Re: [PATCH v4 0/4] Watchdog: sp5100_tco: Replace cd6h/cd7h port I/O accesses with MMIO accesses

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, 8 Feb 2022 11:00:31 +0100, Wolfram Sang wrote:
> > I'm still reviewing these, sorry. I only picked the first patch of the
> > series so that the sp5100_tco patches would build so I could test them.  
> 
> Ah, I see. I thought more than the first patch was needed for testing.

You need the full series to be on the safe side, otherwise there's a
risk that the two drivers will access the same registers using
different methods (legacy I/O vs MMIO) so there's no synchronization
and they could step on each other's toes.

However as I knew about this limitation, I was careful to not use the
SMBus driver while I was testing the watchdog driver :-)

-- 
Jean Delvare
SUSE L3 Support



[Index of Archives]     [Linux GPIO]     [Linux SPI]     [Linux Hardward Monitoring]     [LM Sensors]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux