pon., 7 lut 2022 o 12:42 Andy Shevchenko
<andriy.shevchenko@xxxxxxxxxxxxxxx> napisał(a):
>
> On Mon, Feb 07, 2022 at 09:27:12AM +0100, Jan Dąbroś wrote:
> > śr., 2 lut 2022 o 17:16 Andy Shevchenko
> > <andriy.shevchenko@xxxxxxxxxxxxxxx> napisał(a):
> > > On Wed, Feb 02, 2022 at 03:43:02PM +0100, Jan Dabros wrote:
>
> ...
>
> > > > +struct psp_i2c_req {
> > > > + struct psp_req_buffer_hdr hdr;
> > > > + enum psp_i2c_req_type type;
> > > > +} __aligned(32);
> > >
> > > I forgot if this alignment is requirement due to DMA or so?
> > > We may use ____cacheline_aligned in such case.
> >
> > I used some old code as a reference - this structure is mapped by PSP,
> > thus alignment applied here. I'm checking this with AMD whether it is
> > really needed or at least can be somehow limited - still waiting for
> > their response.
> > I propose to left this as is right now and eventually remove or make
> > more liberal in the future.
>
> Would be nice to clarify sooner than later.
> In either case it needs a good comment.
I confirmed that we can remove this alignment completely. Removed in v4.
Best Regards,
Jan
>
> ...
>
> > > > + return readl_poll_timeout(&mbox->cmd_fields, tmp, (tmp == expected),
> > > > + 0, 1000 * PSP_CMD_TIMEOUT_MS);
> > >
> > > 0?!
> >
> > Yes, we are checking for readiness of PSP mailbox in a tight loop. We
> > would like to proceed further quickly as soon as this bit is set.
> > Actually checking this twice per every ACQUIRE&RELEASE - once before
> > sending command (to check whether PSP is ready to accept requests) and
> > second time after sending it. Do you think we should increase
> > @sleep_us value?
>
> It depends on what you have in mind about hardware. I'm fine with either way,
> but 0 has to be explained (in the comment).
>
> --
> With Best Regards,
> Andy Shevchenko
>
>
