On Tue, Aug 30, 2022 at 05:15:37PM -0600, Raul E Rangel wrote:
> Device tree already has a mechanism to pass the wake_irq. It does this
> by looking for the wakeup-source property and setting the
> I2C_CLIENT_WAKE flag. This CL adds the ACPI equivalent. It uses at the
> ACPI GpioInt wake flag to determine if the interrupt can be used to wake
> the system. Previously the i2c drivers had to make assumptions and
> blindly enable the wake IRQ. This can cause spurious wake events. e.g.,
> If there is a device with an Active Low interrupt and the device gets
> powered off while suspending, the interrupt line will go low since it's
> no longer powered and wake the system. For this reason we should respect
> the board designers wishes and honor the wake bit defined on the
> GpioInt.
>
> This change does not cover the ACPI Interrupt or IRQ resources.
>
> Signed-off-by: Raul E Rangel <rrangel@xxxxxxxxxxxx>
> ---
>
> drivers/i2c/i2c-core-acpi.c | 8 ++++++--
> drivers/i2c/i2c-core-base.c | 17 +++++++++++------
> drivers/i2c/i2c-core.h | 4 ++--
> 3 files changed, 19 insertions(+), 10 deletions(-)
>
> diff --git a/drivers/i2c/i2c-core-acpi.c b/drivers/i2c/i2c-core-acpi.c
> index c762a879c4cc6b..cfe82a6ba3ef28 100644
> --- a/drivers/i2c/i2c-core-acpi.c
> +++ b/drivers/i2c/i2c-core-acpi.c
> @@ -182,12 +182,13 @@ static int i2c_acpi_add_resource(struct acpi_resource *ares, void *data)
> /**
> * i2c_acpi_get_irq - get device IRQ number from ACPI
> * @client: Pointer to the I2C client device
> + * @wake_capable: Set to 1 if the IRQ is wake capable
> *
> * Find the IRQ number used by a specific client device.
> *
> * Return: The IRQ number or an error code.
> */
> -int i2c_acpi_get_irq(struct i2c_client *client)
> +int i2c_acpi_get_irq(struct i2c_client *client, int *wake_capable)
> {
> struct acpi_device *adev = ACPI_COMPANION(&client->dev);
> struct list_head resource_list;
> @@ -196,6 +197,9 @@ int i2c_acpi_get_irq(struct i2c_client *client)
>
> INIT_LIST_HEAD(&resource_list);
>
> + if (wake_capable)
> + *wake_capable = 0;
> +
> ret = acpi_dev_get_resources(adev, &resource_list,
> i2c_acpi_add_resource, &irq);
You also need to handle "Interrupt(..., ...AndWake)" case here. I would
look into maybe defining
#define IORESOURCE_IRQ_WAKECAPABLE (1<<6)
in include/linux/ioport.h and plumbing it through from ACPI layer.
Thanks.
--
Dmitry
