Implement an I2C controller sharing mechanism between the host (kernel)
and PSP co-processor on some platforms equipped with AMD Cezanne SoC.
On these platforms we need to implement "software" i2c arbitration.
Default arbitration owner is PSP and kernel asks for acquire as well
as inform about release of the i2c bus via mailbox mechanism.
+---------+
<- ACQUIRE | |
+---------| CPU |\
| | | \ +----------+ SDA
| +---------+ \ | |-------
MAILBOX +--> | I2C-DW | SCL
| +---------+ | |-------
| | | +----------+
+---------| PSP |
<- ACK | |
+---------+
+---------+
<- RELEASE | |
+---------| CPU |
| | | +----------+ SDA
| +---------+ | |-------
MAILBOX +--> | I2C-DW | SCL
| +---------+ / | |-------
| | | / +----------+
+---------| PSP |/
<- ACK | |
+---------+
The solution is similar to i2c-designware-baytrail.c implementation, where
we are using a generic i2c-designware-* driver with a small "wrapper".
In contrary to baytrail semaphore implementation, beside internal
acquire_lock() and release_lock() methods we are also applying quirks to
lock_bus() and unlock_bus() global adapter methods. With this in place
all i2c clients drivers may lock i2c bus for a desired number of i2c
transactions (e.g. write-wait-read) without being aware of that such bus
is shared with another entity.
Modify i2c_dw_probe_lock_support() to select correct semaphore
implementation at runtime, since now we have more than one available.
Configure new matching ACPI ID "AMDI0019" and register
ARBITRATION_SEMAPHORE flag in order to distinguish setup with PSP
arbitration.
Add myself as a reviewer for I2C DesignWare in order to help with reviewing
and testing possible changes touching new i2c-designware-amdpsp.c module.
Signed-off-by: Jan Dabros <jsd@xxxxxxxxxxxx>
---
MAINTAINERS | 1 +
drivers/acpi/acpi_apd.c | 7 +-
drivers/i2c/busses/Kconfig | 11 +
drivers/i2c/busses/Makefile | 1 +
drivers/i2c/busses/i2c-designware-amdpsp.c | 389 +++++++++++++++++++
drivers/i2c/busses/i2c-designware-baytrail.c | 12 +-
drivers/i2c/busses/i2c-designware-core.h | 18 +-
drivers/i2c/busses/i2c-designware-platdrv.c | 60 +++
8 files changed, 487 insertions(+), 12 deletions(-)
create mode 100644 drivers/i2c/busses/i2c-designware-amdpsp.c
diff --git a/MAINTAINERS b/MAINTAINERS
index f41088418aae..e0a7e05c5a41 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -18666,6 +18666,7 @@ SYNOPSYS DESIGNWARE I2C DRIVER
M: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
R: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
R: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
+R: Jan Dabros <jsd@xxxxxxxxxxxx>
L: linux-i2c@xxxxxxxxxxxxxxx
S: Maintained
F: drivers/i2c/busses/i2c-designware-*
diff --git a/drivers/acpi/acpi_apd.c b/drivers/acpi/acpi_apd.c
index e7934ba79b02..ad245bbd965e 100644
--- a/drivers/acpi/acpi_apd.c
+++ b/drivers/acpi/acpi_apd.c
@@ -232,12 +232,13 @@ static const struct acpi_device_id acpi_apd_device_ids[] = {
/* Generic apd devices */
#ifdef CONFIG_X86_AMD_PLATFORM_DEVICE
{ "AMD0010", APD_ADDR(cz_i2c_desc) },
- { "AMDI0010", APD_ADDR(wt_i2c_desc) },
{ "AMD0020", APD_ADDR(cz_uart_desc) },
- { "AMDI0020", APD_ADDR(cz_uart_desc) },
- { "AMDI0022", APD_ADDR(cz_uart_desc) },
{ "AMD0030", },
{ "AMD0040", APD_ADDR(fch_misc_desc)},
+ { "AMDI0010", APD_ADDR(wt_i2c_desc) },
+ { "AMDI0019", APD_ADDR(wt_i2c_desc) },
+ { "AMDI0020", APD_ADDR(cz_uart_desc) },
+ { "AMDI0022", APD_ADDR(cz_uart_desc) },
{ "HYGO0010", APD_ADDR(wt_i2c_desc) },
#endif
#ifdef CONFIG_ARM64
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 42da31c1ab70..5ea26a7aa1d5 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -553,6 +553,17 @@ config I2C_DESIGNWARE_PLATFORM
This driver can also be built as a module. If so, the module
will be called i2c-designware-platform.
+config I2C_DESIGNWARE_AMDPSP
+ bool "AMD PSP I2C semaphore support"
+ depends on X86_MSR
+ depends on ACPI
+ depends on I2C_DESIGNWARE_PLATFORM
+ help
+ This driver enables managed host access to the selected I2C bus shared
+ between AMD CPU and AMD PSP.
+
+ You should say Y if running on an AMD system equipped with the PSP.
+
config I2C_DESIGNWARE_BAYTRAIL
bool "Intel Baytrail I2C semaphore support"
depends on ACPI
diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
index 1d00dce77098..752f47be3fc1 100644
--- a/drivers/i2c/busses/Makefile
+++ b/drivers/i2c/busses/Makefile
@@ -54,6 +54,7 @@ i2c-designware-core-y += i2c-designware-master.o
i2c-designware-core-$(CONFIG_I2C_DESIGNWARE_SLAVE) += i2c-designware-slave.o
obj-$(CONFIG_I2C_DESIGNWARE_PLATFORM) += i2c-designware-platform.o
i2c-designware-platform-y := i2c-designware-platdrv.o
+i2c-designware-platform-$(CONFIG_I2C_DESIGNWARE_AMDPSP) += i2c-designware-amdpsp.o
i2c-designware-platform-$(CONFIG_I2C_DESIGNWARE_BAYTRAIL) += i2c-designware-baytrail.o
obj-$(CONFIG_I2C_DESIGNWARE_PCI) += i2c-designware-pci.o
i2c-designware-pci-y := i2c-designware-pcidrv.o
diff --git a/drivers/i2c/busses/i2c-designware-amdpsp.c b/drivers/i2c/busses/i2c-designware-amdpsp.c
new file mode 100644
index 000000000000..a45e4faeb2c1
--- /dev/null
+++ b/drivers/i2c/busses/i2c-designware-amdpsp.c
@@ -0,0 +1,389 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <linux/bitfield.h>
+#include <linux/i2c.h>
+#include <linux/io-64-nonatomic-lo-hi.h>
+#include <linux/psp-sev.h>
+#include <linux/types.h>
+
+#include <asm/msr.h>
+
+#include "i2c-designware-core.h"
+
+#define MSR_AMD_PSP_ADDR 0xc00110a2
+#define PSP_MBOX_OFFSET 0x10570
+#define PSP_CMD_TIMEOUT_MS 500
+
+#define PSP_I2C_REQ_BUS_CMD 0x64
+#define PSP_I2C_REQ_RETRY_CNT 10
+#define PSP_I2C_REQ_RETRY_DELAY_USEC (50 * 1000)
+#define PSP_I2C_REQ_STS_OK 0x0
+#define PSP_I2C_REQ_STS_BUS_BUSY 0x1
+#define PSP_I2C_REQ_STS_INV_PARAM 0x3
+
+#define PSP_MBOX_FIELDS_STS GENMASK(15, 0)
+#define PSP_MBOX_FIELDS_CMD GENMASK(23, 16)
+#define PSP_MBOX_FIELDS_RESERVED GENMASK(29, 24)
+#define PSP_MBOX_FIELDS_RECOVERY BIT(30)
+#define PSP_MBOX_FIELDS_READY BIT(31)
+
+struct psp_req_buffer_hdr {
+ u32 total_size;
+ u32 status;
+};
+
+enum psp_i2c_req_type {
+ PSP_I2C_REQ_ACQUIRE,
+ PSP_I2C_REQ_RELEASE,
+ PSP_I2C_REQ_MAX
+};
+
+struct psp_i2c_req {
+ struct psp_req_buffer_hdr hdr;
+ enum psp_i2c_req_type type;
+} __aligned(32);
+
+struct psp_mbox {
+ u32 cmd_fields;
+ u64 i2c_req_addr;
+} __packed;
+
+static DEFINE_MUTEX(psp_i2c_access_mutex);
+static unsigned long psp_i2c_sem_acquired;
+static void __iomem *mbox_iomem;
+static u32 psp_i2c_access_count;
+static bool psp_i2c_mbox_fail;
+static struct device *psp_i2c_dev;
+
+/*
+ * Implementation of PSP-x86 i2c-arbitration mailbox introduced for AMD Cezanne
+ * family of SoCs.
