Linux Kernel I2C

• Thread Index

• Re: [PATCH v8 5/8] i2c: of-prober: Add simple helpers for regulator support
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v8 4/8] i2c: Introduce OF component probe function
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v8 7/8] platform/chrome: Introduce device tree hardware prober
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH v8 5/8] i2c: of-prober: Add simple helpers for regulator support
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH v1 1/2] dt-bindings: i2c: spacemit: add support for K1 SoC
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH v1 1/5] dt-bindings: dmaengine: qcom: gpi: Add additional arg to dma-cell property
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 5.10 000/518] 5.10.227-rc1 review
  • From: Naresh Kamboju <naresh.kamboju@xxxxxxxxxx>
• Re: [PATCH v1 2/5] arm64: dts: qcom: Add support for configuring channel TRE size
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v1 1/5] dt-bindings: dmaengine: qcom: gpi: Add additional arg to dma-cell property
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v1 1/5] dt-bindings: dmaengine: qcom: gpi: Add additional arg to dma-cell property
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [PATCH v8 7/8] platform/chrome: Introduce device tree hardware prober
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v8 7/8] platform/chrome: Introduce device tree hardware prober
  • From: Chen-Yu Tsai <wenst@xxxxxxxxxxxx>
• [PATCH v1 5/5] i2c: i2c-qcom-geni: Add Block event interrupt support
  • From: Jyothi Kumar Seerapu <quic_jseerapu@xxxxxxxxxxx>
• [PATCH v1 4/5] dmaengine: qcom: gpi: Add GPI Block event interrupt support
  • From: Jyothi Kumar Seerapu <quic_jseerapu@xxxxxxxxxxx>
• [PATCH v1 3/5] dmaengine: qcom: gpi: Add provision to support TRE size as the fourth argument of dma-cells property
  • From: Jyothi Kumar Seerapu <quic_jseerapu@xxxxxxxxxxx>
• [PATCH v1 2/5] arm64: dts: qcom: Add support for configuring channel TRE size
  • From: Jyothi Kumar Seerapu <quic_jseerapu@xxxxxxxxxxx>
• [PATCH v1 1/5] dt-bindings: dmaengine: qcom: gpi: Add additional arg to dma-cell property
  • From: Jyothi Kumar Seerapu <quic_jseerapu@xxxxxxxxxxx>
• [PATCH v1 0/5] Add Block event interrupt support for I2C protocol
  • From: Jyothi Kumar Seerapu <quic_jseerapu@xxxxxxxxxxx>
• Re: [PATCH v8 6/8] i2c: of-prober: Add GPIO support to simple helpers
  • From: Chen-Yu Tsai <wenst@xxxxxxxxxxxx>
• Re: Wrong piix4_smbus address / slow trackpoint on Thinkpad P14s gen 2 (AMD)
  • From: Shyam Sundar S K <Shyam-sundar.S-k@xxxxxxx>
• Re: [PATCH v2] i2c: Drop legacy muxing pseudo-drivers
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH v8 7/8] platform/chrome: Introduce device tree hardware prober
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v8 6/8] i2c: of-prober: Add GPIO support to simple helpers
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v8 6/8] i2c: of-prober: Add GPIO support to simple helpers
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v1 1/2] dt-bindings: i2c: spacemit: add support for K1 SoC
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [PATCH v1 2/2] i2c: spacemit: add support for SpacemiT K1 SoC
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v1 2/2] i2c: spacemit: add support for SpacemiT K1 SoC
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v1 2/2] i2c: spacemit: add support for SpacemiT K1 SoC
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v1 1/2] dt-bindings: i2c: spacemit: add support for K1 SoC
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v1 2/2] i2c: spacemit: add support for SpacemiT K1 SoC
  • From: Troy Mitchell <troymitchell988@xxxxxxxxx>
• [PATCH v1 1/2] dt-bindings: i2c: spacemit: add support for K1 SoC
  • From: Troy Mitchell <troymitchell988@xxxxxxxxx>
• [PATCH v1 0/2] riscv: spacemit: add i2c support to K1 SoC
  • From: Troy Mitchell <troymitchell988@xxxxxxxxx>
• Re: [PATCH v8 7/8] platform/chrome: Introduce device tree hardware prober
  • From: Chen-Yu Tsai <wenst@xxxxxxxxxxxx>
• Re: [PATCH v8 7/8] platform/chrome: Introduce device tree hardware prober
  • From: Chen-Yu Tsai <wenst@xxxxxxxxxxxx>
• Re: [PATCH v8 6/8] i2c: of-prober: Add GPIO support to simple helpers
  • From: Chen-Yu Tsai <wenst@xxxxxxxxxxxx>
• Re: [PATCH v8 6/8] i2c: of-prober: Add GPIO support to simple helpers
  • From: Chen-Yu Tsai <wenst@xxxxxxxxxxxx>
• Re: [PATCH v8 4/8] i2c: Introduce OF component probe function
  • From: Chen-Yu Tsai <wenst@xxxxxxxxxxxx>
• Re: [PATCH v3 4/4] i2c: i2c-qcom-geni: Enable i2c controller sharing between two subsystems
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH v3 2/4] dma: gpi: Add Lock and Unlock TRE support to access SE exclusively
  • From: Vinod Koul <vkoul@xxxxxxxxxx>
• Re: Wrong piix4_smbus address / slow trackpoint on Thinkpad P14s gen 2 (AMD)
  • From: Miroslav Bendík <miroslav.bendik@xxxxxxxxx>
• Re: Wrong piix4_smbus address / slow trackpoint on Thinkpad P14s gen 2 (AMD)
  • From: Shyam Sundar S K <Shyam-sundar.S-k@xxxxxxx>
• [PATCH v5 3/3] i2c: imx: prevent rescheduling in non dma mode
  • From: Stefan Eichenberger <eichest@xxxxxxxxx>
• [PATCH v5 2/3] i2c: imx: separate atomic, dma and non-dma use case
  • From: Stefan Eichenberger <eichest@xxxxxxxxx>
• [PATCH v5 1/3] i2c: imx: do not poll for bus busy in single master mode
  • From: Stefan Eichenberger <eichest@xxxxxxxxx>
• [PATCH v5 0/3] i2c: imx: prevent rescheduling in non-dma mode
  • From: Stefan Eichenberger <eichest@xxxxxxxxx>
• Re: [PATCH v8 7/8] platform/chrome: Introduce device tree hardware prober
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v8 7/8] platform/chrome: Introduce device tree hardware prober
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v8 6/8] i2c: of-prober: Add GPIO support to simple helpers
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v8 4/8] i2c: Introduce OF component probe function
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v6 4/4] i2c: npcm: Enable slave in eob interrupt
  • From: Tyrone Ting <warp5tw@xxxxxxxxx>
• Re: [PATCH v8 7/8] platform/chrome: Introduce device tree hardware prober
  • From: Chen-Yu Tsai <wenst@xxxxxxxxxxxx>
• Re: [PATCH v8 7/8] platform/chrome: Introduce device tree hardware prober
  • From: Chen-Yu Tsai <wenst@xxxxxxxxxxxx>
• Re: [PATCH v8 6/8] i2c: of-prober: Add GPIO support to simple helpers
  • From: Chen-Yu Tsai <wenst@xxxxxxxxxxxx>
• Re: [PATCH v8 4/8] i2c: Introduce OF component probe function
  • From: Chen-Yu Tsai <wenst@xxxxxxxxxxxx>
• Re: [PATCH] fixup! i2c: Add driver for the RTL9300 I2C controller
  • From: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
• Re: Wrong piix4_smbus address / slow trackpoint on Thinkpad P14s gen 2 (AMD)
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: Wrong piix4_smbus address / slow trackpoint on Thinkpad P14s gen 2 (AMD)
  • From: Miroslav Bendík <miroslav.bendik@xxxxxxxxx>
• Re: [PATCH v2] i2c: i2c-qcom-geni: Serve transfer during early resume stage
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v2] i2c: i2c-qcom-geni: Serve transfer during early resume stage
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: (subset) [PATCH v4 0/9] Add device tree for ArmSoM Sige 5 board
  • From: Heiko Stuebner <heiko@xxxxxxxxx>
• Re: [PATCH v2] i2c: i2c-qcom-geni: Serve transfer during early resume stage
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxxxxxxxx>
• Re: [PATCH v6 2/4] i2c: npcm: Modify the client address assignment
  • From: Tyrone Ting <warp5tw@xxxxxxxxx>
• Re: [PATCH v6 2/4] i2c: npcm: Modify the client address assignment
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v6 2/4] i2c: npcm: Modify the client address assignment
  • From: Tyrone Ting <warp5tw@xxxxxxxxx>
• [PATCH v2] i2c: i2c-qcom-geni: Serve transfer during early resume stage
  • From: Mukesh Kumar Savaliya <quic_msavaliy@xxxxxxxxxxx>
• Re: [PATCH v1] i2c: i2c-qcom-geni: Serve transfer during early resume stage
  • From: Mukesh Kumar Savaliya <quic_msavaliy@xxxxxxxxxxx>
• Re: [PATCH v6 4/4] i2c: npcm: Enable slave in eob interrupt
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v6 2/4] i2c: npcm: Modify the client address assignment
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH 2/2] i2c: xiic: Add atomic transfer support
  • From: Manikanta Guntupalli <manikanta.guntupalli@xxxxxxx>
• [PATCH 1/2] i2c: xiic: Relocate xiic_i2c_runtime_suspend and xiic_i2c_runtime_resume to facilitate atomic mode
  • From: Manikanta Guntupalli <manikanta.guntupalli@xxxxxxx>
• [PATCH 0/2] Add atomic transfer support to i2c-xiic
  • From: Manikanta Guntupalli <manikanta.guntupalli@xxxxxxx>
• i2c-tools 4.4 has been released
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH 1/1] MAINTAINERS: Add an entry for the LJCA drivers
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• [PATCH 1/1] MAINTAINERS: Add an entry for the LJCA drivers
  • From: Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxx>
• [PATCH v6 4/4] i2c: npcm: Enable slave in eob interrupt
  • From: Tyrone Ting <warp5tw@xxxxxxxxx>
• [PATCH v6 3/4] i2c: npcm: use i2c frequency table
  • From: Tyrone Ting <warp5tw@xxxxxxxxx>
• [PATCH v6 2/4] i2c: npcm: Modify the client address assignment
  • From: Tyrone Ting <warp5tw@xxxxxxxxx>
• [PATCH v6 1/4] i2c: npcm: Modify timeout evaluation mechanism
  • From: Tyrone Ting <warp5tw@xxxxxxxxx>
• [PATCH v6 0/4] i2c: npcm: read/write operation, checkpatch
  • From: Tyrone Ting <warp5tw@xxxxxxxxx>
• RE: [PATCH v14 2/3] i2c: aspeed: support AST2600 i2c new register mode driver
  • From: Ryan Chen <ryan_chen@xxxxxxxxxxxxxx>
• Re: Wrong piix4_smbus address / slow trackpoint on Thinkpad P14s gen 2 (AMD)
  • From: Mario Limonciello <mario.limonciello@xxxxxxx>
• Re: [PATCH v8 7/8] platform/chrome: Introduce device tree hardware prober
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v8 7/8] platform/chrome: Introduce device tree hardware prober
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v8 6/8] i2c: of-prober: Add GPIO support to simple helpers
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v8 4/8] i2c: Introduce OF component probe function
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v14 2/3] i2c: aspeed: support AST2600 i2c new register mode driver
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [GIT PULL] Immutable branch between MFD, GPIO, I2C and Watchdog due for the v6.13 merge window
  • From: Lee Jones <lee@xxxxxxxxxx>
• [PATCH v10 2/2] i2c: octeon: Add block-mode i2c operations
  • From: Aryan Srivastava <aryan.srivastava@xxxxxxxxxxxxxxxxxxx>
• [PATCH v10 1/2] i2c: octeon: refactor common i2c operations
  • From: Aryan Srivastava <aryan.srivastava@xxxxxxxxxxxxxxxxxxx>
• [PATCH v10 0/2] i2c: octeon: Add block-mode r/w
  • From: Aryan Srivastava <aryan.srivastava@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v9 1/2] i2c: octeon: refactor common i2c operations
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v3 2/6] dt-bindings: i2c: nomadik: support 400kHz < clock-frequency <= 3.4MHz
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [PATCH v3 1/6] dt-bindings: i2c: nomadik: add mobileye,eyeq6h-i2c bindings
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [PATCH v3 5/6] i2c: nomadik: fix BRCR computation
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v3 0/5] Congatec Board Controller drivers
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v3 0/5] Congatec Board Controller drivers
  • From: Lee Jones <lee@xxxxxxxxxx>
• [PATCH v3 6/6] i2c: nomadik: support >=1MHz speed modes
  • From: Théo Lebrun <theo.lebrun@xxxxxxxxxxx>
• [PATCH v3 5/6] i2c: nomadik: fix BRCR computation
  • From: Théo Lebrun <theo.lebrun@xxxxxxxxxxx>
• [PATCH v3 4/6] i2c: nomadik: support Mobileye EyeQ6H I2C controller
  • From: Théo Lebrun <theo.lebrun@xxxxxxxxxxx>
• [PATCH v3 3/6] i2c: nomadik: switch from of_device_is_compatible() to of_match_device()
  • From: Théo Lebrun <theo.lebrun@xxxxxxxxxxx>
• [PATCH v3 2/6] dt-bindings: i2c: nomadik: support 400kHz < clock-frequency <= 3.4MHz
  • From: Théo Lebrun <theo.lebrun@xxxxxxxxxxx>
• [PATCH v3 0/6] i2c: nomadik: support >=1MHz & Mobileye EyeQ6H platform
  • From: Théo Lebrun <theo.lebrun@xxxxxxxxxxx>
• [PATCH v3 1/6] dt-bindings: i2c: nomadik: add mobileye,eyeq6h-i2c bindings
  • From: Théo Lebrun <theo.lebrun@xxxxxxxxxxx>
• Re: [PATCH v2 5/6] i2c: nomadik: fix BRCR computation
  • From: Théo Lebrun <theo.lebrun@xxxxxxxxxxx>
• Re: [PATCH 00/51] treewide: Switch to __pm_runtime_put_autosuspend()
  • From: "Rafael J. Wysocki" <rafael@xxxxxxxxxx>
• Re: [PATCH v2 5/6] i2c: nomadik: fix BRCR computation
  • From: Théo Lebrun <theo.lebrun@xxxxxxxxxxx>
• Re: [PATCH 00/51] treewide: Switch to __pm_runtime_put_autosuspend()
  • From: Richard Fitzgerald <rf@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 6/6] i2c: nomadik: support >=1MHz speed modes
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v2 5/6] i2c: nomadik: fix BRCR computation
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v2 4/6] i2c: nomadik: support Mobileye EyeQ6H I2C controller
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v2 3/6] i2c: nomadik: switch from of_device_is_compatible() to of_match_device()
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v2 2/6] dt-bindings: i2c: nomadik: support 400kHz < clock-frequency <= 3.4MHz
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v2 1/6] dt-bindings: i2c: nomadik: add mobileye,eyeq6h-i2c bindings
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 00/51] treewide: Switch to __pm_runtime_put_autosuspend()
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH 2/4] i2c: nomadik: support Mobileye EyeQ6H I2C controller
  • From: Théo Lebrun <theo.lebrun@xxxxxxxxxxx>
• [PATCH v2 4/6] i2c: nomadik: support Mobileye EyeQ6H I2C controller
  • From: Théo Lebrun <theo.lebrun@xxxxxxxxxxx>
• [PATCH v2 3/6] i2c: nomadik: switch from of_device_is_compatible() to of_match_device()
  • From: Théo Lebrun <theo.lebrun@xxxxxxxxxxx>
• [PATCH v2 6/6] i2c: nomadik: support >=1MHz speed modes
  • From: Théo Lebrun <theo.lebrun@xxxxxxxxxxx>
• [PATCH v2 5/6] i2c: nomadik: fix BRCR computation
  • From: Théo Lebrun <theo.lebrun@xxxxxxxxxxx>
• [PATCH v2 2/6] dt-bindings: i2c: nomadik: support 400kHz < clock-frequency <= 3.4MHz
  • From: Théo Lebrun <theo.lebrun@xxxxxxxxxxx>
• [PATCH v2 1/6] dt-bindings: i2c: nomadik: add mobileye,eyeq6h-i2c bindings
  • From: Théo Lebrun <theo.lebrun@xxxxxxxxxxx>
• [PATCH v2 0/6] i2c: nomadik: support >=1MHz & Mobileye EyeQ6H platform
  • From: Théo Lebrun <theo.lebrun@xxxxxxxxxxx>
• Re: [PATCH 00/51] treewide: Switch to __pm_runtime_put_autosuspend()
  • From: "Rafael J. Wysocki" <rafael@xxxxxxxxxx>
• Re: [PATCH v5 3/6] i2c: npcm: Modify timeout evaluation mechanism
  • From: Tyrone Ting <warp5tw@xxxxxxxxx>
• Re: [PATCH v5 4/6] i2c: npcm: Modify the client address assignment
  • From: Tyrone Ting <warp5tw@xxxxxxxxx>
• Re: [PATCH 00/51] treewide: Switch to __pm_runtime_put_autosuspend()
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxx>
• Re: [PATCH 00/51] treewide: Switch to __pm_runtime_put_autosuspend()
  • From: "Rafael J. Wysocki" <rafael@xxxxxxxxxx>
• Re: [PATCH v5 4/6] i2c: npcm: Modify the client address assignment
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH] i2c: qup: use generic device property accessors
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH 2/4] i2c: nomadik: support Mobileye EyeQ6H I2C controller
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 2/4] i2c: nomadik: support Mobileye EyeQ6H I2C controller
  • From: Théo Lebrun <theo.lebrun@xxxxxxxxxxx>
• Re: [PATCH 2/4] i2c: nomadik: support Mobileye EyeQ6H I2C controller
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 1/4] dt-bindings: i2c: nomadik: add mobileye,eyeq6h-i2c bindings
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v2 0/4] i2c: Replace lists of special clients with flagging of such clients
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• Re: [PATCH v2 4/4] i2c: core: Remove obsolete members of i2c_adapter and i2c_client
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH 4/4] i2c: nomadik: support >=1MHz speed modes
  • From: Théo Lebrun <theo.lebrun@xxxxxxxxxxx>
• [PATCH 1/4] dt-bindings: i2c: nomadik: add mobileye,eyeq6h-i2c bindings
  • From: Théo Lebrun <theo.lebrun@xxxxxxxxxxx>
• [PATCH 2/4] i2c: nomadik: support Mobileye EyeQ6H I2C controller
  • From: Théo Lebrun <theo.lebrun@xxxxxxxxxxx>
• [PATCH 3/4] i2c: nomadik: fix BRCR computation
  • From: Théo Lebrun <theo.lebrun@xxxxxxxxxxx>
• [PATCH 0/4] i2c: nomadik: support >=1MHz & Mobileye EyeQ6H platform
  • From: Théo Lebrun <theo.lebrun@xxxxxxxxxxx>
• Re: [PATCH v2 2/4] i2c: Replace list-based mechanism for handling auto-detected clients
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 4/4] i2c: core: Remove obsolete members of i2c_adapter and i2c_client
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 3/4] i2c: Replace list-based mechanism for handling userspace-created clients
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/4] i2c: Replace list-based mechanism for handling auto-detected clients
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 0/4] i2c: Replace lists of special clients with flagging of such clients
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v8 3/8] i2c: core: Remove extra space in Makefile
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: support gpio-binding for SMBAlerts
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: testunit: improve error handling for GPIO
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• [PATCH v8 8/8] arm64: dts: mediatek: mt8173-elm-hana: Mark touchscreens and trackpads as fail
  • From: Chen-Yu Tsai <wenst@xxxxxxxxxxxx>
• [PATCH v8 7/8] platform/chrome: Introduce device tree hardware prober
  • From: Chen-Yu Tsai <wenst@xxxxxxxxxxxx>
• [PATCH v8 6/8] i2c: of-prober: Add GPIO support to simple helpers
  • From: Chen-Yu Tsai <wenst@xxxxxxxxxxxx>
• [PATCH v8 5/8] i2c: of-prober: Add simple helpers for regulator support
  • From: Chen-Yu Tsai <wenst@xxxxxxxxxxxx>
• [PATCH v8 4/8] i2c: Introduce OF component probe function
  • From: Chen-Yu Tsai <wenst@xxxxxxxxxxxx>
• [PATCH v8 3/8] i2c: core: Remove extra space in Makefile
  • From: Chen-Yu Tsai <wenst@xxxxxxxxxxxx>
• [PATCH v8 2/8] of: base: Add for_each_child_of_node_with_prefix()
  • From: Chen-Yu Tsai <wenst@xxxxxxxxxxxx>
• [PATCH v8 1/8] of: dynamic: Add of_changeset_update_prop_string
  • From: Chen-Yu Tsai <wenst@xxxxxxxxxxxx>
• [PATCH v8 0/8] platform/chrome: Introduce DT hardware prober
  • From: Chen-Yu Tsai <wenst@xxxxxxxxxxxx>
• Re: [PATCH V4] i2c: imx-lpi2c: add target mode support
  • From: Carlos Song <carlos.song@xxxxxxx>
• Re: [PATCH v5 4/6] i2c: npcm: Modify the client address assignment
  • From: Tyrone Ting <warp5tw@xxxxxxxxx>
• Re: [PATCH 00/51] treewide: Switch to __pm_runtime_put_autosuspend()
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH 00/51] treewide: Switch to __pm_runtime_put_autosuspend()
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH 00/51] treewide: Switch to __pm_runtime_put_autosuspend()
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• [PATCH 3/3] i2c: i801: Use MMIO if available
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH 2/3] i2c: i801: Switch to iomapped register access
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH 1/3] i2c: i801: Cosmetic improvements
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH 0/3] i2c: i801: Use MMIO if available
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• Re: [PATCH 00/51] treewide: Switch to __pm_runtime_put_autosuspend()
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• [PATCH v15 3/3] i2c: aspeed: support AST2600 i2c new register target mode driver
  • From: Ryan Chen <ryan_chen@xxxxxxxxxxxxxx>
• [PATCH v15 2/3] i2c: aspeed: support AST2600 i2c new register mode driver
  • From: Ryan Chen <ryan_chen@xxxxxxxxxxxxxx>
• [PATCH v15 1/3] dt-bindings: i2c: aspeed: support for AST2600-i2cv2
  • From: Ryan Chen <ryan_chen@xxxxxxxxxxxxxx>
• [PATCH v15 0/3] Add ASPEED AST2600 I2Cv2 controller driver
  • From: Ryan Chen <ryan_chen@xxxxxxxxxxxxxx>
• [PATCH v9 2/2] i2c: octeon: Add block-mode i2c operations
  • From: Aryan Srivastava <aryan.srivastava@xxxxxxxxxxxxxxxxxxx>
• [PATCH v9 1/2] i2c: octeon: refactor common i2c operations
  • From: Aryan Srivastava <aryan.srivastava@xxxxxxxxxxxxxxxxxxx>
• [PATCH v9 0/2] i2c: octeon: Add block-mode r/w
  • From: Aryan Srivastava <aryan.srivastava@xxxxxxxxxxxxxxxxxxx>
• Re: [PULL REQUEST] i2c-for-6.12-rc2
  • From: pr-tracker-bot@xxxxxxxxxx
• Re: [PATCH v14 2/3] i2c: aspeed: support AST2600 i2c new register mode driver
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v14 2/3] i2c: aspeed: support AST2600 i2c new register mode driver
  • From: kernel test robot <lkp@xxxxxxxxx>
• [PULL REQUEST] i2c-for-6.12-rc2
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [GIT PULL] i2c-host-fixes for v6.12-rc2
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• [PATCH AUTOSEL 4.19 10/16] i2c: i801: Use a different adapter-name for IDF adapters
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.4 12/21] i2c: i801: Use a different adapter-name for IDF adapters
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.10 15/26] i2c: i801: Use a different adapter-name for IDF adapters
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.15 18/31] i2c: i801: Use a different adapter-name for IDF adapters
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.1 19/42] i2c: i801: Use a different adapter-name for IDF adapters
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.6 25/58] i2c: i801: Use a different adapter-name for IDF adapters
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.10 27/70] i2c: i801: Use a different adapter-name for IDF adapters
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.11 28/76] i2c: i801: Use a different adapter-name for IDF adapters
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• Re: [PATCH 00/51] treewide: Switch to __pm_runtime_put_autosuspend()
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• [GIT PULL] i2c-host-fixes for v6.12-rc2
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• [PATCH 16/51] i2c: Switch to __pm_runtime_put_autosuspend()
  • From: Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxx>
• [PATCH 00/51] treewide: Switch to __pm_runtime_put_autosuspend()
  • From: Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxx>
• RE: [PATCH v14 0/3] Add ASPEED AST2600 I2Cv2 controller driver
  • From: Ryan Chen <ryan_chen@xxxxxxxxxxxxxx>
• Re: [PATCH v5 4/6] i2c: npcm: Modify the client address assignment
  • From: Tyrone Ting <warp5tw@xxxxxxxxx>
• Re: [PATCH v5 5/6] i2c: npcm: use i2c frequency table
  • From: Tyrone Ting <warp5tw@xxxxxxxxx>
• Re: [PATCH v5 4/6] i2c: npcm: Modify the client address assignment
  • From: Tyrone Ting <warp5tw@xxxxxxxxx>
• Re: [PATCH v5 0/6] i2c: npcm: read/write operation, checkpatch
  • From: Tyrone Ting <warp5tw@xxxxxxxxx>
• Re: [PATCH v4 2/2] i2c: dwsignware: determine HS tHIGH and tLOW based on HW parameters
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH v4 1/2] dt-bindings: i2c: snps,designware-i2c: declare bus capacitance and clk freq optimized
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v2 0/2] i2c: Add ACPI support for HJMC01
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH v14 0/3] Add ASPEED AST2600 I2Cv2 controller driver
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v14 0/3] Add ASPEED AST2600 I2Cv2 controller driver
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH v8 2/2] i2c: octeon: Add block-mode i2c operations
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH v4 2/2] i2c: dwsignware: determine HS tHIGH and tLOW based on HW parameters
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v4 2/2] i2c: dwsignware: determine HS tHIGH and tLOW based on HW parameters
  • From: Michael Wu <michael.wu@xxxxxxxxx>
• [PATCH v4 1/2] dt-bindings: i2c: snps,designware-i2c: declare bus capacitance and clk freq optimized
  • From: Michael Wu <michael.wu@xxxxxxxxx>
• [PATCH v4 0/2] Compute HS HCNT and LCNT based on HW parameters
  • From: Michael Wu <michael.wu@xxxxxxxxx>
• Re: [PATCH v14 0/3] Add ASPEED AST2600 I2Cv2 controller driver
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/1] i2c: qcom-geni: Support systems with 32MHz serial engine clock
  • From: Vladimir Zapolskiy <vladimir.zapolskiy@xxxxxxxxxx>
• RE: [PATCH v14 0/3] Add ASPEED AST2600 I2Cv2 controller driver
  • From: Ryan Chen <ryan_chen@xxxxxxxxxxxxxx>
• Re: [PATCH v1 1/2] i2c: designware: constify abort_sources
  • From: Raag Jadav <raag.jadav@xxxxxxxxx>
• Re: [PATCH v2 1/2] ACPI: APD: Add clock frequency for HJMC01 I2C controller
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH V4] i2c: imx-lpi2c: add target mode support
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: 回收: [PATCH v3 1/2] dt-bindings: i2c: snps,designware-i2c: declare bus capacitance and clk freq optimized
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH v2] i2c: qcom-geni: Keep comment why interrupts start disabled
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH v4 1/4] i2c: imx: only poll for bus busy in multi master mode
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• Re: [PATCH v4 1/4] i2c: imx: only poll for bus busy in multi master mode
  • From: Stefan Eichenberger <eichest@xxxxxxxxx>
• Re: [PATCH v4 1/4] i2c: imx: only poll for bus busy in multi master mode
  • From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
• Re: [PATCH v4 3/4] i2c: imx: use readb_relaxed and writeb_relaxed
  • From: Stefan Eichenberger <eichest@xxxxxxxxx>
• Re: [PATCH v14 0/3] Add ASPEED AST2600 I2Cv2 controller driver
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 2/2] i2c: dwsignware: determine HS tHIGH and tLOW based on HW parameters
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 09/21] gpio: add driver for ADI ADSP-SC5xx platform
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v4 3/4] i2c: imx: use readb_relaxed and writeb_relaxed
  • From: "Arnd Bergmann" <arnd@xxxxxxxx>
• Re: [PATCH v4 3/4] i2c: imx: use readb_relaxed and writeb_relaxed
  • From: Stefan Eichenberger <eichest@xxxxxxxxx>
• Re: [PATCH v4 3/4] i2c: imx: use readb_relaxed and writeb_relaxed
  • From: "Arnd Bergmann" <arnd@xxxxxxxx>
• [PATCH v4 4/4] i2c: imx: prevent rescheduling in non dma mode
  • From: Stefan Eichenberger <eichest@xxxxxxxxx>
• [PATCH v4 3/4] i2c: imx: use readb_relaxed and writeb_relaxed
  • From: Stefan Eichenberger <eichest@xxxxxxxxx>
• [PATCH v4 2/4] i2c: imx: separate atomic, dma and non-dma use case
  • From: Stefan Eichenberger <eichest@xxxxxxxxx>
• [PATCH v4 1/4] i2c: imx: only poll for bus busy in multi master mode
  • From: Stefan Eichenberger <eichest@xxxxxxxxx>
• [PATCH v4 0/4] i2c: imx: prevent rescheduling in non-dma mode
  • From: Stefan Eichenberger <eichest@xxxxxxxxx>
• Re: [PATCH] fixup! i2c: Add driver for the RTL9300 I2C controller
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [linux][PATCH v2 10/20] dt-bindings: i2c: microchip: corei2c: Add PIC64GX as compatible with driver
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH 11/21] irqchip: Add irqchip for ADI ADSP-SC5xx platform
  • From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
• Re: [PATCH v3 1/2] dt-bindings: i2c: snps,designware-i2c: declare bus capacitance and clk freq optimized
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v3 1/2] dt-bindings: i2c: snps,designware-i2c: declare bus capacitance and clk freq optimized
  • From: Michael Wu <Michael.Wu@xxxxxxxxx>
• 回收: [PATCH v3 1/2] dt-bindings: i2c: snps,designware-i2c: declare bus capacitance and clk freq optimized
  • From: Michael Wu <Michael.Wu@xxxxxxxxx>
• RE: [PATCH v3 2/2] i2c: dwsignware: determine HS tHIGH and tLOW based on HW parameters
  • From: Michael Wu <Michael.Wu@xxxxxxxxx>
• [no subject]
  • From: Unknown
• Re: [PATCH v3 1/2] dt-bindings: i2c: snps,designware-i2c: declare bus capacitance and clk freq optimized
  • From: Michael Wu <Michael.Wu@xxxxxxxxx>
• Re: [PATCH v1 1/2] i2c: designware: constify abort_sources
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH] i2c: Switch back to struct platform_driver::remove()
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH v3 1/1] i2c: qcom-geni: Support systems with 32MHz serial engine clock
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH v5 0/7] Add SDM670 camera subsystem
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH v2 0/7] i2c: designware: Group all DesignWare drivers under a single option
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH v1] i2c: microchip-core: actually use repeated sends
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH v5 0/6] i2c: npcm: read/write operation, checkpatch
