From: Jonathan Yong <jonathan.yong@xxxxxxxxx> There are already two and at least one more user is coming which require an access to Primary to Sideband (P2SB) bridge in order to get IO or MMIO BAR hidden by BIOS. Create a library to access P2SB for x86 devices. Background information ====================== Note, the term "bridge" is used in the documentation and it has nothing to do with a PCI (host) bridge as per the PCI specifications. The P2SB is an interesting device by its nature and hardware design. First of all, it has several devices in the hardware behind it. These devices may or may not be represented as ACPI devices by a firmware. It also has a hardwired (to 0s) the least significant bits of the base address register which is represented by the only 64-bit BAR0. It means that OS mustn't reallocate the BAR. On top of that in some cases P2SB is represented by function 0 on PCI slot (in terms of B:D.F) and according to the PCI specification any other function can't be seen until function 0 is present and visible. In the PCI configuration space of P2SB device the full 32-bit register is allocated for the only purpose of hiding the entire P2SB device. As per [3]: 3.1.39 P2SB Control (P2SBC)—Offset E0h Hide Device (HIDE): When this bit is set, the P2SB will return 1s on any PCI Configuration Read on IOSF-P. All other transactions including PCI Configuration Writes on IOSF-P are unaffected by this. This does not affect reads performed on the IOSF-SB interface. This doesn't prevent MMIO accesses, although preventing the OS from assigning these addresses. The firmware on the affected platforms marks the region as unusable (by cutting it off from the PCI host bridge resources) as depicted in the Apollo Lake example below: PCI host bridge to bus 0000:00 pci_bus 0000:00: root bus resource [io 0x0070-0x0077] pci_bus 0000:00: root bus resource [io 0x0000-0x006f window] pci_bus 0000:00: root bus resource [io 0x0078-0x0cf7 window] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] pci_bus 0000:00: root bus resource [mem 0x7c000001-0x7fffffff window] pci_bus 0000:00: root bus resource [mem 0x7b800001-0x7bffffff window] pci_bus 0000:00: root bus resource [mem 0x80000000-0xcfffffff window] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xefffffff window] pci_bus 0000:00: root bus resource [bus 00-ff] The P2SB 16MB BAR is located at 0xd0000000-0xd0ffffff memory window. The generic solution ==================== The generic solution for all cases when we need to access to the information behind P2SB device is a library code where users ask for necessary resources by demand and hence those users take care of not being run on the systems where this access is not required. The library provides the p2sb_bar() API to retrieve the MMIO of the BAR0 of the device from P2SB device slot. P2SB unconditional unhiding awareness ===================================== Technically it's possible to unhide the P2SB device and devices on the same PCI slot and access them at any time as needed. But there are several potential issues with that: - the systems were never tested against such configuration and hence nobody knows what kind of bugs it may bring, especially when we talk about SPI NOR case which contains Intel FirmWare Image (IFWI) code (including BIOS) and already known to be problematic in the past for end users - the PCI by its nature is a hotpluggable bus and in case somebody attaches a driver to the functions of a P2SB slot device(s) the end user experience and system behaviour can be unpredictable - the kernel code would need some ugly hacks (or code looking as an ugly hack) under arch/x86/pci in order to enable these devices on only selected platforms (which may include CPU ID table followed by a potentially growing number of DMI strings The future improvements ======================= The future improvements with this code may go in order to gain some kind of cache, if it's possible at all, to prevent unhiding and hiding many times to take static information that may be saved once per boot. Links ===== [1]: https://lab.whitequark.org/notes/2017-11-08/accessing-intel-ich-pch-gpios/ [2]: https://cdrdv2.intel.com/v1/dl/getContent/332690?wapkw=332690 [3]: https://cdrdv2.intel.com/v1/dl/getContent/332691?wapkw=332691 [4]: https://medium.com/@jacksonchen_43335/bios-gpio-p2sb-70e9b829b403 Signed-off-by: Jonathan Yong <jonathan.yong@xxxxxxxxx> Co-developed-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx> Signed-off-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx> Acked-by: Hans de Goede <hdegoede@xxxxxxxxxx> Acked-by: Linus Walleij <linus.walleij@xxxxxxxxxx> --- drivers/platform/x86/intel/Kconfig | 12 + drivers/platform/x86/intel/Makefile | 1 + drivers/platform/x86/intel/p2sb.c | 299 +++++++++++++++++++++++++ include/linux/platform_data/x86/p2sb.h | 27 +++ 4 files changed, 339 insertions(+) create mode 100644 drivers/platform/x86/intel/p2sb.c create mode 100644 include/linux/platform_data/x86/p2sb.h diff --git a/drivers/platform/x86/intel/Kconfig b/drivers/platform/x86/intel/Kconfig index 8e65086bb6c8..55b499fb8249 100644 --- a/drivers/platform/x86/intel/Kconfig +++ b/drivers/platform/x86/intel/Kconfig @@ -68,6 +68,18 @@ config INTEL_OAKTRAIL enable/disable the Camera, WiFi, BT etc. devices. If in doubt, say Y here; it will only load on supported platforms. +config P2SB + bool "Primary to Sideband (P2SB) bridge access support" + depends on PCI + help + The Primary to Sideband (P2SB) bridge is an interface to some + PCI devices connected through it. In particular, SPI NOR controller + in Intel Apollo Lake SoC is one of such devices. + + The main purpose of this library is to unhide P2SB device in case + firmware kept it hidden on some platforms in order to access devices + behind it. + config INTEL_BXTWC_PMIC_TMU tristate "Intel Broxton Whiskey Cove TMU Driver" depends on INTEL_SOC_PMIC_BXTWC diff --git a/drivers/platform/x86/intel/Makefile b/drivers/platform/x86/intel/Makefile index 35f2066578b2..6ce944285730 100644 --- a/drivers/platform/x86/intel/Makefile +++ b/drivers/platform/x86/intel/Makefile @@ -26,6 +26,7 @@ intel_int0002_vgpio-y := int0002_vgpio.o obj-$(CONFIG_INTEL_INT0002_VGPIO) += intel_int0002_vgpio.o intel_oaktrail-y := oaktrail.o obj-$(CONFIG_INTEL_OAKTRAIL) += intel_oaktrail.o +obj-$(CONFIG_P2SB) += p2sb.o intel_vsec-y := vsec.o obj-$(CONFIG_INTEL_VSEC) += intel_vsec.o diff --git a/drivers/platform/x86/intel/p2sb.c b/drivers/platform/x86/intel/p2sb.c new file mode 100644 index 000000000000..8c12882d0bde --- /dev/null +++ b/drivers/platform/x86/intel/p2sb.c @@ -0,0 +1,299 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Primary to Sideband (P2SB) bridge access support + * + * Copyright (c) 2017, 2021-2022 Intel Corporation. + * + * Authors: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx> + * Jonathan Yong <jonathan.yong@xxxxxxxxx> + */ + +#include <linux/bitops.h> +#include <linux/export.h> +#include <linux/pci.h> +#include <linux/platform_data/x86/p2sb.h> +#include <linux/printk.h> + +#include <asm/cpu_device_id.h> +#include <asm/intel-family.h> + +#define p2sb_printk(level, bus, devfn, fmt, arg...) \ + printk(level "pci %04x:%02x:%02x.%d: " fmt, \ + pci_domain_nr(bus), (bus)->number, PCI_SLOT(devfn), PCI_FUNC(devfn), ##arg) + +#define p2sb_err(bus, devfn, fmt, arg...) p2sb_printk(KERN_ERR, (bus), devfn, fmt, ##arg) +#define p2sb_info(bus, devfn, fmt, arg...) p2sb_printk(KERN_INFO, (bus), devfn, fmt, ##arg) + +#define P2SBC 0xe0 +#define P2SBC_HIDE BIT(8) + +static const struct x86_cpu_id p2sb_cpu_ids[] = { + X86_MATCH_INTEL_FAM6_MODEL(ATOM_GOLDMONT, PCI_DEVFN(13, 0)), + {} +}; + +static int p2sb_get_devfn(unsigned int *devfn) +{ + const struct x86_cpu_id *id; + + id = x86_match_cpu(p2sb_cpu_ids); + if (!id) + return -ENODEV; + + *devfn = (unsigned int)id->driver_data; + return 0; +} + +/* + * Here is practically a copy'n'paste of __pci_read_base() and Co, + * modified to work with PCI bus and devfn instead of PCI device. + * + * Note, the PCI core doesn't want to have that being refactored + * and reused. + */ +static u64 pci_size(u64 base, u64 maxbase, u64 mask) +{ + u64 size = mask & maxbase; /* Find the significant bits */ + if (!size) + return 0; + + /* + * Get the lowest of them to find the decode size, and from that + * the extent. + */ + size = size & ~(size-1); + + /* + * base == maxbase can be valid only if the BAR has already been + * programmed with all 1s. + */ + if (base == maxbase && ((base | (size - 1)) & mask) != mask) + return 0; + + return size; +} + +static inline unsigned long decode_bar(u32 bar) +{ + u32 mem_type; + unsigned long flags; + + if ((bar & PCI_BASE_ADDRESS_SPACE) == PCI_BASE_ADDRESS_SPACE_IO) { + flags = bar & ~PCI_BASE_ADDRESS_IO_MASK; + flags |= IORESOURCE_IO; + return flags; + } + + flags = bar & ~PCI_BASE_ADDRESS_MEM_MASK; + flags |= IORESOURCE_MEM; + if (flags & PCI_BASE_ADDRESS_MEM_PREFETCH) + flags |= IORESOURCE_PREFETCH; + + mem_type = bar & PCI_BASE_ADDRESS_MEM_TYPE_MASK; + switch (mem_type) { + case PCI_BASE_ADDRESS_MEM_TYPE_32: + break; + case PCI_BASE_ADDRESS_MEM_TYPE_1M: + /* 1M mem BAR treated as 32-bit BAR */ + break; + case PCI_BASE_ADDRESS_MEM_TYPE_64: + flags |= IORESOURCE_MEM_64; + break; + default: + /* mem unknown type treated as 32-bit BAR */ + break; + } + return flags; +} + +/** + * __pci_bus_read_base - Read a PCI BAR + * @bus: the PCI bus + * @devfn: the PCI device and function + * @res: resource buffer to be filled in + * @pos: BAR position in the config space + * + * Returns 1 if the BAR is 64-bit, or 0 if 32-bit. + * In case of error resulting @res->flags is 0. + */ +static int __pci_bus_read_base(struct pci_bus *bus, unsigned int devfn, + struct resource *res, unsigned int pos) +{ + u32 l = 0, sz = 0, mask = ~0; + u64 l64, sz64, mask64; + struct pci_bus_region region, inverted_region; + + pci_bus_read_config_dword(bus, devfn, pos, &l); + pci_bus_write_config_dword(bus, devfn, pos, l | mask); + pci_bus_read_config_dword(bus, devfn, pos, &sz); + pci_bus_write_config_dword(bus, devfn, pos, l); + + /* + * All bits set in sz means the device isn't working properly. + * If the BAR isn't implemented, all bits must be 0. If it's a + * memory BAR or a ROM, bit 0 must be clear; if it's an io BAR, bit + * 1 must be clear. + */ + if (PCI_POSSIBLE_ERROR(sz)) + sz = 0; + + /* + * I don't know how l can have all bits set. Copied from old code. + * Maybe it fixes a bug on some ancient platform. + */ + if (PCI_POSSIBLE_ERROR(l)) + l = 0; + + res->flags = decode_bar(l); + res->flags |= IORESOURCE_SIZEALIGN; + if (res->flags & IORESOURCE_IO) { + l64 = l & PCI_BASE_ADDRESS_IO_MASK; + sz64 = sz & PCI_BASE_ADDRESS_IO_MASK; + mask64 = PCI_BASE_ADDRESS_IO_MASK & (u32)IO_SPACE_LIMIT; + } else { + l64 = l & PCI_BASE_ADDRESS_MEM_MASK; + sz64 = sz & PCI_BASE_ADDRESS_MEM_MASK; + mask64 = (u32)PCI_BASE_ADDRESS_MEM_MASK; + } + + if (res->flags & IORESOURCE_MEM_64) { + pci_bus_read_config_dword(bus, devfn, pos + 4, &l); + pci_bus_write_config_dword(bus, devfn, pos + 4, ~0); + pci_bus_read_config_dword(bus, devfn, pos + 4, &sz); + pci_bus_write_config_dword(bus, devfn, pos + 4, l); + + l64 |= ((u64)l << 32); + sz64 |= ((u64)sz << 32); + mask64 |= ((u64)~0 << 32); + } + + if (!sz64) + goto fail; + + sz64 = pci_size(l64, sz64, mask64); + if (!sz64) { + p2sb_info(bus, devfn, FW_BUG "reg 0x%x: invalid BAR (can't size)\n", pos); + goto fail; + } + + if (res->flags & IORESOURCE_MEM_64) { + if ((sizeof(pci_bus_addr_t) < 8 || sizeof(resource_size_t) < 8) + && sz64 > 0x100000000ULL) { + res->flags |= IORESOURCE_UNSET | IORESOURCE_DISABLED; + res->start = 0; + res->end = 0; + p2sb_err(bus, devfn, + "reg 0x%x: can't handle BAR larger than 4GB (size %#010llx)\n", + pos, (unsigned long long)sz64); + goto out; + } + + if ((sizeof(pci_bus_addr_t) < 8) && l) { + /* Above 32-bit boundary; try to reallocate */ + res->flags |= IORESOURCE_UNSET; + res->start = 0; + res->end = sz64 - 1; + p2sb_info(bus, devfn, + "reg 0x%x: can't handle BAR above 4GB (bus address %#010llx)\n", + pos, (unsigned long long)l64); + goto out; + } + } + + region.start = l64; + region.end = l64 + sz64 - 1; + + pcibios_bus_to_resource(bus, res, ®ion); + pcibios_resource_to_bus(bus, &inverted_region, res); + + /* + * If "A" is a BAR value (a bus address), "bus_to_resource(A)" is + * the corresponding resource address (the physical address used by + * the CPU. Converting that resource address back to a bus address + * should yield the original BAR value: + * + * resource_to_bus(bus_to_resource(A)) == A + * + * If it doesn't, CPU accesses to "bus_to_resource(A)" will not + * be claimed by the device. + */ + if (inverted_region.start != region.start) { + res->flags |= IORESOURCE_UNSET; + res->start = 0; + res->end = region.end - region.start; + p2sb_info(bus, devfn, "reg 0x%x: initial BAR value %#010llx invalid\n", + pos, (unsigned long long)region.start); + } + + goto out; + +fail: + res->flags = 0; +out: + if (res->flags) + p2sb_info(bus, devfn, "reg 0x%x: %pR\n", pos, res); + + return (res->flags & IORESOURCE_MEM_64) ? 1 : 0; +} + +/** + * p2sb_bar - Get Primary to Sideband (P2SB) bridge device BAR + * @bus: PCI bus to communicate with + * @devfn: PCI slot and function to communicate with + * @mem: memory resource to be filled in + * + * The BIOS prevents the P2SB device from being enumerated by the PCI + * subsystem, so we need to unhide and hide it back to lookup the BAR. + * + * if @bus is NULL, the bus 0 in domain 0 will be in use. + * If @devfn is 0, it will be replaced by devfn of the P2SB device. + * + * Caller must provide a valid pointer to @mem. + * + * Locking is handled by pci_rescan_remove_lock mutex. + * + * Return: + * 0 on success or appropriate errno value on error. + */ +int p2sb_bar(struct pci_bus *bus, unsigned int devfn, struct resource *mem) +{ + unsigned int devfn_p2sb; + u32 value = P2SBC_HIDE; + int ret; + + /* Get devfn for P2SB device itself */ + ret = p2sb_get_devfn(&devfn_p2sb); + if (ret) + return ret; + + /* if @pdev is NULL, use bus 0 in domain 0 */ + bus = bus ?: pci_find_bus(0, 0); + + /* If @devfn is 0, replace it with devfn of P2SB device itself */ + devfn = devfn ?: devfn_p2sb; + + pci_lock_rescan_remove(); + + /* Unhide the P2SB device, if needed */ + pci_bus_read_config_dword(bus, devfn_p2sb, P2SBC, &value); + if ((value & P2SBC_HIDE) == P2SBC_HIDE) + pci_bus_write_config_dword(bus, devfn_p2sb, P2SBC, 0); + + /* Read the first BAR of the device in question */ + __pci_bus_read_base(bus, devfn, mem, PCI_BASE_ADDRESS_0); + + /* Hide the P2SB device, if it was hidden */ + if (value & P2SBC_HIDE) + pci_bus_write_config_dword(bus, devfn_p2sb, P2SBC, P2SBC_HIDE); + + pci_unlock_rescan_remove(); + + if (mem->flags == 0) { + p2sb_err(bus, devfn, "Can't read BAR0: %pR\n", mem); + return -ENODEV; + } + + p2sb_info(bus, devfn, "BAR: %pR\n", mem); + return 0; +} +EXPORT_SYMBOL_GPL(p2sb_bar); diff --git a/include/linux/platform_data/x86/p2sb.h b/include/linux/platform_data/x86/p2sb.h new file mode 100644 index 000000000000..2f71de65aee4 --- /dev/null +++ b/include/linux/platform_data/x86/p2sb.h @@ -0,0 +1,27 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Primary to Sideband (P2SB) bridge access support + */ + +#ifndef _PLATFORM_DATA_X86_P2SB_H +#define _PLATFORM_DATA_X86_P2SB_H + +#include <linux/errno.h> + +struct pci_bus; +struct resource; + +#if IS_BUILTIN(CONFIG_P2SB) + +int p2sb_bar(struct pci_bus *bus, unsigned int devfn, struct resource *mem); + +#else /* CONFIG_P2SB */ + +static inline int p2sb_bar(struct pci_bus *bus, unsigned int devfn, struct resource *mem) +{ + return -ENODEV; +} + +#endif /* CONFIG_P2SB is not set */ + +#endif /* _PLATFORM_DATA_X86_P2SB_H */ -- 2.34.1