+ */
+
+static int psp_get_mbox_addr(unsigned long *mbox_addr)
+{
+ unsigned long long psp_mmio;
+
+ if (rdmsrl_safe(MSR_AMD_PSP_ADDR, &psp_mmio))
+ return -EIO;
+
+ *mbox_addr = (unsigned long)(psp_mmio + PSP_MBOX_OFFSET);
+
+ return 0;
+}
+
+static int psp_mbox_probe(void)
+{
+ unsigned long mbox_addr;
+ int ret;
+
+ ret = psp_get_mbox_addr(&mbox_addr);
+ if (ret)
+ return ret;
+
+ mbox_iomem = ioremap(mbox_addr, sizeof(struct psp_mbox));
+ if (!mbox_iomem)
+ return -ENOMEM;
+
+ return 0;
+}
+
+
+/* Recovery field should be equal 0 to start sending commands */
+static int psp_check_mbox_recovery(struct psp_mbox __iomem *mbox)
+{
+ u32 tmp;
+
+ tmp = readl(&mbox->cmd_fields);
+
+ return FIELD_GET(PSP_MBOX_FIELDS_RECOVERY, tmp);
+}
+
+static int psp_wait_cmd(struct psp_mbox __iomem *mbox)
+{
+ u32 tmp, expected;
+
+ /* Expect mbox_cmd to be cleared and ready bit to be set by PSP */
+ expected = FIELD_PREP(PSP_MBOX_FIELDS_READY, 1);
+
+ return readl_poll_timeout(&mbox->cmd_fields, tmp, (tmp == expected),
+ 0, 1000 * PSP_CMD_TIMEOUT_MS);
+}
+
+/* Status equal to 0 means that PSP succeed processing command */
+static int psp_check_mbox_sts(struct psp_mbox __iomem *mbox)
+{
+ u32 cmd_reg;
+
+ cmd_reg = readl(&mbox->cmd_fields);
+
+ return FIELD_GET(PSP_MBOX_FIELDS_STS, cmd_reg);
+}
+
+static int psp_send_cmd(struct psp_i2c_req *req)
+{
+ struct psp_mbox __iomem *mbox = mbox_iomem;
+ phys_addr_t req_addr;
+ u32 cmd_reg;
+
+ if (psp_check_mbox_recovery(mbox))
+ return -EIO;
+
+ if (psp_wait_cmd(mbox))
+ return -EBUSY;
+
+ /*
+ * Fill mailbox with address of command-response buffer, which will be
+ * used for sending i2c requests as well as reading status returned by
+ * PSP. Use physical address of buffer, since PSP will map this region.
+ */
+ req_addr = __psp_pa((void *)req);
+ writeq(req_addr, &mbox->i2c_req_addr);
+
+ /* Write command register to trigger processing */
+ cmd_reg = FIELD_PREP(PSP_MBOX_FIELDS_CMD, PSP_I2C_REQ_BUS_CMD);
+ writel(cmd_reg, &mbox->cmd_fields);
+
+ if (psp_wait_cmd(mbox))
+ return -ETIMEDOUT;
+
+ if (psp_check_mbox_sts(mbox))
+ return -EIO;
+
+ return 0;
+}
+
+/* Helper to verify status returned by PSP */
+static int check_i2c_req_sts(struct psp_i2c_req *req)
+{
+ int status;
+
+ status = readl(&req->hdr.status);
+
+ switch (status) {
+ case PSP_I2C_REQ_STS_OK:
+ return 0;
+ case PSP_I2C_REQ_STS_BUS_BUSY:
+ return -EBUSY;
+ case PSP_I2C_REQ_STS_INV_PARAM:
+ default:
+ return -EIO;
+ };
+}
+
+static int psp_send_check_i2c_req(struct psp_i2c_req *req)
+{
+ /*
+ * Errors in x86-PSP i2c-arbitration protocol may occur at two levels:
+ * 1. mailbox communication - PSP is not operational or some IO errors
+ * with basic communication had happened;
+ * 2. i2c-requests - PSP refuses to grant i2c arbitration to x86 for too
+ * long.
+ * In order to distinguish between these two in error handling code, all
+ * errors on the first level (returned by psp_send_cmd) are shadowed by
+ * -EIO.
+ */
+ if (psp_send_cmd(req))
+ return -EIO;
+
+ return check_i2c_req_sts(req);
+}
+
+static int psp_send_i2c_req(enum psp_i2c_req_type i2c_req_type)
+{
+ struct psp_i2c_req *req;
+ unsigned long start;
+ int status, ret;
+
+ /* Allocate command-response buffer */
+ req = kzalloc(sizeof(*req), GFP_KERNEL);
+ if (!req)
+ return -ENOMEM;
+
+ req->hdr.total_size = sizeof(*req);
+ req->type = i2c_req_type;
+
+ start = jiffies;
+ ret = read_poll_timeout(psp_send_check_i2c_req, status,
+ (status != -EBUSY),
+ PSP_I2C_REQ_RETRY_DELAY_USEC,
+ PSP_I2C_REQ_RETRY_CNT * PSP_I2C_REQ_RETRY_DELAY_USEC,
+ 0, req);
+ if (ret)
+ goto cleanup;
+
+ if (status) {
+ ret = status;
+ goto cleanup;
+ }
+
+ dev_dbg(psp_i2c_dev, "Request accepted by PSP after %ums\n",
+ jiffies_to_msecs(jiffies - start));
+
+cleanup:
+ kfree(req);
+ return ret;
+}
+
+static int psp_acquire_i2c_bus(void)
+{
+ int status;
+
+ mutex_lock(&psp_i2c_access_mutex);
+
+ /* Return early if mailbox malfunctioned */
+ if (psp_i2c_mbox_fail)
+ goto cleanup;
+
+ /*
+ * Simply increment usage counter and return if PSP semaphore was
+ * already taken by kernel.
+ */
+ if (psp_i2c_access_count > 0) {
+ psp_i2c_access_count++;
+ goto cleanup;
+ };
+
+ status = psp_send_i2c_req(PSP_I2C_REQ_ACQUIRE);
+ if (status) {
+ if (status == -ETIMEDOUT)
+ dev_err(psp_i2c_dev, "Timed out waiting for PSP to release I2C bus\n");
+ else
+ dev_err(psp_i2c_dev, "PSP communication error\n");
+
+ dev_err(psp_i2c_dev, "Assume i2c bus is for exclusive host usage\n");
+ psp_i2c_mbox_fail = true;
+ goto cleanup;
+ }
+
+ psp_i2c_sem_acquired = jiffies;
+ psp_i2c_access_count++;
+
+ /*
+ * In case of errors with PSP arbitrator psp_i2c_mbox_fail variable is
+ * set above. As a consequence consecutive calls to acquire will bypass
+ * communication with PSP. At any case i2c bus is granted to the caller,
+ * thus always return success.
+ */
+cleanup:
+ mutex_unlock(&psp_i2c_access_mutex);
+ return 0;
+}
+
+static void psp_release_i2c_bus(void)
+{
+ int status;
+
+ mutex_lock(&psp_i2c_access_mutex);
+
+ /* Return early if mailbox was malfunctional */
+ if (psp_i2c_mbox_fail)
+ goto cleanup;
+
+ /*
+ * If we are last owner of PSP semaphore, need to release aribtration
+ * via mailbox.
+ */
+ psp_i2c_access_count--;
+ if (psp_i2c_access_count > 0)
+ goto cleanup;
+
+ /* Send a release command to PSP */
+ status = psp_send_i2c_req(PSP_I2C_REQ_RELEASE);
+ if (status) {
+ if (status == -ETIMEDOUT)
+ dev_err(psp_i2c_dev, "Timed out waiting for PSP to acquire I2C bus\n");
+ else
+ dev_err(psp_i2c_dev, "PSP communication error\n");
+
+ dev_err(psp_i2c_dev, "Assume i2c bus is for exclusive host usage\n");
+ psp_i2c_mbox_fail = true;
+ goto cleanup;
+ }
+
+ dev_dbg(psp_i2c_dev, "PSP semaphore held for %ums\n",
+ jiffies_to_msecs(jiffies - psp_i2c_sem_acquired));
+
+cleanup:
+ mutex_unlock(&psp_i2c_access_mutex);
+}
+
+/*
+ * Locking methods are based on the default implementation from
+ * drivers/i2c/i2c-core-base.c, but with psp acquire and release operations
+ * added. With this in place we can ensure that i2c clients on the bus shared
+ * with psp are able to lock HW access to the bus for arbitrary number of
+ * operations - that is e.g. write-wait-read.
+ */
+static void i2c_adapter_dw_psp_lock_bus(struct i2c_adapter *adapter,
+ unsigned int flags)
+{
+ psp_acquire_i2c_bus();
+ rt_mutex_lock_nested(&adapter->bus_lock, i2c_adapter_depth(adapter));
+}
+
+static int i2c_adapter_dw_psp_trylock_bus(struct i2c_adapter *adapter,
+ unsigned int flags)
+{
+ int ret;
+
+ ret = rt_mutex_trylock(&adapter->bus_lock);
+ if (ret)
+ return ret;
+
+ psp_acquire_i2c_bus();
+
+ return ret;
+}
+
+static void i2c_adapter_dw_psp_unlock_bus(struct i2c_adapter *adapter,
+ unsigned int flags)
+{
+ psp_release_i2c_bus();
+ rt_mutex_unlock(&adapter->bus_lock);
+}
+
+static const struct i2c_lock_operations i2c_dw_psp_lock_ops = {
+ .lock_bus = i2c_adapter_dw_psp_lock_bus,
+ .trylock_bus = i2c_adapter_dw_psp_trylock_bus,
+ .unlock_bus = i2c_adapter_dw_psp_unlock_bus,
+};
+
+int i2c_dw_amdpsp_probe_lock_support(struct dw_i2c_dev *dev)
+{
+ int ret;
+
+ if (!dev)
+ return -ENODEV;
+
+ if (!(dev->flags & ARBITRATION_SEMAPHORE))
+ return -ENODEV;
+
+ /* Allow to bind only one instance of a driver */
+ if (psp_i2c_dev)
+ return -EEXIST;
+
+ psp_i2c_dev = dev->dev;
+
+ ret = psp_mbox_probe();
+ if (ret)
+ return ret;
+
+ dev_info(psp_i2c_dev, "I2C bus managed by AMD PSP\n");
+
+ /*
+ * Install global locking callbacks for adapter as well as internal i2c
+ * controller locks.
