Linux Kernel I2C

• Thread Index

• [PATCH 2/3] i2c: add runtime PM handling to core
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH 3/3] i2c: imx: use runtime PM provided by core
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH 1/3] i2c: imx: use clk notifier for rate changes
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• [PATCH 0/3] imx i2c vs clk framework deadlock fix
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• Re: [PATCH 5/6] arm64: renesas: draak: enable I2C controller 1
  • From: Simon Horman <horms@xxxxxxxxxxxx>
• Re: [PATCH 4/6] arm64: renesas: draak: enable I2C controller 0 and EEPROM
  • From: Simon Horman <horms@xxxxxxxxxxxx>
• Re: [PATCH 5/6] arm64: renesas: draak: enable I2C controller 1
  • From: Simon Horman <horms@xxxxxxxxxxxx>
• Re: [PATCH 4/6] arm64: renesas: draak: enable I2C controller 0 and EEPROM
  • From: Simon Horman <horms@xxxxxxxxxxxx>
• Re: [PATCH 3/6] arm64: renesas: r8a77995: add I2C support
  • From: Simon Horman <horms@xxxxxxxxxxxx>
• Re: [PATCH 3/5] ARM64: dts: meson-axg: add I2C DT info for Meson-AXG SoC
  • From: Yixun Lan <yixun.lan@xxxxxxxxxxx>
• Re: [PATCH 1/5] dt-bindings: i2c: update documentation for the Meson-AXG
  • From: Yixun Lan <yixun.lan@xxxxxxxxxxx>
• Re: [PATCH 4/5] ARM64: dts: meson-axg: describe pin DT info for I2C controller
  • From: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
• Re: [PATCH 3/5] ARM64: dts: meson-axg: add I2C DT info for Meson-AXG SoC
  • From: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
• Re: [PATCH 2/5] i2c: meson: add configurable divider factors
  • From: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
• Re: [PATCH 1/5] dt-bindings: i2c: update documentation for the Meson-AXG
  • From: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
• Re: [PATCH v11 02/10] i2c: i2c-smbus: Move i2c_setup_smbus_alert from i2c-smbus to i2c-core-smbus
  • From: Phil Reid <preid@xxxxxxxxxxxxxxxxx>
• Re: [PATCH RFT] i2c: sh_mobile: make sure to not accidently trigger STOP
  • From: jacopo mondi <jacopo@xxxxxxxxxx>
• [PATCH 2/2] i2c: imx: implement bus recovery with gpio for Layerscape
  • From: <ying.zhang22455@xxxxxxx>
• [PATCH 1/2] i2c: imx: add workaround for erratum ERR010027
  • From: <ying.zhang22455@xxxxxxx>
• [PATCH 5/5] ARM64: dts: meson-axg: enable I2C Master-1 for the audio speaker
  • From: Yixun Lan <yixun.lan@xxxxxxxxxxx>
• [PATCH 1/5] dt-bindings: i2c: update documentation for the Meson-AXG
  • From: Yixun Lan <yixun.lan@xxxxxxxxxxx>
• [PATCH 2/5] i2c: meson: add configurable divider factors
  • From: Yixun Lan <yixun.lan@xxxxxxxxxxx>
• [PATCH 4/5] ARM64: dts: meson-axg: describe pin DT info for I2C controller
  • From: Yixun Lan <yixun.lan@xxxxxxxxxxx>
• [PATCH 3/5] ARM64: dts: meson-axg: add I2C DT info for Meson-AXG SoC
  • From: Yixun Lan <yixun.lan@xxxxxxxxxxx>
• [PATCH 0/5] i2c: meson-axg: add I2C controller driver
  • From: Yixun Lan <yixun.lan@xxxxxxxxxxx>
• [PATCH v2 7/7] eeprom: at24: remove now unneeded smbus-related code
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH v2 6/7] eeprom: at24: eeprom: at24: remove old read functions
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH v2 5/7] eeprom: at24: add regmap-based read functions
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH v2 4/7] eeprom: at24: remove old write functions
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH v2 3/7] eeprom: at24: add regmap-based write function
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH v2 2/7] eeprom: at24: change at24_translate_offset return type
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH v2 1/7] eeprom: at24: add basic regmap_i2c support
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH 0/7] eeprom: at24: switch driver to regmap_i2c
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH v6 3/7] drivers/i2c: Add port structure to FSI algorithm
  • From: Eddie James <eajames@xxxxxxxxxxxxxxxxxx>
• [PATCH v6 5/7] drivers/i2c: Add transfer implementation for FSI algorithm
  • From: Eddie James <eajames@xxxxxxxxxxxxxxxxxx>
• [PATCH v6 2/7] drivers/i2c: Add FSI-attached I2C master algorithm
  • From: Eddie James <eajames@xxxxxxxxxxxxxxxxxx>
• [PATCH v6 6/7] drivers/i2c: Add I2C master locking to FSI algorithm
  • From: Eddie James <eajames@xxxxxxxxxxxxxxxxxx>
• [PATCH v6 1/7] dt-bindings: i2c: Add FSI-attached I2C master dt binding documentation
  • From: Eddie James <eajames@xxxxxxxxxxxxxxxxxx>
• [PATCH v6 4/7] drivers/i2c: Add abort and hardware reset procedures
  • From: Eddie James <eajames@xxxxxxxxxxxxxxxxxx>
• [PATCH v6 7/7] drivers/i2c: Add bus recovery for FSI algorithm
  • From: Eddie James <eajames@xxxxxxxxxxxxxxxxxx>
• [PATCH v6 0/7] drivers/i2c: Add FSI-attached I2C master algorithm
  • From: Eddie James <eajames@xxxxxxxxxxxxxxxxxx>
• [PATCH] dt-bindings: i2c: eeprom: Add Renesas R1EX24128
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• Re: [PATCH 5/6] arm64: renesas: draak: enable I2C controller 1
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH 4/6] arm64: renesas: draak: enable I2C controller 0 and EEPROM
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH 3/6] arm64: renesas: r8a77995: add I2C support
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH 6/6] i2c: rcar: document R8A77970 bindings
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH 2/6] i2c: rcar: enable for R-Car D3 (r8a77995)
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH 1/6] pinctrl: sh-pfc: r8a77995: add missing pins SCL0 and SDA0 to pinmux data
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH] i2c: i801: Fix SMBus ENXIO on resume from suspend.
  • From: Alban Browaeys <alban.browaeys@xxxxxxxxx>
• [PATCH] i2c: core-smbus: prevent stack corruption on read I2C_BLOCK_DATA
  • From: jeremy.compostella@xxxxxxxxx (Compostella, Jeremy)
• [PATCH] i2c: i801: Fix SMBus ENXIO on resume from suspend.
  • From: Alban Browaeys <alban.browaeys@xxxxxxxxx>
• [PATCH 6/6] i2c: rcar: document R8A77970 bindings
  • From: Ulrich Hecht <ulrich.hecht+renesas@xxxxxxxxx>
• [PATCH 5/6] arm64: renesas: draak: enable I2C controller 1
  • From: Ulrich Hecht <ulrich.hecht+renesas@xxxxxxxxx>
• [PATCH 4/6] arm64: renesas: draak: enable I2C controller 0 and EEPROM
  • From: Ulrich Hecht <ulrich.hecht+renesas@xxxxxxxxx>
• [PATCH 3/6] arm64: renesas: r8a77995: add I2C support
  • From: Ulrich Hecht <ulrich.hecht+renesas@xxxxxxxxx>
• [PATCH 2/6] i2c: rcar: enable for R-Car D3 (r8a77995)
  • From: Ulrich Hecht <ulrich.hecht+renesas@xxxxxxxxx>
• [PATCH 1/6] pinctrl: sh-pfc: r8a77995: add missing pins SCL0 and SDA0 to pinmux data
  • From: Ulrich Hecht <ulrich.hecht+renesas@xxxxxxxxx>
• [PATCH 0/6] R-Car D3 (r8a77995) I2C integration
  • From: Ulrich Hecht <ulrich.hecht+renesas@xxxxxxxxx>
• [PATCH RFT] i2c: sh_mobile: make sure to not accidently trigger STOP
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] power: supply: sbs-message: double left shift bug in sbsm_select()
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• Re: [PATCH] power: supply: sbs-message: double left shift bug in sbsm_select()
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PULL REQUEST] i2c for 4.15
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: designware: Don't set SCL timings and speed mode when in slave mode
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: sh_mobile: send STOP according to datasheet
  • From: jacopo mondi <jacopo@xxxxxxxxxx>
• Re: [RFT] i2c: sh_mobile: avoid unnecessary register read
  • From: jacopo mondi <jacopo@xxxxxxxxxx>
• [PATCH v2 2/2] ARM: pxa: move header file out of I2C realm
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH v2 1/2] ARM: pxa: move declarations to proper place
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH v2 0/2] ARM: pxa: move pxa-i2c.h to platform_data
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] power: supply: sbs-message: double left shift bug in sbsm_select()
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] power: supply: sbs-message: double left shift bug in sbsm_select()
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• Re: [PATCH v6 6/9] i2c: smbus: use DMA safe buffers for emulated SMBus transactions
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v6 5/9] i2c: add i2c_master_{send|recv}_dmasafe
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v6 4/9] i2c: refactor i2c_master_{send_recv}
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• [PATCH v1] i2c: ismt: Use %pad specifier for dma_addr_t variables
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v5 4/7] i2c: designware: add i2c gpio recovery option
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v2] ARM: sa1100: simpad: Correct I2C GPIO offsets
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH v2] ARM: sa1100: simpad: Correct I2C GPIO offsets
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v2] ARM: sa1100: simpad: Correct I2C GPIO offsets
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: sh_mobile: send STOP according to datasheet
  • From: Niklas Söderlund <niklas.soderlund@xxxxxxxxxxxx>
• [PATCH] i2c: sh_mobile: send STOP according to datasheet
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Support of DDR4 EEPROMs
  • From: Jean Delvare <jdelvare@xxxxxxx>
• [PATCH 2/4] i2c: mpc: unify obtaining the MPC8533/44 I2C clock prescaler w/ MPC8xxx
  • From: Arseny Solokha <asolokha@xxxxxxxxxx>
• [PATCH 3/4] i2c: mpc: fix PORDEVSR2 mask for MPC8533/44
  • From: Arseny Solokha <asolokha@xxxxxxxxxx>
• [PATCH 0/4] i2c: mpc: Clean up clock selection
  • From: Arseny Solokha <asolokha@xxxxxxxxxx>
• [PATCH 4/4] i2c: mpc: always determine I2C clock prescaler at runtime
  • From: Arseny Solokha <asolokha@xxxxxxxxxx>
• [PATCH 1/4] i2c: mpc: get MPC8xxx I2C clock prescaler before using it in calculations
  • From: Arseny Solokha <asolokha@xxxxxxxxxx>
• Re: [PATCH v5 4/7] i2c: designware: add i2c gpio recovery option
  • From: Phil Reid <preid@xxxxxxxxxxxxxxxxx>
• [RFT] i2c: sh_mobile: avoid unnecessary register read
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• [PATCH v2 0/3] i2c: at91: slave mode support
  • From: Juergen Fitschen <me@xxxxxx>
• [PATCH v2 1/3] i2c: at91: segregate master mode specific code from probe and init func
  • From: Juergen Fitschen <me@xxxxxx>
• [PATCH v2 3/3] i2c: at91: added slave mode support
  • From: Juergen Fitschen <me@xxxxxx>
• [PATCH v2 2/3] i2c: at91: split driver into core and master file
  • From: Juergen Fitschen <me@xxxxxx>
• Re: [PATCH v6 0/9] i2c: document DMA handling and add helpers for it
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: i2c-tools: i2cbusses: Avoid buffer overflows in sysfs paths
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [RFT] i2c: sh_mobile: let RuntimePM do the clock handling
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [RFT] i2c: sh_mobile: let RuntimePM do the clock handling
  • From: jacopo mondi <jacopo@xxxxxxxxxx>
• Re: [PATCH] ARM: sa1100: simpad: Correct I2C GPIO offsets
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 09/12] PM / mfd: intel-lpss: Use DPM_FLAG_SMART_SUSPEND
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v2] ARM: sa1100: simpad: Correct I2C GPIO offsets
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH v2] ARM: sa1100: simpad: Correct I2C GPIO offsets
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: i2c-tools: i2cbusses: Avoid buffer overflows in sysfs paths
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH v5 4/7] i2c: designware: add i2c gpio recovery option
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: i2c-tools: i2cbusses: Avoid buffer overflows in sysfs paths
  • From: Jean Delvare <jdelvare@xxxxxxx>
• [RFT] i2c: sh_mobile: let RuntimePM do the clock handling
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] ARM: sa1100: simpad: Correct I2C GPIO offsets
  • From: Jochen Friedrich <jochen@xxxxxxxx>
• Re: [PATCH v5 4/7] i2c: designware: add i2c gpio recovery option
  • From: Tim Sander <tim@xxxxxxxxxxxxxxx>
• Re: [PATCH v2] ARM: sa1100: simpad: Correct I2C GPIO offsets
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH v2] ARM: sa1100: simpad: Correct I2C GPIO offsets
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH] ARM: sa1100: simpad: Correct I2C GPIO offsets
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH] ARM: sa1100: simpad: Correct I2C GPIO offsets
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH] ARM: sa1100: simpad: Correct I2C GPIO offsets
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v11 02/10] i2c: i2c-smbus: Move i2c_setup_smbus_alert from i2c-smbus to i2c-core-smbus
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 0/2] ARM: pxa: move pxa-i2c.h to platform_data
  • From: Robert Jarzmik <robert.jarzmik@xxxxxxx>
• Re: [PATCH v11 02/10] i2c: i2c-smbus: Move i2c_setup_smbus_alert from i2c-smbus to i2c-core-smbus
  • From: Phil Reid <preid@xxxxxxxxxxxxxxxxx>
• Re: [PATCH v5 4/7] i2c: designware: add i2c gpio recovery option
  • From: Phil Reid <preid@xxxxxxxxxxxxxxxxx>
• Re: [PATCH v11 02/10] i2c: i2c-smbus: Move i2c_setup_smbus_alert from i2c-smbus to i2c-core-smbus
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v2 1/1] at24: support eeproms that do not roll over page reads.
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v4] i2c: aspeed: Deassert reset in probe
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v5 4/7] i2c: designware: add i2c gpio recovery option
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v4] i2c: aspeed: Deassert reset in probe
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• Re: i2c-tools: i2cbusses: Avoid buffer overflows in sysfs paths
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH v6] eeprom: at24: Add OF device ID table
  • From: Javier Martinez Canillas <javierm@xxxxxxxxxx>
• Re: [PATCH RFT 3/5] i2c: sh_mobile: manually "inline" two short functions
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH RFT 3/5] i2c: sh_mobile: manually "inline" two short functions
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v4] i2c: aspeed: Deassert reset in probe
  • From: Joel Stanley <joel@xxxxxxxxx>
• Re: [PATCH 0/2] ARM: pxa: move pxa-i2c.h to platform_data
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v6] eeprom: at24: Add OF device ID table
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [wsa:i2c/pxa-header-move 1/2] arch/arm/mach-pxa/zylonite_pxa300.c:245:2: error: implicit declaration of function 'pxa_set_i2c_info'
  • From: kbuild test robot <fengguang.wu@xxxxxxxxx>
• [PATCH 1/2] ARM: pxa: move declarations to proper place
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH 2/2] ARM: pxa: move header file out of I2C realm
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH 0/2] ARM: pxa: move pxa-i2c.h to platform_data
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] dt-bindings: i2c: Update documentation for "mv78230-a0-i2c"
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v4] i2c: aspeed: Deassert reset in probe
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: Looking for AT24 maintainer
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH] MAINTAINERS: new maintainer for AT24 driver
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: nuc900: remove platform_data, too
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [wsa:i2c/pxa-header-move 1/2] arch/arm/mach-pxa/zeus.c:869:2: error: implicit declaration of function 'pxa_set_i2c_info'
  • From: kbuild test robot <fengguang.wu@xxxxxxxxx>
• [wsa:i2c/pxa-header-move 1/2] arch/arm/mach-pxa/devices.h:22:46: warning: 'struct i2c_pxa_platform_data' declared inside parameter list will not be visible outside of this definition or declaration
  • From: kbuild test robot <fengguang.wu@xxxxxxxxx>
• [PATCH] i2c: nuc900: remove platform_data, too
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH v6 5/9] i2c: add i2c_master_{send|recv}_dmasafe
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• [PATCH v6 0/9] i2c: document DMA handling and add helpers for it
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• [PATCH v6 2/9] i2c: add helpers to ease DMA handling
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• [PATCH v6 6/9] i2c: smbus: use DMA safe buffers for emulated SMBus transactions
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• [PATCH v6 7/9] i2c: add docs to clarify DMA handling
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• [PATCH v6 8/9] i2c: sh_mobile: use core helper to decide when to use DMA
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• [PATCH v6 9/9] i2c: rcar: skip DMA if buffer is not safe
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• [PATCH v6 1/9] i2c: add a message flag for DMA safe buffers
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• [PATCH v6 4/9] i2c: refactor i2c_master_{send_recv}
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• [PATCH v6 3/9] i2c: dev: mark RDWR buffers as DMA_SAFE
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v1 15/15] media: i2c: adv748x: Remove duplicate NULL check
  • From: Kieran Bingham <kieran.bingham@xxxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: designware: make *CNT values configurable
  • From: "Shikhar Dogra (shidogra)" <shidogra@xxxxxxxxx>
• Re: [PATCH RFC 4/4] i2c: at91: take slave mode capabilities of hardware into account
  • From: Ludovic Desroches <ludovic.desroches@xxxxxxxxxxxxx>
