Le 23/08/2022 à 16:56, Tharun Kumar P a écrit :
Microchip PCI1XXXX is an unmanaged PCIe3.1a Switch for Consumer,
Industrial and Automotive applications. This switch has multiple
downstream ports. In one of the Switch's Downstream port, there
is a multifunction endpoint for peripherals which includes an I2C
host controller. The I2C function in the endpoint operates at 100KHz,
400KHz and 1 MHz and has buffer depth of 128 bytes.
This patch provides the I2C controller driver for the I2C endpoint
of the switch.
Signed-off-by: Tharun Kumar P <tharunkumar.pasumarthi@xxxxxxxxxxxxx>
---
MAINTAINERS | 8 +
drivers/i2c/busses/Kconfig | 10 +
drivers/i2c/busses/Makefile | 1 +
drivers/i2c/busses/i2c-mchp-pci1xxxx.c | 1123 ++++++++++++++++++++++++
4 files changed, 1142 insertions(+)
create mode 100644 drivers/i2c/busses/i2c-mchp-pci1xxxx.c
+static int pci1xxxx_i2c_probe_pci(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
+{
+ struct pci1xxxx_i2c *i2c;
+ int ret;
+
+ i2c = devm_kzalloc(&pdev->dev, sizeof(*i2c), GFP_KERNEL);
+ if (!i2c)
+ return -ENOMEM;
+
+ pci_set_drvdata(pdev, i2c);
+
+ i2c->i2c_xfer_in_progress = false;
+
+ ret = pcim_enable_device(pdev);
+ if (ret)
+ return ret;
+
+ pci_set_master(pdev);
+
+ /* we are getting the base address of the SMB core. SMB core uses
+ * BAR0 and 32K is the size here pci_resource_len returns 32K by
+ * reading BAR0
+ */
+
+ ret = pcim_iomap_regions(pdev, BIT(0), pci_name(pdev));
+ if (ret < 0)
+ return -ENOMEM;
+
+ i2c->i2c_base = pcim_iomap_table(pdev)[0];
+
+ init_completion(&i2c->i2c_xfer_done);
+
+ pci1xxxx_i2c_init(i2c);
+
+ dev_info(&pdev->dev, "i2c clock freq: %d\n", i2c->freq);
+
+ ret = pci_alloc_irq_vectors(pdev, 1, 1, PCI_IRQ_ALL_TYPES);
+ if (ret < 0)
+ return ret;
+
+ /*Register the isr. we are not using any isr flags here.*/
+ ret = devm_request_irq(&pdev->dev, pci_irq_vector(pdev, 0),
+ pci1xxxx_i2c_isr, PCI1XXXX_IRQ_FLAGS,
+ pci_name(pdev), i2c);
+ if (ret)
+ goto err_free_region;
+
+ i2c->adap = pci1xxxx_i2c_ops;
+ i2c->adap.class = I2C_CLASS_SPD;
+ i2c->adap.dev.parent = &pdev->dev;
+
+ snprintf(i2c->adap.name, sizeof(i2c->adap.name),
+ "MCHP PCI1xxxx i2c adapter at %s", pci_name(pdev));
+
+ i2c_set_adapdata(&i2c->adap, i2c);
+
+ ret = i2c_add_adapter(&i2c->adap);
+ if (ret) {
+ dev_err(&pdev->dev, "i2c add adapter failed = %d\n", ret);
+ pci1xxxx_i2c_shutdown(i2c);
+ goto err_free_region;
+ }
+
+ return 0;
+
+err_free_region:
+ pci_free_irq_vectors(pdev);
Should this also be part of the .remove function?
CJ
+ return ret;
+}
+
+static void pci1xxxx_i2c_remove_pci(struct pci_dev *pdev)
+{
+ struct pci1xxxx_i2c *i2c = pci_get_drvdata(pdev);
+
+ i2c_del_adapter(&i2c->adap);
+ pci1xxxx_i2c_shutdown(i2c);
+}
+