+ */
+ dev->adapter.lock_ops = &i2c_dw_psp_lock_ops;
+ dev->acquire_lock = psp_acquire_i2c_bus;
+ dev->release_lock = psp_release_i2c_bus;
+
+ return 0;
+}
+
+/* Unmap area used as a mailbox with PSP */
+void i2c_dw_amdpsp_remove_lock_support(struct dw_i2c_dev *dev)
+{
+ iounmap(mbox_iomem);
+}
diff --git a/drivers/i2c/busses/i2c-designware-baytrail.c b/drivers/i2c/busses/i2c-designware-baytrail.c
index c6a7a00e1d52..45774aa47c28 100644
--- a/drivers/i2c/busses/i2c-designware-baytrail.c
+++ b/drivers/i2c/busses/i2c-designware-baytrail.c
@@ -12,25 +12,25 @@
#include "i2c-designware-core.h"
-int i2c_dw_probe_lock_support(struct dw_i2c_dev *dev)
+int i2c_dw_baytrail_probe_lock_support(struct dw_i2c_dev *dev)
{
acpi_status status;
unsigned long long shared_host = 0;
acpi_handle handle;
- if (!dev || !dev->dev)
- return 0;
+ if (!dev)
+ return -ENODEV;
handle = ACPI_HANDLE(dev->dev);
if (!handle)
- return 0;
+ return -ENODEV;
status = acpi_evaluate_integer(handle, "_SEM", NULL, &shared_host);
if (ACPI_FAILURE(status))
- return 0;
+ return -ENODEV;
if (!shared_host)
- return 0;
+ return -ENODEV;
if (!iosf_mbi_available())
return -EPROBE_DEFER;
diff --git a/drivers/i2c/busses/i2c-designware-core.h b/drivers/i2c/busses/i2c-designware-core.h
index 4b26cba40139..1d65212fddbd 100644
--- a/drivers/i2c/busses/i2c-designware-core.h
+++ b/drivers/i2c/busses/i2c-designware-core.h
@@ -227,6 +227,8 @@ struct reset_control;
* @hs_lcnt: high speed LCNT value
* @acquire_lock: function to acquire a hardware lock on the bus
* @release_lock: function to release a hardware lock on the bus
+ * @semaphore_idx: Index of table with semaphore type attached to the bus. It's
+ * -1 if there is no semaphore.
* @shared_with_punit: true if this bus is shared with the SoCs PUNIT
* @disable: function to disable the controller
* @disable_int: function to disable all interrupts
@@ -285,6 +287,7 @@ struct dw_i2c_dev {
u16 hs_lcnt;
int (*acquire_lock)(void);
void (*release_lock)(void);
+ int semaphore_idx;
bool shared_with_punit;
void (*disable)(struct dw_i2c_dev *dev);
void (*disable_int)(struct dw_i2c_dev *dev);
@@ -297,6 +300,7 @@ struct dw_i2c_dev {
#define ACCESS_INTR_MASK BIT(0)
#define ACCESS_NO_IRQ_SUSPEND BIT(1)
+#define ARBITRATION_SEMAPHORE BIT(2)
#define MODEL_MSCC_OCELOT BIT(8)
#define MODEL_BAIKAL_BT1 BIT(9)
@@ -310,6 +314,11 @@ struct dw_i2c_dev {
#define AMD_UCSI_INTR_REG 0x474
#define AMD_UCSI_INTR_EN 0xd
+struct i2c_dw_semaphore_callbacks {
+ int (*probe)(struct dw_i2c_dev *dev);
+ void (*remove)(struct dw_i2c_dev *dev);
+};
+
int i2c_dw_init_regmap(struct dw_i2c_dev *dev);
u32 i2c_dw_scl_hcnt(u32 ic_clk, u32 tSYMBOL, u32 tf, int cond, int offset);
