Most systems with this i2c are going to have a clock of either 33.3MHz or
32MHz. That 4% difference is not reason enough to warrant that the driver
to completely fail.
Signed-off-by: Chris Brandt <chris.brandt@xxxxxxxxxxx>
---
drivers/i2c/busses/i2c-riic.c | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/drivers/i2c/busses/i2c-riic.c b/drivers/i2c/busses/i2c-riic.c
index c811af4c8d81..0a61beeb384a 100644
--- a/drivers/i2c/busses/i2c-riic.c
+++ b/drivers/i2c/busses/i2c-riic.c
@@ -299,12 +299,13 @@ static int riic_init_hw(struct riic_dev *riic, u32 spd)
/*
* TODO: Implement formula to calculate the timing values depending on
- * variable parent clock rate and arbitrary bus speed
+ * variable parent clock rate and arbitrary bus speed.
+ * For now, just use calculations based on a 33325000Hz clock.
*/
rate = clk_get_rate(riic->clk);
- if (rate != 33325000) {
+ if (!rate) {
dev_err(&riic->adapter.dev,
- "invalid parent clk (%lu). Must be 33325000Hz\n", rate);
+ "invalid parent clk (%lu)\n", rate);
clk_disable_unprepare(riic->clk);
return -EINVAL;
}
--
2.14.1