• Re: [PATCH RFC 4/4] i2c: at91: take slave mode capabilities of hardware into account
  • From: Juergen Fitschen <me@xxxxxx>
• Re: [PATCH resend v5 3/3] platform/x86: intel_cht_int33fe: Update fusb302 type string, add properties
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH RFT 0/5] i2c: sh_mobile: refactor HW init/deinit
  • From: jacopo mondi <jacopo@xxxxxxxxxx>
• Re: [PATCH RFC 4/4] i2c: at91: take slave mode capabilities of hardware into account
  • From: Ludovic Desroches <ludovic.desroches@xxxxxxxxxxxxx>
• Re: [PATCH v5 7/7] i2c: remove legacy integer scl/sda gpio for recovery
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH v5 6/7] i2c: davinci: switch to using gpiod for bus recovery gpios
  • From: Sekhar Nori <nsekhar@xxxxxx>
• Re: [PATCH RFC 3/4] i2c: at91: added slave mode support
  • From: Ludovic Desroches <ludovic.desroches@xxxxxxxxxxxxx>
• Re: [PATCH RFC 4/4] i2c: at91: take slave mode capabilities of hardware into account
  • From: Ludovic Desroches <ludovic.desroches@xxxxxxxxxxxxx>
• [PATCH RFT 2/5] i2c: sh_mobile: remove redundant deinitialization
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• [PATCH RFT 1/5] i2c: sh_mobile: remove redundant initialization
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• [PATCH RFT 5/5] i2c: sh_mobile: shorten exit of xfer routine
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• [PATCH RFT 4/5] i2c: sh_mobile: use direct writes when accessing ICE bit
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• [PATCH RFT 3/5] i2c: sh_mobile: manually "inline" two short functions
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• [PATCH RFT 0/5] i2c: sh_mobile: refactor HW init/deinit
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v1 09/15] hwmon: (w83781d) Remove duplicate NULL check
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH] MAINTAINERS: new maintainer for AT24 driver
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v5 2/7] i2c: designware: move i2c_dw_plat_prepare_clk to common
  • From: Phil Reid <preid@xxxxxxxxxxxxxxxxx>
• [PATCH v5 0/7] i2c: designware: add i2c gpio recovery option
  • From: Phil Reid <preid@xxxxxxxxxxxxxxxxx>
• [PATCH v5 3/7] i2c: designware: rename i2c_dw_plat_prepare_clk to i2c_dw_prepare_clk
  • From: Phil Reid <preid@xxxxxxxxxxxxxxxxx>
• [PATCH v5 1/7] i2c: Switch to using gpiod interface for gpio bus recovery
  • From: Phil Reid <preid@xxxxxxxxxxxxxxxxx>
• [PATCH v5 5/7] i2c: imx: switch to using gpiod for bus recovery gpios
  • From: Phil Reid <preid@xxxxxxxxxxxxxxxxx>
• [PATCH v5 7/7] i2c: remove legacy integer scl/sda gpio for recovery
  • From: Phil Reid <preid@xxxxxxxxxxxxxxxxx>
• [PATCH v5 6/7] i2c: davinci: switch to using gpiod for bus recovery gpios
  • From: Phil Reid <preid@xxxxxxxxxxxxxxxxx>
• [PATCH v5 4/7] i2c: designware: add i2c gpio recovery option
  • From: Phil Reid <preid@xxxxxxxxxxxxxxxxx>
• [PATCH] MAINTAINERS: new maintainer for AT24 driver
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: Looking for AT24 maintainer
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v1 09/15] hwmon: (w83781d) Remove duplicate NULL check
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v1 03/15] i2c: thunderx: Remove duplicate NULL check
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v1 02/15] i2c: taos-evm: Remove duplicate NULL check
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v1 01/15] i2c: Make i2c_unregister_device() NULL-aware
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v2] i2c: xgene-slimpro: Support v2
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: mpc: remove useless variable initialization
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v11 00/10] Add sbs-manager with smbalert support
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 0/7 v3] I2C GPIO to use gpiolibs open drain
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH] i2c: use macro IS_ENABLED in header i2c.h
  • From: Stefan Lengfeld <contact@xxxxxxxxxxxxxxx>
• Re: [PATCH 09/12] PM / mfd: intel-lpss: Use DPM_FLAG_SMART_SUSPEND
  • From: "Rafael J. Wysocki" <rafael@xxxxxxxxxx>
• Re: [PATCH v4 1/7] i2c: Switch to using gpiod interface for gpio bus recovery
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH v4 4/7] i2c: designware: add i2c gpio recovery option
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• [PATCH v2 1/1] at24: support eeproms that do not roll over page reads.
  • From: Sven Van Asbroeck <svendev@xxxxxxxx>
• [PATCH v2 0/1] at24: support eeproms that do not roll over page reads.
  • From: Sven Van Asbroeck <svendev@xxxxxxxx>
• Re: [PATCH v1 09/15] hwmon: (w83781d) Remove duplicate NULL check
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v1 09/15] hwmon: (w83781d) Remove duplicate NULL check
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH RFC 3/4] i2c: at91: added slave mode support
  • From: Juergen Fitschen <me@xxxxxx>
• Re: [PATCH RFC 3/4] i2c: at91: added slave mode support
  • From: Juergen Fitschen <me@xxxxxx>
• Re: [PATCH RFC 4/4] i2c: at91: take slave mode capabilities of hardware into account
  • From: Juergen Fitschen <me@xxxxxx>
• Re: [PATCH 09/12] PM / mfd: intel-lpss: Use DPM_FLAG_SMART_SUSPEND
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: Looking for AT24 maintainer
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH] at24: support eeproms that do not roll over page reads.
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCH] at24: support eeproms that do not roll over page reads.
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCH] at24: support eeproms that do not roll over page reads.
  • From: kbuild test robot <lkp@xxxxxxxxx>
• [PATCH v4] i2c: aspeed: Deassert reset in probe
  • From: Joel Stanley <joel@xxxxxxxxx>
• Re: [PATCH v2] i2c: xgene-slimpro: Support v2
  • From: Hoan Tran <hotran@xxxxxxx>
• Re: [PATCH v1 12/15] hwmon: (w83793) Remove duplicate NULL check
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH v1 11/15] hwmon: (w83792d) Remove duplicate NULL check
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH v1 10/15] hwmon: (w83791d) Remove duplicate NULL check
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH v1 09/15] hwmon: (w83781d) Remove duplicate NULL check
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH v1 02/15] i2c: taos-evm: Remove duplicate NULL check
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH v1 08/15] drm/i2c: tda998x: Remove duplicate NULL check
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxx>
• Re: [PATCH 09/12] PM / mfd: intel-lpss: Use DPM_FLAG_SMART_SUSPEND
  • From: "Rafael J. Wysocki" <rafael@xxxxxxxxxx>
• i2c: qup: missing stop bit and messages
  • From: Damien Riegel <damien.riegel@xxxxxxxxxxxxxxxxxxxx>
• Re: Sluggish AT91 I2C driver causes SMBus timeouts
  • From: Ludovic Desroches <ludovic.desroches@xxxxxxxxxxxxx>
• Re: [PATCH RFC 3/4] i2c: at91: added slave mode support
  • From: Ludovic Desroches <ludovic.desroches@xxxxxxxxxxxxx>
• Re: [PATCH RFC 4/4] i2c: at91: take slave mode capabilities of hardware into account
  • From: Ludovic Desroches <ludovic.desroches@xxxxxxxxxxxxx>
• Re: [PATCH 09/12] PM / mfd: intel-lpss: Use DPM_FLAG_SMART_SUSPEND
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH RFC 2/4] i2c: at91: split driver into core and master file
  • From: Ludovic Desroches <ludovic.desroches@xxxxxxxxxxxxx>
• Re: [PATCH RFC 1/4] i2c: at91: segregate master mode specific code from probe and init func
  • From: Ludovic Desroches <ludovic.desroches@xxxxxxxxxxxxx>
• Re: [PATCH] I2C-S3C2410: Use common error handling code in s3c24xx_i2c_probe()
  • From: Ben Dooks <ben-linux@xxxxxxxxx>
• [PATCH v1 02/15] i2c: taos-evm: Remove duplicate NULL check
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 10/15] hwmon: (w83791d) Remove duplicate NULL check
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 12/15] hwmon: (w83793) Remove duplicate NULL check
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 04/15] ipmi_ssif: Remove duplicate NULL check
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 15/15] media: i2c: adv748x: Remove duplicate NULL check
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 05/15] gpio: max732x: Remove duplicate NULL check
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 14/15] media: adv7180: Remove duplicate checks
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 09/15] hwmon: (w83781d) Remove duplicate NULL check
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 06/15] drm/bridge: analogix-anx78xx: Remove duplicate NULL check
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 13/15] iio: imu: inv_mpu6050: Remove duplicate NULL check
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 08/15] drm/i2c: tda998x: Remove duplicate NULL check
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 07/15] drm/i2c/sil164: Remove duplicate NULL check
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 11/15] hwmon: (w83792d) Remove duplicate NULL check
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 01/15] i2c: Make i2c_unregister_device() NULL-aware
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 03/15] i2c: thunderx: Remove duplicate NULL check
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH RFC 0/4] i2c: at91: slave mode support
  • From: Ludovic Desroches <ludovic.desroches@xxxxxxxxxxxxx>
• Re: [PATCH v4 7/7] i2c: remove legacy integer scl/sda gpio for recovery
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v4 3/7] i2c: designware: rename i2c_dw_plat_prepare_clk to i2c_dw_prepare_clk
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v4 0/7] i2c: designware: add i2c gpio recovery option
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v2] i2c: xgene-slimpro: Support v2
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v4 1/7] i2c: Switch to using gpiod interface for gpio bus recovery
  • From: Phil Reid <preid@xxxxxxxxxxxxxxxxx>
• [PATCH v4 2/7] i2c: designware: move i2c_dw_plat_prepare_clk to common
  • From: Phil Reid <preid@xxxxxxxxxxxxxxxxx>
• [PATCH v4 7/7] i2c: remove legacy integer scl/sda gpio for recovery
  • From: Phil Reid <preid@xxxxxxxxxxxxxxxxx>
• [PATCH v4 5/7] i2c: imx: switch to using gpiod for bus recovery gpios
  • From: Phil Reid <preid@xxxxxxxxxxxxxxxxx>
• [PATCH v4 6/7] i2c: davinci: switch to using gpiod for bus recovery gpios
  • From: Phil Reid <preid@xxxxxxxxxxxxxxxxx>
• [PATCH v4 0/7] i2c: designware: add i2c gpio recovery option
  • From: Phil Reid <preid@xxxxxxxxxxxxxxxxx>
• [PATCH v4 3/7] i2c: designware: rename i2c_dw_plat_prepare_clk to i2c_dw_prepare_clk
  • From: Phil Reid <preid@xxxxxxxxxxxxxxxxx>
• [PATCH v4 4/7] i2c: designware: add i2c gpio recovery option
  • From: Phil Reid <preid@xxxxxxxxxxxxxxxxx>
• i2c-tools: i2cbusses: Avoid buffer overflows in sysfs paths
  • From: Jean Delvare <jdelvare@xxxxxxx>
• [PATCH v2] i2c: xgene-slimpro: Support v2
  • From: Hoan Tran <hotran@xxxxxxx>
• Re: [PATCH] i2c: xgene-slimpro: Support v2
  • From: Hoan Tran <hotran@xxxxxxx>
• Re: [PATCH v3] i2c: aspeed: Deassert reset in probe
  • From: Benjamin Herrenschmidt <benh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3] i2c: aspeed: Deassert reset in probe
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Looking for AT24 maintainer
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v3] i2c: aspeed: Deassert reset in probe
  • From: Philipp Zabel <philipp.zabel@xxxxxxxxx>
• [PATCH] at24: support eeproms that do not roll over page reads.
  • From: Sven Van Asbroeck <svendev@xxxxxxxx>
• Re: [PATCH v3] i2c: aspeed: Deassert reset in probe
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v2] i2c: omap: Trigger bus recovery in lockup case
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: i2c-tools 4.0 has been released
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• i2c-tools 4.0 has been released
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH v2] i2c: omap: Trigger bus recovery in lockup case
  • From: Claudio Foellmi <claudio.foellmi@xxxxxxxx>
• Re: [PULL REQUEST] i2c-mux for 4.15-rc1
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PULL REQUEST] i2c-mux for 4.15-rc1
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH 0/7 v3] I2C GPIO to use gpiolibs open drain
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v11 02/10] i2c: i2c-smbus: Move i2c_setup_smbus_alert from i2c-smbus to i2c-core-smbus
  • From: Phil Reid <preid@xxxxxxxxxxxxxxxxx>
• [PATCH v3] i2c: aspeed: Deassert reset in probe
  • From: Joel Stanley <joel@xxxxxxxxx>
• Re: [PATCH v2] i2c: aspeed: Deassert reset in probe
  • From: Joel Stanley <joel@xxxxxxxxx>
• Re: [PATCH 0/7 v3] I2C GPIO to use gpiolibs open drain
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 0/7 v3] I2C GPIO to use gpiolibs open drain
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH] i2c: pxa: move header file out of deprecated i2c folder
  • From: Robert Jarzmik <robert.jarzmik@xxxxxxx>
• Re: [PATCH] i2c: pxa: move header file out of deprecated i2c folder
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v2 0/4] i2c: pca-platform: additional improvements
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v11 02/10] i2c: i2c-smbus: Move i2c_setup_smbus_alert from i2c-smbus to i2c-core-smbus
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH 3/3] power: supply: sbs-message: fix some code style issues
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH 2/3] power: supply: sbs-battery: remove unchecked return var
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH 1/3] power: supply: sbs-battery: remove superfluous variable init
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH 0/3] power: supply: minor improvements to sbs-manager and battery
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v11 00/10] Add sbs-manager with smbalert support
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v11 00/10] Add sbs-manager with smbalert support
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• Re: [PATCH v11 00/10] Add sbs-manager with smbalert support
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: generic recovery: check SCL before SDA
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v2] i2c: omap: Trigger bus recovery in lockup case
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: xgene-slimpro: Support v2
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: xgene-slimpro: Support v2
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PULL REQUEST] i2c-mux for 4.15-rc1
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: xgene-slimpro: Support v2
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v2] i2c: img-scb: Add runtime PM
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH v2] i2c: img-scb: Add runtime PM
  • From: Ed Blake <ed.blake@xxxxxxxxxxx>
• Re: [PATCH] i2c: img-scb: Add runtime PM
  • From: Ed Blake <ed.blake@xxxxxxxxxxx>
• Re: [PULL REQUEST] i2c-mux for 4.15-rc1
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH] i2c: mpc: remove useless variable initialization
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [04/11] i2c: mpc: use of_property_read_bool
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: imx: Remove a useless test in 'i2c_imx_init_recovery_info()'
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: img-scb: Add runtime PM
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v2] i2c: riic: remove clock and frequency restrictions
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PULL REQUEST] i2c/cht-wc-fusb302-immutable branch for v4.15
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PULL REQUEST] i2c-mux for 4.15-rc1
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH v2] i2c: riic: remove clock and frequency restrictions
  • From: Chris Brandt <chris.brandt@xxxxxxxxxxx>
• RE: [PATCH] i2c: riic: remove clock and frequency restrictions
  • From: Chris Brandt <Chris.Brandt@xxxxxxxxxxx>
• [PATCH RFC 3/4] i2c: at91: added slave mode support
  • From: Juergen Fitschen <jfi@xxxxxxxxxxxxxxx>
• Re: [PATCH resend v5 3/3] platform/x86: intel_cht_int33fe: Update fusb302 type string, add properties
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH RFC 4/4] i2c: at91: take slave mode capabilities of hardware into account
  • From: Juergen Fitschen <me@xxxxxx>
• [PATCH RFC 0/4] i2c: at91: slave mode support
  • From: Juergen Fitschen <me@xxxxxx>
• [PATCH RFC 2/4] i2c: at91: split driver into core and master file
  • From: Juergen Fitschen <me@xxxxxx>
• [PATCH RFC 1/4] i2c: at91: segregate master mode specific code from probe and init func
  • From: Juergen Fitschen <me@xxxxxx>
• Re: [PATCH 0/7 v3] I2C GPIO to use gpiolibs open drain
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 0/7 v3] I2C GPIO to use gpiolibs open drain
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH resend v5 3/3] platform/x86: intel_cht_int33fe: Update fusb302 type string, add properties
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH resend v5 3/3] platform/x86: intel_cht_int33fe: Update fusb302 type string, add properties
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH resend v5 3/3] platform/x86: intel_cht_int33fe: Update fusb302 type string, add properties
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH 11/12] PM: i2c-designware-platdrv: Optimize power management
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• Re: [PATCH] i2c/busses: Convert timers to use timer_setup()
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v2] i2c: aspeed: Deassert reset in probe
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 11/12] PM: i2c-designware-platdrv: Optimize power management
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: riic: remove clock and frequency restrictions
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH resend v5 3/3] platform/x86: intel_cht_int33fe: Update fusb302 type string, add properties
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH resend v5 2/3] i2c-cht-wc: Add device-properties for fusb302 integration
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH resend v5 1/3] i2c: Allow overriding dev_name through board_info
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PULL REQUEST] i2c-mux for 4.15-rc1
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: davinci: use correct format identifier for size_t
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: designware: make *CNT values configurable
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Re: I2C-Octeon: Use common error handling code in octeon_i2c_probe()
  • From: SF Markus Elfring <elfring@xxxxxxxxxxxxxxxxxxxxx>
• Re: Sluggish AT91 I2C driver causes SMBus timeouts
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH] i2c: designware: make *CNT values configurable
  • From: Shikhar Dogra <shidogra@xxxxxxxxx>
• Re: [PATCH] I2C-Octeon: Use common error handling code in octeon_i2c_probe()
  • From: David Daney <ddaney@xxxxxxxxxxxxxxxxxx>
• Re: I2C-PIIX4: Use common error handling code in piix4_probe()
  • From: SF Markus Elfring <elfring@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] I2C-PIIX4: Use common error handling code in piix4_probe()
  • From: Jean Delvare <jdelvare@xxxxxxx>
• [PATCH] i2c-tools: Add examples to manual pages
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH] I2C-S3C2410: Use common error handling code in s3c24xx_i2c_probe()
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• [PATCH] I2C-S3C2410: Use common error handling code in s3c24xx_i2c_probe()
  • From: SF Markus Elfring <elfring@xxxxxxxxxxxxxxxxxxxxx>
• [PATCH] I2C-PIIX4: Use common error handling code in piix4_probe()
  • From: SF Markus Elfring <elfring@xxxxxxxxxxxxxxxxxxxxx>
• [PATCH] I2C-Octeon: Use common error handling code in octeon_i2c_probe()
  • From: SF Markus Elfring <elfring@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: stm32: Fixes multibyte transfer for STM32F4 I2C controller
  • From: Radosław Pietrzyk <radoslaw.pietrzyk@xxxxxxxxx>
• Re: [PATCH 04/12] PM / core: Add SMART_SUSPEND driver flag
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• Re: [PATCH 04/12] PM / core: Add SMART_SUSPEND driver flag
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• [PATCH] i2c: xgene-slimpro: Support v2
  • From: Hoan Tran <hotran@xxxxxxx>
• Re: [Update][PATCH v2 01/12] PM / core: Add NEVER_SKIP and SMART_PREPARE driver flags
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• Re: [PATCH 10/12] PM / core: Add LEAVE_SUSPENDED driver flag
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH 07/12] ACPI / LPSS: Consolidate runtime PM and system sleep handling
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH 05/12] PCI / PM: Drop unnecessary invocations of pcibios_pm_ops callbacks
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH 04/12] PM / core: Add SMART_SUSPEND driver flag
