Re: [PATCH RFC i2c-master] i2c: microchip: pci1xxxx: Add driver for I2C host controller in multifunction endpoint of pci1xxxx switch

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Aug 24, 2022 at 6:04 PM <Tharunkumar.Pasumarthi@xxxxxxxxxxxxx> wrote:
> On Tue, 2022-08-23 at 18:05 +0300, Andy Shevchenko wrote:
> > On Tue, Aug 23, 2022 at 08:26:03PM +0530, Tharun Kumar P wrote:

...

> > > + * Author: Tharun Kumar P <tharunkumar.pasumarthi@xxxxxxxxxxxxx>
> > > + *         Kumaravel Thiagarajan <kumaravel.thiagarajan@xxxxxxxxxxxxx>
> >
> > Single or many?
>
> There are 2 authors for this file

Do you see the issue now?

...

> > > +#define SMB_CORE_CTRL_ESO    0x40
> > > +#define SMB_CORE_CTRL_FW_ACK 0x10
> >
> > Are they bits or numbers?
>
> These are bits

Use BIT() then. Ditto for the rest of the bits.

...

> > > +#define SMB_IDLE_SCALING_100KHZ              0x03E803C9
> > > +#define SMB_IDLE_SCALING_400KHZ              0x01F4009D
> > > +#define SMB_IDLE_SCALING_1000KHZ     0x01F4009D
> >
> > Shouldn't these magics be decimals?

This Q seems unanswered.

> > Ditto for the rest similar stuff.
>
> There is no direct correlation between the hex value and time. Configuring
> registers with these values in driver will set the time in device.

...

> > > +#define I2C_DIR_WRITE                0
> > > +#define I2C_DIR_READ         1

https://elixir.bootlin.com/linux/v6.0-rc2/source/include/uapi/linux/i2c.h#L24

> > Namespace collision. Doesn't I²C core provide these?
>
> I am unable to find any existing MACROs for WRITE and READ in I2C core. Kindly
> let me know the MACROs

...

> > > +#define PCI1XXXX_I2C_TIMEOUT 1000
> >
> > Units? Same to the rest similar cases.
>
> Unit is milliseconds

So you know what to do, right?

...

> > > +#define SMBUS_PERI_LOCK              BIT(3)
> >
> > BIT() out of a sudden. See above.
>
> Will use hex value for this like in other places to maintain uniformity

See above.

...

> > > +     pci1xxxx_i2c_shutdown(i2c);
> >
> > Do you really need this in ->remove()? I would expect something in
> > the ->suspend() / ->shutdown().
>
> pci1xxxx_i2c_shutdown API will reset the registers that are set as part of
> pci1xxxx_i2c_init. So, this API is present in ->remove() and not in ->suspend()
> callback

I understand that, but it doesn't really answer my question.

-- 
With Best Regards,
Andy Shevchenko




[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux