Linux Kernel I2C

• Thread Index

• Re: [PATCH v2 2/2] dt-bindings: i2c: Update documentation for "mv78230-a0-i2c"
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] i2c: piix4: Fix SMBus port selection for AMD Family 17h chips
  • From: Rudolf Marek <r.marek@xxxxxxxxxxxx>
• Re: [PATCH] i2c: piix4: Fix SMBus port selection for AMD Family 17h chips
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] i2c: piix4: Fix SMBus port selection for AMD Family 17h chips
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: piix4: Disable completely the IMC during SMBUS_BLOCK_DATA
  • From: Ricardo Ribalda Delgado <ricardo.ribalda@xxxxxxxxx>
• Re: [PATCH] i2c: piix4: Fix SMBus port selection for AMD Family 17h chips
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH] i2c: piix4: Disable completely the IMC during SMBUS_BLOCK_DATA
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH] i2c: ismt: Separate I2C block read from SMBus block read
  • From: Pontus Andersson <epontan@xxxxxxxxx>
• [PATCH] i2c: generic recovery: check SCL before SDA
  • From: Claudio Foellmi <claudio.foellmi@xxxxxxxx>
• Re: [PATCH] i2c: ismt: Separate I2C block read from SMBus block read
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v2] i2c: omap: Trigger bus recovery in lockup case
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCH] Fix Bug for cadence i2c interrupt overrunning buffer
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 2/3] i2c: Cocci spatch "of_table"
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: piix4: Disable completely the IMC during SMBUS_BLOCK_DATA
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: designware: Don't set SCL timings and speed mode when in slave mode
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: i801: Add support for Intel Cedar Fork
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v1] i2c:i2c-stm32f7: fix setup structure
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] dt-bindings: i2c: Update documentation for "mv78230-a0-i2c"
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH 7/7 v3] i2c: gpio: Add support for named gpios in DT
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 6/7 v3] dt-bindings: i2c: i2c-gpio: Add support for named gpios
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 5/7 v3] i2c: gpio: Local vars in probe
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 4/7 v3] i2c: gpio: Augment all boardfiles to use open drain
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 3/7 v3] i2c: gpio: Enforce open drain through gpiolib
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 2/7 v3] gpio: Make it possible for consumers to enforce open drain
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 1/7 v3] i2c: gpio: Convert to use descriptors
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 0/7 v3] I2C GPIO to use gpiolibs open drain
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v4 3/3] PM: i2c-designware-platdrv: Suspend/resume at the late/early stages
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v4 2/3] PM / mfd: intel-lpss: Push system sleep callbacks to late/early stages
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [Update][PATCH v5 1/3] PM: i2c-designware-platdrv: Clean up PM handling in probe
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: sh_mobile: Use of_device_get_match_data() helper
  • From: Simon Horman <horms@xxxxxxxxxxxx>
• Re: [PATCH v2] i2c: omap: Trigger bus recovery in lockup case
  • From: Vignesh R <vigneshr@xxxxxx>
• Re: [PATCH] dt-bindings: i2c: Add armada-38x i2c binding
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: i2c: Add armada-38x i2c binding
  • From: Gregory CLEMENT <gregory.clement@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: i2c: Add armada-38x i2c binding
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH] i2c: sh_mobile: Use of_device_get_match_data() helper
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• Re: [PATCH 1/7] i2c: gpio: Convert to use descriptors
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH] [media] ov5645: I2C address change
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v3 0/4] i2c: designware: add i2c gpio recovery option
  • From: Ferry Toth <ftoth@xxxxxxxxxx>
• [PATCH v2] i2c: omap: Trigger bus recovery in lockup case
  • From: Claudio Foellmi <claudio.foellmi@xxxxxxxx>
• Re: [PATCH] dt-bindings: i2c: Add armada-38x i2c binding
  • From: Gregory CLEMENT <gregory.clement@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: i2c: Add armada-38x i2c binding
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v6 3/3] eeprom: at24: enable runtime pm support
  • From: "sakari.ailus@xxxxxx" <sakari.ailus@xxxxxx>
• Re: [PATCH v6 3/3] eeprom: at24: enable runtime pm support
  • From: "sakari.ailus@xxxxxx" <sakari.ailus@xxxxxx>
• Re: [PATCH] i2c-omap: Trigger bus recovery in lockup case
  • From: Vignesh R <vigneshr@xxxxxx>
• Re: i2c-omap.c vs. qemu: too much work in one irq (and broken boot)
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH v4 2/3] PM / mfd: intel-lpss: Push system sleep callbacks to late/early stages
  • From: "Rafael J. Wysocki" <rafael@xxxxxxxxxx>
• Re: [PATCH] i2c-omap: Trigger bus recovery in lockup case
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCH 1/7] i2c: gpio: Convert to use descriptors
  • From: Ben Dooks <ben.dooks@xxxxxxxxxxxxxxx>
• [PATCH 0/4] Qualcomm Camera Control Interface driver
  • From: Todor Tomov <todor.tomov@xxxxxxxxxx>
• [PATCH 2/4] i2c: Add Qualcomm Camera Control Interface driver
  • From: Todor Tomov <todor.tomov@xxxxxxxxxx>
• [PATCH 4/4] arm64: dts: qcom: Add Camera Control Interface support
  • From: Todor Tomov <todor.tomov@xxxxxxxxxx>
• [PATCH 1/4] dt-bindings: media: Binding document for Qualcomm Camera Control Interface driver
  • From: Todor Tomov <todor.tomov@xxxxxxxxxx>
• [PATCH 3/4] MAINTAINERS: Add Qualcomm Camera Control Interface driver
  • From: Todor Tomov <todor.tomov@xxxxxxxxxx>
• Re: [PATCH v2 2/2] dt-bindings: i2c: Update documentation for "mv78230-a0-i2c"
  • From: Gregory CLEMENT <gregory.clement@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/2] ARM: dts: Fix I2C repeated start issue on Armada-38x
  • From: Gregory CLEMENT <gregory.clement@xxxxxxxxxxxxxxxxxx>
• [PATCH] i2c: ismt: Separate I2C block read from SMBus block read
  • From: Pontus Andersson <epontan@xxxxxxxxx>
• [PATCH] i2c: img-scb: Add runtime PM
  • From: Ed Blake <ed.blake@xxxxxxxxxxx>
• Re: i2c-omap.c vs. qemu: too much work in one irq (and broken boot)
  • From: Pali Rohár <pali.rohar@xxxxxxxxx>
• Re: [PATCH 1/7] i2c: gpio: Convert to use descriptors
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: i2c-omap.c vs. qemu: too much work in one irq (and broken boot)
  • From: Pavel Machek <pavel@xxxxxx>
• i2c-omap.c vs. qemu: too much work in one irq (and broken boot)
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH v5 2/2] add w1_ds28e17 driver for the DS28E17 Onewire to I2C master bridge
  • From: Jan Kandziora <jjj@xxxxxx>
• [PATCH v6] eeprom: at24: Add OF device ID table
  • From: Javier Martinez Canillas <javierm@xxxxxxxxxx>
• Re: [PATCH v5 2/2] add w1_ds28e17 driver for the DS28E17 Onewire to I2C master bridge
  • From: Evgeniy Polyakov <zbr@xxxxxxxxxxx>
• [PATCH v2] i2c: riic: remove fixed clock restriction
  • From: Chris Brandt <chris.brandt@xxxxxxxxxxx>
• RE: [PATCH] i2c: riic: remove fixed clock restriction
  • From: Chris Brandt <Chris.Brandt@xxxxxxxxxxx>
• Re: [PATCH] i2c-omap: Trigger bus recovery in lockup case
  • From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: riic: remove fixed clock restriction
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• [PATCH] i2c: riic: remove fixed clock restriction
  • From: Chris Brandt <chris.brandt@xxxxxxxxxxx>
• Re: [PATCH] i2c-omap: Trigger bus recovery in lockup case
  • From: Claudio Foellmi <claudio.foellmi@xxxxxxxx>
• Re: [PATCH] i2c-omap: Trigger bus recovery in lockup case
  • From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 1/4] i2c: Switch to using gpiod interface for gpio bus recovery
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 4/4] i2c: designware: add i2c gpio recovery option
  • From: Phil Reid <preid@xxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 1/4] i2c: Switch to using gpiod interface for gpio bus recovery
  • From: Phil Reid <preid@xxxxxxxxxxxxxxxxx>
• Re: i2c-ismt timeout
  • From: Daniel Versick <danls@xxxxxxxxxx>
• [PATCH v2 0/2] Fix I2C repeated start timing violation on Armada-38x.
  • From: Kalyan Kinthada <kalyan.kinthada@xxxxxxxxxxxxxxxxxxx>
• [PATCH v2 2/2] dt-bindings: i2c: Update documentation for "mv78230-a0-i2c"
  • From: Kalyan Kinthada <kalyan.kinthada@xxxxxxxxxxxxxxxxxxx>
• [PATCH v2 1/2] ARM: dts: Fix I2C repeated start issue on Armada-38x
  • From: Kalyan Kinthada <kalyan.kinthada@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v4 2/3] PM / mfd: intel-lpss: Push system sleep callbacks to late/early stages
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• Re: [PATCH v4 2/3] PM / mfd: intel-lpss: Push system sleep callbacks to late/early stages
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v3 4/4] i2c: designware: add i2c gpio recovery option
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 3/4] i2c: designware: rename i2c_dw_plat_prepare_clk to i2c_dw_prepare_clk
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 2/4] i2c: designware: move i2c_dw_plat_prepare_clk to common
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Re: i2c-ismt timeout
  • From: Neil Horman <nhorman@xxxxxxxxxxxxx>
• Re: [PATCH v3 4/4] i2c: designware: add i2c gpio recovery option
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 1/4] i2c: Switch to using gpiod interface for gpio bus recovery
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 0/4] i2c: designware: add i2c gpio recovery option
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 1/4] i2c: Switch to using gpiod interface for gpio bus recovery
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 1/4] i2c: Switch to using gpiod interface for gpio bus recovery
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 0/4] i2c: designware: add i2c gpio recovery option
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH 3/3] i2c: xlp9xx: Handle I2C_M_RECV_LEN in msg->flags
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH 2/3] i2c: xlp9xx: Get clock frequency with clk API
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/3] ACPI / APD: Add clock frequency for ThunderX2 I2C controller
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] dt-bindings: i2c: Update documentation for "mv78230-a0-i2c"
  • From: Gregory CLEMENT <gregory.clement@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v11 00/10] Add sbs-manager with smbalert support
  • From: Phil Reid <preid@xxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 0/4] i2c: designware: add i2c gpio recovery option
  • From: Phil Reid <preid@xxxxxxxxxxxxxxxxx>
• [PATCH 1/2] ARM: dts: Fix I2C repeated start issue on Armada-38x
  • From: Kalyan Kinthada <kalyan.kinthada@xxxxxxxxxxxxxxxxxxx>
• [PATCH 0/2] Fix I2C repeated start timing violation on Armada-38x.
  • From: Kalyan Kinthada <kalyan.kinthada@xxxxxxxxxxxxxxxxxxx>
• [PATCH 2/2] dt-bindings: i2c: Update documentation for "mv78230-a0-i2c"
  • From: Kalyan Kinthada <kalyan.kinthada@xxxxxxxxxxxxxxxxxxx>
• [PATCH 3/3] i2c: xlp9xx: Handle I2C_M_RECV_LEN in msg->flags
  • From: Kamlakant Patel <kamlakant.patel@xxxxxxxxxx>
• [PATCH 2/3] i2c: xlp9xx: Get clock frequency with clk API
  • From: Kamlakant Patel <kamlakant.patel@xxxxxxxxxx>
• [PATCH 1/3] ACPI / APD: Add clock frequency for ThunderX2 I2C controller
  • From: Kamlakant Patel <kamlakant.patel@xxxxxxxxxx>
• [PATCH 0/3] i2c-xlp9xx: update i2c driver to handle I2C_M_RECV_LEN flag
  • From: Kamlakant Patel <kamlakant.patel@xxxxxxxxxx>
• Re: i2c-ismt timeout
  • From: Neil Horman <nhorman@xxxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: i2c: Add armada-38x i2c binding
  • From: Gregory CLEMENT <gregory.clement@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: i2c: Add armada-38x i2c binding
  • From: Chris Packham <Chris.Packham@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: i2c: Add armada-38x i2c binding
  • From: Kalyan Kinthada <Kalyan.Kinthada@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] i2c-omap: Trigger bus recovery in lockup case
  • From: Claudio Foellmi <claudio.foellmi@xxxxxxxx>
• Re: [PATCH] dt-bindings: i2c: Add armada-38x i2c binding
  • From: Gregory CLEMENT <gregory.clement@xxxxxxxxxxxxxxxxxx>
• Re: possible clarifications/suggestions for I2C man pages
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH v6 3/3] eeprom: at24: enable runtime pm support
  • From: Tomasz Figa <tfiga@xxxxxxxxxxxx>
• RE: [PATCH v6 3/3] eeprom: at24: enable runtime pm support
  • From: "Mohandass, Divagar" <divagar.mohandass@xxxxxxxxx>
• RE: [PATCH v6 2/3] eeprom: at24: add support to fetch eeprom device property "size"
  • From: "Mohandass, Divagar" <divagar.mohandass@xxxxxxxxx>
• i2c-ismt timeout
  • From: Daniel Versick <danls@xxxxxxxxxx>
• [Update][PATCH v5 1/3] PM: i2c-designware-platdrv: Clean up PM handling in probe
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• Re: [PATCH v4 1/3] PM: i2c-designware-platdrv: Clean up PM handling in probe
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• Re: [PATCH v4 1/3] PM: i2c-designware-platdrv: Clean up PM handling in probe
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH] [trivial] dt-bindings: i2c: i2c-mux: Spelling s/required is/required if/
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH] [trivial] dt-bindings: i2c: i2c-mux: Spelling s/required is/required if/
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH] [trivial] dt-bindings: i2c: i2c-mux: Spelling s/required is/required if/
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH v4 2/3] PM / mfd: intel-lpss: Push system sleep callbacks to late/early stages
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v4 2/3] PM / mfd: intel-lpss: Push system sleep callbacks to late/early stages
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• Re: [PATCH v4 2/3] PM / mfd: intel-lpss: Push system sleep callbacks to late/early stages
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH v4 0/3] i2c: designware: Runtime PM aware system sleep handling
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• [PATCH v4 1/3] PM: i2c-designware-platdrv: Clean up PM handling in probe
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• [PATCH v4 3/3] PM: i2c-designware-platdrv: Suspend/resume at the late/early stages
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• [PATCH v4 2/3] PM / mfd: intel-lpss: Push system sleep callbacks to late/early stages
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: i2c: Add armada-38x i2c binding
  • From: Kalyan Kinthada <Kalyan.Kinthada@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] i2c: designware: switch to suspend_late/resume_early
  • From: Rajat Jain <rajatxjain@xxxxxxxxx>
• Re: [PATCH 1/2] i2c: designware: switch to suspend_late/resume_early
  • From: Rajat Jain <rajatxjain@xxxxxxxxx>
• Re: [PATCH 1/2] i2c: designware: switch to suspend_late/resume_early
  • From: "Rafael J. Wysocki" <rafael@xxxxxxxxxx>
• Re: [PATCH] i2c: piix4: Fix SMBus port selection for AMD Family 17h chips
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v6 2/3] eeprom: at24: add support to fetch eeprom device property "size"
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH] dt-bindings: i2c: Add armada-38x i2c binding
  • From: Gregory CLEMENT <gregory.clement@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: designware: make const array supported_speeds static to shink object code size
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• [PATCH] dt-bindings: i2c: Add armada-38x i2c binding
  • From: Kalyan Kinthada <kalyan.kinthada@xxxxxxxxxxxxxxxxxxx>
• [PATCH] i2c: designware: make const array supported_speeds static to shink object code size
  • From: Colin King <colin.king@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: i801: Add support for Intel Cedar Fork
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH 2/2] mfd: intel-lpss: switch to suspend_late()/resume_early()
  • From: "Rafael J. Wysocki" <rafael@xxxxxxxxxx>
• Re: [PATCH 2/2] mfd: intel-lpss: switch to suspend_late()/resume_early()
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [RFC PATCH v5 2/6] i2c: add helpers to ease DMA handling
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [RFC PATCH v5 6/6] i2c: dev: mark RDWR buffers as DMA_SAFE
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 1/2] i2c: designware: switch to suspend_late/resume_early
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• Re: [PATCH 2/2] mfd: intel-lpss: switch to suspend_late()/resume_early()
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• Re: [RFC PATCH v5 6/6] i2c: dev: mark RDWR buffers as DMA_SAFE
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [RFC PATCH v5 2/6] i2c: add helpers to ease DMA handling
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [RFC PATCH v5 3/6] i2c: add docs to clarify DMA handling
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [RFC PATCH v5 2/6] i2c: add helpers to ease DMA handling
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [RFC PATCH v5 2/6] i2c: add helpers to ease DMA handling
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• [PATCH v1] i2c:i2c-stm32f7: fix setup structure
  • From: Pierre-Yves MORDRET <pierre-yves.mordret@xxxxxx>
• [PATCH] i2c: i801: Add support for Intel Cedar Fork
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• [PATCH] [trivial] dt-bindings: i2c: i2c-mux: Spelling s/required is/required if/
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• Re: [PATCH 2/2] mfd: intel-lpss: switch to suspend_late()/resume_early()
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH] i2c: piix4: Disable completely the IMC during SMBUS_BLOCK_DATA
  • From: Ricardo Ribalda Delgado <ricardo.ribalda@xxxxxxxxx>
• [PATCH 2/3] i2c: Cocci spatch "of_table"
  • From: Thomas Meyer <thomas@xxxxxxxx>
• Re: [PATCH 2/2] mfd: intel-lpss: switch to suspend_late()/resume_early()
  • From: Rajat Jain <rajatja@xxxxxxxxxx>
• Re: [PATCH 1/2] i2c: designware: switch to suspend_late/resume_early
  • From: Rajat Jain <rajatja@xxxxxxxxxx>
• Re: [PATCH 2/2] mfd: intel-lpss: switch to suspend_late()/resume_early()
  • From: "Rafael J. Wysocki" <rafael@xxxxxxxxxx>
• Re: [PATCH 1/2] i2c: designware: switch to suspend_late/resume_early
  • From: "Rafael J. Wysocki" <rafael@xxxxxxxxxx>
• Re: [PATCH 1/2] i2c: designware: switch to suspend_late/resume_early
  • From: Rajat Jain <rajatxjain@xxxxxxxxx>
• [PATCH 1/2] i2c: designware: switch to suspend_late/resume_early
  • From: Rajat Jain <rajatja@xxxxxxxxxx>
• [PATCH 2/2] mfd: intel-lpss: switch to suspend_late()/resume_early()
  • From: Rajat Jain <rajatja@xxxxxxxxxx>
• Re: [PATCH v4 1/2] wire: export w1_touch_bit
  • From: Jan Kandziora <jjj@xxxxxx>
• [PATCH v5 2/2] add w1_ds28e17 driver for the DS28E17 Onewire to I2C master bridge
  • From: Jan Kandziora <jjj@xxxxxx>
• [PATCH v5 1/2] wire: export w1_touch_bit
  • From: Jan Kandziora <jjj@xxxxxx>
• Re: [PATCH 6/7] dt-bindings: i2c: i2c-gpio: Add support for named gpios
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [RFC PATCH v5 3/6] i2c: add docs to clarify DMA handling
  • From: Mauro Carvalho Chehab <mchehab@xxxxxxxxxxxxxxxx>
• [RFC PATCH v5 2/6] i2c: add helpers to ease DMA handling
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• [RFC PATCH v5 0/6] i2c: document DMA handling and add helpers for it
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• [RFC PATCH v5 3/6] i2c: add docs to clarify DMA handling
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• [RFC PATCH v5 4/6] i2c: sh_mobile: use helper to decide if DMA is useful
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• [RFC PATCH v5 1/6] i2c: add a message flag for DMA safe buffers
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• [RFC PATCH v5 5/6] i2c: rcar: skip DMA if buffer is not safe
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• [RFC PATCH v5 6/6] i2c: dev: mark RDWR buffers as DMA_SAFE
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [RFC PATCH v4 3/6] i2c: add docs to clarify DMA handling
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [RFC PATCH v4 3/6] i2c: add docs to clarify DMA handling
  • From: Mauro Carvalho Chehab <mchehab@xxxxxxxxxxxxxxxx>
• Re: [RFC PATCH v4 3/6] i2c: add docs to clarify DMA handling
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c-omap: Trigger bus recovery in lockup case
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• Re: [PATCH v6 3/3] eeprom: at24: enable runtime pm support
  • From: "sakari.ailus@xxxxxx" <sakari.ailus@xxxxxx>
• Re: [PATCH] i2c-omap: Trigger bus recovery in lockup case
  • From: Claudio Foellmi <claudio.foellmi@xxxxxxxx>
• Re: [PATCH v6 3/3] eeprom: at24: enable runtime pm support
  • From: Tomasz Figa <tfiga@xxxxxxxxxxxx>
• Re: [PATCH v6 3/3] eeprom: at24: enable runtime pm support
  • From: "sakari.ailus@xxxxxx" <sakari.ailus@xxxxxx>
• Re: [PATCH v6 3/3] eeprom: at24: enable runtime pm support
  • From: Tomasz Figa <tfiga@xxxxxxxxxxxx>
• RE: [PATCH v6 3/3] eeprom: at24: enable runtime pm support
  • From: "Mani, Rajmohan" <rajmohan.mani@xxxxxxxxx>
• RE: [PATCH v6 2/3] eeprom: at24: add support to fetch eeprom device property "size"
  • From: "Mani, Rajmohan" <rajmohan.mani@xxxxxxxxx>
• RE: [PATCH v6 1/3] dt-bindings: add eeprom "size" property
  • From: "Mani, Rajmohan" <rajmohan.mani@xxxxxxxxx>
• RE: [PATCH v6 0/3] enable eeprom "size" property and runtime pm
  • From: "Mani, Rajmohan" <rajmohan.mani@xxxxxxxxx>
• Re: Understanding suspend() vs suspend_late() for I2c devices
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• Re: [PATCH/RFC 1/3] dt-bindings: i2c: i2c-gpio: Add support for named gpios
  • From: Rob Herring <robh@xxxxxxxxxx>
• Understanding suspend() vs suspend_late() for I2c devices
  • From: Rajat Jain <rajatja@xxxxxxxxxx>
• Re: [PATCH] i2c-omap: Trigger bus recovery in lockup case
  • From: Vignesh R <vigneshr@xxxxxx>
• Re: [PATCH 1/7] i2c: gpio: Convert to use descriptors
  • From: Ben Dooks <ben.dooks@xxxxxxxxxxxxxxx>
• Re: [[RESEND]PATCHv6 2/2] i2c: altera: Add Altera I2C Controller driver
  • From: Thor Thayer <thor.thayer@xxxxxxxxxxxxxxx>
• Re: [PATCH/RFC 1/3] dt-bindings: i2c: i2c-gpio: Add support for named gpios
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v4 1/2] wire: export w1_touch_bit
  • From: GregKH <greg@xxxxxxxxx>
• Re: [PATCH v4 1/2] wire: export w1_touch_bit
  • From: Jan Kandziora <jjj@xxxxxx>
• Re: [PATCH 7/7] i2c: gpio: Add support for named gpios in DT
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 1/7] i2c: gpio: Convert to use descriptors
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH/RFC 1/3] dt-bindings: i2c: i2c-gpio: Add support for named gpios
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v4 0/2] i2c: davinci: Add PM Runtime Support needed by 66AK2G
  • From: Sekhar Nori <nsekhar@xxxxxx>
• Re: [PATCH v4 1/2] wire: export w1_touch_bit
  • From: GregKH <greg@xxxxxxxxx>
• Re: [PATCH 1/5] i2c: gpio: Convert to use descriptors
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v4 2/2] add w1_ds28e17 driver for the DS28E17 Onewire to I2C master bridge
  • From: Jan Kandziora <jjj@xxxxxx>
• [PATCH v4 2/2] add w1_ds28e17 driver for the DS28E17 Onewire to I2C master bridge
  • From: Jan Kandziora <jjj@xxxxxx>
• [PATCH v4 1/2] wire: export w1_touch_bit
  • From: Jan Kandziora <jjj@xxxxxx>
• Re: [PATCH] i2c-omap: Trigger bus recovery in lockup case
  • From: Claudio Foellmi <claudio.foellmi@xxxxxxxx>
• Re: [PATCH 0/7] I2C GPIO to use gpiolibs open drain
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v4 2/2] add w1_ds28e17 driver for the DS28E17 Onewire to I2C master bridge
  • From: GregKH <greg@xxxxxxxxx>
• Re: [PATCH 7/7] i2c: gpio: Add support for named gpios in DT
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH 5/7] i2c: gpio: Local vars in probe
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH 7/7] i2c: gpio: Add support for named gpios in DT
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH][V2] i2c: i2c-stm32f7: make structure stm32f7_setup static const
  • From: Pierre Yves MORDRET <pierre-yves.mordret@xxxxxx>
• Re: [PATCH 1/7] i2c: gpio: Convert to use descriptors
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH][V2] i2c: i2c-stm32f7: make structure stm32f7_setup static const
  • From: Colin King <colin.king@xxxxxxxxxxxxx>
• Re: [PATCH] i2c-omap: Trigger bus recovery in lockup case
  • From: Vignesh R <vigneshr@xxxxxx>
• Re: [PATCH 1/5] i2c: gpio: Convert to use descriptors
  • From: Heiko Schocher <hs@xxxxxxx>
• [PATCH 7/7] i2c: gpio: Add support for named gpios in DT
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 6/7] dt-bindings: i2c: i2c-gpio: Add support for named gpios
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 5/7] i2c: gpio: Local vars in probe
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 4/7] i2c: gpio: Augment all boardfiles to use open drain
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 3/7] i2c: gpio: Enforce open drain through gpiolib
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 2/7] gpio: Make it possible for consumers to enforce open drain
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 1/7] i2c: gpio: Convert to use descriptors
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 0/7] I2C GPIO to use gpiolibs open drain
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 1/5] i2c: gpio: Convert to use descriptors
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 1/5] i2c: gpio: Convert to use descriptors
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH] i2c: i2c-stm32f7: make structure stm32f7_setup static
  • From: Joe Perches <joe@xxxxxxxxxxx>
• [PATCH] i2c: i2c-stm32f7: make structure stm32f7_setup static
  • From: Colin King <colin.king@xxxxxxxxxxxxx>
• Re: [I2C] About warning 'DMA-API: device driver maps memory from stack'
  • From: Jun Gao <jun.gao@xxxxxxxxxxxx>
• [PATCH] Fix Bug for cadence i2c interrupt overrunning buffer
  • From: Andrew Worsley <amworsley@xxxxxxxxx>
• Re: [PATCH] i2c-omap: Trigger bus recovery in lockup case
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• Re: [PATCH 1/5] i2c: gpio: Convert to use descriptors
  • From: Olof Johansson <olof@xxxxxxxxx>
• Re: [PATCH 1/5] i2c: gpio: Convert to use descriptors
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 1/5] i2c: gpio: Convert to use descriptors
  • From: Olof Johansson <olof@xxxxxxxxx>
• [PULL REQUEST] i2c for 4.14
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v4 3/5] i2c: i2c-stm32f7: add driver
  • From: Pierre Yves MORDRET <pierre-yves.mordret@xxxxxx>
• [PATCH] i2c-omap: Trigger bus recovery in lockup case
  • From: Claudio Foellmi <claudio.foellmi@xxxxxxxx>
• Re: [PATCH v4 3/5] i2c: i2c-stm32f7: add driver
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v4 2/5] i2c: i2c-stm32f4: use generic definition of speed enum
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v4 1/5] dt-bindings: i2c-stm32: Document the STM32F7 I2C bindings
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH v4 1/5] dt-bindings: i2c-stm32: Document the STM32F7 I2C bindings
  • From: Pierre-Yves MORDRET <pierre-yves.mordret@xxxxxx>
• [PATCH v4 4/5] ARM: dts: stm32: Add I2C1 support for STM32F746 SoC
  • From: Pierre-Yves MORDRET <pierre-yves.mordret@xxxxxx>
• [PATCH v4 5/5] ARM: dts: stm32: Add I2C1 support for STM32F746 eval board
  • From: Pierre-Yves MORDRET <pierre-yves.mordret@xxxxxx>
• [PATCH v4 2/5] i2c: i2c-stm32f4: use generic definition of speed enum
  • From: Pierre-Yves MORDRET <pierre-yves.mordret@xxxxxx>
• [PATCH v4 3/5] i2c: i2c-stm32f7: add driver
  • From: Pierre-Yves MORDRET <pierre-yves.mordret@xxxxxx>
• [PATCH v4 0/5] Add support for the STM32F7 I2C
  • From: Pierre-Yves MORDRET <pierre-yves.mordret@xxxxxx>
• Re: [PATCH 1/5] i2c: gpio: Convert to use descriptors
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 4/5] i2c: gpio: Augment all boardfiles to use open drain
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [RESEND PATCH v3 3/5] i2c: i2c-stm32f7: add driver
  • From: Pierre Yves MORDRET <pierre-yves.mordret@xxxxxx>
• Re: [[RESEND]PATCHv6 2/2] i2c: altera: Add Altera I2C Controller driver
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [RESEND PATCH v3 3/5] i2c: i2c-stm32f7: add driver
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH/RFC 2/3] i2c: gpio: Add support for named gpios in DT
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 1/5] i2c: gpio: Convert to use descriptors
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH/RFC 2/3] i2c: gpio: Add support for named gpios in DT
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [[RESEND]PATCHv6 1/2] dt-bindings: i2c: Add Altera I2C Controller
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [[RESEND]PATCHv6 2/2] i2c: altera: Add Altera I2C Controller driver
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [1/9] i2c: designware: Fix system suspend
  • From: "Wangtao (Kevin, Kirin)" <kevin.wangtao@xxxxxxxxxxxxx>
• Re: [PATCH v4 1/2] i2c: davinci: Add PM Runtime Support
  • From: Sekhar Nori <nsekhar@xxxxxx>
• Re: [PATCH v4 1/2] i2c: davinci: Add PM Runtime Support
  • From: Baolin Wang <baolin.wang@xxxxxxxxxx>
• Re: [PATCH v4 1/2] i2c: davinci: Add PM Runtime Support
  • From: Sekhar Nori <nsekhar@xxxxxx>
• Re: [PATCH v3 1/2] i2c: davinci: Add PM Runtime Support
  • From: Sekhar Nori <nsekhar@xxxxxx>
• Re: [PATCH v4 1/2] i2c: davinci: Add PM Runtime Support
  • From: Baolin Wang <baolin.wang@xxxxxxxxxx>
• [[RESEND]PATCHv6 2/2] i2c: altera: Add Altera I2C Controller driver
  • From: thor.thayer@xxxxxxxxxxxxxxx
• [[RESEND]PATCHv6 1/2] dt-bindings: i2c: Add Altera I2C Controller
  • From: thor.thayer@xxxxxxxxxxxxxxx
• Re: [PATCH 1/5] i2c: gpio: Convert to use descriptors
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH v4 1/2] i2c: davinci: Add PM Runtime Support
  • From: Franklin S Cooper Jr <fcooper@xxxxxx>
• Re: [PATCH v3 1/2] i2c: davinci: Add PM Runtime Support
  • From: Grygorii Strashko <grygorii.strashko@xxxxxx>
• [PATCH v4 2/2] dt-bindings: i2c: i2c-davinci: Update binding for 66AK2Gx pwr dm property
  • From: Franklin S Cooper Jr <fcooper@xxxxxx>
• [PATCH v4 0/2] i2c: davinci: Add PM Runtime Support needed by 66AK2G
  • From: Franklin S Cooper Jr <fcooper@xxxxxx>
• Re: [PATCH v3 1/2] i2c: davinci: Add PM Runtime Support
  • From: Franklin S Cooper Jr <fcooper@xxxxxx>
• Re: [PATCH 1/5] i2c: gpio: Convert to use descriptors
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [RESEND PATCH v3 0/5] Add support for the STM32F7 I2C
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxx>
• Re: [PATCH v3 1/2] i2c: davinci: Add PM Runtime Support
  • From: Sekhar Nori <nsekhar@xxxxxx>
• Re: [PATCH 1/5] i2c: gpio: Convert to use descriptors
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v2] i2c: imx: allow i2c devices share an interrupt
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH v2] i2c: imx: allow i2c devices share an interrupt
  • From: <ying.zhang22455@xxxxxxx>
• [PATCH 5/5] i2c: gpio: Local vars in probe
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 4/5] i2c: gpio: Augment all boardfiles to use open drain
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 3/5] i2c: gpio: Enforce open drain through gpiolib
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 2/5] gpio: Make it possible for consumers to enforce open drain
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 1/5] i2c: gpio: Convert to use descriptors
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 0/5] I2C GPIO to use gpiolibs open drain
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [RFC PATCH v4 3/6] i2c: add docs to clarify DMA handling
  • From: Mauro Carvalho Chehab <mchehab@xxxxxxxxxxxxxxxx>
• Re: [RFC PATCH v4 3/6] i2c: add docs to clarify DMA handling
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PULL REQUEST] i2c for 4.14
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH v3 1/2] i2c: davinci: Add PM Runtime Support
  • From: Franklin S Cooper Jr <fcooper@xxxxxx>
• [PATCH v3 0/2] ARM: dts: keystone-k2g: Add I2C support for 66AK2G
  • From: Franklin S Cooper Jr <fcooper@xxxxxx>
• [PATCH v3 2/2] dt-bindings: i2c: i2c-davinci: Update binding for 66AK2Gx pwr dm property
  • From: Franklin S Cooper Jr <fcooper@xxxxxx>
• RE: Outlook Web app for Staff
  • From: Sam Rasheed-Hiscoke <Sam.Rasheed-Hiscoke@xxxxxxxxxx>
• Re: [RFC PATCH v4 3/6] i2c: add docs to clarify DMA handling
  • From: Mauro Carvalho Chehab <mchehab@xxxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] i2c: designware: Remove needless pm_runtime_put_noidle() call
  • From: Luis Oliveira <Luis.Oliveira@xxxxxxxxxxxx>
• Re: [RFC PATCH v4 3/6] i2c: add docs to clarify DMA handling
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [1/9] i2c: designware: Fix system suspend
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [RFT][PATCH v3 0/3] i2c: designware: Runtime PM aware system sleep handling
  • From: Johannes Stezenbach <js@xxxxxxxxx>
• Re: [1/9] i2c: designware: Fix system suspend
  • From: "Wangtao (Kevin, Kirin)" <kevin.wangtao@xxxxxxxxxxxxx>
• Re: [REF] Query regarding process call/repeated start in i2c driver
  • From: Shivaraj Shetty <shettyshivaraj@xxxxxxxxx>
• Re: [PATCH/RFC 1/3] dt-bindings: i2c: i2c-gpio: Add support for named gpios
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v3 0/8] PM / ACPI / i2c: Deploy runtime PM centric path for system sleep
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• Re: [RFT][PATCH v3 0/3] i2c: designware: Runtime PM aware system sleep handling
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• Re: [RFT][PATCH v3 0/3] i2c: designware: Runtime PM aware system sleep handling
  • From: Johannes Stezenbach <js@xxxxxxxxx>
• Re: [PATCHv6 2/2] i2c: altera: Add Altera I2C Controller driver
  • From: Thor Thayer <thor.thayer@xxxxxxxxxxxxxxx>
• Re: [RFT][PATCH v3 0/3] i2c: designware: Runtime PM aware system sleep handling
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 0/8] PM / ACPI / i2c: Deploy runtime PM centric path for system sleep
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH v3 0/8] PM / ACPI / i2c: Deploy runtime PM centric path for system sleep
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [RFT][PATCH v3 0/3] i2c: designware: Runtime PM aware system sleep handling
  • From: "Rafael J. Wysocki" <rafael@xxxxxxxxxx>
• Re: [RFT][PATCH v3 0/3] i2c: designware: Runtime PM aware system sleep handling
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 0/8] PM / ACPI / i2c: Deploy runtime PM centric path for system sleep
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• Re: [RFT][PATCH v3 0/3] i2c: designware: Runtime PM aware system sleep handling
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• Re: [RFT][PATCH v3 0/3] i2c: designware: Runtime PM aware system sleep handling
  • From: Johannes Stezenbach <js@xxxxxxxxx>
• Re: [PATCH v3 0/8] PM / ACPI / i2c: Deploy runtime PM centric path for system sleep
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• Re: [PATCH v3 6/8] PM / ACPI: Enable the runtime PM centric approach for system sleep
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• [RFT][PATCH v3 1/3] i2c: designware: Clean up PM handling in dw_i2c_plat_probe()
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• [RFT][PATCH v3 0/3] i2c: designware: Runtime PM aware system sleep handling
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• [RFT][PATCH v3 2/3] PM / mfd: intel-lpss: Push system sleep callbacks to late/early stages
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• [RFT][PATCH v3 3/3] PM / i2c: designware: Clean up system sleep handling
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• Re: [RFT][PATCH v2 2/2] PM / i2c: designware: Clean up system sleep handling without ACPI
  • From: "Rafael J. Wysocki" <rafael@xxxxxxxxxx>
• Re: [RFT][PATCH v2 2/2] PM / i2c: designware: Clean up system sleep handling without ACPI
  • From: Johannes Stezenbach <js@xxxxxxxxx>
• Re: [REF] Query regarding process call/repeated start in i2c driver
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [RFT][PATCH 2/2] PM / i2c: designware: Clean up system sleep handling without ACPI
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [RFT][PATCH v2 2/2] PM / i2c: designware: Clean up system sleep handling without ACPI
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [RFT][PATCH v2 2/2] PM / i2c: designware: Clean up system sleep handling without ACPI
  • From: "Rafael J. Wysocki" <rafael@xxxxxxxxxx>
• Re: [RFT][PATCH v2 2/2] PM / i2c: designware: Clean up system sleep handling without ACPI
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [RFT][PATCH v2 2/2] PM / i2c: designware: Clean up system sleep handling without ACPI
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• Re: [RFT][PATCH v2 2/2] PM / i2c: designware: Clean up system sleep handling without ACPI
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• Re: [RFT][PATCH v2 2/2] PM / i2c: designware: Clean up system sleep handling without ACPI
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [RFT][PATCH v2 2/2] PM / i2c: designware: Clean up system sleep handling without ACPI
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• Re: [RFT][PATCH v2 2/2] PM / i2c: designware: Clean up system sleep handling without ACPI
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [RFT][PATCH v2 2/2] PM / i2c: designware: Clean up system sleep handling without ACPI
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• Re: [RFT][PATCH 1/2] i2c: designware: Clean up PM handling in dw_i2c_plat_probe()
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• Re: [RFT][PATCH v2 2/2] PM / i2c: designware: Clean up system sleep handling without ACPI
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [RFT][PATCH 1/2] i2c: designware: Clean up PM handling in dw_i2c_plat_probe()
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH v6 0/3] enable eeprom "size" property and runtime pm
  • From: Sakari Ailus <sakari.ailus@xxxxxx>
• Re: [PATCH v4 2/2] add w1_ds28e17 driver for the DS28E17 Onewire to I2C master bridge
  • From: Evgeniy Polyakov <zbr@xxxxxxxxxxx>
• [REF] Query regarding process call/repeated start in i2c driver
  • From: Shivaraj Shetty <shettyshivaraj@xxxxxxxxx>
• Re: [PATCH v4 0/3] i2c: Hookup typec power-negotation to the PMIC and charger
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH v5 1/3] i2c: Allow overriding dev_name through board_info
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v5 2/3] i2c-cht-wc: Add device-properties for fusb302 integration
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v5 3/3] platform/x86: intel_cht_int33fe: Update fusb302 type string, add properties
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v5 0/3] i2c: Hookup typec power-negotation to the PMIC and charger
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [GIT PULL] Immutable branch between MFD and many other subsystems due for the v4.14 merge window
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH v4 3/3] platform/x86: intel_cht_int33fe: Update fusb302 type string, add properties
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v4 0/3] i2c: Hookup typec power-negotation to the PMIC and charger
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v3 6/8] PM / ACPI: Enable the runtime PM centric approach for system sleep
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH v3 0/8] PM / ACPI / i2c: Deploy runtime PM centric path for system sleep
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• RE: [PATCH 1/3] dt-bindings: add "size" property.
  • From: "Mohandass, Divagar" <divagar.mohandass@xxxxxxxxx>
• [PATCH v6 3/3] eeprom: at24: enable runtime pm support
  • From: Divagar Mohandass <divagar.mohandass@xxxxxxxxx>
• [PATCH v6 2/3] eeprom: at24: add support to fetch eeprom device property "size"
  • From: Divagar Mohandass <divagar.mohandass@xxxxxxxxx>
• [PATCH v6 1/3] dt-bindings: add eeprom "size" property
  • From: Divagar Mohandass <divagar.mohandass@xxxxxxxxx>
• [PATCH v6 0/3] enable eeprom "size" property and runtime pm
  • From: Divagar Mohandass <divagar.mohandass@xxxxxxxxx>
• RE: [PATCH v5 3/3] eeprom: at24: enable runtime pm support
  • From: "Mohandass, Divagar" <divagar.mohandass@xxxxxxxxx>
• Re: [RFT][PATCH 2/2] PM / i2c: designware: Clean up system sleep handling without ACPI
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• Re: [PATCH v3 0/8] PM / ACPI / i2c: Deploy runtime PM centric path for system sleep
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• [RFT][PATCH v2 2/2] PM / i2c: designware: Clean up system sleep handling without ACPI
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: add "size" property.
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v5 3/3] eeprom: at24: enable runtime pm support
  • From: Sakari Ailus <sakari.ailus@xxxxxx>
• [PATCH v5 0/3] enable eeprom "size" property and runtime pm
  • From: Divagar Mohandass <divagar.mohandass@xxxxxxxxx>
• [PATCH v5 1/3] dt-bindings: add eeprom "size" property
  • From: Divagar Mohandass <divagar.mohandass@xxxxxxxxx>
• [PATCH v5 2/3] eeprom: at24: add support to fetch eeprom device property "size"
  • From: Divagar Mohandass <divagar.mohandass@xxxxxxxxx>
• [PATCH v5 3/3] eeprom: at24: enable runtime pm support
  • From: Divagar Mohandass <divagar.mohandass@xxxxxxxxx>
• Re: [PATCH v4 3/3] platform/x86: intel_cht_int33fe: Update fusb302 type string, add properties
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v3 0/8] PM / ACPI / i2c: Deploy runtime PM centric path for system sleep
  • From: Lukas Wunner <lukas@xxxxxxxxx>
• Re: [RFT][PATCH v2 0/3] PM / ACPI / i2c: Runtime PM aware system sleep handling
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v4 0/3] i2c: Hookup typec power-negotation to the PMIC and charger
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v3 0/8] PM / ACPI / i2c: Deploy runtime PM centric path for system sleep
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• [RFT][PATCH 1/2] i2c: designware: Clean up PM handling in dw_i2c_plat_probe()
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• [RFT][PATCH 0/2] i2c: designware: Runtime PM aware system sleep handling
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• [RFT][PATCH 2/2] PM / i2c: designware: Clean up system sleep handling without ACPI
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• Re: [RFT][PATCH v2 0/3] PM / ACPI / i2c: Runtime PM aware system sleep handling
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• [PATCH v4 1/3] i2c: Allow overriding dev_name through board_info
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v4 2/3] i2c-cht-wc: Add device-properties for fusb302 integration
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v4 3/3] platform/x86: intel_cht_int33fe: Update fusb302 type string, add properties
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v4 0/3] i2c: Hookup typec power-negotation to the PMIC and charger
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [I2C] About warning 'DMA-API: device driver maps memory from stack'
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v3 6/8] PM / ACPI: Enable the runtime PM centric approach for system sleep
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• Re: [PATCH v3 1/8] PM / Sleep: Make the runtime PM centric path known to the PM core
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• [I2C] About warning 'DMA-API: device driver maps memory from stack'
  • From: Jun Gao <jun.gao@xxxxxxxxxxxx>
• [PULL REQUEST] i2c for 4.13
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• RE: [PATCH v4 3/3] eeprom: at24: enable runtime pm support
  • From: "Mohandass, Divagar" <divagar.mohandass@xxxxxxxxx>
• RE: [PATCH v4 1/3] dt-bindings: add eeprom "size" property
  • From: "Mohandass, Divagar" <divagar.mohandass@xxxxxxxxx>
• Re: [PATCH v3 0/8] PM / ACPI / i2c: Deploy runtime PM centric path for system sleep
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH v3 6/8] PM / ACPI: Enable the runtime PM centric approach for system sleep
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• [RESEND PATCH v3 2/5] i2c: i2c-stm32f4: use generic definition of speed enum
  • From: Pierre-Yves MORDRET <pierre-yves.mordret@xxxxxx>
• [RESEND PATCH v3 4/5] ARM: dts: stm32: Add I2C1 support for STM32F746 SoC
  • From: Pierre-Yves MORDRET <pierre-yves.mordret@xxxxxx>
• [RESEND PATCH v3 0/5] Add support for the STM32F7 I2C
  • From: Pierre-Yves MORDRET <pierre-yves.mordret@xxxxxx>
• [RESEND PATCH v3 5/5] ARM: dts: stm32: Add I2C1 support for STM32F746 eval board
  • From: Pierre-Yves MORDRET <pierre-yves.mordret@xxxxxx>
• [RESEND PATCH v3 3/5] i2c: i2c-stm32f7: add driver
  • From: Pierre-Yves MORDRET <pierre-yves.mordret@xxxxxx>
• [RESEND PATCH v3 1/5] dt-bindings: i2c-stm32: Document the STM32F7 I2C bindings
  • From: Pierre-Yves MORDRET <pierre-yves.mordret@xxxxxx>
• Re: [PATCH] i2c: sprd: Fix undefined reference errors
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: designware: Round down ACPI provided clk to nearest supported clk
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH/RFC 1/3] dt-bindings: i2c: i2c-gpio: Add support for named gpios
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v3 00/11] Hookup typec power-negotation to the PMIC and charger
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v4 3/3] eeprom: at24: enable runtime pm support
  • From: Sakari Ailus <sakari.ailus@xxxxxx>
• Re: [PATCH v4 1/3] dt-bindings: add eeprom "size" property
  • From: Rob Herring <robh@xxxxxxxxxx>
• RE: [PATCH v4 3/3] eeprom: at24: enable runtime pm support
  • From: "Mohandass, Divagar" <divagar.mohandass@xxxxxxxxx>
• Re: [PATCH v3 1/8] PM / Sleep: Make the runtime PM centric path known to the PM core
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH v3 0/8] PM / ACPI / i2c: Deploy runtime PM centric path for system sleep
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• Re: [PATCH v4 3/3] eeprom: at24: enable runtime pm support
  • From: Sakari Ailus <sakari.ailus@xxxxxx>
• Re: [RESEND PATCH v5 00/16] eeprom: at24: Add OF device ID table
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxx>
• Re: [RESEND PATCH v5 00/16] eeprom: at24: Add OF device ID table
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [RESEND PATCH v5 00/16] eeprom: at24: Add OF device ID table
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxx>
• Re: [RESEND PATCH v5 00/16] eeprom: at24: Add OF device ID table
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• RE: [PATCH v3 3/3] eeprom: at24: enable runtime pm support
  • From: "Mohandass, Divagar" <divagar.mohandass@xxxxxxxxx>
• [PATCH v4 2/3] eeprom: at24: add support to fetch eeprom device property "size"
  • From: Divagar Mohandass <divagar.mohandass@xxxxxxxxx>
• [PATCH v4 3/3] eeprom: at24: enable runtime pm support
  • From: Divagar Mohandass <divagar.mohandass@xxxxxxxxx>
• [PATCH v4 1/3] dt-bindings: add eeprom "size" property
  • From: Divagar Mohandass <divagar.mohandass@xxxxxxxxx>
• [PATCH v4 0/3] enable eeprom "size" property and runtime pm
  • From: Divagar Mohandass <divagar.mohandass@xxxxxxxxx>
• Re: [PATCH v3 09/11] power: supply: bq24190_charger: Get input_current_limit from our supplier
  • From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 08/11] power: supply: bq24190_charger: Export 5V boost converter as regulator
  • From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxxxx>
• Re: [RESEND PATCH v5 00/16] eeprom: at24: Add OF device ID table
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxx>
• Re: [PATCH v3 09/11] power: supply: bq24190_charger: Get input_current_limit from our supplier
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v3 08/11] power: supply: bq24190_charger: Export 5V boost converter as regulator
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v3 07/11] staging: typec: fusb302: Export current-limit through a power_supply class dev
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v3 05/11] staging: typec: fusb302: Use client->irq as irq if set
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v3 06/11] staging: typec: fusb302: Add support for USB2 charger detection through extcon
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v3 04/11] staging: typec: fusb302: Get max snk mv/ma/mw from device-properties
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v3 1/8] PM / Sleep: Make the runtime PM centric path known to the PM core
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• Re: [PATCH v3 03/11] staging: typec: fusb302: Set max supply voltage to 5V
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v3 3/3] eeprom: at24: enable runtime pm support
  • From: Sakari Ailus <sakari.ailus@xxxxxx>
• RE: [PATCH v3 3/3] eeprom: at24: enable runtime pm support
  • From: "Mohandass, Divagar" <divagar.mohandass@xxxxxxxxx>
• Re: [PATCH v3 0/8] PM / ACPI / i2c: Deploy runtime PM centric path for system sleep
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• [PATCH v3 03/11] staging: typec: fusb302: Set max supply voltage to 5V
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v3 07/11] staging: typec: fusb302: Export current-limit through a power_supply class dev
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v3 06/11] staging: typec: fusb302: Add support for USB2 charger detection through extcon
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v3 05/11] staging: typec: fusb302: Use client->irq as irq if set
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v3 04/11] staging: typec: fusb302: Get max snk mv/ma/mw from device-properties
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v3 02/11] staging: typec: tcpm: Add get_current_limit tcpc_dev callback
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v3 01/11] i2c: Allow overriding dev_name through board_info
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v3 00/11] Hookup typec power-negotation to the PMIC and charger
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v3 09/11] power: supply: bq24190_charger: Get input_current_limit from our supplier
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v3 08/11] power: supply: bq24190_charger: Export 5V boost converter as regulator
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v3 10/11] i2c-cht-wc: Add device-properties for fusb302 integration
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v3 11/11] platform/x86: intel_cht_int33fe: Update fusb302 type string, add properties
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v3 3/3] eeprom: at24: enable runtime pm support
  • From: Sakari Ailus <sakari.ailus@xxxxxx>
• Re: [PATCH] i2c: designware: Round down ACPI provided clk to nearest supported clk
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 1/8] PM / Sleep: Make the runtime PM centric path known to the PM core
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH v2 0/2] i2c: designware: add i2c gpio recovery option
  • From: Phil Reid <preid@xxxxxxxxxxxxxxxxx>
• [PATCH v3 4/4] i2c: designware: add i2c gpio recovery option
  • From: Phil Reid <preid@xxxxxxxxxxxxxxxxx>
• [PATCH v3 1/4] i2c: Switch to using gpiod interface for gpio bus recovery
  • From: Phil Reid <preid@xxxxxxxxxxxxxxxxx>
• [PATCH v3 3/4] i2c: designware: rename i2c_dw_plat_prepare_clk to i2c_dw_prepare_clk
  • From: Phil Reid <preid@xxxxxxxxxxxxxxxxx>
• [PATCH v3 0/4] i2c: designware: add i2c gpio recovery option
  • From: Phil Reid <preid@xxxxxxxxxxxxxxxxx>
• [PATCH v3 2/4] i2c: designware: move i2c_dw_plat_prepare_clk to common
  • From: Phil Reid <preid@xxxxxxxxxxxxxxxxx>
• [PATCH v3 3/3] eeprom: at24: enable runtime pm support
  • From: Divagar Mohandass <divagar.mohandass@xxxxxxxxx>
• [PATCH v3 2/3] eeprom: at24: add support to fetch eeprom device property "size"
  • From: Divagar Mohandass <divagar.mohandass@xxxxxxxxx>
• [PATCH v3 1/3] dt-bindings: add eeprom "size" property
  • From: Divagar Mohandass <divagar.mohandass@xxxxxxxxx>
• [PATCH v3 0/3] enable eeprom "size" property and runtime pm
  • From: Divagar Mohandass <divagar.mohandass@xxxxxxxxx>
• RE: [PATCH v2 3/3] eeprom: at24: enable runtime pm support
  • From: "Mohandass, Divagar" <divagar.mohandass@xxxxxxxxx>
• RE: [PATCH v2 2/3] eeprom: at24: add support to fetch eeprom device property "size"
  • From: "Mohandass, Divagar" <divagar.mohandass@xxxxxxxxx>
• RE: [PATCH v2 1/3] dt-bindings: add eeprom "size" property
  • From: "Mohandass, Divagar" <divagar.mohandass@xxxxxxxxx>
• [PATCH] i2c: sprd: Fix undefined reference errors
  • From: Baolin Wang <baolin.wang@xxxxxxxxxxxxxx>
• Re: [wsa:i2c/for-next 65/74] i2c-sprd.c:undefined reference to `i2c_del_adapter'
  • From: Baolin Wang <baolin.wang@xxxxxxxxxx>
• [wsa:i2c/for-next 65/74] i2c-sprd.c:undefined reference to `i2c_del_adapter'
  • From: kbuild test robot <fengguang.wu@xxxxxxxxx>
• Re: [PATCH] i2c: designware: Round down ACPI provided clk to nearest supported clk
  • From: Phil Reid <preid@xxxxxxxxxxxxxxxxx>
• [RFT][PATCH v2 1/3] PM / core: Add SAFE_SUSPEND driver flag
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• [RFT][PATCH v2 3/3] PM: i2c-designware-platdrv: System sleep handling rework
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• [RFT][PATCH v2 0/3] PM / ACPI / i2c: Runtime PM aware system sleep handling
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• [RFT][PATCH v2 2/3] PM / ACPI: Use SAFE_SUSPEND in the generic ACPI PM domain
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: designware: Round down ACPI provided clk to nearest supported clk
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: nomadik: constify amba_id
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: versatile: Make i2c_algo_bit_data const
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: busses: make i2c_adapter_quirks const
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 3/4] [media] radio-usb-si4713: make i2c_adapter const
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 4/4] [media] usb: make i2c_adapter const
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 2/4] [media] media: pci: make i2c_adapter const
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 1/4] i2c: busses: make i2c_adapter const
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v3 0/8] PM / ACPI / i2c: Deploy runtime PM centric path for system sleep
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: designware: Round down ACPI provided clk to nearest supported clk
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH 1/2] i2c: busses: make i2c_algorithm const
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: designware: Round down ACPI provided clk to nearest supported clk
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• RE: [PATCH 0/2] i2c: ismt: Fix length handling for SMBus block reads
  • From: Dan Priamo <danp@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 0/2] i2c: ismt: Fix length handling for SMBus block reads
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• RE: [PATCH 0/2] i2c: ismt: Fix length handling for SMBus block reads
  • From: Dan Priamo <danp@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 0/3] PM / ACPI / i2c: Runtime PM aware system sleep handling
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• Re: [PATCH 3/3] PM: i2c-designware-platdrv: System sleep handling rework
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• Re: [PATCH 3/3] PM: i2c-designware-platdrv: System sleep handling rework
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• Re: [PATCH 1/2] i2c: ismt: 16-byte align the DMA buffer address
  • From: radu.rendec@xxxxxxxxx
• Re: [PATCH v2 0/2] i2c: designware: add i2c gpio recovery option
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 6/8] PM / ACPI: Enable the runtime PM centric approach for system sleep
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• Re: [PATCH v3 1/8] PM / Sleep: Make the runtime PM centric path known to the PM core
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• Re: [PATCH 1/3] PM / core: Add SAFE_SUSPEND driver flag
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• Re: [PATCH 0/3] PM / ACPI / i2c: Runtime PM aware system sleep handling
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH 0/3] PM / ACPI / i2c: Runtime PM aware system sleep handling
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• Re: [PATCH 1/3] PM / core: Add SAFE_SUSPEND driver flag
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• [PATCH v3 3/8] PM / Sleep: Remove pm_complete_with_resume_check()
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• [PATCH v3 1/8] PM / Sleep: Make the runtime PM centric path known to the PM core
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• [PATCH v3 6/8] PM / ACPI: Enable the runtime PM centric approach for system sleep
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• [PATCH v3 5/8] PM / ACPI: Split acpi_lpss_suspend_late|resume_early()
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• [PATCH v3 8/8] i2c: designware: Deploy the runtime PM centric path for system sleep
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• [PATCH v3 4/8] PM / ACPI: Split code validating need for runtime resume in ->prepare()
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• [PATCH v3 7/8] i2c: designware: Don't resume device in the ->complete() callback
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• [PATCH v3 2/8] PM / ACPI: Restore acpi_subsys_complete()
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• [PATCH v3 0/8] PM / ACPI / i2c: Deploy runtime PM centric path for system sleep
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH 0/3] PM / ACPI / i2c: Runtime PM aware system sleep handling
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: designware: Round down ACPI provided clk to nearest supported clk
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH 0/3] PM / ACPI / i2c: Runtime PM aware system sleep handling
  • From: Johannes Stezenbach <js@xxxxxxxxx>
• Re: [PATCH] i2c: designware: Round down ACPI provided clk to nearest supported clk
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH] i2c: designware: Round down ACPI provided clk to nearest supported clk
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 11/14] power: supply: bq24190_charger: Get input_current_limit from our supplier
  • From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxxxx>
• [PATCH] i2c: designware: Round down ACPI provided clk to nearest supported clk
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v2 11/14] power: supply: bq24190_charger: Get input_current_limit from our supplier
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH 0/2] i2c: ismt: Fix length handling for SMBus block reads
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 0/3] PM / ACPI / i2c: Runtime PM aware system sleep handling
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH v2 11/14] power: supply: bq24190_charger: Get input_current_limit from our supplier
  • From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxxxx>
• Re: [PATCH 0/2] i2c: ismt: Fix length handling for SMBus block reads
