On Wed, Jul 06, 2022 at 10:21:15AM -0700, Florian Fainelli wrote:
> When the adapter is registered without interrupts, we would be showing
> the following:
>
> # i2cdetect -l
> i2c-3 i2c Broadcom STB : I2C adapter
What about switching to pdev->name here? That way you also get the base
address for free to differentiate if there are multiple instances on the
SoC?
>
> which is visually disturbing, only add the separator if we do have an
> interrupt.
>
> Fixes: dd1aa2524bc5 ("i2c: brcmstb: Add Broadcom settop SoC i2c controller driver")
> Signed-off-by: Florian Fainelli <f.fainelli@xxxxxxxxx>
> ---
> drivers/i2c/busses/i2c-brcmstb.c | 6 ++++--
> 1 file changed, 4 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/i2c/busses/i2c-brcmstb.c b/drivers/i2c/busses/i2c-brcmstb.c
> index b00f35c0b066..538a51299e04 100644
> --- a/drivers/i2c/busses/i2c-brcmstb.c
> +++ b/drivers/i2c/busses/i2c-brcmstb.c
> @@ -684,9 +684,11 @@ static int brcmstb_i2c_probe(struct platform_device *pdev)
> adap = &dev->adapter;
> i2c_set_adapdata(adap, dev);
> adap->owner = THIS_MODULE;
> - strlcpy(adap->name, "Broadcom STB : ", sizeof(adap->name));
> - if (int_name)
> + strlcpy(adap->name, "Broadcom STB", sizeof(adap->name));
> + if (int_name) {
> + strlcat(adap->name, ": ", sizeof(adap->name));
> strlcat(adap->name, int_name, sizeof(adap->name));
> + }
> adap->algo = &brcmstb_i2c_algo;
> adap->dev.parent = &pdev->dev;
> adap->dev.of_node = pdev->dev.of_node;
> --
> 2.25.1
>
Attachment:
signature.asc
Description: PGP signature
