[PATCH v1 6/6] i2c: npcm: Support NPCM845

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Tyrone Ting <kfting@xxxxxxxxxxx>

NPCM8XX uses a similar i2c module as NPCM7XX.
The only difference is that the internal HW FIFO
is larger.

Related Makefile and Kconfig files are modified
to support as well.

Fixes: 56a1485b102e ("i2c: npcm7xx: Add Nuvoton NPCM I2C controller driver")
Signed-off-by: Tyrone Ting <kfting@xxxxxxxxxxx>
Signed-off-by: Tali Perry <tali.perry1@xxxxxxxxx>
---
 drivers/i2c/busses/Kconfig       |  8 ++++----
 drivers/i2c/busses/Makefile      |  2 +-
 drivers/i2c/busses/i2c-npcm7xx.c | 29 +++++++++++++++++++++++++++++
 3 files changed, 34 insertions(+), 5 deletions(-)

diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 42da31c1ab70..ab9ee2de5e00 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -817,13 +817,13 @@ config I2C_NOMADIK
 	  I2C interface from ST-Ericsson's Nomadik and Ux500 architectures,
 	  as well as the STA2X11 PCIe I/O HUB.
 
-config I2C_NPCM7XX
+config I2C_NPCM
 	tristate "Nuvoton I2C Controller"
-	depends on ARCH_NPCM7XX || COMPILE_TEST
+	depends on ARCH_NPCM || COMPILE_TEST
 	help
 	  If you say yes to this option, support will be included for the
-	  Nuvoton I2C controller, which is available on the NPCM7xx BMC
-	  controller.
+	  Nuvoton I2C controller, which is available on the NPCM BMC
+	  controllers.
 	  Driver can also support slave mode (select I2C_SLAVE).
 
 config I2C_OCORES
diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
index 1d00dce77098..01fdf74a5565 100644
--- a/drivers/i2c/busses/Makefile
+++ b/drivers/i2c/busses/Makefile
@@ -80,7 +80,7 @@ obj-$(CONFIG_I2C_MT7621)	+= i2c-mt7621.o
 obj-$(CONFIG_I2C_MV64XXX)	+= i2c-mv64xxx.o
 obj-$(CONFIG_I2C_MXS)		+= i2c-mxs.o
 obj-$(CONFIG_I2C_NOMADIK)	+= i2c-nomadik.o
-obj-$(CONFIG_I2C_NPCM7XX)	+= i2c-npcm7xx.o
+obj-$(CONFIG_I2C_NPCM)		+= i2c-npcm7xx.o
 obj-$(CONFIG_I2C_OCORES)	+= i2c-ocores.o
 obj-$(CONFIG_I2C_OMAP)		+= i2c-omap.o
 obj-$(CONFIG_I2C_OWL)		+= i2c-owl.o
diff --git a/drivers/i2c/busses/i2c-npcm7xx.c b/drivers/i2c/busses/i2c-npcm7xx.c
index 0af97f179af2..4e0148ccc215 100644
--- a/drivers/i2c/busses/i2c-npcm7xx.c
+++ b/drivers/i2c/busses/i2c-npcm7xx.c
@@ -91,7 +91,11 @@ enum i2c_addr {
 
 /* init register and default value required to enable module */
 #define NPCM_I2CSEGCTL			0xE4
+#ifdef CONFIG_ARCH_NPCM7XX
 #define NPCM_I2CSEGCTL_INIT_VAL		0x0333F000
+#else
+#define NPCM_I2CSEGCTL_INIT_VAL		0x9333F000
+#endif
 
 /* Common regs */
 #define NPCM_I2CSDA			0x00
@@ -229,7 +233,11 @@ static const int npcm_i2caddr[I2C_NUM_OWN_ADDR] = {
 #define NPCM_I2CFIF_CTS_SLVRSTR		BIT(7)
 
 /* NPCM_I2CTXF_CTL reg fields */
+#ifdef CONFIG_ARCH_NPCM7XX
 #define NPCM_I2CTXF_CTL_TX_THR		GENMASK(4, 0)
+#else
+#define NPCM_I2CTXF_CTL_TX_THR		GENMASK(5, 0)
+#endif /*CONFIG_ARCH_NPCM7XX*/
 #define NPCM_I2CTXF_CTL_THR_TXIE	BIT(6)
 
 /* NPCM_I2CT_OUT reg fields */
@@ -238,22 +246,42 @@ static const int npcm_i2caddr[I2C_NUM_OWN_ADDR] = {
 #define NPCM_I2CT_OUT_T_OUTST		BIT(7)
 
 /* NPCM_I2CTXF_STS reg fields */
+#ifdef CONFIG_ARCH_NPCM7XX
 #define NPCM_I2CTXF_STS_TX_BYTES	GENMASK(4, 0)
+#else
+#define NPCM_I2CTXF_STS_TX_BYTES	GENMASK(5, 0)
+#endif /*CONFIG_ARCH_NPCM7XX*/
 #define NPCM_I2CTXF_STS_TX_THST		BIT(6)
 
 /* NPCM_I2CRXF_STS reg fields */
+#ifdef CONFIG_ARCH_NPCM7XX
 #define NPCM_I2CRXF_STS_RX_BYTES	GENMASK(4, 0)
+#else
+#define NPCM_I2CRXF_STS_RX_BYTES	GENMASK(5, 0)
+#endif /*CONFIG_ARCH_NPCM7XX*/
 #define NPCM_I2CRXF_STS_RX_THST		BIT(6)
 
 /* NPCM_I2CFIF_CTL reg fields */
 #define NPCM_I2CFIF_CTL_FIFO_EN		BIT(4)
 
 /* NPCM_I2CRXF_CTL reg fields */
+#ifdef CONFIG_ARCH_NPCM7XX
 #define NPCM_I2CRXF_CTL_RX_THR		GENMASK(4, 0)
+#else
+#define NPCM_I2CRXF_CTL_RX_THR		GENMASK(5, 0)
+#endif /*CONFIG_ARCH_NPCM7XX*/
+#ifdef CONFIG_ARCH_NPCM7XX
 #define NPCM_I2CRXF_CTL_LAST_PEC	BIT(5)
+#else
+#define NPCM_I2CRXF_CTL_LAST_PEC	BIT(7)
+#endif /*CONFIG_ARCH_NPCM7XX*/
 #define NPCM_I2CRXF_CTL_THR_RXIE	BIT(6)
 
+#ifdef CONFIG_ARCH_NPCM7XX
 #define I2C_HW_FIFO_SIZE		16
+#else
+#define I2C_HW_FIFO_SIZE		32
+#endif /* CONFIG_ARCH_NPCM7XX */
 
 /* I2C_VER reg fields */
 #define I2C_VER_VERSION			GENMASK(6, 0)
@@ -2356,6 +2384,7 @@ static int npcm_i2c_remove_bus(struct platform_device *pdev)
 
 static const struct of_device_id npcm_i2c_bus_of_table[] = {
 	{ .compatible = "nuvoton,npcm750-i2c", },
+	{ .compatible = "nuvoton,npcm845-i2c", },
 	{}
 };
 MODULE_DEVICE_TABLE(of, npcm_i2c_bus_of_table);
-- 
2.17.1




[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux