When the adapter is registered without interrupts, we would be showing
the following:
# i2cdetect -l
i2c-3 i2c Broadcom STB : I2C adapter
which is visually disturbing, only add the separator if we do have an
interrupt.
Fixes: dd1aa2524bc5 ("i2c: brcmstb: Add Broadcom settop SoC i2c controller driver")
Signed-off-by: Florian Fainelli <f.fainelli@xxxxxxxxx>
---
drivers/i2c/busses/i2c-brcmstb.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/i2c/busses/i2c-brcmstb.c b/drivers/i2c/busses/i2c-brcmstb.c
index b00f35c0b066..538a51299e04 100644
--- a/drivers/i2c/busses/i2c-brcmstb.c
+++ b/drivers/i2c/busses/i2c-brcmstb.c
@@ -684,9 +684,11 @@ static int brcmstb_i2c_probe(struct platform_device *pdev)
adap = &dev->adapter;
i2c_set_adapdata(adap, dev);
adap->owner = THIS_MODULE;
- strlcpy(adap->name, "Broadcom STB : ", sizeof(adap->name));
- if (int_name)
+ strlcpy(adap->name, "Broadcom STB", sizeof(adap->name));
+ if (int_name) {
+ strlcat(adap->name, ": ", sizeof(adap->name));
strlcat(adap->name, int_name, sizeof(adap->name));
+ }
adap->algo = &brcmstb_i2c_algo;
adap->dev.parent = &pdev->dev;
adap->dev.of_node = pdev->dev.of_node;
--
2.25.1
