Alter the DaVinci GPIO recovery fetch to use descriptors
all the way down into the board files.
Cc: arm@xxxxxxxxxx
Cc: Kevin Hilman <khilman@xxxxxxxxxx>
Cc: Keerthy <j-keerthy@xxxxxx>
Cc: Sekhar Nori <nsekhar@xxxxxx>
Acked-by: Sekhar Nori <nsekhar@xxxxxx>
Tested-by: Sekhar Nori <nsekhar@xxxxxx>
Signed-off-by: Linus Walleij <linus.walleij@xxxxxxxxxx>
---
ChangeLog v1->v2:
- Change gpiochip name from gpio_davinci.0 to gpio_davinci, simply.
---
arch/arm/mach-davinci/board-dm355-evm.c | 15 +++++++++++++--
arch/arm/mach-davinci/board-dm644x-evm.c | 15 +++++++++++++--
drivers/i2c/busses/i2c-davinci.c | 21 +++++++++++----------
include/linux/platform_data/i2c-davinci.h | 5 ++---
4 files changed, 39 insertions(+), 17 deletions(-)
diff --git a/arch/arm/mach-davinci/board-dm355-evm.c b/arch/arm/mach-davinci/board-dm355-evm.c
index 62e7bc3018f0..e457f299cd44 100644
--- a/arch/arm/mach-davinci/board-dm355-evm.c
+++ b/arch/arm/mach-davinci/board-dm355-evm.c
@@ -17,6 +17,7 @@
#include <linux/mtd/rawnand.h>
#include <linux/i2c.h>
#include <linux/gpio.h>
+#include <linux/gpio/machine.h>
#include <linux/clk.h>
#include <linux/videodev2.h>
#include <media/i2c/tvp514x.h>
@@ -108,11 +109,20 @@ static struct platform_device davinci_nand_device = {
},
};
+static struct gpiod_lookup_table i2c_recovery_gpiod_table = {
+ .dev_id = "i2c_davinci",
+ .table = {
+ GPIO_LOOKUP("davinci_gpio", 15, "sda",
+ GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
+ GPIO_LOOKUP("davinci_gpio", 14, "scl",
+ GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
+ },
+};
+
static struct davinci_i2c_platform_data i2c_pdata = {
.bus_freq = 400 /* kHz */,
.bus_delay = 0 /* usec */,
- .sda_pin = 15,
- .scl_pin = 14,
+ .gpio_recovery = true,
};
static int dm355evm_mmc_gpios = -EINVAL;
@@ -141,6 +151,7 @@ static struct i2c_board_info dm355evm_i2c_info[] = {
static void __init evm_init_i2c(void)
{
+ gpiod_add_lookup_table(&i2c_recovery_gpiod_table);
davinci_init_i2c(&i2c_pdata);
gpio_request(5, "dm355evm_msp");
diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c
index b07c9b18d427..85e6fb33b1ee 100644
--- a/arch/arm/mach-davinci/board-dm644x-evm.c
+++ b/arch/arm/mach-davinci/board-dm644x-evm.c
@@ -13,6 +13,7 @@
#include <linux/dma-mapping.h>
#include <linux/platform_device.h>
#include <linux/gpio.h>
+#include <linux/gpio/machine.h>
#include <linux/i2c.h>
#include <linux/platform_data/pcf857x.h>
#include <linux/platform_data/at24.h>
@@ -595,18 +596,28 @@ static struct i2c_board_info __initdata i2c_info[] = {
},
};
+static struct gpiod_lookup_table i2c_recovery_gpiod_table = {
+ .dev_id = "i2c_davinci",
+ .table = {
+ GPIO_LOOKUP("davinci_gpio", 44, "sda",
+ GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
+ GPIO_LOOKUP("davinci_gpio", 43, "scl",
+ GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
+ },
+};
+
/* The msp430 uses a slow bitbanged I2C implementation (ergo 20 KHz),
* which requires 100 usec of idle bus after i2c writes sent to it.
*/
static struct davinci_i2c_platform_data i2c_pdata = {
.bus_freq = 20 /* kHz */,
.bus_delay = 100 /* usec */,
- .sda_pin = 44,
- .scl_pin = 43,
+ .gpio_recovery = true,
};
static void __init evm_init_i2c(void)
{
+ gpiod_add_lookup_table(&i2c_recovery_gpiod_table);
davinci_init_i2c(&i2c_pdata);
i2c_add_driver(&dm6446evm_msp_driver);
i2c_register_board_info(1, i2c_info, ARRAY_SIZE(i2c_info));
diff --git a/drivers/i2c/busses/i2c-davinci.c b/drivers/i2c/busses/i2c-davinci.c
index 2afb12a89eb3..cb24a3ffdfa2 100644
--- a/drivers/i2c/busses/i2c-davinci.c
+++ b/drivers/i2c/busses/i2c-davinci.c
@@ -33,7 +33,7 @@
#include <linux/io.h>
#include <linux/slab.h>
#include <linux/cpufreq.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
#include <linux/of_device.h>
#include <linux/platform_data/i2c-davinci.h>
#include <linux/pm_runtime.h>
@@ -869,19 +869,20 @@ static int davinci_i2c_probe(struct platform_device *pdev)
if (dev->pdata->has_pfunc)
adap->bus_recovery_info = &davinci_i2c_scl_recovery_info;
- else if (dev->pdata->scl_pin) {
+ else if (dev->pdata->gpio_recovery) {
rinfo = &davinci_i2c_gpio_recovery_info;
adap->bus_recovery_info = rinfo;
- r = gpio_request_one(dev->pdata->scl_pin, GPIOF_OPEN_DRAIN |
- GPIOF_OUT_INIT_HIGH, "i2c-scl");
- if (r)
+ rinfo->scl_gpiod = devm_gpiod_get(&pdev->dev, "scl",
+ GPIOD_OUT_HIGH_OPEN_DRAIN);
+ if (IS_ERR(rinfo->scl_gpiod)) {
+ r = PTR_ERR(rinfo->scl_gpiod);
goto err_unuse_clocks;
- rinfo->scl_gpiod = gpio_to_desc(dev->pdata->scl_pin);
-
- r = gpio_request_one(dev->pdata->sda_pin, GPIOF_IN, "i2c-sda");
- if (r)
+ }
+ rinfo->sda_gpiod = devm_gpiod_get(&pdev->dev, "sda", GPIOD_IN);
+ if (IS_ERR(rinfo->sda_gpiod)) {
+ r = PTR_ERR(rinfo->sda_gpiod);
goto err_unuse_clocks;
- rinfo->sda_gpiod = gpio_to_desc(dev->pdata->scl_pin);
+ }
}
adap->nr = pdev->id;
diff --git a/include/linux/platform_data/i2c-davinci.h b/include/linux/platform_data/i2c-davinci.h
index 89fd34727a24..98967df07468 100644
--- a/include/linux/platform_data/i2c-davinci.h
+++ b/include/linux/platform_data/i2c-davinci.h
@@ -16,9 +16,8 @@
struct davinci_i2c_platform_data {
unsigned int bus_freq; /* standard bus frequency (kHz) */
unsigned int bus_delay; /* post-transaction delay (usec) */
- unsigned int sda_pin; /* GPIO pin ID to use for SDA */
- unsigned int scl_pin; /* GPIO pin ID to use for SCL */
- bool has_pfunc; /*chip has a ICPFUNC register */
+ bool gpio_recovery; /* Use GPIO recovery method */
+ bool has_pfunc; /* Chip has a ICPFUNC register */
};
/* for board setup code */
--
2.14.3