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH 03/12] PM: i2c-designware-platdrv: Use DPM_FLAG_SMART_PREPARE
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH 02/12] PCI / PM: Use the NEVER_SKIP driver flag
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [Update][PATCH v2 01/12] PM / core: Add NEVER_SKIP and SMART_PREPARE driver flags
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• i801_smbus / smo8800 irq clash? pcim_enable_device() fails
  • From: Domen Puncer Kugler <domen@xxxxxx>
• Re: [PATCH v5 0/3] i2c: Hookup typec power-negotation to the PMIC and charger
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 0/12] PM / sleep: Driver flags for system suspend/resume
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• Re: [PATCH 0/12] PM / sleep: Driver flags for system suspend/resume
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: [PATCH v5 0/3] i2c: Hookup typec power-negotation to the PMIC and charger
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: mux: reg: use of_property_read_bool()
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PULL REQUEST] i2c-mux for 4.15-rc1
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [Update][PATCH v2 01/12] PM / core: Add NEVER_SKIP and SMART_PREPARE driver flags
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• Re: [Update][PATCH v2 01/12] PM / core: Add NEVER_SKIP and SMART_PREPARE driver flags
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [Update][PATCH v2 01/12] PM / core: Add NEVER_SKIP and SMART_PREPARE driver flags
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• Re: [PATCH 0/12] PM / sleep: Driver flags for system suspend/resume
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH 0/12] PM / sleep: Driver flags for system suspend/resume
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH] Fix Bug for cadence i2c interrupt overrunning buffer
  • From: Harini Katakam <harinikatakamlinux@xxxxxxxxx>
• [PULL REQUEST] i2c for 4.14
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 0/12] PM / sleep: Driver flags for system suspend/resume
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• Re: [PATCH 0/12] PM / sleep: Driver flags for system suspend/resume
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCH 0/12] PM / sleep: Driver flags for system suspend/resume
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH 0/12] PM / sleep: Driver flags for system suspend/resume
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH 0/12] PM / sleep: Driver flags for system suspend/resume
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH 0/12] PM / sleep: Driver flags for system suspend/resume
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCH 4/5] i2c: gpio: Augment all boardfiles to use open drain
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: i2c-tools 4.0
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH v5 0/3] i2c: Hookup typec power-negotation to the PMIC and charger
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v5 0/3] i2c: Hookup typec power-negotation to the PMIC and charger
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 0/7 v3] I2C GPIO to use gpiolibs open drain
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 0/7 v3] I2C GPIO to use gpiolibs open drain
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 0/12] PM / sleep: Driver flags for system suspend/resume
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH] i2c: designware: Don't set SCL timings and speed mode when in slave mode
  • From: Luis Oliveira <Luis.Oliveira@xxxxxxxxxxxx>
• Re: [PATCH] i2c: designware: Don't set SCL timings and speed mode when in slave mode
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH 0/12] PM / sleep: Driver flags for system suspend/resume
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [Update][PATCH v2 01/12] PM / core: Add NEVER_SKIP and SMART_PREPARE driver flags
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: davinci: use correct format identifier for size_t
  • From: Sekhar Nori <nsekhar@xxxxxx>
• Re: [PATCH] irqchip/aspeed-i2c-ic: Fix return value check in aspeed_i2c_ic_of_init()
  • From: Brendan Higgins <brendanhiggins@xxxxxxxxxx>
• [Update][PATCH v2 01/12] PM / core: Add NEVER_SKIP and SMART_PREPARE driver flags
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• Re: [PATCH 0/12] PM / sleep: Driver flags for system suspend/resume
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• Re: [PATCH 0/12] PM / sleep: Driver flags for system suspend/resume
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• Re: [PATCH 0/12] PM / sleep: Driver flags for system suspend/resume
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• Re: [PATCH v2] i2c: aspeed: Deassert reset in probe
  • From: Philipp Zabel <philipp.zabel@xxxxxxxxx>
• i2cset doesn't work on ASUS 22T1E via Nvidia GeForce 1050 Ti and HDMI
  • From: tim@xxxxxxxxxx
• Re: [PATCH 0/12] PM / sleep: Driver flags for system suspend/resume
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCH v6] eeprom: at24: Add OF device ID table
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxx>
• Re: [PATCH v2] i2c: aspeed: Deassert reset in probe
  • From: Brendan Higgins <brendanhiggins@xxxxxxxxxx>
• Re: [PATCH] i2c: riic: remove clock and frequency restrictions
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• RE: [PATCH] i2c: riic: remove clock and frequency restrictions
  • From: Chris Brandt <Chris.Brandt@xxxxxxxxxxx>
• Re: [PATCH] i2c: riic: remove clock and frequency restrictions
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• RE: [PATCH] i2c: riic: remove clock and frequency restrictions
  • From: Chris Brandt <Chris.Brandt@xxxxxxxxxxx>
• Re: [PATCH] i2c: riic: remove clock and frequency restrictions
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• RE: [PATCH] i2c: riic: remove clock and frequency restrictions
  • From: Chris Brandt <Chris.Brandt@xxxxxxxxxxx>
• [PATCH v2] i2c: aspeed: Deassert reset in probe
  • From: Joel Stanley <joel@xxxxxxxxx>
• Re: [PATCH] i2c: riic: remove clock and frequency restrictions
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH 0/12] PM / sleep: Driver flags for system suspend/resume
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• [PATCH] i2c: riic: remove clock and frequency restrictions
  • From: Chris Brandt <chris.brandt@xxxxxxxxxxx>
• Re: [PATCH 0/12] PM / sleep: Driver flags for system suspend/resume
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• Re: I2C slave mode for i2c-at91 driver
  • From: Juergen Fitschen <me@xxxxxx>
• Re: I2C slave mode for i2c-at91 driver
  • From: Juergen Fitschen <me@xxxxxx>
• Re: [PATCH 0/12] PM / sleep: Driver flags for system suspend/resume
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH 0/12] PM / sleep: Driver flags for system suspend/resume
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH 0/12] PM / sleep: Driver flags for system suspend/resume
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• Re: [PATCH] Fix Bug for cadence i2c interrupt overrunning buffer
  • From: Andrew Worsley <amworsley@xxxxxxxxx>
• Re: I2C slave mode for i2c-at91 driver
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: I2C slave mode for i2c-at91 driver
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: I2C slave mode for i2c-at91 driver
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: I2C slave mode for i2c-at91 driver
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH 01/12] PM / core: Add NEVER_SKIP and SMART_PREPARE driver flags
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v6] eeprom: at24: Add OF device ID table
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH 0/12] PM / sleep: Driver flags for system suspend/resume
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• Re: [PATCH 0/12] PM / sleep: Driver flags for system suspend/resume
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• Re: [PATCH v2 1/4] dt-bindings: media: Binding document for Qualcomm Camera Control Interface driver
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH] i2c: davinci: use correct format identifier for size_t
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: omap: Fix error handlign for clk_get()
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v3] i2c: riic: remove fixed clock restriction
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: rcar: document R8A77970 bindings
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: sh_mobile: Use of_device_get_match_data() helper
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v2 3/3] i2c: xlp9xx: Handle I2C_M_RECV_LEN in msg->flags
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v2 2/3] i2c: xlp9xx: Get clock frequency with clk API
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v2 1/3] ACPI / APD: Add clock frequency for ThunderX2 I2C controller
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: designware: make const array supported_speeds static to shink object code size
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v6] eeprom: at24: Add OF device ID table
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v4 1/2] i2c: davinci: Add PM Runtime Support
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v4 2/2] dt-bindings: i2c: i2c-davinci: Update binding for 66AK2Gx pwr dm property
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v6] eeprom: at24: Add OF device ID table
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v6] eeprom: at24: Add OF device ID table
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v7 2/3] eeprom: at24: add support to fetch eeprom device property "size"
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v7 3/3] eeprom: at24: enable runtime pm support
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v7 1/3] dt-bindings: add eeprom "size" property
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: meson: use generic compatible
  • From: Rob Herring <robh@xxxxxxxxxx>
• RE: [PATCH v3] i2c: riic: remove fixed clock restriction
  • From: Chris Brandt <Chris.Brandt@xxxxxxxxxxx>
• Re: [PATCH 0/12] PM / sleep: Driver flags for system suspend/resume
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 0/12] PM / sleep: Driver flags for system suspend/resume
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH 12/12] PM / core: Add AVOID_RPM driver flag
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 12/12] PM / core: Add AVOID_RPM driver flag
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• Re: [PATCH 12/12] PM / core: Add AVOID_RPM driver flag
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 01/12] PM / core: Add NEVER_SKIP and SMART_PREPARE driver flags
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• Re: [PATCH 0/12] PM / sleep: Driver flags for system suspend/resume
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: stm32: Fixes multibyte transfer for STM32F4 I2C controller
  • From: Pierre Yves MORDRET <pierre-yves.mordret@xxxxxx>
• Re: [PATCH] i2c: stm32: Fixes multibyte transfer for STM32F4 I2C controller
  • From: Radosław Pietrzyk <radoslaw.pietrzyk@xxxxxxxxx>
• Re: [PATCH 01/12] PM / core: Add NEVER_SKIP and SMART_PREPARE driver flags
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: stm32: Fixes multibyte transfer for STM32F4 I2C controller
  • From: Pierre Yves MORDRET <pierre-yves.mordret@xxxxxx>
• I2C slave mode for i2c-at91 driver
  • From: Juergen Fitschen <me@xxxxxx>
• Re: [PATCH 0/12] PM / sleep: Driver flags for system suspend/resume
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: Sluggish AT91 I2C driver causes SMBus timeouts
  • From: Ludovic Desroches <ludovic.desroches@xxxxxxxxxxxxx>
• Re: [PATCH 01/12] PM / core: Add NEVER_SKIP and SMART_PREPARE driver flags
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH] i2c/busses: Convert timers to use timer_setup()
  • From: Kees Cook <keescook@xxxxxxxxxxxx>
• Re: [PATCH 2/4] i2c: Add Qualcomm Camera Control Interface driver
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH 01/12] PM / core: Add NEVER_SKIP and SMART_PREPARE driver flags
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• Re: [PATCH 01/12] PM / core: Add NEVER_SKIP and SMART_PREPARE driver flags
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• Re: [PATCH 01/12] PM / core: Add NEVER_SKIP and SMART_PREPARE driver flags
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• Re: [PATCH 01/12] PM / core: Add NEVER_SKIP and SMART_PREPARE driver flags
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• Re: [PATCH 0/12] PM / sleep: Driver flags for system suspend/resume
  • From: "Rafael J. Wysocki" <rafael@xxxxxxxxxx>
• [PATCH] i2c: omap: Fix error handlign for clk_get()
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 01/12] PM / core: Add NEVER_SKIP and SMART_PREPARE driver flags
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH v3] i2c: riic: remove fixed clock restriction
  • From: Chris Brandt <chris.brandt@xxxxxxxxxxx>
• RE: [PATCH v2] i2c: riic: remove fixed clock restriction
  • From: Chris Brandt <Chris.Brandt@xxxxxxxxxxx>
• Re: [PATCH] Fix Bug for cadence i2c interrupt overrunning buffer
  • From: Harini Katakam <harinikatakamlinux@xxxxxxxxx>
• Re: [PATCH] Fix Bug for cadence i2c interrupt overrunning buffer
  • From: Andrew Worsley <amworsley@xxxxxxxxx>
• Re: [PATCH 0/12] PM / sleep: Driver flags for system suspend/resume
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 01/12] PM / core: Add NEVER_SKIP and SMART_PREPARE driver flags
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 01/12] PM / core: Add NEVER_SKIP and SMART_PREPARE driver flags
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] Fix Bug for cadence i2c interrupt overrunning buffer
  • From: Harini Katakam <harinikatakamlinux@xxxxxxxxx>
• Re: [PATCH] Fix Bug for cadence i2c interrupt overrunning buffer
  • From: Michal Simek <michal.simek@xxxxxxxxxx>
• Re: [PATCH 01/12] PM / core: Add NEVER_SKIP and SMART_PREPARE driver flags
  • From: Lukas Wunner <lukas@xxxxxxxxx>
• RE: [PATCH 1/1] i2c: i801: Restore the presence state of P2SB PCI device after reading BAR
  • From: "Zhuo, Qiuxu" <qiuxu.zhuo@xxxxxxxxx>
• [PATCH 07/12] ACPI / LPSS: Consolidate runtime PM and system sleep handling
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• [PATCH 08/12] ACPI / PM: Take SMART_SUSPEND driver flag into account
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• [PATCH 12/12] PM / core: Add AVOID_RPM driver flag
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• [PATCH 11/12] PM: i2c-designware-platdrv: Optimize power management
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• [PATCH 06/12] PCI / PM: Take SMART_SUSPEND driver flag into account
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• [PATCH 05/12] PCI / PM: Drop unnecessary invocations of pcibios_pm_ops callbacks
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• [PATCH 10/12] PM / core: Add LEAVE_SUSPENDED driver flag
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• [PATCH 04/12] PM / core: Add SMART_SUSPEND driver flag
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• [PATCH 03/12] PM: i2c-designware-platdrv: Use DPM_FLAG_SMART_PREPARE
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• [PATCH 02/12] PCI / PM: Use the NEVER_SKIP driver flag
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• [PATCH 09/12] PM / mfd: intel-lpss: Use DPM_FLAG_SMART_SUSPEND
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• [PATCH 01/12] PM / core: Add NEVER_SKIP and SMART_PREPARE driver flags
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• [PATCH 0/12] PM / sleep: Driver flags for system suspend/resume
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• Re: [PATCH v5 0/3] i2c: Hookup typec power-negotation to the PMIC and charger
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v5 0/3] i2c: Hookup typec power-negotation to the PMIC and charger
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH] i2c: mux: reg: use of_property_read_bool()
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH v2] i2c: riic: remove fixed clock restriction
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: pxa: move header file out of deprecated i2c folder
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: pxa: move header file out of deprecated i2c folder
  • From: Robert Jarzmik <robert.jarzmik@xxxxxxx>
• RE: [PATCH v2] i2c: riic: remove fixed clock restriction
  • From: Chris Brandt <Chris.Brandt@xxxxxxxxxxx>
• Re: [PATCH v3] i2c: piix4: Disable completely the IMC during SMBUS_BLOCK_DATA
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v3] i2c: piix4: Disable completely the IMC during SMBUS_BLOCK_DATA
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: piix4: Fix SMBus port selection for AMD Family 17h chips
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v2] i2c: riic: remove fixed clock restriction
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v3] i2c: piix4: Disable completely the IMC during SMBUS_BLOCK_DATA
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] Fix Bug for cadence i2c interrupt overrunning buffer
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: aspeed: Deassert reset in probe
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: imx: fix misleading bus recovery debug message
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c:imx: use IRQF_SHARED mode to request IRQ
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: Sluggish AT91 I2C driver causes SMBus timeouts
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: Sluggish AT91 I2C driver causes SMBus timeouts
  • From: Alan Cox <gnomes@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/1] i2c: i801: Restore the presence state of P2SB PCI device after reading BAR
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH] i2c: rcar: document R8A77970 bindings
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH] i2c: rcar: document R8A77970 bindings
  • From: Simon Horman <horms@xxxxxxxxxxxx>
• Re: [PATCH] i2c: rcar: document R8A77970 bindings
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• [PATCH] i2c: rcar: document R8A77970 bindings
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: mux: reg: use of_property_read_bool()
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• [PATCH v2 2/4] i2c: Add Qualcomm Camera Control Interface driver
  • From: Todor Tomov <todor.tomov@xxxxxxxxxx>
• [PATCH v2 4/4] arm64: dts: qcom: Add Camera Control Interface support
  • From: Todor Tomov <todor.tomov@xxxxxxxxxx>
• [PATCH v2 0/4] Qualcomm Camera Control Interface driver
  • From: Todor Tomov <todor.tomov@xxxxxxxxxx>
• [PATCH v2 1/4] dt-bindings: media: Binding document for Qualcomm Camera Control Interface driver
  • From: Todor Tomov <todor.tomov@xxxxxxxxxx>
• [PATCH v2 3/4] MAINTAINERS: Add Qualcomm Camera Control Interface driver
  • From: Todor Tomov <todor.tomov@xxxxxxxxxx>
• [PATCH] i2c: meson: use generic compatible
  • From: Jerome Brunet <jbrunet@xxxxxxxxxxxx>
• Re: Sluggish AT91 I2C driver causes SMBus timeouts
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: Sluggish AT91 I2C driver causes SMBus timeouts
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH 1/4] dt-bindings: media: Binding document for Qualcomm Camera Control Interface driver
  • From: Todor Tomov <todor.tomov@xxxxxxxxxx>
• Re: [PATCH 2/4] i2c: Add Qualcomm Camera Control Interface driver
  • From: Todor Tomov <todor.tomov@xxxxxxxxxx>
• Re: Sluggish AT91 I2C driver causes SMBus timeouts
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: Sluggish AT91 I2C driver causes SMBus timeouts
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: i2c-tools 4.0
  • From: Ondřej Lysoněk <olysonek@xxxxxxxxxx>
• Sluggish AT91 I2C driver causes SMBus timeouts
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH] i2c: stm32: Fixes multibyte transfer for STM32F4 I2C controller
  • From: Radosław Pietrzyk <radoslaw.pietrzyk@xxxxxxxxx>
• Re: [PATCH] i2c: stm32: Fixes multibyte transfer for STM32F4 I2C controller
  • From: Pierre Yves MORDRET <pierre-yves.mordret@xxxxxx>
• RE: [PATCH v2] i2c: riic: remove fixed clock restriction
  • From: Chris Brandt <Chris.Brandt@xxxxxxxxxxx>
• Re: [PATCH v2 1/3] ACPI / APD: Add clock frequency for ThunderX2 I2C controller
  • From: "Rafael J. Wysocki" <rafael@xxxxxxxxxx>
• Re: [PATCH v2 0/3] i2c-xlp9xx: update i2c driver to handle I2C_M_RECV_LEN flag
  • From: "Rafael J. Wysocki" <rafael@xxxxxxxxxx>
• [PATCH] i2c: stm32: Fixes multibyte transfer for STM32F4 I2C controller
  • From: Radoslaw Pietrzyk <radoslaw.pietrzyk@xxxxxxxxx>
• [PATCH] irqchip/aspeed-i2c-ic: Fix return value check in aspeed_i2c_ic_of_init()
  • From: Wei Yongjun <weiyongjun1@xxxxxxxxxx>
• RE: [Adi-buildroot-devel] [PATCH 4/7] i2c: gpio: Augment all boardfiles to use open drain
  • From: "Wu, Aaron" <Aaron.Wu@xxxxxxxxxx>
• [PATCH resend v5 2/3] i2c-cht-wc: Add device-properties for fusb302 integration
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH resend v5 3/3] platform/x86: intel_cht_int33fe: Update fusb302 type string, add properties
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH resend v5 1/3] i2c: Allow overriding dev_name through board_info
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v5 0/3] i2c: Hookup typec power-negotation to the PMIC and charger
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH] i2c:imx: use IRQF_SHARED mode to request IRQ
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH] i2c:imx: use IRQF_SHARED mode to request IRQ
  • From: Wei Jinhua <wei.jinhua1@xxxxxxxxxx>
• Re: [PATCH v2 0/3] i2c-xlp9xx: update i2c driver to handle I2C_M_RECV_LEN flag
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v2 0/3] i2c-xlp9xx: update i2c driver to handle I2C_M_RECV_LEN flag
  • From: "Rafael J. Wysocki" <rafael@xxxxxxxxxx>
• Re: [PATCH v3] i2c: piix4: Disable completely the IMC during SMBUS_BLOCK_DATA
  • From: Jean Delvare <jdelvare@xxxxxxx>
• [PATCH v3] i2c: piix4: Disable completely the IMC during SMBUS_BLOCK_DATA
  • From: Ricardo Ribalda Delgado <ricardo.ribalda@xxxxxxxxx>
• Re: [PATCH v2] i2c: piix4: Disable completely the IMC during SMBUS_BLOCK_DATA
  • From: Jean Delvare <jdelvare@xxxxxxx>
• [PATCH v2] i2c: piix4: Disable completely the IMC during SMBUS_BLOCK_DATA
  • From: Ricardo Ribalda Delgado <ricardo.ribalda@xxxxxxxxx>
• Re: [PATCH] i2c: piix4: Disable completely the IMC during SMBUS_BLOCK_DATA
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH] i2c: imx: fix misleading bus recovery debug message
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH v2 3/3] i2c: xlp9xx: Handle I2C_M_RECV_LEN in msg->flags
  • From: Kamlakant Patel <kamlakant.patel@xxxxxxxxxx>
• [PATCH v2 2/3] i2c: xlp9xx: Get clock frequency with clk API
  • From: Kamlakant Patel <kamlakant.patel@xxxxxxxxxx>
• [PATCH v2 1/3] ACPI / APD: Add clock frequency for ThunderX2 I2C controller
  • From: Kamlakant Patel <kamlakant.patel@xxxxxxxxxx>
• [PATCH v2 0/3] i2c-xlp9xx: update i2c driver to handle I2C_M_RECV_LEN flag
  • From: Kamlakant Patel <kamlakant.patel@xxxxxxxxxx>
• [PATCH v7 3/3] eeprom: at24: enable runtime pm support
  • From: Divagar Mohandass <divagar.mohandass@xxxxxxxxx>
• [PATCH v7 2/3] eeprom: at24: add support to fetch eeprom device property "size"
  • From: Divagar Mohandass <divagar.mohandass@xxxxxxxxx>
• [PATCH v7 1/3] dt-bindings: add eeprom "size" property
  • From: Divagar Mohandass <divagar.mohandass@xxxxxxxxx>
• [PATCH v7 0/3] enable eeprom "size" property and runtime pm
  • From: Divagar Mohandass <divagar.mohandass@xxxxxxxxx>
• [PATCH] i2c: aspeed: Deassert reset in probe
  • From: Joel Stanley <joel@xxxxxxxxx>
• Re: [PATCH v6 3/3] eeprom: at24: enable runtime pm support
  • From: Tomasz Figa <tfiga@xxxxxxxxxxxx>
• Re: [PATCH v6 3/3] eeprom: at24: enable runtime pm support
  • From: Tomasz Figa <tfiga@xxxxxxxxxxxx>
• [PATCH] i2c: imx: fix misleading bus recovery debug message
  • From: Clemens Gruber <clemens.gruber@xxxxxxxxxxxx>
• Re: [PATCH] [media] ov5645: I2C address change
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: ismt: Separate I2C block read from SMBus block read
  • From: Stephen Douthit <stephend@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH] [media] ov5645: I2C address change
  • From: Todor Tomov <todor.tomov@xxxxxxxxxx>
• Re: [PATCH 4/7] i2c: gpio: Augment all boardfiles to use open drain
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH 1/7] i2c: gpio: Convert to use descriptors
  • From: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
• Re: [PATCH] [media] ov5645: I2C address change
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH] [media] ov5645: I2C address change
  • From: Sakari Ailus <sakari.ailus@xxxxxx>
• Re: [PATCH] [media] ov5645: I2C address change
  • From: Todor Tomov <todor.tomov@xxxxxxxxxx>
• RE: [PATCH v6 3/3] eeprom: at24: enable runtime pm support
  • From: "Mohandass, Divagar" <divagar.mohandass@xxxxxxxxx>
• [PULL REQUEST] i2c for 4.14
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: ismt: Separate I2C block read from SMBus block read
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] Fix Bug for cadence i2c interrupt overrunning buffer
  • From: Andrew Worsley <amworsley@xxxxxxxxx>
• Re: [PATCH] i2c: ismt: Separate I2C block read from SMBus block read
  • From: Stephen Douthit <stephend@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 4/7] i2c: gpio: Augment all boardfiles to use open drain
  • From: Robert Jarzmik <robert.jarzmik@xxxxxxx>
• Re: [PATCH] i2c: piix4: Fix SMBus port selection for AMD Family 17h chips
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] i2c-omap: Trigger bus recovery in lockup case
  • From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxxxx>
• Re: [PATCH v4 5/5] ARM: dts: stm32: Add I2C1 support for STM32F746 eval board
  • From: Alexandre Torgue <alexandre.torgue@xxxxxx>
• Re: [PATCH v4 4/5] ARM: dts: stm32: Add I2C1 support for STM32F746 SoC
  • From: Alexandre Torgue <alexandre.torgue@xxxxxx>
• Re: [PATCH v1] i2c:i2c-stm32f7: fix setup structure
  • From: Pierre Yves MORDRET <pierre-yves.mordret@xxxxxx>
• Re: [PATCH v3 4/4] i2c: designware: add i2c gpio recovery option
  • From: Phil Reid <preid@xxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/4] dt-bindings: media: Binding document for Qualcomm Camera Control Interface driver
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH 2/4] i2c: Add Qualcomm Camera Control Interface driver
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH v2 2/2] dt-bindings: i2c: Update documentation for "mv78230-a0-i2c"
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] i2c: piix4: Fix SMBus port selection for AMD Family 17h chips
  • From: Rudolf Marek <r.marek@xxxxxxxxxxxx>
• Re: [PATCH] i2c: piix4: Fix SMBus port selection for AMD Family 17h chips
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] i2c: piix4: Fix SMBus port selection for AMD Family 17h chips
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: piix4: Disable completely the IMC during SMBUS_BLOCK_DATA
  • From: Ricardo Ribalda Delgado <ricardo.ribalda@xxxxxxxxx>
• Re: [PATCH] i2c: piix4: Fix SMBus port selection for AMD Family 17h chips
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH] i2c: piix4: Disable completely the IMC during SMBUS_BLOCK_DATA
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH] i2c: ismt: Separate I2C block read from SMBus block read
  • From: Pontus Andersson <epontan@xxxxxxxxx>
• [PATCH] i2c: generic recovery: check SCL before SDA
  • From: Claudio Foellmi <claudio.foellmi@xxxxxxxx>
• Re: [PATCH] i2c: ismt: Separate I2C block read from SMBus block read
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v2] i2c: omap: Trigger bus recovery in lockup case
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCH] Fix Bug for cadence i2c interrupt overrunning buffer
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 2/3] i2c: Cocci spatch "of_table"
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: piix4: Disable completely the IMC during SMBUS_BLOCK_DATA
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: designware: Don't set SCL timings and speed mode when in slave mode
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: i801: Add support for Intel Cedar Fork
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v1] i2c:i2c-stm32f7: fix setup structure
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] dt-bindings: i2c: Update documentation for "mv78230-a0-i2c"
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH 7/7 v3] i2c: gpio: Add support for named gpios in DT
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 6/7 v3] dt-bindings: i2c: i2c-gpio: Add support for named gpios
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 5/7 v3] i2c: gpio: Local vars in probe
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 4/7 v3] i2c: gpio: Augment all boardfiles to use open drain
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 3/7 v3] i2c: gpio: Enforce open drain through gpiolib
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 2/7 v3] gpio: Make it possible for consumers to enforce open drain
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 1/7 v3] i2c: gpio: Convert to use descriptors
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 0/7 v3] I2C GPIO to use gpiolibs open drain
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v4 3/3] PM: i2c-designware-platdrv: Suspend/resume at the late/early stages
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v4 2/3] PM / mfd: intel-lpss: Push system sleep callbacks to late/early stages
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [Update][PATCH v5 1/3] PM: i2c-designware-platdrv: Clean up PM handling in probe
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: sh_mobile: Use of_device_get_match_data() helper
  • From: Simon Horman <horms@xxxxxxxxxxxx>
• Re: [PATCH v2] i2c: omap: Trigger bus recovery in lockup case
  • From: Vignesh R <vigneshr@xxxxxx>
• Re: [PATCH] dt-bindings: i2c: Add armada-38x i2c binding
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: i2c: Add armada-38x i2c binding
  • From: Gregory CLEMENT <gregory.clement@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: i2c: Add armada-38x i2c binding
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH] i2c: sh_mobile: Use of_device_get_match_data() helper
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• Re: [PATCH 1/7] i2c: gpio: Convert to use descriptors
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH] [media] ov5645: I2C address change
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v3 0/4] i2c: designware: add i2c gpio recovery option
  • From: Ferry Toth <ftoth@xxxxxxxxxx>
• [PATCH v2] i2c: omap: Trigger bus recovery in lockup case
  • From: Claudio Foellmi <claudio.foellmi@xxxxxxxx>
• Re: [PATCH] dt-bindings: i2c: Add armada-38x i2c binding
  • From: Gregory CLEMENT <gregory.clement@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: i2c: Add armada-38x i2c binding
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v6 3/3] eeprom: at24: enable runtime pm support
  • From: "sakari.ailus@xxxxxx" <sakari.ailus@xxxxxx>
• Re: [PATCH v6 3/3] eeprom: at24: enable runtime pm support
  • From: "sakari.ailus@xxxxxx" <sakari.ailus@xxxxxx>
• Re: [PATCH] i2c-omap: Trigger bus recovery in lockup case
  • From: Vignesh R <vigneshr@xxxxxx>
• Re: i2c-omap.c vs. qemu: too much work in one irq (and broken boot)
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH v4 2/3] PM / mfd: intel-lpss: Push system sleep callbacks to late/early stages
  • From: "Rafael J. Wysocki" <rafael@xxxxxxxxxx>
• Re: [PATCH] i2c-omap: Trigger bus recovery in lockup case
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCH 1/7] i2c: gpio: Convert to use descriptors
  • From: Ben Dooks <ben.dooks@xxxxxxxxxxxxxxx>
• [PATCH 0/4] Qualcomm Camera Control Interface driver
  • From: Todor Tomov <todor.tomov@xxxxxxxxxx>
• [PATCH 2/4] i2c: Add Qualcomm Camera Control Interface driver
  • From: Todor Tomov <todor.tomov@xxxxxxxxxx>
• [PATCH 4/4] arm64: dts: qcom: Add Camera Control Interface support
  • From: Todor Tomov <todor.tomov@xxxxxxxxxx>
• [PATCH 1/4] dt-bindings: media: Binding document for Qualcomm Camera Control Interface driver
  • From: Todor Tomov <todor.tomov@xxxxxxxxxx>
• [PATCH 3/4] MAINTAINERS: Add Qualcomm Camera Control Interface driver
  • From: Todor Tomov <todor.tomov@xxxxxxxxxx>
• Re: [PATCH v2 2/2] dt-bindings: i2c: Update documentation for "mv78230-a0-i2c"
  • From: Gregory CLEMENT <gregory.clement@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/2] ARM: dts: Fix I2C repeated start issue on Armada-38x
  • From: Gregory CLEMENT <gregory.clement@xxxxxxxxxxxxxxxxxx>
• [PATCH] i2c: ismt: Separate I2C block read from SMBus block read
  • From: Pontus Andersson <epontan@xxxxxxxxx>
• [PATCH] i2c: img-scb: Add runtime PM
  • From: Ed Blake <ed.blake@xxxxxxxxxxx>
• Re: i2c-omap.c vs. qemu: too much work in one irq (and broken boot)
  • From: Pali Rohár <pali.rohar@xxxxxxxxx>
• Re: [PATCH 1/7] i2c: gpio: Convert to use descriptors
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: i2c-omap.c vs. qemu: too much work in one irq (and broken boot)
  • From: Pavel Machek <pavel@xxxxxx>
• i2c-omap.c vs. qemu: too much work in one irq (and broken boot)
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH v5 2/2] add w1_ds28e17 driver for the DS28E17 Onewire to I2C master bridge
  • From: Jan Kandziora <jjj@xxxxxx>
• [PATCH v6] eeprom: at24: Add OF device ID table
  • From: Javier Martinez Canillas <javierm@xxxxxxxxxx>
• Re: [PATCH v5 2/2] add w1_ds28e17 driver for the DS28E17 Onewire to I2C master bridge
  • From: Evgeniy Polyakov <zbr@xxxxxxxxxxx>
• [PATCH v2] i2c: riic: remove fixed clock restriction
  • From: Chris Brandt <chris.brandt@xxxxxxxxxxx>
• RE: [PATCH] i2c: riic: remove fixed clock restriction
  • From: Chris Brandt <Chris.Brandt@xxxxxxxxxxx>
• Re: [PATCH] i2c-omap: Trigger bus recovery in lockup case
  • From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: riic: remove fixed clock restriction
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• [PATCH] i2c: riic: remove fixed clock restriction
  • From: Chris Brandt <chris.brandt@xxxxxxxxxxx>
• Re: [PATCH] i2c-omap: Trigger bus recovery in lockup case
  • From: Claudio Foellmi <claudio.foellmi@xxxxxxxx>
• Re: [PATCH] i2c-omap: Trigger bus recovery in lockup case
  • From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 1/4] i2c: Switch to using gpiod interface for gpio bus recovery
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 4/4] i2c: designware: add i2c gpio recovery option
  • From: Phil Reid <preid@xxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 1/4] i2c: Switch to using gpiod interface for gpio bus recovery
  • From: Phil Reid <preid@xxxxxxxxxxxxxxxxx>
• Re: i2c-ismt timeout
  • From: Daniel Versick <danls@xxxxxxxxxx>
• [PATCH v2 0/2] Fix I2C repeated start timing violation on Armada-38x.
  • From: Kalyan Kinthada <kalyan.kinthada@xxxxxxxxxxxxxxxxxxx>
• [PATCH v2 2/2] dt-bindings: i2c: Update documentation for "mv78230-a0-i2c"
  • From: Kalyan Kinthada <kalyan.kinthada@xxxxxxxxxxxxxxxxxxx>
• [PATCH v2 1/2] ARM: dts: Fix I2C repeated start issue on Armada-38x
  • From: Kalyan Kinthada <kalyan.kinthada@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v4 2/3] PM / mfd: intel-lpss: Push system sleep callbacks to late/early stages
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• Re: [PATCH v4 2/3] PM / mfd: intel-lpss: Push system sleep callbacks to late/early stages
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v3 4/4] i2c: designware: add i2c gpio recovery option
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 3/4] i2c: designware: rename i2c_dw_plat_prepare_clk to i2c_dw_prepare_clk
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 2/4] i2c: designware: move i2c_dw_plat_prepare_clk to common
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Re: i2c-ismt timeout
  • From: Neil Horman <nhorman@xxxxxxxxxxxxx>
• Re: [PATCH v3 4/4] i2c: designware: add i2c gpio recovery option
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 1/4] i2c: Switch to using gpiod interface for gpio bus recovery
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 0/4] i2c: designware: add i2c gpio recovery option
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 1/4] i2c: Switch to using gpiod interface for gpio bus recovery
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 1/4] i2c: Switch to using gpiod interface for gpio bus recovery
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 0/4] i2c: designware: add i2c gpio recovery option
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH 3/3] i2c: xlp9xx: Handle I2C_M_RECV_LEN in msg->flags
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH 2/3] i2c: xlp9xx: Get clock frequency with clk API
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/3] ACPI / APD: Add clock frequency for ThunderX2 I2C controller
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] dt-bindings: i2c: Update documentation for "mv78230-a0-i2c"
  • From: Gregory CLEMENT <gregory.clement@xxxxxxxxxxxxxxxxxx>