  • From: Neil Horman <nhorman@xxxxxxxxxxxxx>
• Re: [PATCH v2 10/14] power: supply: bq24190_charger: Add input_current_limit property
  • From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 09/14] power: supply: bq24190_charger: Export 5V boost converter as regulator
  • From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxxxx>
• Re: [PATCH 0/3] PM / ACPI / i2c: Runtime PM aware system sleep handling
  • From: Johannes Stezenbach <js@xxxxxxxxx>
• Re: [PATCH v2 08/14] power: supply: Add power_supply_set_input_current_limit_from_supplier helper
  • From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxxxx>
• Re: [PATCH v5 2/2] i2c: Add Spreadtrum I2C controller driver
  • From: Baolin Wang <baolin.wang@xxxxxxxxxx>
• Re: [PATCH 0/2] i2c: ismt: Fix length handling for SMBus block reads
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v5 2/2] i2c: Add Spreadtrum I2C controller driver
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v5 1/2] dt-bindings: i2c: Add Spreadtrum I2C controller documentation
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH][i2c-next] i2c-cht-wc: make cht_wc_i2c_adap_driver static
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] MAINTAINERS: Add entry for drivers/i2c/busses/i2c-cht-wc.c
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 2/2] HID: i2c-hid: Do not bind to CHPN0001 touchscreen
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [RESEND PATCH v5 00/16] eeprom: at24: Add OF device ID table
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: aspeed: Retain delay/setup/hold values when configuring bus frequency
  • From: Andrew Jeffery <andrew@xxxxxxxx>
• Re: [PATCH] i2c: aspeed: Retain delay/setup/hold values when configuring bus frequency
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [RESEND PATCH v5 00/16] eeprom: at24: Add OF device ID table
  • From: Javier Martinez Canillas <javier@xxxxxxxxxxxx>
• Re: [PATCH 2/2] HID: i2c-hid: Do not bind to CHPN0001 touchscreen
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH] i2c: aspeed: Retain delay/setup/hold values when configuring bus frequency
  • From: Andrew Jeffery <andrew@xxxxxxxx>
• [PATCH v5 2/2] i2c: Add Spreadtrum I2C controller driver
  • From: Baolin Wang <baolin.wang@xxxxxxxxxxxxxx>
• [PATCH v5 1/2] dt-bindings: i2c: Add Spreadtrum I2C controller documentation
  • From: Baolin Wang <baolin.wang@xxxxxxxxxxxxxx>
• Re: [RESEND PATCH v4 2/2] i2c: Add Spreadtrum I2C controller driver
  • From: Baolin Wang <baolin.wang@xxxxxxxxxx>
• RE: [PATCH 1/1] i2c: i801: Restore the presence state of P2SB PCI device after reading BAR
  • From: "Zhuo, Qiuxu" <qiuxu.zhuo@xxxxxxxxx>
• [PATCH 0/3] PM / ACPI / i2c: Runtime PM aware system sleep handling
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• [PATCH 2/3] PM / ACPI: Use SAFE_SUSPEND in the generic ACPI PM domain
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• [PATCH 1/3] PM / core: Add SAFE_SUSPEND driver flag
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• [PATCH 3/3] PM: i2c-designware-platdrv: System sleep handling rework
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• Re: [PATCH v2 5/9] PM / ACPI: Provide option to disable direct_complete for ACPI devices
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• Re: [PATCH v2 11/14] power: supply: bq24190_charger: Get input_current_limit from our supplier
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v2 11/14] power: supply: bq24190_charger: Get input_current_limit from our supplier
  • From: Liam Breck <liam@xxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 11/14] power: supply: bq24190_charger: Get input_current_limit from our supplier
  • From: Liam Breck <liam@xxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] HID: i2c-hid: Do not bind to CHPN0001 touchscreen
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH] MAINTAINERS: Add entry for drivers/i2c/busses/i2c-cht-wc.c
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH 2/2] HID: i2c-hid: Do not bind to CHPN0001 touchscreen
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH v2 04/14] staging: typec: fusb302: Get max snk mv/ma/mw from device-properties
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH] i2c: aspeed: Retain delay/setup/hold values when configuring bus frequency
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v2 11/14] power: supply: bq24190_charger: Get input_current_limit from our supplier
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [RESEND PATCH v5 00/16] eeprom: at24: Add OF device ID table
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 1/1] i2c: i801: Restore the presence state of P2SB PCI device after reading BAR
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PULL REQUEST] i2c-mux for 4.14-rc1
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [RESEND PATCH v4 2/2] i2c: Add Spreadtrum I2C controller driver
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PULL REQUEST] i2c-mux for 4.14-rc1
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH v2 5/9] PM / ACPI: Provide option to disable direct_complete for ACPI devices
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH 0/2] i2c: ismt: Fix length handling for SMBus block reads
  • From: Stephen Douthit <stephend@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 5/9] PM / ACPI: Provide option to disable direct_complete for ACPI devices
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• Re: [PATCH 2/2] HID: i2c-hid: Do not bind to CHPN0001 touchscreen
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH 0/6] serdev multiplexing support
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH v2 5/9] PM / ACPI: Provide option to disable direct_complete for ACPI devices
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH 2/2] HID: i2c-hid: Do not bind to CHPN0001 touchscreen
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v2 5/9] PM / ACPI: Provide option to disable direct_complete for ACPI devices
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• Re: [PATCH 2/2] HID: i2c-hid: Do not bind to CHPN0001 touchscreen
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v2 5/9] PM / ACPI: Provide option to disable direct_complete for ACPI devices
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH/RFC 1/3] dt-bindings: i2c: i2c-gpio: Add support for named gpios
  • From: Simon Horman <horms@xxxxxxxxxxxx>
• Re: [RESEND PATCH v4 2/2] i2c: Add Spreadtrum I2C controller driver
  • From: Baolin Wang <baolin.wang@xxxxxxxxxx>
• Re: [PATCH v2 5/9] PM / ACPI: Provide option to disable direct_complete for ACPI devices
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• Re: [PATCH v2 3/3] mfd: twl: move header file out of I2C realm
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [RESEND PATCH v4 2/2] i2c: Add Spreadtrum I2C controller driver
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 1/2] i2c: ismt: 16-byte align the DMA buffer address
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] MAINTAINERS: drop entry for Blackfin I2C and Sonic's email
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH RESEND] blackfin: merge the two TWI header files
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v2 1/3] i2c: davinci: Preserve return value of devm_clk_get
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v4 2/3] dt-bindings: i2c: Add MediaTek MT7622 i2c binding
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v4 3/3] i2c: mediatek: Add i2c compatible for MediaTek MT7622
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v4 1/3] dt-bindings: i2c: modify information formats
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PULL REQUEST] i2c-mux for 4.14-rc1
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [RFC PATCH v4 3/6] i2c: add docs to clarify DMA handling
  • From: Mauro Carvalho Chehab <mchehab@xxxxxxxxxxxxxxxx>
• Re: [PATCH v4 1/2] wire: export w1_touch_bit
  • From: Evgeniy Polyakov <zbr@xxxxxxxxxxx>
• [PATCH] i2c: gpio: add fault injector
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• [PULL REQUEST] i2c for 4.13
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v2 0/9] PM / ACPI / i2c: Deploy runtime PM centric path for system sleep
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 5/9] PM / ACPI: Provide option to disable direct_complete for ACPI devices
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• Re: [PATCH v2 5/9] PM / ACPI: Provide option to disable direct_complete for ACPI devices
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• Re: [PATCH v2 5/9] PM / ACPI: Provide option to disable direct_complete for ACPI devices
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH v2 5/9] PM / ACPI: Provide option to disable direct_complete for ACPI devices
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH v2 5/9] PM / ACPI: Provide option to disable direct_complete for ACPI devices
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• Re: [PATCH v2 5/9] PM / ACPI: Provide option to disable direct_complete for ACPI devices
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• Re: [PATCH v2 5/9] PM / ACPI: Provide option to disable direct_complete for ACPI devices
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• Re: [PATCH v2 0/2] i2c: designware: add i2c gpio recovery option
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v11 04/10] i2c: core: call of_i2c_setup_smbus_alert in i2c_register_adapter
  • From: Phil Reid <preid@xxxxxxxxxxxxxxxxx>
• [PATCH v11 05/10] i2c: mux: pca954x: call request irq after adding mux segments
  • From: Phil Reid <preid@xxxxxxxxxxxxxxxxx>
• [PATCH v11 06/10] i2c: mux: pca954x: Return error if irq_create_mapping fails
  • From: Phil Reid <preid@xxxxxxxxxxxxxxxxx>
• [PATCH v11 03/10] i2c: i2c-smbus: add of_i2c_setup_smbus_alert
