[RESEND PATCH] i2c/busses/pasemi: Remove hardcoded bus numbers on smbus

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The pasemi smbus controller uses PCI_FUNC(dev->devfn) to define which
number bus to attach to, however this fails when something else is 
probed first, for example an ATI Radeon graphics card will claim 9 or
10 busses, including the ones the pasemi wants.
Patch the driver to call i2c_add_adapter rather than
i2c_add_numbered_adapter.

Signed-off-by: Darren Stevens <darren@xxxxxxxxxxxxxxxx>

---

diff --git a/drivers/i2c/busses/i2c-pasemi.c b/drivers/i2c/busses/i2c-pasemi.c
index df1dbc9..05847fd 100644
--- a/drivers/i2c/busses/i2c-pasemi.c
+++ b/drivers/i2c/busses/i2c-pasemi.c
@@ -365,7 +365,6 @@ static int pasemi_smb_probe(struct pci_dev *dev,
 	smbus->adapter.class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
 	smbus->adapter.algo = &smbus_algorithm;
 	smbus->adapter.algo_data = smbus;
-	smbus->adapter.nr = PCI_FUNC(dev->devfn);
 
 	/* set up the sysfs linkage to our parent device */
 	smbus->adapter.dev.parent = &dev->dev;
@@ -373,7 +372,7 @@ static int pasemi_smb_probe(struct pci_dev *dev,
 	reg_write(smbus, REG_CTL, (CTL_MTR | CTL_MRR |
 		  (CLK_100K_DIV & CTL_CLK_M)));
 
-	error = i2c_add_numbered_adapter(&smbus->adapter);
+	error = i2c_add_adapter(&smbus->adapter);
 	if (error)
 		goto out_release_region;
 

[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux