Linux Kernel I2C

• Thread Index

• Re: [PATCH] i2c: piix4: Replace piix4_smbus driver's cd6h/cd7h port io accesses with mmio accesses
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PULL REQUEST] i2c for v5.16
  • From: pr-tracker-bot@xxxxxxxxxx
• [PATCH v2 4/4] i2c: muxes: pca954x: Add regulator support
  • From: Patrick Rudolph <patrick.rudolph@xxxxxxxxxxxxx>
• [PATCH v2 3/4] dt-bindings: i2c: Add regulator to pca954x and max735x
  • From: Patrick Rudolph <patrick.rudolph@xxxxxxxxxxxxx>
• [PATCH v2 2/4] i2c: muxes: pca954x: Add MAX735x/MAX736x support
  • From: Patrick Rudolph <patrick.rudolph@xxxxxxxxxxxxx>
• [PATCH v2 1/4] dt-bindings: i2c: Add Maxim MAX735x/MAX736x variants
  • From: Patrick Rudolph <patrick.rudolph@xxxxxxxxxxxxx>
• [PATCH v2 0/4] Add support for Maxim MAX735x/MAX736x variants
  • From: Patrick Rudolph <patrick.rudolph@xxxxxxxxxxxxx>
• Re: Wrong piix4_smbus address / slow trackpoint on Thinkpad P14s gen 2 (AMD)
  • From: Miroslav Bendík <miroslav.bendik@xxxxxxxxx>
• [PULL REQUEST] i2c for v5.16
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• [PATCH 2/2] i2c: mediatek: Add i2c compatible for Mediatek MT8186
  • From: Kewei Xu <kewei.xu@xxxxxxxxxxxx>
• [PATCH 1/2] dt-bindings: i2c: update bindings for MT8186 SoC
  • From: Kewei Xu <kewei.xu@xxxxxxxxxxxx>
• [PATCH 0/2] add i2c support for mt8186
  • From: Kewei Xu <kewei.xu@xxxxxxxxxxxx>
• [PATCH -next] i2c: sh_mobile: remove unneeded semicolon
  • From: Yang Li <yang.lee@xxxxxxxxxxxxxxxxx>
• Re: [PATCH v3] i2c: i801: Safely share SMBus with BIOS/ACPI
  • From: Hector Martin <marcan@xxxxxxxxx>
• Re: [PATCH v2] i2c: cadence: Add standard bus recovery support
  • From: Robert Hancock <robert.hancock@xxxxxxxxxx>
• Re: [PATCH] Revert "i2c: core: support bus regulator controlling in adapter"
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH] Revert "i2c: core: support bus regulator controlling in adapter"
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH] Revert "i2c: core: support bus regulator controlling in adapter"
  • From: Konstantin Kharlamov <hi-angel@xxxxxxxxx>
• Re: [RFC 01/32] Kconfig: introduce and depend on LEGACY_PCI
  • From: John Garry <john.garry@xxxxxxxxxx>
• Re: [PATCH v3 3/8] platform/x86/intel: Add Primary to Sideband (P2SB) bridge support
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: [PATCH v3 3/8] platform/x86/intel: Add Primary to Sideband (P2SB) bridge support
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: Wrong piix4_smbus address / slow trackpoint on Thinkpad P14s gen 2 (AMD)
  • From: Miroslav Bendík <miroslav.bendik@xxxxxxxxx>
• [PATCH] check parameter for i2c driver interface and improve efficieny for the issues.
  • From: "Zhou,Junde" <junde.zhou@xxxxxxxxx>
• Re: [PATCH v3 3/8] platform/x86/intel: Add Primary to Sideband (P2SB) bridge support
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• [PATCH] dt-bindings: i2c: st,stm32-i2c: Make each example a separate entry
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: Wrong piix4_smbus address / slow trackpoint on Thinkpad P14s gen 2 (AMD)
  • From: Andrea Ippolito <andrea.ippo@xxxxxxxxx>
• Re: [PATCH] i2c: piix4: Replace piix4_smbus driver's cd6h/cd7h port io accesses with mmio accesses
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [RFC 01/32] Kconfig: introduce and depend on LEGACY_PCI
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: Wrong piix4_smbus address / slow trackpoint on Thinkpad P14s gen 2 (AMD)
  • From: Miroslav Bendík <miroslav.bendik@xxxxxxxxx>
• Re: [RFC 01/32] Kconfig: introduce and depend on LEGACY_PCI
  • From: John Garry <john.garry@xxxxxxxxxx>
• Re: [PATCH] i2c: mpc: Avoid out of bounds memory access
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: Touchpad bug affecting several laptops
  • From: Andrea Ippolito <andrea.ippo@xxxxxxxxx>
• Re: [GIT PULL] at24: updates for v5.17
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: mt7621 i2c fails with upstream driver
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: Touchpad bug affecting several laptops
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: Touchpad stickiness on Dell Inspiron/XPS
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH] i2c: piix4: Replace piix4_smbus driver's cd6h/cd7h port io accesses with mmio accesses
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: Wrong piix4_smbus address / slow trackpoint on Thinkpad P14s gen 2 (AMD)
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: Wrong piix4_smbus address / slow trackpoint on Thinkpad P14s gen 2 (AMD)
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• [PATCH] Revert "i2c: core: support bus regulator controlling in adapter"
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [bisected][regression] Applications that need amdgpu doesn't run after waking up from suspend
  • From: "wsa@xxxxxxxxxx" <wsa@xxxxxxxxxx>
• Re: Bug: amdgpu stutter and spam `Fence fallback timer expired` after suspend
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: Bug: amdgpu stutter and spam `Fence fallback timer expired` after suspend
  • From: Konstantin Kharlamov <hi-angel@xxxxxxxxx>
• Bug: amdgpu stutter and spam `Fence fallback timer expired` after suspend
  • From: Konstantin Kharlamov <hi-angel@xxxxxxxxx>
• Re: [RFC 01/32] Kconfig: introduce and depend on LEGACY_PCI
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: Wrong piix4_smbus address / slow trackpoint on Thinkpad P14s gen 2 (AMD)
  • From: Miroslav Bendík <miroslav.bendik@xxxxxxxxx>
• Re: [RFC 01/32] Kconfig: introduce and depend on LEGACY_PCI
  • From: John Garry <john.garry@xxxxxxxxxx>
• [PATCH v3 1/5] i2c: Introduce common module to instantiate CCGx UCSI
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v3 4/5] i2c: nvidia-gpu: Convert to use dev_err_probe()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v3 5/5] i2c: designware-pci: Switch to use i2c_new_ccgx_ucsi()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v3 2/5] i2c: nvidia-gpu: Switch to use i2c_new_ccgx_ucsi()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v3 3/5] i2c: nvidia-gpu: Use temporary variable for struct device
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: mt7621 i2c fails with upstream driver
  • From: Kristian Evensen <kristian.evensen@xxxxxxxxx>
• mt7621 i2c fails with upstream driver
  • From: Kristian Evensen <kristian.evensen@xxxxxxxxx>
• Touchpad bug affecting several laptops
  • From: Andrea Ippolito <andrea.ippo@xxxxxxxxx>
• [PATCH] i2c: mpc: Avoid out of bounds memory access
  • From: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3] i2c: i801: Safely share SMBus with BIOS/ACPI
  • From: Alex Henrie <alexh@xxxxxxxxxxx>
• Re: [PATCH] i2c: piix4: Replace piix4_smbus driver's cd6h/cd7h port io accesses with mmio accesses
  • From: Terry Bowman <Terry.Bowman@xxxxxxx>
• RE: [PATCH 1/2] device property: Add device_irq_get_byname
  • From: Akhil R <akhilrajeev@xxxxxxxxxx>
• Re: [PATCH 00/12] ACPI / pdx86: Add support for x86 Android tablets with broken DSDTs
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [GIT PULL] at24: updates for v5.17
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH] i2c-detect: fix a typo argment -> argument
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [RFC Patch v2 0/3] I2C statistics as sysfs attributes
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v2 3/3] i2c: riic: Use platform_get_irq() to get the interrupt
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/3] i2c: sh_mobile: Use platform_get_irq_optional() to get the interrupt
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/3] i2c: bcm2835: Use platform_get_irq() to get the interrupt
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• [PATCH v3 2/2] devicetree bindings I2C Add bindings doc for Sunplus SP7021
  • From: Li-hao Kuo <lhjeff911@xxxxxxxxx>
• [PATCH v3 1/2] I2C: Add I2C driver for Sunplus SP7021
  • From: Li-hao Kuo <lhjeff911@xxxxxxxxx>
• [PATCH v3 0/2] Add I2C control driver for Sunplus SP7021 SoC
  • From: Li-hao Kuo <lhjeff911@xxxxxxxxx>
• Re: [PULL REQUEST] i2c for v5.16
  • From: pr-tracker-bot@xxxxxxxxxx
• [PULL REQUEST] i2c for v5.16
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v2] Docs: Fixes link to I2C specification
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v3] i2c: validate user data in compat ioctl
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• [PATCH v3] i2c: validate user data in compat ioctl
  • From: Pavel Skripkin <paskripkin@xxxxxxxxx>
• Re: [PATCH v2] i2c: don't pass 0 nmsgs to i2c_transfer
  • From: Pavel Skripkin <paskripkin@xxxxxxxxx>
• Re: [PATCH v2] i2c: don't pass 0 nmsgs to i2c_transfer
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v2 1/3] ACPI / x86: Add acpi_quirk_skip_[i2c_client|serdev]_enumeration() helpers
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v2 1/3] ACPI / x86: Add acpi_quirk_skip_[i2c_client|serdev]_enumeration() helpers
  • From: "Rafael J. Wysocki" <rafael@xxxxxxxxxx>
• Re: [PATCH v2 1/3] ACPI / x86: Add acpi_quirk_skip_[i2c_client|serdev]_enumeration() helpers
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v2 1/3] ACPI / x86: Add acpi_quirk_skip_[i2c_client|serdev]_enumeration() helpers
  • From: "Rafael J. Wysocki" <rafael@xxxxxxxxxx>
• Re: [PATCH v2 1/3] ACPI / x86: Add acpi_quirk_skip_[i2c_client|serdev]_enumeration() helpers
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v2 2/3] i2c: acpi: Do not instantiate I2C-clients on boards with known bogus DSDT entries
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v2 1/3] ACPI / x86: Add acpi_quirk_skip_[i2c_client|serdev]_enumeration() helpers
  • From: "Rafael J. Wysocki" <rafael@xxxxxxxxxx>
• [PATCH v2 3/3] serdev: Do not instantiate serdevs on boards with known bogus DSDT entries
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v2 2/3] i2c: acpi: Do not instantiate I2C-clients on boards with known bogus DSDT entries
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v2 0/3] ACPI / pdx86: Add support for x86 Android tablets with broken DSDTs
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v2 1/3] ACPI / x86: Add acpi_quirk_skip_[i2c_client|serdev]_enumeration() helpers
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH 03/12] serdev: Do not instantiate serdevs on boards with known bogus DSDT entries
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 02/12] i2c: acpi: Do not instantiate I2C-clients on boards with known bogus DSDT entries
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH 02/12] i2c: acpi: Do not instantiate I2C-clients on boards with known bogus DSDT entries
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH 02/12] i2c: acpi: Do not instantiate I2C-clients on boards with known bogus DSDT entries
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH 00/12] ACPI / pdx86: Add support for x86 Android tablets with broken DSDTs
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• [PATCH 12/12] platform/x86: x86-android-tablets: Add TM800A550L data
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH 11/12] platform/x86: x86-android-tablets: Add Asus MeMO Pad 7 ME176C data
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH 10/12] platform/x86: x86-android-tablets: Add Asus TF103C data
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH 09/12] platform/x86: x86-android-tablets: Add support for preloading modules
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH 08/12] platform/x86: x86-android-tablets: Add support for registering GPIO lookup tables
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH 07/12] platform/x86: x86-android-tablets: Add support for instantiating serdevs
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH 06/12] platform/x86: x86-android-tablets: Add support for instantiating platform-devs
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH 05/12] platform/x86: x86-android-tablets: Add support for PMIC interrupts
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH 04/12] platform/x86: x86-android-tablets: Don't return -EPROBE_DEFER from a non probe() function
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH 03/12] serdev: Do not instantiate serdevs on boards with known bogus DSDT entries
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH 02/12] i2c: acpi: Do not instantiate I2C-clients on boards with known bogus DSDT entries
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH 01/12] ACPI / x86: Add acpi_quirk_skip_[i2c_client|serdev]_enumeration() helpers
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH 00/12] ACPI / pdx86: Add support for x86 Android tablets with broken DSDTs
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [RFC 01/32] Kconfig: introduce and depend on LEGACY_PCI
  • From: Niklas Schnelle <schnelle@xxxxxxxxxxxxx>
• Re: [RFC 01/32] Kconfig: introduce and depend on LEGACY_PCI
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: [RFC 01/32] Kconfig: introduce and depend on LEGACY_PCI
  • From: Mauro Carvalho Chehab <mchehab@xxxxxxxxxx>
• Re: [RFC 01/32] Kconfig: introduce and depend on LEGACY_PCI
  • From: Niklas Schnelle <schnelle@xxxxxxxxxxxxx>
• Re: [RFC 01/32] Kconfig: introduce and depend on LEGACY_PCI
  • From: Mauro Carvalho Chehab <mchehab@xxxxxxxxxx>
• Re: [RFC 01/32] Kconfig: introduce and depend on LEGACY_PCI
  • From: Niklas Schnelle <schnelle@xxxxxxxxxxxxx>
• Re: [RFC 01/32] Kconfig: introduce and depend on LEGACY_PCI
  • From: Mauro Carvalho Chehab <mchehab@xxxxxxxxxx>
• Re: [RFC 10/32] i2c: Kconfig: add HAS_IOPORT dependencies
  • From: Niklas Schnelle <schnelle@xxxxxxxxxxxxx>
• Re: [RFC 01/32] Kconfig: introduce and depend on LEGACY_PCI
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [RFC 01/32] Kconfig: introduce and depend on LEGACY_PCI
  • From: Niklas Schnelle <schnelle@xxxxxxxxxxxxx>
• Re: [RFC 10/32] i2c: Kconfig: add HAS_IOPORT dependencies
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [RFC 01/32] Kconfig: introduce and depend on LEGACY_PCI
  • From: Mauro Carvalho Chehab <mchehab@xxxxxxxxxx>
• Re: [RFC 01/32] Kconfig: introduce and depend on LEGACY_PCI
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [RFC 01/32] Kconfig: introduce and depend on LEGACY_PCI
  • From: Mauro Carvalho Chehab <mchehab@xxxxxxxxxx>
• Re: [RFC 01/32] Kconfig: introduce and depend on LEGACY_PCI
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v2 1/5] i2c: Introduce common module to instantiate CCGx UCSI
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [RFC 01/32] Kconfig: introduce and depend on LEGACY_PCI
  • From: Niklas Schnelle <schnelle@xxxxxxxxxxxxx>
• [RFC 10/32] i2c: Kconfig: add HAS_IOPORT dependencies
  • From: Niklas Schnelle <schnelle@xxxxxxxxxxxxx>
• Re: [RFC 2/2] i2c: designware: Add AMD PSP I2C bus support
  • From: Jan Dąbroś <jsd@xxxxxxxxxxxx>
• Re: [RFC 1/2] i2c: designware: Add missing locks
  • From: Jan Dąbroś <jsd@xxxxxxxxxxxx>
• Re: [RFC 0/2] i2c-designware: Add support for AMD PSP semaphore
  • From: Jan Dąbroś <jsd@xxxxxxxxxxxx>
• Re: [PATCH v3 4/8] pinctrl: intel: Check against matching data instead of ACPI companion
  • From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/5] i2c: Introduce common module to instantiate CCGx UCSI
  • From: "Shah, Nehal-bakulchandra" <nehal-bakulchandra.shah@xxxxxxx>
• Re: [PATCH v2 2/3] i2c: sh_mobile: Use platform_get_irq_optional() to get the interrupt
  • From: "Lad, Prabhakar" <prabhakar.csengg@xxxxxxxxx>
• Re: [PATCH v2 2/3] i2c: sh_mobile: Use platform_get_irq_optional() to get the interrupt
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• RE: [PATCH v2 2/3] i2c: sh_mobile: Use platform_get_irq_optional() to get the interrupt
  • From: Prabhakar Mahadev Lad <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
• [PATCH v2] i2c: don't pass 0 nmsgs to i2c_transfer
  • From: Pavel Skripkin <paskripkin@xxxxxxxxx>
• Re: [PATCH v2 2/3] i2c: sh_mobile: Use platform_get_irq_optional() to get the interrupt
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [RFC 0/2] i2c-designware: Add support for AMD PSP semaphore
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH] i2c: don't pass 0 nmsgs to i2c_transfer
  • From: Pavel Skripkin <paskripkin@xxxxxxxxx>
• Re: [syzbot] WARNING in __i2c_transfer (2)
  • From: syzbot <syzbot+e417648b303855b91d8a@xxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [syzbot] WARNING in __i2c_transfer (2)
  • From: Pavel Skripkin <paskripkin@xxxxxxxxx>
• Re: [PATCH v2 17/17] MAINTAINERS: update riscv/microchip entry
  • From: Palmer Dabbelt <palmer@xxxxxxxxxxx>
• Re: [PATCH v3 0/8] platform/x86: introduce p2sb_bar() helper
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v3 0/8] platform/x86: introduce p2sb_bar() helper
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v3 0/8] platform/x86: introduce p2sb_bar() helper
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [RFC 1/2] i2c: designware: Add missing locks
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 17/17] MAINTAINERS: update riscv/microchip entry
  • From: <Conor.Dooley@xxxxxxxxxxxxx>
• Re: [PATCH v2 5/5] i2c: designware-pci: Switch to use i2c_new_ccgx_ucsi()
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Re: [RFC 2/2] i2c: designware: Add AMD PSP I2C bus support
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Re: [RFC 1/2] i2c: designware: Add missing locks
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Re: [RFC 0/2] i2c-designware: Add support for AMD PSP semaphore
  • From: Jan Dąbroś <jsd@xxxxxxxxxxxx>
• Re: [RFC 0/2] i2c-designware: Add support for AMD PSP semaphore
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [RFC 0/2] i2c-designware: Add support for AMD PSP semaphore
  • From: Serge Semin <fancer.lancer@xxxxxxxxx>
• [PATCH v2 1/5] i2c: Introduce common module to instantiate CCGx UCSI
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 4/5] i2c: nvidia-gpu: Convert to use dev_err_probe()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 3/5] i2c: nvidia-gpu: Use temporary variable for struct device
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 2/5] i2c: nvidia-gpu: Switch to use i2c_new_ccgx_ucsi()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 5/5] i2c: designware-pci: Switch to use i2c_new_ccgx_ucsi()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 3/3] i2c: riic: Use platform_get_irq() to get the interrupt
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [RFC 0/2] i2c-designware: Add support for AMD PSP semaphore
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 0/8] platform/x86: introduce p2sb_bar() helper
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 3/3] i2c: riic: Use platform_get_irq() to get the interrupt
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/3] i2c: sh_mobile: Use platform_get_irq_optional() to get the interrupt
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• [RFC 2/2] i2c: designware: Add AMD PSP I2C bus support
  • From: Jan Dabros <jsd@xxxxxxxxxxxx>
• [RFC 1/2] i2c: designware: Add missing locks
  • From: Jan Dabros <jsd@xxxxxxxxxxxx>
• [RFC 0/2] i2c-designware: Add support for AMD PSP semaphore
  • From: Jan Dabros <jsd@xxxxxxxxxxxx>
• Re: [PATCH v2 2/3] i2c: sh_mobile: Use platform_get_irq_optional() to get the interrupt
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v3 0/8] platform/x86: introduce p2sb_bar() helper
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH] CHROMIUM: i2c: Add device property for probing
  • From: Dmitry Torokhov <dtor@xxxxxxxxxxxx>
• Re: [PATCH v2 03/17] dt-bindings: soc/microchip: make systemcontroller a mfd
  • From: conor dooley <mail@xxxxxxxxxxx>
• Re: [PATCH] CHROMIUM: i2c: Add device property for probing
  • From: Guenter Roeck <groeck@xxxxxxxxxx>
• Re: [PATCH] CHROMIUM: i2c: Add device property for probing
  • From: Paul Menzel <pmenzel@xxxxxxxxxxxxx>
• Re: [PATCH v2 1/3] i2c: bcm2835: Use platform_get_irq() to get the interrupt
  • From: Florian Fainelli <f.fainelli@xxxxxxxxx>
• [PATCH v3 0/8] platform/x86: introduce p2sb_bar() helper
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v3 7/8] mfd: lpc_ich: Add support for pinctrl in non-ACPI system
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v3 8/8] i2c: i801: convert to use common P2SB accessor
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v3 6/8] mfd: lpc_ich: Switch to generic p2sb_bar()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v3 5/8] mfd: lpc_ich: Factor out lpc_ich_enable_spi_write()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v3 1/8] PCI: Introduce pci_bus_*() printing macros when device is not available
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v3 4/8] pinctrl: intel: Check against matching data instead of ACPI companion
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v3 2/8] PCI: Convert __pci_read_base() to __pci_bus_read_base()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v3 3/8] platform/x86/intel: Add Primary to Sideband (P2SB) bridge support
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/8] PCI: Introduce pci_bus_*() printing macros when device is not available
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 7/8] mfd: lpc_ich: Add support for pinctrl in non-ACPI system
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 1/8] PCI: Introduce pci_bus_*() printing macros when device is not available
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 2/8] PCI: Convert __pci_read_base() to __pci_bus_read_base()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 3/8] platform/x86/intel: Add Primary to Sideband (P2SB) bridge support
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 5/8] mfd: lpc_ich: Factor out lpc_ich_enable_spi_write()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 6/8] mfd: lpc_ich: Switch to generic p2sb_bar()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 8/8] i2c: i801: convert to use common P2SB accessor
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 4/8] pinctrl: intel: Check against matching data instead of ACPI companion
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 03/17] dt-bindings: soc/microchip: make systemcontroller a mfd
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v2 3/3] i2c: riic: Use platform_get_irq() to get the interrupt
  • From: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
• [PATCH v2 2/3] i2c: sh_mobile: Use platform_get_irq_optional() to get the interrupt
  • From: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
• [PATCH v2 1/3] i2c: bcm2835: Use platform_get_irq() to get the interrupt
  • From: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
• [PATCH v2 0/3] i2c/busses: Use platform_get_irq/_optional() variants to fetch IRQ's
  • From: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
• Re: [PATCH v2 01/17] dt-bindings: interrupt-controller: create a header for RISC-V interrupts
  • From: Rob Herring <robh@xxxxxxxxxx>
• [RFC Patch v3 3/3] add npcm7xx debug counters as sysfs attributes
  • From: Sui Chen <suichen@xxxxxxxxxx>
• [RFC Patch v3 2/3] i2c: npcm7xx: add tx_complete counter
  • From: Sui Chen <suichen@xxxxxxxxxx>
• [RFC Patch v3 1/3] i2c debug counters as sysfs attributes
  • From: Sui Chen <suichen@xxxxxxxxxx>
• [RFC Patch v3 0/3] I2C statistics as sysfs attributes
  • From: Sui Chen <suichen@xxxxxxxxxx>
• Re: [PATCH] CHROMIUM: i2c: Add device property for probing
  • From: Guenter Roeck <groeck@xxxxxxxxxx>
• Re: [PATCH v1 7/7] i2c: i801: convert to use common P2SB accessor
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 11/17] dt-bindings: usb: add bindings for microchip mpfs musb
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] CHROMIUM: i2c: Add device property for probing
  • From: Dmitry Torokhov <dtor@xxxxxxxxxxxx>
• [PATCH] CHROMIUM: i2c: Add device property for probing
  • From: Paul Menzel <pmenzel@xxxxxxxxxxxxx>
• [PATCH] i2c-detect: fix a typo argment -> argument
  • From: Aurelien Jarno <aurelien@xxxxxxxxxxx>
• Re: [PATCH v3] i2c: i801: Safely share SMBus with BIOS/ACPI
  • From: Alex Henrie <alexh@xxxxxxxxxxx>
• Re: [RESEND v4 10/10] dt-bindings: serial: fsl-lpuart: Add i.MX8DXL compatible
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 07/17] dt-bindings: rtc: add bindings for microchip mpfs rtc
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 2/3] i2c: sh_mobile: Use platform_get_irq_optional() to get the interrupt
  • From: "Lad, Prabhakar" <prabhakar.csengg@xxxxxxxxx>
• Re: [PATCH 2/3] i2c: sh_mobile: Use platform_get_irq_optional() to get the interrupt
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH 2/3] i2c: sh_mobile: Use platform_get_irq_optional() to get the interrupt
  • From: "Lad, Prabhakar" <prabhakar.csengg@xxxxxxxxx>
• Re: [PATCH 2/3] i2c: sh_mobile: Use platform_get_irq_optional() to get the interrupt
  • From: "Lad, Prabhakar" <prabhakar.csengg@xxxxxxxxx>
• Re: [PATCH 2/3] i2c: sh_mobile: Use platform_get_irq_optional() to get the interrupt
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxx>
• Re: [PATCH 3/3] i2c: riic: Use platform_get_irq() to get the interrupt
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH 2/3] i2c: sh_mobile: Use platform_get_irq_optional() to get the interrupt
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH 3/3] i2c: riic: Use platform_get_irq() to get the interrupt
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/3] i2c: sh_mobile: Use platform_get_irq_optional() to get the interrupt
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 10/17] dt-bindings: spi: add bindings for microchip mpfs spi
  • From: <Conor.Dooley@xxxxxxxxxxxxx>
• Re: [PATCH 1/3] i2c: bcm2835: Use platform_get_irq() to get the interrupt
  • From: Florian Fainelli <f.fainelli@xxxxxxxxx>
• Re: [PATCH 1/3] i2c: bcm2835: Use platform_get_irq() to get the interrupt
  • From: "Lad, Prabhakar" <prabhakar.csengg@xxxxxxxxx>
• Re: [PATCH 1/3] i2c: bcm2835: Use platform_get_irq() to get the interrupt
  • From: "Lad, Prabhakar" <prabhakar.csengg@xxxxxxxxx>
• Re: [RESEND v4 10/10] dt-bindings: serial: fsl-lpuart: Add i.MX8DXL compatible
  • From: Abel Vesa <abel.vesa@xxxxxxx>
• Re: [PATCH 1/3] i2c: bcm2835: Use platform_get_irq() to get the interrupt
  • From: Florian Fainelli <f.fainelli@xxxxxxxxx>
• [PATCH 3/3] i2c: riic: Use platform_get_irq() to get the interrupt
  • From: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
• [PATCH 2/3] i2c: sh_mobile: Use platform_get_irq_optional() to get the interrupt
  • From: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
• [PATCH 1/3] i2c: bcm2835: Use platform_get_irq() to get the interrupt
  • From: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
• [PATCH 0/3] i2c/busses: Use platform_get_irq/_optional() variants to fetch IRQ's
  • From: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
• Re: [PATCH v7 6/7] i2c: mediatek: Isolate speed setting via dts for special devices
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH v7 6/7] i2c: mediatek: Isolate speed setting via dts for special devices
  • From: Kewei Xu <kewei.xu@xxxxxxxxxxxx>
• Re: [External] Re: [PATCH v3] i2c: i801: Safely share SMBus with BIOS/ACPI
  • From: Hector Martin <marcan@xxxxxxxxx>
• Re: [External] Re: [PATCH v3] i2c: i801: Safely share SMBus with BIOS/ACPI
  • From: Alex Henrie <alexh@xxxxxxxxxxx>
• Re: [PATCH 4/4] dt-bindings: i2c: i2c-mux-gpio: Convert to json-schema
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 3/4] dt-bindings: i2c: aspeed: Document interrupt controller properties
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 2/4] dt-bindings: i2c: i2c-mux-pinctrl: Convert to json-schema
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 1/4] dt-bindings: i2c: tegra: Convert to json-schema
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [RESEND v4 10/10] dt-bindings: serial: fsl-lpuart: Add i.MX8DXL compatible
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH 3/4] dt-bindings: i2c: aspeed: Document interrupt controller properties
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• [PATCH 4/4] dt-bindings: i2c: i2c-mux-gpio: Convert to json-schema
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• [PATCH 2/4] dt-bindings: i2c: i2c-mux-pinctrl: Convert to json-schema
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• [PATCH v2 1/4] dt-bindings: i2c: tegra: Convert to json-schema
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• Re: [PATCH v2 06/17] dt-bindings: rng: add bindings for microchip mpfs rng
  • From: conor dooley <mail@xxxxxxxxxxx>
• Re: [PATCH v2 14/17] riscv: dts: microchip: add fpga fabric section to icicle kit
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v2 06/17] dt-bindings: rng: add bindings for microchip mpfs rng
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx>
• Re: [PATCH v2 14/17] riscv: dts: microchip: add fpga fabric section to icicle kit
  • From: <Conor.Dooley@xxxxxxxxxxxxx>
• Re: [PATCH v2 15/17] riscv: dts: microchip: refactor icicle kit device tree
  • From: <Conor.Dooley@xxxxxxxxxxxxx>
• Re: [PATCH v2 06/17] dt-bindings: rng: add bindings for microchip mpfs rng
  • From: <Conor.Dooley@xxxxxxxxxxxxx>
• Re: [PATCH v2 17/17] MAINTAINERS: update riscv/microchip entry
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx>
• Re: [PATCH v2 06/17] dt-bindings: rng: add bindings for microchip mpfs rng
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx>
• Re: [PATCH v2 15/17] riscv: dts: microchip: refactor icicle kit device tree
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx>
• Re: [PATCH v2 14/17] riscv: dts: microchip: add fpga fabric section to icicle kit
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx>
• Re: [PATCH v2 12/17] dt-bindings: pwm: add microchip corePWM binding
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx>
• Re: [PATCH v2 06/17] dt-bindings: rng: add bindings for microchip mpfs rng
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx>
• Re: [PATCH v2 09/17] dt-bindings: gpio: add bindings for microchip mpfs gpio
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 05/17] dt-bindings: i2c: add bindings for microchip mpfs i2c
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 07/17] dt-bindings: rtc: add bindings for microchip mpfs rtc
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 11/17] dt-bindings: usb: add bindings for microchip mpfs musb
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 12/17] dt-bindings: pwm: add microchip corePWM binding
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 10/17] dt-bindings: spi: add bindings for microchip mpfs spi
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 02/17] dt-bindings: soc/microchip: update syscontroller compatibles
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 14/17] riscv: dts: microchip: add fpga fabric section to icicle kit
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v2 13/17] riscv: dts: microchip: use hart and clk defines for icicle kit
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v2 04/17] mailbox: change mailbox-mpfs compatible string
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v2 02/17] dt-bindings: soc/microchip: update syscontroller compatibles
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v2 10/17] dt-bindings: spi: add bindings for microchip mpfs spi
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v2 10/17] dt-bindings: spi: add bindings for microchip mpfs spi
  • From: <Conor.Dooley@xxxxxxxxxxxxx>
• Re: [PATCH 4/6] i2c: designware-pci: Group MODULE_*() macros
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 10/17] dt-bindings: spi: add bindings for microchip mpfs spi
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v2 00/17] Update the Icicle Kit device tree
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• [PATCH v2 17/17] MAINTAINERS: update riscv/microchip entry
  • From: <conor.dooley@xxxxxxxxxxxxx>
• [PATCH v2 16/17] riscv: dts: microchip: update peripherals in icicle kit device tree
  • From: <conor.dooley@xxxxxxxxxxxxx>
• [PATCH v2 15/17] riscv: dts: microchip: refactor icicle kit device tree
  • From: <conor.dooley@xxxxxxxxxxxxx>
• [PATCH v2 14/17] riscv: dts: microchip: add fpga fabric section to icicle kit
  • From: <conor.dooley@xxxxxxxxxxxxx>
• [PATCH v2 13/17] riscv: dts: microchip: use hart and clk defines for icicle kit
  • From: <conor.dooley@xxxxxxxxxxxxx>
• [PATCH v2 12/17] dt-bindings: pwm: add microchip corePWM binding
  • From: <conor.dooley@xxxxxxxxxxxxx>
• [PATCH v2 11/17] dt-bindings: usb: add bindings for microchip mpfs musb
  • From: <conor.dooley@xxxxxxxxxxxxx>
• [PATCH v2 10/17] dt-bindings: spi: add bindings for microchip mpfs spi
  • From: <conor.dooley@xxxxxxxxxxxxx>
• [PATCH v2 08/17] dt-bindings: soc/microchip: add bindings for mpfs system services
  • From: <conor.dooley@xxxxxxxxxxxxx>
• [PATCH v2 09/17] dt-bindings: gpio: add bindings for microchip mpfs gpio
  • From: <conor.dooley@xxxxxxxxxxxxx>
• [PATCH v2 07/17] dt-bindings: rtc: add bindings for microchip mpfs rtc
  • From: <conor.dooley@xxxxxxxxxxxxx>
• [PATCH v2 05/17] dt-bindings: i2c: add bindings for microchip mpfs i2c
  • From: <conor.dooley@xxxxxxxxxxxxx>
• [PATCH v2 06/17] dt-bindings: rng: add bindings for microchip mpfs rng
  • From: <conor.dooley@xxxxxxxxxxxxx>
• [PATCH v2 04/17] mailbox: change mailbox-mpfs compatible string
  • From: <conor.dooley@xxxxxxxxxxxxx>
• [PATCH v2 03/17] dt-bindings: soc/microchip: make systemcontroller a mfd
  • From: <conor.dooley@xxxxxxxxxxxxx>
• [PATCH v2 02/17] dt-bindings: soc/microchip: update syscontroller compatibles
  • From: <conor.dooley@xxxxxxxxxxxxx>
• [PATCH v2 01/17] dt-bindings: interrupt-controller: create a header for RISC-V interrupts
  • From: <conor.dooley@xxxxxxxxxxxxx>
• [PATCH v2 00/17] Update the Icicle Kit device tree
  • From: <conor.dooley@xxxxxxxxxxxxx>
• Re: [PATCH v3] i2c: i801: Safely share SMBus with BIOS/ACPI
  • From: Hector Martin <marcan@xxxxxxxxx>
• RE: [PATCH 2/2] i2c: smbus: Use device_ functions instead of of_
  • From: Akhil R <akhilrajeev@xxxxxxxxxx>
• Re: [PATCH v3] i2c: i801: Safely share SMBus with BIOS/ACPI
  • From: Alex Henrie <alexh@xxxxxxxxxxx>
• Re: [PATCH] i2c: exynos5: Fix getting the optional clock
  • From: Sam Protsenko <semen.protsenko@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: i2c: aspeed: Drop stray '#interrupt-cells'
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH] i2c: aspeed: Remove unused includes
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH 2/2] i2c: sh_mobile: update to new DMAENGINE API when terminating
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] i2c: rcar: update to new DMAENGINE API when terminating
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: exynos5: Fix getting the optional clock
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH 6/6] i2c: designware-pci: Convert to use dev_err_probe()
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH 5/6] i2c: designware-pci: use __maybe_unused for PM functions
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH 4/6] i2c: designware-pci: Group MODULE_*() macros
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH 3/6] i2c: designware-pci: Add a note about struct dw_scl_sda_cfg usage
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH 2/6] i2c: designware-pci: Fix to change data types of hcnt and lcnt parameters
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH 1/6] i2c: designware: Do not complete i2c read without RX_FULL interrupt
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH 2/2] i2c: smbus: Use device_ functions instead of of_
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [RESEND v4 05/10] arm64: dts: freescale: Add the imx8dxl connectivity subsys dtsi
  • From: Abel Vesa <abel.vesa@xxxxxxx>
• [RESEND v4 06/10] arm64: dts: freescale: Add ddr subsys dtsi for imx8dxl
  • From: Abel Vesa <abel.vesa@xxxxxxx>
• [RESEND v4 10/10] dt-bindings: serial: fsl-lpuart: Add i.MX8DXL compatible
  • From: Abel Vesa <abel.vesa@xxxxxxx>
• [RESEND v4 09/10] dt-bindings: fsl: scu: Add i.MX8DXL ocotp binding
  • From: Abel Vesa <abel.vesa@xxxxxxx>
• [RESEND v4 08/10] arm64: dts: imx8dxl: Add i.MX8DXL evk board support
  • From: Abel Vesa <abel.vesa@xxxxxxx>
• [RESEND v4 07/10] arm64: dts: freescale: Add lsio subsys dtsi for imx8dxl
  • From: Abel Vesa <abel.vesa@xxxxxxx>
• [RESEND v4 04/10] arm64: dts: freescale: Add adma subsystem dtsi for imx8dxl
  • From: Abel Vesa <abel.vesa@xxxxxxx>
• [RESEND v4 03/10] arm64: dts: imx8-ss-lsio: Add mu5a mailbox
  • From: Abel Vesa <abel.vesa@xxxxxxx>
• [RESEND v4 02/10] arm64: dts: freescale: Add the top level dtsi support for imx8dxl
  • From: Abel Vesa <abel.vesa@xxxxxxx>
• [RESEND v4 01/10] dt-bindings: serial: fsl-lpuart: Fix i.MX 8QM compatible matching
  • From: Abel Vesa <abel.vesa@xxxxxxx>
• [RESEND v4 00/10] arm64: dts: Add i.MX8DXL initial support
  • From: Abel Vesa <abel.vesa@xxxxxxx>
• RE: [PATCH 2/2] i2c: smbus: Use device_ functions instead of of_
  • From: Akhil R <akhilrajeev@xxxxxxxxxx>
• Re: [PATCH 2/2] i2c: smbus: Use device_ functions instead of of_
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 1/2] device property: Add device_irq_get_byname
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH 2/2] i2c: smbus: Use device_ functions instead of of_
  • From: Akhil R <akhilrajeev@xxxxxxxxxx>
• [PATCH 1/2] device property: Add device_irq_get_byname
  • From: Akhil R <akhilrajeev@xxxxxxxxxx>
• [PATCH 0/2] Enable named interrupt smbus-alert for ACPI as well
  • From: Akhil R <akhilrajeev@xxxxxxxxxx>
• Re: [PATCH 1/4] dt-bindings: i2c Update PCA954x
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH 1/4] dt-bindings: i2c Update PCA954x
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 0/2] Add SMBus features to Tegra I2C
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: i2c: tegra: Add SMBus feature properties
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH 6/6] i2c: designware-pci: Convert to use dev_err_probe()
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• [PATCH 5/6] i2c: designware-pci: use __maybe_unused for PM functions
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• [PATCH 4/6] i2c: designware-pci: Group MODULE_*() macros
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• [PATCH 3/6] i2c: designware-pci: Add a note about struct dw_scl_sda_cfg usage
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• [PATCH 2/6] i2c: designware-pci: Fix to change data types of hcnt and lcnt parameters
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• [PATCH 1/6] i2c: designware: Do not complete i2c read without RX_FULL interrupt
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 4/6] i2c: designware-pci: Fix to change data types of hcnt and lcnt parameters
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/4] dt-bindings: i2c Update PCA954x
  • From: Patrick Rudolph <patrick.rudolph@xxxxxxxxxxxxx>
• Re: [PATCH v2 1/6] i2c: designware-pci: Use temporary variable for struct device
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/6] i2c: designware-pci: Use temporary variable for struct device
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 4/6] i2c: designware-pci: Fix to change data types of hcnt and lcnt parameters
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v1 01/11] i2c: Introduce common module to instantiate CCGx UCSI
  • From: "Shah, Nehal-bakulchandra" <nehal-bakulchandra.shah@xxxxxxx>
• Re: [PATCH v2 1/6] i2c: designware-pci: Use temporary variable for struct device
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/4] dt-bindings: i2c Update PCA954x
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH v3] i2c: designware: Do not complete i2c read without RX_FULL interrupt
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• [PATCH] Fix typo, add markup, fix URL in i2c-piix4 docs
  • From: Bruce Duncan <bwduncan@xxxxxxxxx>
• Re: [PATCH v2 4/6] i2c: designware-pci: Fix to change data types of hcnt and lcnt parameters
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/6] i2c: designware-pci: Use temporary variable for struct device
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 0/2] Add Microchip EEPROM 24xx1025 support.
  • From: Maxim Kochetkov <fido_max@xxxxxxxx>
• [PATCH v3] i2c: designware: Do not complete i2c read without RX_FULL interrupt
  • From: tamal.saha@xxxxxxxxx
• Re: [PATCH 4/4] i2c-mux-pca954x: Add regulator support
  • From: kernel test robot <lkp@xxxxxxxxx>
• RE: [PATCH v2] i2c: designware: Do not complete i2c read without RX_FULL interrupt
  • From: "Saha, Tamal" <tamal.saha@xxxxxxxxx>
• Re: [PATCH v2] i2c: designware: Do not complete i2c read without RX_FULL interrupt
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v2] i2c: designware: Do not complete i2c read without RX_FULL interrupt
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 3/4] dt-bindings: i2c Add regulator to pca954x
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH 1/4] dt-bindings: i2c Update PCA954x
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• [PATCH 4/4] i2c-mux-pca954x: Add regulator support
  • From: Patrick Rudolph <patrick.rudolph@xxxxxxxxxxxxx>
• [PATCH 3/4] dt-bindings: i2c Add regulator to pca954x
  • From: Patrick Rudolph <patrick.rudolph@xxxxxxxxxxxxx>
• [PATCH 2/4] drivers/i2c/mux: Add MAX735x support to PCA954x
  • From: Patrick Rudolph <patrick.rudolph@xxxxxxxxxxxxx>
• [PATCH 1/4] dt-bindings: i2c Update PCA954x
  • From: Patrick Rudolph <patrick.rudolph@xxxxxxxxxxxxx>
• [PATCH v2] i2c: designware: Do not complete i2c read without RX_FULL interrupt
  • From: tamal.saha@xxxxxxxxx
• RE: [PATCH v1] i2c: designware: Do not complete i2c read without RX_FULL interrupt
  • From: "Saha, Tamal" <tamal.saha@xxxxxxxxx>
• Re: [PATCH] i2c: aspeed: Remove unused includes
  • From: Joel Stanley <joel@xxxxxxxxx>
• [PATCH] i2c: i801: enable FEATURE_IRQ and FEATURE_I2C_BLOCK_READ on all chip versions
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• Re: [PATCH v1 01/11] i2c: Introduce common module to instantiate CCGx UCSI
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 5/6] i2c: designware-pci: Group MODULE_*() macros
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 6/6] i2c: designware-pci: Add a note about struct dw_scl_sda_cfg usage
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 1/6] i2c: designware-pci: Use temporary variable for struct device
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 4/6] i2c: designware-pci: Fix to change data types of hcnt and lcnt parameters
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 2/6] i2c: designware-pci: Convert to use dev_err_probe()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 3/6] i2c: designware-pci: use __maybe_unused for PM functions
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: piix4: Replace piix4_smbus driver's cd6h/cd7h port io accesses with mmio accesses
  • From: Terry Bowman <Terry.Bowman@xxxxxxx>
• Re: [PATCH v3 0/2] Add Microchip EEPROM 24xx1025 support.
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH v1] i2c: designware: Do not complete i2c read without RX_FULL interrupt
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• RE: [PATCH] i2c: exynos5: Fix getting the optional clock
  • From: "Chanho Park" <chanho61.park@xxxxxxxxxxx>
• Re: [PATCH] i2c: exynos5: Fix getting the optional clock
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx>
• [PATCH] i2c: exynos5: Fix getting the optional clock
  • From: Sam Protsenko <semen.protsenko@xxxxxxxxxx>
• Re: [bisected][regression] Applications that need amdgpu doesn't run after waking up from suspend
  • From: Thorsten Leemhuis <regressions@xxxxxxxxxxxxx>
• Re: i801: I2C block read should be usable also on ICH/ICH0/ICH2/ICH3/ICH4
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• Re: [PATCH 2/2] i2c: tegra: Add SMBus block read and SMBus alert functions
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• Re: [PATCH 2/2] i2c: tegra: Add SMBus block read and SMBus alert functions
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• Re: [PULL REQUEST] i2c for v5.16
  • From: pr-tracker-bot@xxxxxxxxxx
• Re: [PATCH v3] i2c: tegra: use i2c_timings for bus clock freq
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• Wrong piix4_smbus address / slow trackpoint on Thinkpad P14s gen 2 (AMD)
  • From: Miroslav Bendik <miroslav.bendik@xxxxxxxxx>
• [PULL REQUEST] i2c for v5.16
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• [PATCH v1] i2c: designware: Do not complete i2c read without RX_FULL interrupt
  • From: tamal.saha@xxxxxxxxx
• Re: [PATCH v3] i2c: tegra: use i2c_timings for bus clock freq
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v3] i2c: tegra: use i2c_timings for bus clock freq
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH v3 2/2] dt-bindings: at24: add at24c1025
  • From: Maxim Kochetkov <fido_max@xxxxxxxx>
• [PATCH v3 1/2] eeprom: at24: Add support for 24c1025 EEPROM
  • From: Maxim Kochetkov <fido_max@xxxxxxxx>
• [PATCH v3 0/2] Add Microchip EEPROM 24xx1025 support.
  • From: Maxim Kochetkov <fido_max@xxxxxxxx>
• Re: [PATCH v3] i2c: tegra: use i2c_timings for bus clock freq
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• Re: [PATCH] dt-bindings: at24: Rework special case compatible handling
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH v2] eeprom: at24: Add support for 24c1025 EEPROM
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v3] i2c: tegra: use i2c_timings for bus clock freq
  • From: Akhil R <akhilrajeev@xxxxxxxxxx>
• RE: [PATCH 2/2] i2c: tegra: Add SMBus block read and SMBus alert functions
  • From: Akhil R <akhilrajeev@xxxxxxxxxx>
• Re: [PATCH 0/2] Add SMBus features to Tegra I2C
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• Re: [PATCH v2] i2c: tegra: use i2c_timings for bus clock freq
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• RE: [PATCH v2] i2c: tegra: use i2c_timings for bus clock freq
  • From: Akhil R <akhilrajeev@xxxxxxxxxx>
• Re: [PATCH] drivers/i2c/busses/i2c-imx.c: Use with resource management to register interrupts
  • From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
• [PATCH] drivers/i2c/busses/i2c-imx.c: Use with resource management to register interrupts
  • From: lizhe <sensor1010@xxxxxxx>
• Re: [PATCH v2] i2c: tegra: use i2c_timings for bus clock freq
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• Re: [bisected][regression] Applications that need amdgpu doesn't run after waking up from suspend
  • From: "wsa@xxxxxxxxxx" <wsa@xxxxxxxxxx>
• Re: [PATCH] i2c: mpc: Use atomic read and fix break condition
  • From: Chris Packham <Chris.Packham@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 RESEND 6/8] i2c: exynos5: Mention Exynos850 and ExynosAutoV9 in Kconfig
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v2 RESEND 7/8] arm: dts: exynos: Rename hsi2c nodes to i2c for Exynos5260
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v2 RESEND 7/8] arm: dts: exynos: Rename hsi2c nodes to i2c for Exynos5260
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx>
• [PATCH v2] i2c: tegra: use i2c_timings for bus clock freq
  • From: Akhil R <akhilrajeev@xxxxxxxxxx>
• Re: [PATCH 0/2] Add SMBus features to Tegra I2C
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• Re: [PATCH 2/2] i2c: tegra: Add SMBus block read and SMBus alert functions
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• Re: [PATCH 2/2] i2c: tegra: Add SMBus block read and SMBus alert functions
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• Re: [PATCH 2/2] i2c: tegra: Add SMBus block read and SMBus alert functions
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: i2c: tegra: Add SMBus feature properties
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 2/2] i2c: tegra: Add SMBus block read and SMBus alert functions
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• Re: [PATCH] i2c: tegra: use i2c_timings for bus clock freq
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 2/2] i2c: tegra: Add SMBus block read and SMBus alert functions
  • From: Dmitry Osipenko <digetx@xxxxxxxxx>
• Re: [PATCH v2 RESEND 7/8] arm: dts: exynos: Rename hsi2c nodes to i2c for Exynos5260
  • From: Sam Protsenko <semen.protsenko@xxxxxxxxxx>
• [PATCH 2/2] i2c: tegra: Add SMBus block read and SMBus alert functions
  • From: Akhil R <akhilrajeev@xxxxxxxxxx>
• [PATCH 1/2] dt-bindings: i2c: tegra: Add SMBus feature properties
  • From: Akhil R <akhilrajeev@xxxxxxxxxx>
• [PATCH 0/2] Add SMBus features to Tegra I2C
  • From: Akhil R <akhilrajeev@xxxxxxxxxx>
• Re: [PATCH v3] i2c: i801: Don't clear status flags twice in interrupt mode
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH] i2c: i801: Don't read back cleared status in i801_check_pre()
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v3] i2c: exynos5: Add bus clock support
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v2 RESEND 7/8] arm: dts: exynos: Rename hsi2c nodes to i2c for Exynos5260
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v2 RESEND 6/8] i2c: exynos5: Mention Exynos850 and ExynosAutoV9 in Kconfig
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v2 RESEND 5/8] i2c: exynos5: Add bus clock support
  • From: Sam Protsenko <semen.protsenko@xxxxxxxxxx>
• [PATCH v3] i2c: exynos5: Add bus clock support
  • From: Sam Protsenko <semen.protsenko@xxxxxxxxxx>
• [PATCH] i2c: tegra: use i2c_timings for bus clock freq
  • From: Akhil R <akhilrajeev@xxxxxxxxxx>
• Re: [PATCH v2 RESEND 6/8] i2c: exynos5: Mention Exynos850 and ExynosAutoV9 in Kconfig
  • From: Sam Protsenko <semen.protsenko@xxxxxxxxxx>
• Re: [PATCH v3] i2c: i801: Don't clear status flags twice in interrupt mode
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH] i2c: i801: Don't read back cleared status in i801_check_pre()