  • From: Phil Reid <preid@xxxxxxxxxxxxxxxxx>
• [PATCH v11 00/10] Add sbs-manager with smbalert support
  • From: Phil Reid <preid@xxxxxxxxxxxxxxxxx>
• [PATCH v11 01/10] i2c: i2c-smbus: Use threaded irq for smbalert
  • From: Phil Reid <preid@xxxxxxxxxxxxxxxxx>
• [PATCH v11 09/10] power: supply: sbs-manager: Add alert callback and battery change notification
  • From: Phil Reid <preid@xxxxxxxxxxxxxxxxx>
• [PATCH v11 08/10] power: Adds support for Smart Battery System Manager
  • From: Phil Reid <preid@xxxxxxxxxxxxxxxxx>
• [PATCH v11 10/10] power: supply: sbs-battery: move gpio present detect to sbs_get_property
  • From: Phil Reid <preid@xxxxxxxxxxxxxxxxx>
• [PATCH v11 07/10] Documentation: Add sbs-manager device tree node documentation
  • From: Phil Reid <preid@xxxxxxxxxxxxxxxxx>
• [PATCH v11 02/10] i2c: i2c-smbus: Move i2c_setup_smbus_alert from i2c-smbus to i2c-core-smbus
  • From: Phil Reid <preid@xxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 0/2] i2c: designware: add i2c gpio recovery option
  • From: Phil Reid <preid@xxxxxxxxxxxxxxxxx>
• [PATCH/RFC 2/3] i2c: gpio: Add support for named gpios in DT
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• [PATCH/RFC 1/3] dt-bindings: i2c: i2c-gpio: Add support for named gpios
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• [PATCH/RFC 0/3] i2c: gpio: Add support for named gpios in DT
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• [PATCH/RFC 3/3] ARM: dts: armadillo800eva: Convert to named i2c-gpio bindings
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• Re: [PATCH v2 5/9] PM / ACPI: Provide option to disable direct_complete for ACPI devices
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH v2 5/9] PM / ACPI: Provide option to disable direct_complete for ACPI devices
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• [PULL REQUEST] i2c-mux for 4.14-rc1
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH v2 5/9] PM / ACPI: Provide option to disable direct_complete for ACPI devices
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• Re: [PATCH v2 5/9] PM / ACPI: Provide option to disable direct_complete for ACPI devices
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• Re: [PATCH v2 5/9] PM / ACPI: Provide option to disable direct_complete for ACPI devices
  • From: "Rafael J. Wysocki" <rjw@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: aspeed: Retain delay/setup/hold values when configuring bus frequency
  • From: Brendan Higgins <brendanhiggins@xxxxxxxxxx>
• Re: [PATCH v2 5/9] PM / ACPI: Provide option to disable direct_complete for ACPI devices
  • From: "Rafael J. Wysocki" <rafael@xxxxxxxxxx>
• Re: [PATCH v2 1/9] PM / ACPI: Restore acpi_subsys_complete()
  • From: "Rafael J. Wysocki" <rafael@xxxxxxxxxx>
• Re: [PATCH v2] i2c: core: add device-managed version of i2c_new_dummy
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH] i2c: nomadik: constify amba_id
  • From: Arvind Yadav <arvind.yadav.cs@xxxxxxxxx>
• [PATCH v2 5/9] PM / ACPI: Provide option to disable direct_complete for ACPI devices
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• [PATCH v2 6/9] PM / ACPI: Enable the runtime PM centric approach for system sleep
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• [PATCH v2 7/9] PM / ACPI: Avoid runtime resuming device in acpi_subsys_suspend|freeze()
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• [PATCH v2 2/9] PM / Sleep: Remove pm_complete_with_resume_check()
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• [PATCH v2 9/9] i2c: designware: Deploy the runtime PM centric approach for system sleep
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• [PATCH v2 8/9] i2c: designware: Don't resume device in the ->complete() callback
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• [PATCH v2 1/9] PM / ACPI: Restore acpi_subsys_complete()
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• [PATCH v2 4/9] PM / ACPI: Split acpi_lpss_suspend_late|resume_early()
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• [PATCH v2 3/9] PM / ACPI: Split code validating need for runtime resume in ->prepare()
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• [PATCH v2 0/9] PM / ACPI / i2c: Deploy runtime PM centric path for system sleep
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• [PATCH] i2c: designware: Don't set SCL timings and speed mode when in slave mode
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH v2] i2c: core: add device-managed version of i2c_new_dummy
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH v4 2/3] dt-bindings: i2c: Add MediaTek MT7622 i2c binding
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v4 1/3] dt-bindings: i2c: modify information formats
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 1/4] i2c: busses: make i2c_adapter const
  • From: David Daney <ddaney@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 0/5] Add support for the STM32F7 I2C
  • From: Pierre Yves MORDRET <pierre-yves.mordret@xxxxxx>
• Re: [PATCH v2 3/3] mfd: twl: move header file out of I2C realm
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v2 2/3] eeprom: at24: add support to fetch eeprom device property "size"
  • From: Sakari Ailus <sakari.ailus@xxxxxx>
• Re: [PATCH v2 1/3] dt-bindings: add eeprom "size" property
  • From: Sakari Ailus <sakari.ailus@xxxxxx>
• Re: [PATCH v2 3/3] eeprom: at24: enable runtime pm support
  • From: Sakari Ailus <sakari.ailus@xxxxxx>
• RE: [PATCH 1/1] i2c: i801: Restore the presence state of P2SB PCI device after reading BAR
  • From: "Zhuo, Qiuxu" <qiuxu.zhuo@xxxxxxxxx>
• Re: [PATCH] i2c: mux: i2c-arb-gpio-challenge: allow compiling w/o OF support
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH] i2c: Documentation: i2c-topology: mention recent driver additions
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH v2] i2c: core: add device-managed version of i2c_new_dummy
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• Re: [PATCH] i2c: core: add device-managed version of i2c_new_dummy
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• Re: [PATCH v2 2/3] i2c: davinci: Add PM Runtime Support
  • From: Sekhar Nori <nsekhar@xxxxxx>
• Re: [PATCH v2 2/3] i2c: davinci: Add PM Runtime Support
  • From: Franklin S Cooper Jr <fcooper@xxxxxx>
• Re: [PATCH] i2c: core: add device-managed version of i2c_new_dummy
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH] i2c: core: add device-managed version of i2c_new_dummy
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• Re: [PATCH] i2c: core: add device-managed version of i2c_new_dummy
  • From: Peter Rosin <peda@xxxxxxxxxx>
• [PATCH] i2c: core: add device-managed version of i2c_new_dummy
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH] i2c: versatile: Make i2c_algo_bit_data const
  • From: Bhumika Goyal <bhumirks@xxxxxxxxx>
• [PATCH] i2c: busses: make i2c_adapter_quirks const
  • From: Bhumika Goyal <bhumirks@xxxxxxxxx>
• Re: [PATCH v2 3/3] dt-bindings: i2c: i2c-davinci: Update binding for 66AK2Gx pwr dm property
  • From: Sekhar Nori <nsekhar@xxxxxx>
• Re: [PATCH v2 1/3] i2c: davinci: Preserve return value of devm_clk_get
  • From: Sekhar Nori <nsekhar@xxxxxx>
• Re: [PATCH v2 2/3] i2c: davinci: Add PM Runtime Support
  • From: Sekhar Nori <nsekhar@xxxxxx>
• Re: [PATCH v2 2/3] i2c: davinci: Add PM Runtime Support
  • From: Sekhar Nori <nsekhar@xxxxxx>
• Re: [PATCH 5/6] ARM: dts: blanche: add SCIF1 and MAX9260 deserializer
  • From: Simon Horman <horms@xxxxxxxxxxxx>
• [PATCH v4 2/3] dt-bindings: i2c: Add MediaTek MT7622 i2c binding
  • From: Jun Gao <jun.gao@xxxxxxxxxxxx>
• [PATCH v4 1/3] dt-bindings: i2c: modify information formats
  • From: Jun Gao <jun.gao@xxxxxxxxxxxx>
• [PATCH v4 3/3] i2c: mediatek: Add i2c compatible for MediaTek MT7622
  • From: Jun Gao <jun.gao@xxxxxxxxxxxx>
• [PATCH v4 0/3] Add i2c dt-binding and compatible for Mediatek MT7622 SoC
  • From: Jun Gao <jun.gao@xxxxxxxxxxxx>
• [PATCH] i2c: mux: reg: use of_property_read_bool()
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: [RFC PATCH v4 0/6] i2c: document DMA handling and add helpers for it
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 4/4] [media] usb: make i2c_adapter const
  • From: isely@xxxxxxxxx
• Re: [PATCH 2/2] [media] usb: make i2c_algorithm const
  • From: isely@xxxxxxxxx
• [PATCH 2/4] [media] media: pci: make i2c_adapter const
  • From: Bhumika Goyal <bhumirks@xxxxxxxxx>
• [PATCH 1/4] i2c: busses: make i2c_adapter const
  • From: Bhumika Goyal <bhumirks@xxxxxxxxx>
• [PATCH 3/4] [media] radio-usb-si4713: make i2c_adapter const
  • From: Bhumika Goyal <bhumirks@xxxxxxxxx>
• [PATCH 4/4] [media] usb: make i2c_adapter const
  • From: Bhumika Goyal <bhumirks@xxxxxxxxx>
• [PATCH 0/4] drivers: make i2c_adapter const
  • From: Bhumika Goyal <bhumirks@xxxxxxxxx>
• [PATCH 2/2] [media] usb: make i2c_algorithm const
  • From: Bhumika Goyal <bhumirks@xxxxxxxxx>
• [PATCH 1/2] i2c: busses: make i2c_algorithm const
  • From: Bhumika Goyal <bhumirks@xxxxxxxxx>
• [PATCH 0/2] drivers: make i2c_algorithm const
  • From: Bhumika Goyal <bhumirks@xxxxxxxxx>
• [PATCH 2/2] i2c: ismt: dump registers at the end of transactions
  • From: Radu Rendec <radu.rendec@xxxxxxxxx>
• [PATCH 1/2] i2c: ismt: 16-byte align the DMA buffer address
  • From: Radu Rendec <radu.rendec@xxxxxxxxx>
• [PATCH 0/2] i2c: ismt: align the DMA buffer to avoid parity errors
  • From: Radu Rendec <radu.rendec@xxxxxxxxx>
• Re: [PATCH] i2c: core: Prevent race condition when removing i2c devices
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH v3 3/5] iio: srf08: add triggered buffer support
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 2/5] iio: srf08: add device tree table
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>