u32 i2c_dw_scl_lcnt(u32 ic_clk, u32 tLOW, u32 tf, int offset);
@@ -370,9 +379,12 @@ static inline void i2c_dw_configure(struct dw_i2c_dev *dev)
}
#if IS_ENABLED(CONFIG_I2C_DESIGNWARE_BAYTRAIL)
-extern int i2c_dw_probe_lock_support(struct dw_i2c_dev *dev);
-#else
-static inline int i2c_dw_probe_lock_support(struct dw_i2c_dev *dev) { return 0; }
+int i2c_dw_baytrail_probe_lock_support(struct dw_i2c_dev *dev);
+#endif
+
+#if IS_ENABLED(CONFIG_I2C_DESIGNWARE_AMDPSP)
+int i2c_dw_amdpsp_probe_lock_support(struct dw_i2c_dev *dev);
+void i2c_dw_amdpsp_remove_lock_support(struct dw_i2c_dev *dev);
#endif
int i2c_dw_validate_speed(struct dw_i2c_dev *dev);
diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c
index 2bd81abc86f6..9973ac894a51 100644
--- a/drivers/i2c/busses/i2c-designware-platdrv.c
+++ b/drivers/i2c/busses/i2c-designware-platdrv.c
@@ -50,6 +50,7 @@ static const struct acpi_device_id dw_i2c_acpi_match[] = {
{ "808622C1", ACCESS_NO_IRQ_SUSPEND },
{ "AMD0010", ACCESS_INTR_MASK },
{ "AMDI0010", ACCESS_INTR_MASK },
+ { "AMDI0019", ACCESS_INTR_MASK | ARBITRATION_SEMAPHORE },
{ "AMDI0510", 0 },
{ "APMC0D0F", 0 },
{ "HISI02A1", 0 },
@@ -204,6 +205,63 @@ static const struct dmi_system_id dw_i2c_hwmon_class_dmi[] = {
{ } /* terminate list */
};
+static const struct i2c_dw_semaphore_callbacks i2c_dw_semaphore_cb_table[] = {
+#ifdef CONFIG_I2C_DESIGNWARE_BAYTRAIL
+ {
+ .probe = i2c_dw_baytrail_probe_lock_support,
+ },
+#endif
+#ifdef CONFIG_I2C_DESIGNWARE_AMDPSP
+ {
+ .probe = i2c_dw_amdpsp_probe_lock_support,
+ .remove = i2c_dw_amdpsp_remove_lock_support,
+ },
+#endif
+ {}
+};
+
+static int i2c_dw_probe_lock_support(struct dw_i2c_dev *dev)
+{
+ const struct i2c_dw_semaphore_callbacks *ptr;
+ int i = 0;
+ int ret;
+
+ ptr = i2c_dw_semaphore_cb_table;
+
+ dev->semaphore_idx = -1;
+
+ while (ptr->probe) {
+ ret = ptr->probe(dev);
+ if (ret) {
+ /*
+ * If there is no semaphore device attached to this
+ * controller, we shouldn't abort general i2c_controller
+ * probe.
+ */
+ if (ret != -ENODEV)
+ return ret;
+
+ i++;
+ ptr++;
+ continue;
+ }
+
+ dev->semaphore_idx = i;
+ break;
+ }
+
+ return 0;
+}
+
+static void i2c_dw_remove_lock_support(struct dw_i2c_dev *dev)
+{
+ if (dev->semaphore_idx < 0)
+ return;
+
+ if (i2c_dw_semaphore_cb_table[dev->semaphore_idx].remove)
+ i2c_dw_semaphore_cb_table[dev->semaphore_idx].remove(dev);
+}
+
static int dw_i2c_plat_probe(struct platform_device *pdev)
{
struct i2c_adapter *adap;
@@ -334,6 +392,8 @@ static int dw_i2c_plat_remove(struct platform_device *pdev)
pm_runtime_put_sync(&pdev->dev);
dw_i2c_plat_pm_cleanup(dev);
+ i2c_dw_remove_lock_support(dev);
+
reset_control_assert(dev->rst);
return 0;
--
2.35.0.rc2.247.g8bbb082509-goog
