail@xxxxxxxxxxx
• [PATCH v1 5/6] MAINTAINERS: convert da9063 to yaml
  • From: mail@xxxxxxxxxxx
• [PATCH v1 4/6] dt-bindings: mfd: convert da9063 to yaml
  • From: mail@xxxxxxxxxxx
• [PATCH v1 3/6] MAINTAINERS: convert ocores i2c dt-binding to yaml
  • From: mail@xxxxxxxxxxx
• [PATCH v1 2/6] dt-bindings: i2c: convert ocores binding to yaml
  • From: mail@xxxxxxxxxxx
• [PATCH v1 1/6] dt-bindings: mmc: convert mmc-spi-slot to yaml
  • From: mail@xxxxxxxxxxx
• [PATCH v1 0/6] clear riscv dtbs_check errors
  • From: mail@xxxxxxxxxxx
• Re: [PATCH] dt-bindings: i2c: qcom,i2c-qup: convert to dtschema
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH] dt-bindings: i2c: qcom,i2c-qup: convert to dtschema
  • From: Robert Marko <robimarko@xxxxxxxxx>
• Issues with large reads on Cadence I2C on ZynqMP
  • From: Robert Hancock <robert.hancock@xxxxxxxxxx>
• Re: [PATCH 1/2] i2c: core: Add mux root adapter operations
  • From: Joel Stanley <joel@xxxxxxxxx>
• [PATCH v5] i2c: add support for microchip fpga i2c controllers
  • From: Conor Dooley <conor.dooley@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: aspeed: do not mask SLAVE_MATCH
  • From: Klaus Jensen <its@xxxxxxxxxxxxx>
• Re: [PATCH v2] i2c: qcom-cci: simplify access to bus data structure
  • From: Loic Poulain <loic.poulain@xxxxxxxxxx>
• [PATCH v2] i2c: qcom-cci: simplify access to bus data structure
  • From: Vladimir Zapolskiy <vladimir.zapolskiy@xxxxxxxxxx>
• Re: [PATCH] i2c: qcom-cci: simplify access to bus data structure
  • From: Vladimir Zapolskiy <vladimir.zapolskiy@xxxxxxxxxx>
• Re: [PATCH] i2c: qcom-cci: simplify access to bus data structure
  • From: Loic Poulain <loic.poulain@xxxxxxxxxx>
• [PATCH] i2c: qcom-cci: simplify access to bus data structure
  • From: Vladimir Zapolskiy <vladimir.zapolskiy@xxxxxxxxxx>
• Re: [RFC PATCH 01/14] media: dt-bindings: media: camss: Add qcom,msm8974-camss binding
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [Openipmi-developer] [PATCH v7 1/3] ipmi: ssif_bmc: Add SSIF BMC driver
  • From: Quan Nguyen <quan@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH] i2c: aspeed: do not mask SLAVE_MATCH
  • From: Klaus Jensen <its@xxxxxxxxxxxxx>
• Re: [Openipmi-developer] [PATCH v7 1/3] ipmi: ssif_bmc: Add SSIF BMC driver
  • From: Corey Minyard <minyard@xxxxxxx>
• Re: [PATCHv2 1/2] i2c: designware: introduce a custom scl recovery for SoCFPGA platforms
  • From: Dinh Nguyen <dinguyen@xxxxxxxxxx>
• Re: [PATCH 17/17] arm64: dts: mediatek: add mt8365-evk board device-tree
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 16/17] arm64: dts: mediatek: add mt8365 device-tree
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 15/17] arm64: dts: mediatek: add mt6357 device-tree
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 14/17] dt-bindings: usb: mediatek,mtk-xhci: add MT8365 SoC bindings
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 13/17] dt-bindings: usb: mediatek,mtu3: add MT8365 SoC bindings
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 12/17] dt-bindings: phy: mediatek,tphy: add MT8365 SoC bindings
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 10/17] dt-bindings: serial: mediatek: add MT8365 bindings
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 11/17] dt-bindings: phy: mediatek,dsi-phy: Add MT8365 SoC bindings
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 08/17] dt-bindings: watchdog: mtk-wdt: Add MT8365 SoC bindings
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 09/17] dt-bindings: spi: mt65xx: add MT8365 SoC bindings
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 07/17] dt-bindings: nvmem: mediatek,efuse: add MT8365 bindings
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 06/17] dt-bindings: iio: adc: mediatek: add MT8365 SoC bindings
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 04/17] dt-bindings: arm: mediatek: Add binding for mt8365-evk board
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 05/17] dt-bindings: dma: mediatek,uart-dma: add MT8365 bindings
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 02/17] dt-bindings: memory: add mt8365 SoC binding documentation
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 01/17] dt-bindings: i2c: i2c-mt65xx: add binding for MT8365 SoC
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 03/17] dt-bindings: mmc: mtk-sd: add bindings for MT8365 SoC
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 00/17] Add support for MT8365 EVK board
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [Openipmi-developer] [PATCH v7 1/3] ipmi: ssif_bmc: Add SSIF BMC driver
  • From: Quan Nguyen <quan@xxxxxxxxxxxxxxxxxxxxxx>
• [PATCH v2 0/2] Add i2c clock manual tuning feature for aspeed-i2c driver
  • From: Potin Lai <potin.lai.pt@xxxxxxxxx>
• [PATCH v2 1/2] aspeed: i2c: add manual clock setting feature
  • From: Potin Lai <potin.lai.pt@xxxxxxxxx>
• [PATCH v2 2/2] dt-bindings: aspeed-i2c: add properties for manual clock setting
  • From: Potin Lai <potin.lai.pt@xxxxxxxxx>
• Re: [PATCH] drivers/i2c-aspeed: avoid invalid memory reference after timeout
  • From: Heyi Guo <guoheyi@xxxxxxxxxxxxxxxxx>
• Re: [PULL REQUEST] i2c-for-5.19
  • From: pr-tracker-bot@xxxxxxxxxx
• [PULL REQUEST] i2c-for-5.19
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [Query] Looking for comments on CONFIG_SPI_SPIDEV and CONFIG_I2C_CHARDEV interfaces security
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [Query] Looking for comments on CONFIG_SPI_SPIDEV and CONFIG_I2C_CHARDEV interfaces security
  • From: Prasad Sodagudi <quic_psodagud@xxxxxxxxxxx>
• Re: [PATCH 1/1] aspeed: i2c: add manual clock setup feature
  • From: Potin Lai <potin.lai.pt@xxxxxxxxx>
• [PATCH 17/17] arm64: dts: mediatek: add mt8365-evk board device-tree
  • From: Fabien Parent <fparent@xxxxxxxxxxxx>
• [PATCH 13/17] dt-bindings: usb: mediatek,mtu3: add MT8365 SoC bindings
  • From: Fabien Parent <fparent@xxxxxxxxxxxx>
• [PATCH 11/17] dt-bindings: phy: mediatek,dsi-phy: Add MT8365 SoC bindings
  • From: Fabien Parent <fparent@xxxxxxxxxxxx>
• [PATCH 00/17] Add support for MT8365 EVK board
  • From: Fabien Parent <fparent@xxxxxxxxxxxx>
• [PATCH 06/17] dt-bindings: iio: adc: mediatek: add MT8365 SoC bindings
  • From: Fabien Parent <fparent@xxxxxxxxxxxx>
• [PATCH 09/17] dt-bindings: spi: mt65xx: add MT8365 SoC bindings
  • From: Fabien Parent <fparent@xxxxxxxxxxxx>
• [PATCH 04/17] dt-bindings: arm: mediatek: Add binding for mt8365-evk board
  • From: Fabien Parent <fparent@xxxxxxxxxxxx>
• [PATCH 01/17] dt-bindings: i2c: i2c-mt65xx: add binding for MT8365 SoC
  • From: Fabien Parent <fparent@xxxxxxxxxxxx>
• [PATCH 15/17] arm64: dts: mediatek: add mt6357 device-tree
  • From: Fabien Parent <fparent@xxxxxxxxxxxx>
• [PATCH 14/17] dt-bindings: usb: mediatek,mtk-xhci: add MT8365 SoC bindings
  • From: Fabien Parent <fparent@xxxxxxxxxxxx>
• [PATCH 07/17] dt-bindings: nvmem: mediatek,efuse: add MT8365 bindings
  • From: Fabien Parent <fparent@xxxxxxxxxxxx>