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH v1 1/1] i2c: core: Do not dereference fwnode in struct device
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: mpc: Use atomic read and fix break condition
  • From: "wsa@xxxxxxxxxx" <wsa@xxxxxxxxxx>
• Re: [PATCH] i2c: i801: Don't read back cleared status in i801_check_pre()
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v2 RESEND 5/8] i2c: exynos5: Add bus clock support
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v2 RESEND 4/8] i2c: exynos5: Add support for ExynosAutoV9 SoC
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v2 RESEND 3/8] dt-bindings: i2c: exynos5: Add bus clock
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v2 RESEND 2/8] dt-bindings: i2c: exynos5: Add exynosautov9-hsi2c compatible
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v2 RESEND 1/8] dt-bindings: i2c: exynos5: Convert to dtschema
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: i2c: brcm,bcm2835-i2c: convert to YAML schema
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v3] i2c: virtio: fix completion handling
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v1 1/1] i2c: core: Do not dereference fwnode in struct device
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3] i2c: virtio: fix completion handling
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v3] i2c: virtio: fix completion handling
  • From: "Michael S. Tsirkin" <mst@xxxxxxxxxx>
• Re: [PATCH v1 3/7] PCI: New Primary to Sideband (P2SB) bridge support library
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [syzbot] WARNING in __i2c_transfer (2)
  • From: syzbot <syzbot+e417648b303855b91d8a@xxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v1 03/11] i2c: designware-pci: Use temporary variable for struct device
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH v1 05/11] i2c: designware-pci: use __maybe_unused for PM functions
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH v1 07/11] i2c: designware-pci: Group MODULE_*() macros
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH v1 08/11] i2c: designware-pci: Add a note about struct dw_scl_sda_cfg usage
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH v1 06/11] i2c: designware-pci: Fix to change data types of hcnt and lcnt parameters
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH v1 01/11] i2c: Introduce common module to instantiate CCGx UCSI
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH v1 04/11] i2c: designware-pci: Convert to use dev_err_probe()
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• [PATCH] dt-bindings: at24: Rework special case compatible handling
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• [PATCH 2/2] i2c: sh_mobile: update to new DMAENGINE API when terminating
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• [PATCH 1/2] i2c: rcar: update to new DMAENGINE API when terminating
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: mpc: Use atomic read and fix break condition
  • From: Chris Packham <Chris.Packham@xxxxxxxxxxxxxxxxxxx>
• Re: [syzbot] WARNING in __i2c_transfer (2)
  • From: syzbot <syzbot+e417648b303855b91d8a@xxxxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH v1 08/11] i2c: designware-pci: Add a note about struct dw_scl_sda_cfg usage
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 07/11] i2c: designware-pci: Group MODULE_*() macros
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 06/11] i2c: designware-pci: Fix to change data types of hcnt and lcnt parameters
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 05/11] i2c: designware-pci: use __maybe_unused for PM functions
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 02/11] i2c: designware-pci: Switch to use i2c_new_ccgx_ucsi()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 09/11] i2c: nvidia-gpu: Switch to use i2c_new_ccgx_ucsi()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 11/11] i2c: nvidia-gpu: Convert to use dev_err_probe()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 10/11] i2c: nvidia-gpu: Use temporary variable for struct device
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 04/11] i2c: designware-pci: Convert to use dev_err_probe()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 01/11] i2c: Introduce common module to instantiate CCGx UCSI
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 03/11] i2c: designware-pci: Use temporary variable for struct device
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v1 1/1] i2c: designware: Add a note about struct dw_scl_sda_cfg usage
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 1/1] i2c: core: Do not dereference fwnode in struct device
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [RFC Patch v2 0/3] I2C statistics as sysfs attributes
  • From: Sui Chen <suichen@xxxxxxxxxx>
• [PATCH] i2c: aspeed: Remove unused includes
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• Re: [PATCH] i2c: i801: Don't read back cleared status in i801_check_pre()
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH] i2c: mpc: Use atomic read and fix break condition
  • From: Maxime Bizon <mbizon@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: i2c: aspeed: Drop stray '#interrupt-cells'
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• Re: [PATCH] dt-bindings: i2c: brcm,bcm2835-i2c: convert to YAML schema
  • From: David Heidelberg <david@xxxxxxx>
• Re: [PATCH v2] eeprom: at24: Add support for 24c1025 EEPROM
  • From: Maxim Kochetkov <fido_max@xxxxxxxx>
• [PATCH] i2c: mpc: Use atomic read and fix break condition
  • From: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: i2c: brcm,bcm2835-i2c: convert to YAML schema
  • From: Florian Fainelli <f.fainelli@xxxxxxxxx>
• [PATCH AUTOSEL 4.9 3/5] i2c: rk3x: Handle a spurious start completion interrupt flag
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.4 2/3] i2c: rk3x: Handle a spurious start completion interrupt flag
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 4/6] i2c: rk3x: Handle a spurious start completion interrupt flag
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 5/7] i2c: rk3x: Handle a spurious start completion interrupt flag
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• i801: I2C block read should be usable also on ICH/ICH0/ICH2/ICH3/ICH4
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH AUTOSEL 5.4 06/10] i2c: rk3x: Handle a spurious start completion interrupt flag
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.10 11/15] i2c: rk3x: Handle a spurious start completion interrupt flag
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.15 15/24] i2c: rk3x: Handle a spurious start completion interrupt flag
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• Re: [PATCH v2 RESEND 2/8] dt-bindings: i2c: exynos5: Add exynosautov9-hsi2c compatible
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: powerpc64-linux-ld: drivers/i2c/busses/i2c-pasemi-core.o:undefined reference to `__this_module'
  • From: "Sven Peter" <sven@xxxxxxxxxxxxx>
• Re: powerpc64-linux-ld: drivers/i2c/busses/i2c-pasemi-core.o:undefined reference to `__this_module'
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• [PATCH] dt-bindings: i2c: brcm,bcm2835-i2c: convert to YAML schema
  • From: David Heidelberg <david@xxxxxxx>
• [PATCH] dt-bindings: i2c: aspeed: Drop stray '#interrupt-cells'
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: powerpc64-linux-ld: drivers/i2c/busses/i2c-pasemi-core.o:undefined reference to `__this_module'
  • From: "Sven Peter" <sven@xxxxxxxxxxxxx>
• Re: (subset) [PATCH v2 RESEND 8/8] arm64: dts: exynos: Rename hsi2c nodes to i2c for Exynos5433 and Exynos7
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx>
• Re: (subset) [PATCH v2 RESEND 7/8] arm: dts: exynos: Rename hsi2c nodes to i2c for Exynos5260
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx>
• Re: [PATCH v2 RESEND 3/8] dt-bindings: i2c: exynos5: Add bus clock
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx>
• Re: [PATCH V6 7/7] arm64: dts: imx8ulp: Add the basic dts for imx8ulp evk board
  • From: Shawn Guo <shawnguo@xxxxxxxxxx>
• Re: [PATCH V6 6/7] arm64: dts: imx8ulp: Add the basic dtsi file for imx8ulp
  • From: Shawn Guo <shawnguo@xxxxxxxxxx>
• Re: [PATCH V6 5/7] dt-bindings: arm: fsl: Add binding for imx8ulp evk
  • From: Shawn Guo <shawnguo@xxxxxxxxxx>
• Re: [PATCH V6 6/7] arm64: dts: imx8ulp: Add the basic dtsi file for imx8ulp
  • From: Shawn Guo <shawnguo@xxxxxxxxxx>
• RE: [PATCH V6 6/7] arm64: dts: imx8ulp: Add the basic dtsi file for imx8ulp
  • From: Peng Fan <peng.fan@xxxxxxx>
• Re: [PATCH V6 6/7] arm64: dts: imx8ulp: Add the basic dtsi file for imx8ulp
  • From: Shawn Guo <shawnguo@xxxxxxxxxx>
• [PATCH] i2c: Fix syntax errors in comments
  • From: Xiang wangx <wangxiang@xxxxxxxxxx>
• [PATCH] i2c: i801: make FEATURE_BLOCK_PROC dependent on FEATURE_BLOCK_BUFFER
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH] i2c: i801: make FEATURE_HOST_NOTIFY dependent on FEATURE_IRQ
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH] i2c: i801: improve interrupt handler
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH v2 RESEND 3/8] dt-bindings: i2c: exynos5: Add bus clock
  • From: Sam Protsenko <semen.protsenko@xxxxxxxxxx>
• [PATCH v2 RESEND 8/8] arm64: dts: exynos: Rename hsi2c nodes to i2c for Exynos5433 and Exynos7
  • From: Sam Protsenko <semen.protsenko@xxxxxxxxxx>
• [PATCH v2 RESEND 4/8] i2c: exynos5: Add support for ExynosAutoV9 SoC
  • From: Sam Protsenko <semen.protsenko@xxxxxxxxxx>
• [PATCH v2 RESEND 7/8] arm: dts: exynos: Rename hsi2c nodes to i2c for Exynos5260
  • From: Sam Protsenko <semen.protsenko@xxxxxxxxxx>
• [PATCH v2 RESEND 6/8] i2c: exynos5: Mention Exynos850 and ExynosAutoV9 in Kconfig
  • From: Sam Protsenko <semen.protsenko@xxxxxxxxxx>
• [PATCH v2 RESEND 5/8] i2c: exynos5: Add bus clock support
  • From: Sam Protsenko <semen.protsenko@xxxxxxxxxx>
• [PATCH v2 RESEND 2/8] dt-bindings: i2c: exynos5: Add exynosautov9-hsi2c compatible
  • From: Sam Protsenko <semen.protsenko@xxxxxxxxxx>
• [PATCH v2 RESEND 1/8] dt-bindings: i2c: exynos5: Convert to dtschema
  • From: Sam Protsenko <semen.protsenko@xxxxxxxxxx>
• [PATCH v2 RESEND 0/8] i2c: exynos5: Add support for modern Exynos SoCs
  • From: Sam Protsenko <semen.protsenko@xxxxxxxxxx>
• Re: From a5f512cb01e48f5bfcdef800dd477c8b04a4cacf Mon Sep 17 00:00:00 2001
  • From: Sam Protsenko <semen.protsenko@xxxxxxxxxx>
• [PATCH v2 7/8] arm: dts: exynos: Rename hsi2c nodes to i2c for Exynos5260
  • From: Sam Protsenko <semen.protsenko@xxxxxxxxxx>
• [PATCH v2 5/8] i2c: exynos5: Add bus clock support
  • From: Sam Protsenko <semen.protsenko@xxxxxxxxxx>
• [PATCH v2 8/8] arm64: dts: exynos: Rename hsi2c nodes to i2c for Exynos5433 and Exynos7
  • From: Sam Protsenko <semen.protsenko@xxxxxxxxxx>
• [PATCH v2 6/8] i2c: exynos5: Mention Exynos850 and ExynosAutoV9 in Kconfig
  • From: Sam Protsenko <semen.protsenko@xxxxxxxxxx>
• [PATCH v2 4/8] i2c: exynos5: Add support for ExynosAutoV9 SoC
  • From: Sam Protsenko <semen.protsenko@xxxxxxxxxx>
• [PATCH v2 3/8] dt-bindings: i2c: exynos5: Add bus clock
  • From: Sam Protsenko <semen.protsenko@xxxxxxxxxx>
• [PATCH v2 2/8] dt-bindings: i2c: exynos5: Add exynosautov9-hsi2c compatible
  • From: Sam Protsenko <semen.protsenko@xxxxxxxxxx>
• [PATCH v2 1/8] dt-bindings: i2c: exynos5: Convert to dtschema
  • From: Sam Protsenko <semen.protsenko@xxxxxxxxxx>
• From a5f512cb01e48f5bfcdef800dd477c8b04a4cacf Mon Sep 17 00:00:00 2001
  • From: Sam Protsenko <semen.protsenko@xxxxxxxxxx>
• [PATCH v3] i2c: i801: Don't clear status flags twice in interrupt mode
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH v2] eeprom: at24: Add support for 24c1025 EEPROM
  • From: Maxim Kochetkov <fido_max@xxxxxxxx>
• [PATCH v2] i2c: i801: Don't clear status flags twice in interrupt mode
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• Re: [PATCH] i2c: i801: Don't read back cleared status in i801_check_pre()
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• Re: [PULL REQUEST] i2c for v5.16
  • From: pr-tracker-bot@xxxxxxxxxx
• [PATCH v1 1/1] i2c: designware: Add a note about struct dw_scl_sda_cfg usage
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PULL REQUEST] i2c for v5.16
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [RFC Patch v2 0/3] I2C statistics as sysfs attributes
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH] i2c: i801: Don't clear status flags twice in interrupt mode
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• Re: [PATCH] i2c: i801: Don't read back cleared status in i801_check_pre()
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• Re: [PATCH] eeprom: at24: Add support for 24c1025 EEPROM
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH] i2c: i801: Don't clear status flags twice in interrupt mode
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH v6 07/15] platform/x86: int3472: Enable I2c daisy chain
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH] i2c: i801: Don't read back cleared status in i801_check_pre()
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH AUTOSEL 5.15 35/68] i2c: i801: Fix interrupt storm from SMB_ALERT signal
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [RFC Patch v2 1/3] i2c debug counters as sysfs attributes
  • From: Joe Perches <joe@xxxxxxxxxxx>
• Re: [RFC Patch v2 1/3] i2c debug counters as sysfs attributes
  • From: Sui Chen <suichen@xxxxxxxxxx>
• Re: [PATCH v3] i2c: virtio: fix completion handling
  • From: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
• Re: [RFC Patch v2 1/3] i2c debug counters as sysfs attributes
  • From: Joe Perches <joe@xxxxxxxxxxx>
• [RFC Patch v2 3/3] add npcm7xx debug counters as sysfs attributes
  • From: Sui Chen <suichen@xxxxxxxxxx>
• [RFC Patch v2 2/3] i2c: npcm7xx: add tx_complete counter
  • From: Sui Chen <suichen@xxxxxxxxxx>
• [RFC Patch v2 1/3] i2c debug counters as sysfs attributes
  • From: Sui Chen <suichen@xxxxxxxxxx>
• [RFC Patch v2 0/3] I2C statistics as sysfs attributes
  • From: Sui Chen <suichen@xxxxxxxxxx>
• pca954x devices sharing reset-gpios
  • From: Chris Packham <Chris.Packham@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] i2c: virtio: fix completion handling
  • From: Vincent Whitchurch <vincent.whitchurch@xxxxxxxx>
• [PATCH v3] i2c: virtio: fix completion handling
  • From: Vincent Whitchurch <vincent.whitchurch@xxxxxxxx>
• RE: [PATCH 5/6] i2c: exynos5: Add bus clock support
  • From: "Chanho Park" <chanho61.park@xxxxxxxxxxx>
• [PATCH] i2c: i801: Don't clear status flags twice in interrupt mode
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH] i2c: i801: Don't read back cleared status in i801_check_pre()
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• RE: [PATCH 6/6] i2c: exynos5: Mention Exynos850 and ExynosAutoV9 in Kconfig
  • From: "Chanho Park" <chanho61.park@xxxxxxxxxxx>
• Re: [PATCH 6/6] i2c: exynos5: Mention Exynos850 and ExynosAutoV9 in Kconfig
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx>
• Re: [PATCH 4/6] i2c: exynos5: Add support for ExynosAutoV9 SoC
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx>
• Re: [PATCH 5/6] i2c: exynos5: Add bus clock support
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx>
• Re: [PATCH 3/6] dt-bindings: i2c: exynos5: Add bus clock
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx>
• Re: [PATCH 2/6] dt-bindings: i2c: exynos5: Add exynosautov9-hsi2c compatible
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx>
• Re: [PATCH 1/6] dt-bindings: i2c: exynos5: Convert to dtschema
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx>
• Re: [PATCH] eeprom: at24: Add support for 24c1025 EEPROM
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• [PATCH 4/6] i2c: exynos5: Add support for ExynosAutoV9 SoC
  • From: Sam Protsenko <semen.protsenko@xxxxxxxxxx>
• [PATCH 5/6] i2c: exynos5: Add bus clock support
  • From: Sam Protsenko <semen.protsenko@xxxxxxxxxx>
• [PATCH 6/6] i2c: exynos5: Mention Exynos850 and ExynosAutoV9 in Kconfig
  • From: Sam Protsenko <semen.protsenko@xxxxxxxxxx>
• [PATCH 3/6] dt-bindings: i2c: exynos5: Add bus clock
  • From: Sam Protsenko <semen.protsenko@xxxxxxxxxx>
• [PATCH 2/6] dt-bindings: i2c: exynos5: Add exynosautov9-hsi2c compatible
  • From: Sam Protsenko <semen.protsenko@xxxxxxxxxx>
• [PATCH 1/6] dt-bindings: i2c: exynos5: Convert to dtschema
  • From: Sam Protsenko <semen.protsenko@xxxxxxxxxx>
• [PATCH 0/6] i2c: exynos5: Add support for modern Exynos SoCs
  • From: Sam Protsenko <semen.protsenko@xxxxxxxxxx>
• Re: [PATCH 0/2] i2c: stm32: A few cleanups
  • From: Alain Volmat <alain.volmat@xxxxxxxxxxx>
• Re: [PATCH] eeprom: at24: remove struct at24_client
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v2 2/2] i2c: stm32f7: remove noisy and imprecise log messages
  • From: Alain Volmat <alain.volmat@xxxxxxxxxxx>
• [PATCH 1/2] i2c: stm32: get rid of stm32f7_i2c_release_bus return value
  • From: Alain Volmat <alain.volmat@xxxxxxxxxxx>
• [PATCH 0/2] i2c: stm32: A few cleanups
  • From: Alain Volmat <alain.volmat@xxxxxxxxxxx>
• Re: [PATCH v1 1/2] i2c: designware-pci: Add support for Fast Mode Plus and High Speed Mode
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: stm32f7: remove noisy and imprecise log messages
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH] i2c: stm32f7: remove noisy and imprecise log messages
  • From: Alain Volmat <alain.volmat@xxxxxxxxxxx>
• RE: [PATCH v1 1/2] i2c: designware-pci: Add support for Fast Mode Plus and High Speed Mode
  • From: "D, Lakshmi Sowjanya" <lakshmi.sowjanya.d@xxxxxxxxx>
• Re: [PATCH v1 1/2] i2c: designware-pci: Add support for Fast Mode Plus and High Speed Mode
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v1 1/2] i2c: designware-pci: Add support for Fast Mode Plus and High Speed Mode
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• RE: [PATCH v1 1/2] i2c: designware-pci: Add support for Fast Mode Plus and High Speed Mode
  • From: "D, Lakshmi Sowjanya" <lakshmi.sowjanya.d@xxxxxxxxx>
• Re: [PATCH] i2c: stm32f7: remove noisy and imprecise log messages
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [RESEND PATCH] i2c: rk3x: Handle a spurious start completion interrupt flag
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [RESEND PATCH] i2c: rk3x: Handle a spurious start completion interrupt flag
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v1 2/2] i2c: designware-pci: Set ideal timing parameters for Elkhart Lake PSE
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v2 2/3] dt-bindings: i2c: apple,i2c: allow multiple compatibles
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] i2c: stm32f7: remove noisy and imprecise log messages
  • From: Alain Volmat <alain.volmat@xxxxxxxxxxx>
• Re: [RESEND PATCH] i2c: rk3x: Handle a spurious start completion interrupt flag
  • From: Ondřej Jirman <megous@xxxxxxxxxx>
• Re: [PATCH v1 2/2] i2c: designware-pci: Set ideal timing parameters for Elkhart Lake PSE
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxx>
• [PATCH AUTOSEL 4.14 07/14] i2c: i801: Fix interrupt storm from SMB_ALERT signal
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 10/17] i2c: i801: Fix interrupt storm from SMB_ALERT signal
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.4 12/25] i2c: i801: Fix interrupt storm from SMB_ALERT signal
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.10 23/43] i2c: i801: Fix interrupt storm from SMB_ALERT signal
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.15 35/68] i2c: i801: Fix interrupt storm from SMB_ALERT signal
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.15 23/68] HID: ft260: fix i2c probing for hwmon devices
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• Re: [PATCH v5 1/3] i2c: aspeed: Add slave_enable() to toggle slave mode
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• [PATCH] i2c: stm32f7: remove noisy and imprecise log messages
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH 4/4] i2c: stm32f7: use proper DMAENGINE API for termination
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH 3/4] i2c: stm32f7: stop dma transfer in case of NACK
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH 2/4] i2c: stm32f7: recover the bus on access timeout
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH 2/4] i2c: stm32f7: recover the bus on access timeout
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v3] i2c: i801: Safely share SMBus with BIOS/ACPI
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH v1 2/2] i2c: designware-pci: Set ideal timing parameters for Elkhart Lake PSE
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxx>
• Re: [PATCH 2/4] i2c: stm32f7: recover the bus on access timeout
  • From: Alain Volmat <alain.volmat@xxxxxxxxxxx>
• Re: [PATCH 03/13] dt-bindings: soc/microchip: update sys ctrlr compat string
  • From: <Conor.Dooley@xxxxxxxxxxxxx>
• Re: [PATCH 02/13] dt-bindings: interrupt-controller: add defines for mpfs-plic
  • From: <Conor.Dooley@xxxxxxxxxxxxx>
• Re: [PATCH v1 1/2] i2c: designware-pci: Add support for Fast Mode Plus and High Speed Mode
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH v5 1/3] i2c: aspeed: Add slave_enable() to toggle slave mode
  • From: Quan Nguyen <quan@xxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 0/8] soc: samsung: Add USIv2 driver
  • From: Sam Protsenko <semen.protsenko@xxxxxxxxxx>
• Re: [PATCH v1 3/7] PCI: New Primary to Sideband (P2SB) bridge support library
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: [PATCH v7 4/4] i2c: thunderx: Use pcim_alloc_irq_vectors() to allocate IRQ vectors
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH 5/8] tty: serial: samsung: Enable console as module
  • From: Sam Protsenko <semen.protsenko@xxxxxxxxxx>
• Re: [PATCH v2 0/2] i2c: aspeed: Late ack Tx done irqs and fix unhandled Tx done with NAK
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH 0/8] soc: samsung: Add USIv2 driver
  • From: David Virag <virag.david003@xxxxxxxxx>
• Re: [PATCH v7 3/4] i2c: designware: Use pcim_alloc_irq_vectors() to allocate IRQ vectors
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH 5/8] tty: serial: samsung: Enable console as module
  • From: Sam Protsenko <semen.protsenko@xxxxxxxxxx>
• Re: [PATCH v3 1/3] dt-bindings: i2c: qcom,i2c-qup: Convert txt to YAML schema
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v2 9/9] i2c: i801: Improve handling platform data for tco device
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH v3] i2c: i801: Improve handling platform data for tco device
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• Re: [RFC Patch 0/2] I2C statistics as sysfs attributes
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v2 2/2] devicetree bindings I2C Add bindings doc for Sunplus SP7021
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v1 2/2] i2c: designware-pci: Set ideal timing parameters for Elkhart Lake PSE
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v1 2/2] i2c: designware-pci: Set ideal timing parameters for Elkhart Lake PSE
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v1 1/2] i2c: designware-pci: Add support for Fast Mode Plus and High Speed Mode
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH 2/3] i2c: enable async suspend/resume for i2c adapters
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH 3/3] i2c: enable async suspend/resume on i2c client devices
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH 06/13] dt-bindings: rng: add bindings for microchip mpfs rng
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 03/13] dt-bindings: soc/microchip: update sys ctrlr compat string
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 01/13] dt-bindings: interrupt-controller: create a header for RISC-V interrupts
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 02/13] dt-bindings: interrupt-controller: add defines for mpfs-plic
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH net-next v3 0/6] MCTP I2C driver
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH] i2c: designware: Get HCNT/LCNT values from dts
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v5 1/3] i2c: aspeed: Add slave_enable() to toggle slave mode
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v6 05/15] regulator: Introduce tps68470-regulator driver
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v3] i2c: bcm-iproc: Add i2c recovery support
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH 0/8] soc: samsung: Add USIv2 driver
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx>
• Re: [PATCH v2 1/3] i2c: designware: Enable async suspend / resume of designware devices
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v2 0/3] i2c: Enable asynchronous suspend/resume
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH 0/8] soc: samsung: Add USIv2 driver
  • From: Sam Protsenko <semen.protsenko@xxxxxxxxxx>
• Re: [PATCH 3/3] i2c: stm32f7: prevent calling slave handling if no slave running
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH 2/4] i2c: stm32f7: recover the bus on access timeout
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v6 05/15] regulator: Introduce tps68470-regulator driver
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 2/4] i2c: stm32f7: recover the bus on access timeout
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v7 6/7] i2c: mediatek: Isolate speed setting via dts for special devices
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH 2/4] i2c: stm32f7: recover the bus on access timeout
  • From: Alain Volmat <alain.volmat@xxxxxxxxxxx>
• Re: [PATCH 3/3] i2c: stm32f7: prevent calling slave handling if no slave running
  • From: Alain Volmat <alain.volmat@xxxxxxxxxxx>
• Re: [PATCH 1/4] i2c: stm32f7: flush TX FIFO upon transfer errors
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v2] i2c: cadence: Add standard bus recovery support
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCHv2] i2c-mpc: Correct I2C reset procedure
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] i2c: rk3x: disable and reenable I2C after timeouts to fix stuck low SDA
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH 3/3] i2c: at91: add advanced digital filtering support for SAMA5D4
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH 0/2] i2c: at91: Add support for programmable clock source
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH 1/3] i2c: at91: move i2c_recover_bus() outside of at91_do_twi_transfer()
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH V6 3/7] dt-bindings: timer: tpm-timer: Add imx8ulp compatible string
  • From: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
• Re: [PATCH] i2c: rk3x: enable clock before getting rate
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [RESEND PATCH] i2c: rk3x: Handle a spurious start completion interrupt flag
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v1 1/1] i2c: designware: Fix the kernel doc description for struct dw_i2c_dev
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v3] i2c: i801: Safely share SMBus with BIOS/ACPI
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v2] i2c: i801: Improve handling of chip-specific feature definitions
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH 0/8] soc: samsung: Add USIv2 driver
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx>
• [PATCH v2] i2c: cadence: Add standard bus recovery support
  • From: Shubhrajyoti Datta <shubhrajyoti.datta@xxxxxxxxxx>
• Re: [PATCH v2 9/9] i2c: i801: Improve handling platform data for tco device
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v4] i2c: tegra: Add the ACPI support
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v2] i2c: i801: Remove i801_set_block_buffer_mode
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: i2c: i801: Don't silently correct invalid transfer size
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v4 11/12] dt-bindings: i2c: imx-lpi2c: Add i.MX8DXL compatible match
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH] i2c: cbus-gpio: set atomic transfer callback
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 5/8] tty: serial: samsung: Enable console as module
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx>
• Re: [PATCH 3/8] soc: samsung: Add USIv2 driver
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx>
• Re: [PATCH V6 1/7] dt-bindings: i2c: imx-lpi2c: Add imx8ulp compatible string
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH 2/8] dt-bindings: soc: samsung: Add Exynos USIv2 bindings doc
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx>
• Re: [PATCH 8/8] spi: Make SPI_S3C64XX=y impossible when EXYNOS_USI_V2=m
  • From: Sam Protsenko <semen.protsenko@xxxxxxxxxx>
• Re: [PATCH 7/8] i2c: Make I2C_EXYNOS5=y impossible when EXYNOS_USI_V2=m
  • From: Sam Protsenko <semen.protsenko@xxxxxxxxxx>
• Re: [PATCH 6/8] tty: serial: Make SERIAL_SAMSUNG=y impossible when EXYNOS_USI_V2=m
  • From: Sam Protsenko <semen.protsenko@xxxxxxxxxx>