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• [PATCH v14 3/3] i2c: aspeed: support AST2600 i2c new register slave mode driver
  • From: Ryan Chen <ryan_chen@xxxxxxxxxxxxxx>
• [PATCH v14 2/3] i2c: aspeed: support AST2600 i2c new register mode driver
  • From: Ryan Chen <ryan_chen@xxxxxxxxxxxxxx>
• [PATCH v14 1/3] dt-bindings: i2c: aspeed: support for AST2600-i2cv2
  • From: Ryan Chen <ryan_chen@xxxxxxxxxxxxxx>
• [PATCH v14 0/3] Add ASPEED AST2600 I2Cv2 controller driver
  • From: Ryan Chen <ryan_chen@xxxxxxxxxxxxxx>
• Re: [PATCH v3 1/2] dt-bindings: i2c: snps,designware-i2c: declare bus capacitance and clk freq optimized
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH dt-schema] schemas: i2c: add optional GPIO binding for SMBALERT# line
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 09/21] gpio: add driver for ADI ADSP-SC5xx platform
  • From: Greg Malysa <greg.malysa@xxxxxxxxxxx>
• Re: [PATCH v3 2/5] gpio: Congatec Board Controller gpio driver
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH v2] i2c: qcom-geni: Keep comment why interrupts start disabled
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH v2] i2c: stm32f7: Do not prepare/unprepare clock during runtime suspend/resume
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• RE: [PATCH 09/21] gpio: add driver for ADI ADSP-SC5xx platform
  • From: "Artamonovs, Arturs" <Arturs.Artamonovs@xxxxxxxxxx>
• Re: [PATCH v2] i2c: amd-asf: Fix uninitialized variables issue in amd_asf_process_target
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH v5 5/6] i2c: npcm: use i2c frequency table
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v5 4/6] i2c: npcm: Modify the client address assignment
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v5 3/6] i2c: npcm: Modify timeout evaluation mechanism
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v1] i2c: microchip-core: actually use repeated sends
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH v3 2/2] i2c: dwsignware: determine HS tHIGH and tLOW based on HW parameters
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v1] i2c: microchip-core: actually use repeated sends
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH 09/21] gpio: add driver for ADI ADSP-SC5xx platform
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH v3 4/5] watchdog: Congatec Board Controller watchdog timer driver
  • From: Thomas Richard <thomas.richard@xxxxxxxxxxx>
• [PATCH v3 5/5] MAINTAINERS: Add entry for Congatec Board Controller
  • From: Thomas Richard <thomas.richard@xxxxxxxxxxx>
• [PATCH v3 3/5] i2c: Congatec Board Controller i2c bus driver
  • From: Thomas Richard <thomas.richard@xxxxxxxxxxx>
• [PATCH v3 2/5] gpio: Congatec Board Controller gpio driver
  • From: Thomas Richard <thomas.richard@xxxxxxxxxxx>
• [PATCH v3 1/5] mfd: add Congatec Board Controller mfd driver
  • From: Thomas Richard <thomas.richard@xxxxxxxxxxx>
• [PATCH v3 0/5] Congatec Board Controller drivers
  • From: Thomas Richard <thomas.richard@xxxxxxxxxxx>
• Re: [PATCH v2 0/7] i2c: designware: Group all DesignWare drivers under a single option
  • From: patchwork-bot+linux-riscv@xxxxxxxxxx
• Re: [PATCH v3 2/2] i2c: dwsignware: determine HS tHIGH and tLOW based on HW parameters
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH v1] i2c: microchip-core: actually use repeated sends
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH v5 4/7] dt-bindings: media: camss: Add qcom,sdm670-camss
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v2 3/5] i2c: Congatec Board Controller i2c bus driver
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH v5 4/7] dt-bindings: media: camss: Add qcom,sdm670-camss
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH v5 4/7] dt-bindings: media: camss: Add qcom,sdm670-camss
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v5 4/7] dt-bindings: media: camss: Add qcom,sdm670-camss
  • From: "Bryan O'Donoghue" <bryan.odonoghue@xxxxxxxxxx>
• Re: [PATCH v1] i2c: microchip-core: actually use repeated sends
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: Switch back to struct platform_driver::remove()
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• [PATCH v3 2/2] i2c: dwsignware: determine HS tHIGH and tLOW based on HW parameters
  • From: Michael Wu <michael.wu@xxxxxxxxx>
• [PATCH v3 1/2] dt-bindings: i2c: snps,designware-i2c: declare bus capacitance and clk freq optimized
  • From: Michael Wu <michael.wu@xxxxxxxxx>
• [PATCH v3 0/2] Compute HS HCNT and LCNT based on HW parameters
  • From: Michael Wu <michael.wu@xxxxxxxxx>
• Re: [PATCH v2 3/3] hwmon: (pmbus/tps25990): add initial support
  • From: Vaishnav Achath <vaishnav.a@xxxxxx>
• Re: [PATCH v5 4/7] dt-bindings: media: camss: Add qcom,sdm670-camss
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v5 2/7] dt-bindings: i2c: qcom-cci: Document SDM670 compatible
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v5 6/6] i2c: npcm: Enable slave in eob interrupt
  • From: Tyrone Ting <warp5tw@xxxxxxxxx>
• [PATCH v5 5/6] i2c: npcm: use i2c frequency table
  • From: Tyrone Ting <warp5tw@xxxxxxxxx>
• [PATCH v5 4/6] i2c: npcm: Modify the client address assignment
  • From: Tyrone Ting <warp5tw@xxxxxxxxx>
• [PATCH v5 3/6] i2c: npcm: Modify timeout evaluation mechanism
  • From: Tyrone Ting <warp5tw@xxxxxxxxx>
• [PATCH v5 2/6] i2c: npcm: use a software flag to indicate a BER condition
  • From: Tyrone Ting <warp5tw@xxxxxxxxx>
• [PATCH v5 1/6] i2c: npcm: correct the read/write operation procedure
  • From: Tyrone Ting <warp5tw@xxxxxxxxx>
• [PATCH v5 0/6] i2c: npcm: read/write operation, checkpatch
  • From: Tyrone Ting <warp5tw@xxxxxxxxx>
• Re: [PATCH v3 1/1] i2c: qcom-geni: Support systems with 32MHz serial engine clock
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH v3 4/4] i2c: i2c-qcom-geni: Enable i2c controller sharing between two subsystems
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• [PATCH v5 7/7] arm64: dts: qcom: sdm670: add camss and cci
  • From: Richard Acayan <mailingradian@xxxxxxxxx>
• [PATCH v5 6/7] arm64: dts: qcom: sdm670: add camcc
  • From: Richard Acayan <mailingradian@xxxxxxxxx>
• [PATCH v5 5/7] media: qcom: camss: add support for SDM670 camss
  • From: Richard Acayan <mailingradian@xxxxxxxxx>
• [PATCH v5 4/7] dt-bindings: media: camss: Add qcom,sdm670-camss
  • From: Richard Acayan <mailingradian@xxxxxxxxx>
• [PATCH v5 3/7] i2c: qcom-cci: Stop complaining about DT set clock rate
  • From: Richard Acayan <mailingradian@xxxxxxxxx>
• [PATCH v5 2/7] dt-bindings: i2c: qcom-cci: Document SDM670 compatible
  • From: Richard Acayan <mailingradian@xxxxxxxxx>
• [PATCH v5 1/7] dt-bindings: clock: qcom,sdm845-camcc: add sdm670 compatible
  • From: Richard Acayan <mailingradian@xxxxxxxxx>
• [PATCH v5 0/7] Add SDM670 camera subsystem
  • From: Richard Acayan <mailingradian@xxxxxxxxx>
• Re: [PATCH] i2c: stm32f7: Do not prepare/unprepare clock during runtime suspend/resume
  • From: Marek Vasut <marex@xxxxxxx>
• [PATCH v2] i2c: stm32f7: Do not prepare/unprepare clock during runtime suspend/resume
  • From: Marek Vasut <marex@xxxxxxx>
• Re: [PATCH] i2c: stm32f7: Do not prepare/unprepare clock during runtime suspend/resume
  • From: Alain Volmat <alain.volmat@xxxxxxxxxxx>
• [PATCH v3 1/1] i2c: qcom-geni: Support systems with 32MHz serial engine clock
  • From: Manikanta Mylavarapu <quic_mmanikan@xxxxxxxxxxx>
• Re: [PATCH v2 1/1] i2c: qcom-geni: Support systems with 32MHz serial engine clock
  • From: Manikanta Mylavarapu <quic_mmanikan@xxxxxxxxxxx>
• Re: [linux][PATCH v2 10/20] dt-bindings: i2c: microchip: corei2c: Add PIC64GX as compatible with driver
  • From: Conor Dooley <conor@xxxxxxxxxx>
• [PATCH v1] i2c: microchip-core: actually use repeated sends
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH v2 0/4] i2c: Replace lists of special clients with flagging of such clients
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH dt-schema] schemas: i2c: add optional GPIO binding for SMBALERT# line
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: (subset) [PATCH v8 0/8] Add tsd,mule-i2c-mux support
  • From: Heiko Stuebner <heiko@xxxxxxxxx>
• Re: [PATCH v2 0/4] i2c: Replace lists of special clients with flagging of such clients
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [linux][PATCH v2 10/20] dt-bindings: i2c: microchip: corei2c: Add PIC64GX as compatible with driver
  • From: <pierre-henry.moussay@xxxxxxxxxxxxx>
• Re: [PATCH v3 4/4] i2c: i2c-qcom-geni: Enable i2c controller sharing between two subsystems
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH v5 6/6] i2c: Add driver for the RTL9300 I2C controller
  • From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
• Re: [PATCH v5 6/6] i2c: Add driver for the RTL9300 I2C controller
  • From: Markus Elfring <Markus.Elfring@xxxxxx>
• Re: (subset) [PATCH v2 0/3] amlogic SoC's power-domains fixes
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• Re: [PATCH v2] i2c: amd-asf: Fix uninitialized variables issue in amd_asf_process_target
  • From: Shyam Sundar S K <Shyam-sundar.S-k@xxxxxxx>
• Re: [PATCH v3 4/4] i2c: i2c-qcom-geni: Enable i2c controller sharing between two subsystems
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH v3 3/4] soc: qcom: geni-se: Do not keep GPIOs to sleep state for shared SE usecase
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH v3 1/4] dt-bindindgs: i2c: qcom,i2c-geni: Document shared flag
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH v8 4/8] hwmon: (amc6821) add support for tsd,mule
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v8 3/8] dt-bindings: hwmon: add support for ti,amc6821
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v5 6/6] i2c: Add driver for the RTL9300 I2C controller
  • From: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
• [PATCH] fixup! i2c: Add driver for the RTL9300 I2C controller
  • From: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
• Re: [PULL REQUEST] i2c-for-6.12-rc1-additional_fixes
  • From: pr-tracker-bot@xxxxxxxxxx
• Re: [PATCH v5 6/6] i2c: Add driver for the RTL9300 I2C controller
  • From: Markus Elfring <Markus.Elfring@xxxxxx>
• [PULL REQUEST] i2c-for-6.12-rc1-additional_fixes
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• [PATCH] i2c: Switch back to struct platform_driver::remove()
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxx>
• Re: [PATCH v2 1/1] i2c: qcom-geni: Support systems with 32MHz serial engine clock
  • From: Manikanta Mylavarapu <quic_mmanikan@xxxxxxxxxxx>
• Re: [PATCH v2 1/1] i2c: qcom-geni: Support systems with 32MHz serial engine clock
  • From: Manikanta Mylavarapu <quic_mmanikan@xxxxxxxxxxx>
• Re: [PATCH v5 6/6] i2c: Add driver for the RTL9300 I2C controller
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v8 2/8] i2c: muxes: add support for tsd,mule-i2c multiplexer
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v8 2/8] i2c: muxes: add support for tsd,mule-i2c multiplexer
  • From: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
• Re: [PATCH v8 3/8] dt-bindings: hwmon: add support for ti,amc6821
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v4 0/7] Add SDM670 camera subsystem
  • From: Vladimir Zapolskiy <vladimir.zapolskiy@xxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: i2c: snps,designware-i2c: add bus-capacitance-pf and clk-freq-optimized
  • From: Michael Wu <Michael.Wu@xxxxxxxxx>
• [PATCH] i2c: stm32f7: Do not prepare/unprepare clock during runtime suspend/resume
  • From: Marek Vasut <marex@xxxxxxx>
• Re: [PATCH v4 0/7] Add SDM670 camera subsystem
  • From: Richard Acayan <mailingradian@xxxxxxxxx>
• [GIT PULL v2] i2c-host-fixes for v6.12-rc1
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [GIT PULL] i2c-host-fixes for v6.12-rc1
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [GIT PULL] i2c-host-fixes for v6.12-rc1
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxx>
• Re: [PATCH v8 3/8] dt-bindings: hwmon: add support for ti,amc6821
  • From: Farouk Bouabid <farouk.bouabid@xxxxxxxxx>
• Re: [PATCH 1/2] i2c: designware: determine HS tHIGH and tLOW based on HW paramters
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v2] i2c: amd-asf: Fix uninitialized variables issue in amd_asf_process_target
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH] i2c: i2c-qcom-geni: Serve transfer during early resume stage
  • From: Mukesh Kumar Savaliya <quic_msavaliy@xxxxxxxxxxx>
• Re: [PATCH] i2c: i2c-qcom-geni: Serve transfer during early resume stage
  • From: Mukesh Kumar Savaliya <quic_msavaliy@xxxxxxxxxxx>
• Re: [PATCH v3 1/4] dt-bindindgs: i2c: qcom,i2c-geni: Document shared flag
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v3 1/4] dt-bindindgs: i2c: qcom,i2c-geni: Document shared flag
  • From: Konrad Dybcio <konradybcio@xxxxxxxxxx>
• Re: [PATCH] i2c: amd-asf: Fix uninitialized variables issue in amd_asf_process_target
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• [GIT PULL] i2c-host-fixes for v6.12-rc1
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH v3 1/4] dt-bindindgs: i2c: qcom,i2c-geni: Document shared flag
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v2 2/2] i2c: dwsignware: determine HS tHIGH and tLOW based on HW parameters
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v3 1/4] dt-bindindgs: i2c: qcom,i2c-geni: Document shared flag
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v2 2/2] i2c: dwsignware: determine HS tHIGH and tLOW based on HW parameters
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: i2c: snps,designware-i2c: add bus-capacitance-pf and clk-freq-optimized
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH v3 4/4] i2c: i2c-qcom-geni: Enable i2c controller sharing between two subsystems
  • From: Mukesh Kumar Savaliya <quic_msavaliy@xxxxxxxxxxx>
• [PATCH v3 3/4] soc: qcom: geni-se: Do not keep GPIOs to sleep state for shared SE usecase
  • From: Mukesh Kumar Savaliya <quic_msavaliy@xxxxxxxxxxx>
• [PATCH v3 2/4] dma: gpi: Add Lock and Unlock TRE support to access SE exclusively
  • From: Mukesh Kumar Savaliya <quic_msavaliy@xxxxxxxxxxx>
• [PATCH v3 0/4] Enable shared SE support over I2C
  • From: Mukesh Kumar Savaliya <quic_msavaliy@xxxxxxxxxxx>
• [PATCH v3 1/4] dt-bindindgs: i2c: qcom,i2c-geni: Document shared flag
  • From: Mukesh Kumar Savaliya <quic_msavaliy@xxxxxxxxxxx>
• [PATCH v2 2/2] i2c: dwsignware: determine HS tHIGH and tLOW based on HW parameters
  • From: Michael Wu <michael.wu@xxxxxxxxx>
• [PATCH v2 1/2] dt-bindings: i2c: snps,designware-i2c: add bus-capacitance-pf and clk-freq-optimized
  • From: Michael Wu <michael.wu@xxxxxxxxx>
• [PATCH v2 0/2] Compute HS HCNT and LCNT based on HW parameters
  • From: Michael Wu <michael.wu@xxxxxxxxx>
• Re: [PATCH v4 3/6] i2c: npcm: Modify timeout evaluation mechanism
  • From: Tyrone Ting <warp5tw@xxxxxxxxx>
• Re: [PATCH v4 2/6] i2c: npcm: use a software flag to indicate a BER condition
  • From: Tyrone Ting <warp5tw@xxxxxxxxx>
• Re: [PATCH v4 1/6] i2c: npcm: correct the read/write operation procedure
  • From: Tyrone Ting <warp5tw@xxxxxxxxx>
• [PATCH v5] fixup! i2c: Add driver for the RTL9300 I2C controller
  • From: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v5 5/6] mips: dts: realtek: Add I2C controllers
  • From: Chris Packham <Chris.Packham@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v1 0/5] i2c: designware: Cleanups (part 4)
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH 1/2] i2c: designware: determine HS tHIGH and tLOW based on HW paramters
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] i2c: designware: determine HS tHIGH and tLOW based on HW paramters
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v2 1/1] i2c: qcom-geni: Support systems with 32MHz serial engine clock
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH v2 1/1] i2c: qcom-geni: Support systems with 32MHz serial engine clock
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH 1/2] i2c: designware: determine HS tHIGH and tLOW based on HW paramters
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 0/2] i2c: Add ACPI support for HJMC01
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/1] i2c: qcom-geni: Support systems with 32MHz serial engine clock
  • From: Vladimir Zapolskiy <vladimir.zapolskiy@xxxxxxxxxx>
• RE: [PATCH 1/2] i2c: designware: determine HS tHIGH and tLOW based on HW paramters
  • From: Michael Wu <Michael.Wu@xxxxxxxxx>
• RE: [PATCH 1/2] i2c: designware: determine HS tHIGH and tLOW based on HW paramters
  • From: Michael Wu <Michael.Wu@xxxxxxxxx>
• Re: [PATCH v2 2/2] i2c: designware: Add a new ACPI HID for HJMC01 I2C controller
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH v5 3/6] dt-bindings: mfd: Add Realtek RTL9300 switch peripherals
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v5 3/6] dt-bindings: mfd: Add Realtek RTL9300 switch peripherals
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v2 1/1] i2c: qcom-geni: Support systems with 32MHz serial engine clock
  • From: Manikanta Mylavarapu <quic_mmanikan@xxxxxxxxxxx>
• Re: [PATCH v5 5/6] mips: dts: realtek: Add I2C controllers
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v5 4/6] mips: dts: realtek: Add syscon-reboot node
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v5 3/6] dt-bindings: mfd: Add Realtek RTL9300 switch peripherals
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v5 2/6] power: reset: syscon-reboot: Accept reg property
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v5 1/6] dt-bindings: reset: syscon-reboot: Add reg property
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v2 1/1] i2c: qcom-geni: Support systems with 32MHz serial engine clock
  • From: Mukesh Kumar Savaliya <quic_msavaliy@xxxxxxxxxxx>
• [PATCH v8 2/2] i2c: octeon: Add block-mode i2c operations
  • From: Aryan Srivastava <aryan.srivastava@xxxxxxxxxxxxxxxxxxx>
• [PATCH v8 1/2] i2c: octeon: refactor common i2c operations
  • From: Aryan Srivastava <aryan.srivastava@xxxxxxxxxxxxxxxxxxx>
• [PATCH v8 0/2] i2c: octeon: Add block-mode r/w
  • From: Aryan Srivastava <aryan.srivastava@xxxxxxxxxxxxxxxxxxx>
• [PATCH v2 1/2] ACPI: APD: Add clock frequency for HJMC01 I2C controller
  • From: "hunter.yu" <hunter.yu@xxxxxxxxxxxx>
• [PATCH v2 0/2] i2c: Add ACPI support for HJMC01
  • From: "hunter.yu" <hunter.yu@xxxxxxxxxxxx>
• [PATCH v2 2/2] i2c: designware: Add a new ACPI HID for HJMC01 I2C controller
  • From: "hunter.yu" <hunter.yu@xxxxxxxxxxxx>
• [PATCH v2 1/1] i2c: qcom-geni: Support systems with 32MHz serial engine clock
  • From: Manikanta Mylavarapu <quic_mmanikan@xxxxxxxxxxx>
• Re: [PATCH v7 1/2] i2c: octeon: refactor common i2c operations
  • From: Aryan Srivastava <Aryan.Srivastava@xxxxxxxxxxxxxxxxxxx>
• [PATCH v5 3/6] dt-bindings: mfd: Add Realtek RTL9300 switch peripherals
  • From: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
• [PATCH v5 6/6] i2c: Add driver for the RTL9300 I2C controller
  • From: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
• [PATCH v5 5/6] mips: dts: realtek: Add I2C controllers
  • From: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
• [PATCH v5 2/6] power: reset: syscon-reboot: Accept reg property
  • From: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
• [PATCH v5 1/6] dt-bindings: reset: syscon-reboot: Add reg property
  • From: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
• [PATCH v5 0/6] RTL9300 support for reboot and i2c
  • From: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
• [PATCH v5 4/6] mips: dts: realtek: Add syscon-reboot node
  • From: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v4 3/6] i2c: npcm: Modify timeout evaluation mechanism
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH v4 2/6] i2c: npcm: use a software flag to indicate a BER condition
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH v4 1/6] i2c: npcm: correct the read/write operation procedure
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH] i2c: xiic: Fix pm_runtime_set_suspended() with runtime pm enabled
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH] i2c: I2C_KEBA should depend on KEBA_CP500
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH v1 0/5] i2c: designware: Cleanups (part 4)
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• [PATCH v1 1/5] i2c: designware: Use temporary variable for struct device
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 5/5] i2c: designware: Fix spelling and other issues in the comments
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 3/5] i2c: designware: Remove 'cond' from i2c_dw_scl_hcnt()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 2/5] i2c: designware: Get rid of redundant 'else'
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 4/5] i2c: designware: Use sda_hold_time variable name everywhere
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 0/5] i2c: designware: Cleanups (part 4)
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] i2c: designware: determine HS tHIGH and tLOW based on HW paramters
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 2/2] dt-bindings: i2c: snps,designware-i2c: add bus-loading and clk-freq-optimized
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 1/2] i2c: designware: determine HS tHIGH and tLOW based on HW paramters
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] i2c: designware: determine HS tHIGH and tLOW based on HW paramters
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH v7 0/8] Introduce initial AMD ASF Controller driver support
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH 1/1] i2c: qcom-geni: add 32MHz I2C SE clock support for IPQ5424
  • From: Manikanta Mylavarapu <quic_mmanikan@xxxxxxxxxxx>
• Re: [PATCH 1/1] i2c: qcom-geni: add 32MHz I2C SE clock support for IPQ5424
  • From: Mukesh Kumar Savaliya <quic_msavaliy@xxxxxxxxxxx>
• Re: [PATCH v3 2/3] i2c: Add driver for the RTL9300 I2C controller
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH 1/2] i2c: designware: determine HS tHIGH and tLOW based on HW paramters
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] i2c: designware: determine HS tHIGH and tLOW based on HW paramters
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/1] i2c: qcom-geni: add 32MHz I2C SE clock support for IPQ5424
  • From: Manikanta Mylavarapu <quic_mmanikan@xxxxxxxxxxx>
• Re: [v1,1/1] i2c: mediatek: add runtime PM operations and bus regulator control
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• [PATCH 2/2] dt-bindings: i2c: snps,designware-i2c: add bus-loading and clk-freq-optimized
  • From: Michael Wu <michael.wu@xxxxxxxxx>
• [PATCH 1/2] i2c: designware: determine HS tHIGH and tLOW based on HW paramters
  • From: Michael Wu <michael.wu@xxxxxxxxx>
• [PATCH 0/2] Compute HS HCNT and LCNT based on HW parameters
  • From: Michael Wu <michael.wu@xxxxxxxxx>
• Re: [PATCH v7 8/8] MAINTAINERS: Add AMD ASF driver entry
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH 1/1] i2c: qcom-geni: add 32MHz I2C SE clock support for IPQ5424
  • From: Mukesh Kumar Savaliya <quic_msavaliy@xxxxxxxxxxx>
• Re: [PATCH v3 1/3] dt-bindings: i2c: Add RTL9300 I2C controller
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 1/1] i2c: qcom-geni: add 32MHz I2C SE clock support for IPQ5424
  • From: Manikanta Mylavarapu <quic_mmanikan@xxxxxxxxxxx>
• Re: [PATCH 1/1] i2c: qcom-geni: add 32MHz I2C SE clock support for IPQ5424
  • From: Manikanta Mylavarapu <quic_mmanikan@xxxxxxxxxxx>
• Re: [PATCH 1/1] i2c: qcom-geni: add 32MHz I2C SE clock support for IPQ5424
  • From: Vladimir Zapolskiy <vladimir.zapolskiy@xxxxxxxxxx>
• Re: [PATCH] nvmem: core: Check read_only flag for force_ro in bin_attr_nvmem_write()
  • From: Marek Vasut <marex@xxxxxxx>
• Re: [PATCH v3 3/3] mips: dts: realtek: Add I2C controllers
  • From: Chris Packham <Chris.Packham@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 1/3] dt-bindings: i2c: Add RTL9300 I2C controller
  • From: Chris Packham <Chris.Packham@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/1] i2c: qcom-geni: add 32MHz I2C SE clock support for IPQ5424
  • From: Bjorn Andersson <quic_bjorande@xxxxxxxxxxx>
• Re: [PATCH] i2c: I2C_KEBA should depend on KEBA_CP500
  • From: Gerhard Engleder <gerhard@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PULL REQUEST] i2c-for-6.12-rc1
  • From: Linus Torvalds <torvalds@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v4 4/8] drm/bridge: hotplug-bridge: add driver to support hot-pluggable DSI bridges
  • From: Luca Ceresoli <luca.ceresoli@xxxxxxxxxxx>
• Re: [PATCH] i2c: i801: Add support for Intel Panther Lake
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PULL REQUEST] i2c-for-6.12-rc1
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [PULL REQUEST] i2c-for-6.12-rc1
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• [PATCH] i2c: I2C_KEBA should depend on KEBA_CP500
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• Re: [PATCH v3 1/3] dt-bindings: i2c: Add RTL9300 I2C controller
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v3 3/3] mips: dts: realtek: Add I2C controllers
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v3 1/3] dt-bindings: i2c: Add RTL9300 I2C controller
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [v1,1/1] i2c: mediatek: add runtime PM operations and bus regulator control
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• Re: [PATCH v2 1/3] dt-bindings: i2c: Add RTL9300 I2C controller
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH 1/1] i2c: qcom-geni: add 32MHz I2C SE clock support for IPQ5424
  • From: Manikanta Mylavarapu <quic_mmanikan@xxxxxxxxxxx>
• [PATCH v3 2/3] i2c: Add driver for the RTL9300 I2C controller
  • From: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
• [PATCH v3 0/3] i2c: RTL9300 support
  • From: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
• [PATCH v3 1/3] dt-bindings: i2c: Add RTL9300 I2C controller
  • From: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
• [PATCH v3 3/3] mips: dts: realtek: Add I2C controllers
  • From: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
• Re: [PULL REQUEST] i2c-for-6.12-rc1
  • From: pr-tracker-bot@xxxxxxxxxx
• Re: [PULL REQUEST] i2c-for-6.12-rc1
  • From: Linus Torvalds <torvalds@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v7 4/8] i2c: amd-asf: Add ACPI support for AMD ASF Controller
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH v2 1/3] dt-bindings: i2c: Add RTL9300 I2C controller
  • From: Chris Packham <Chris.Packham@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v7 08/10] i2c: of-prober: Add GPIO support to simple helpers
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH] i2c/synquacer: Deal with optional PCLK correctly
  • From: Ard Biesheuvel <ardb@xxxxxxxxxx>
• [PATCH] i2c: i801: Add support for Intel Panther Lake
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH v7 4/8] i2c: amd-asf: Add ACPI support for AMD ASF Controller
  • From: Shyam Sundar S K <Shyam-sundar.S-k@xxxxxxx>
• Re: [PATCH v7 4/8] i2c: amd-asf: Add ACPI support for AMD ASF Controller
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v4 4/6] i2c: npcm: Modify the client address assignment
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v7 8/8] MAINTAINERS: Add AMD ASF driver entry
  • From: Shyam Sundar S K <Shyam-sundar.S-k@xxxxxxx>
• [PATCH v7 6/8] i2c: amd-asf: Add routine to handle the ASF slave process
  • From: Shyam Sundar S K <Shyam-sundar.S-k@xxxxxxx>
• [PATCH v7 4/8] i2c: amd-asf: Add ACPI support for AMD ASF Controller
  • From: Shyam Sundar S K <Shyam-sundar.S-k@xxxxxxx>
• [PATCH v7 7/8] i2c: amd-asf: Clear remote IRR bit to get successive interrupt
  • From: Shyam Sundar S K <Shyam-sundar.S-k@xxxxxxx>
• [PATCH v7 3/8] i2c: piix4: Export i2c_piix4 driver functions as library
  • From: Shyam Sundar S K <Shyam-sundar.S-k@xxxxxxx>
• [PATCH v7 5/8] i2c: amd-asf: Add i2c_algorithm operations to support AMD ASF with SMBus
  • From: Shyam Sundar S K <Shyam-sundar.S-k@xxxxxxx>
• [PATCH v7 2/8] i2c: piix4: Move i2c_piix4 macros and structures to common header
  • From: Shyam Sundar S K <Shyam-sundar.S-k@xxxxxxx>
• [PATCH v7 1/8] i2c: piix4: Change the parameter list of piix4_transaction function
  • From: Shyam Sundar S K <Shyam-sundar.S-k@xxxxxxx>
• [PATCH v7 0/8] Introduce initial AMD ASF Controller driver support
  • From: Shyam Sundar S K <Shyam-sundar.S-k@xxxxxxx>
• [PULL REQUEST] i2c-for-6.12-rc1
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• Re: [PATCH v6 8/8] MAINTAINERS: Add AMD ASF driver entry
  • From: Shyam Sundar S K <Shyam-sundar.S-k@xxxxxxx>
• [PATCH] i2c: xiic: Fix pm_runtime_set_suspended() with runtime pm enabled
  • From: Jinjie Ruan <ruanjinjie@xxxxxxxxxx>
• Re: [PATCH v4 4/6] i2c: npcm: Modify the client address assignment
  • From: Tyrone Ting <warp5tw@xxxxxxxxx>
• Re: [PATCH v4 1/6] i2c: npcm: correct the read/write operation procedure
  • From: Tyrone Ting <warp5tw@xxxxxxxxx>
• Re: [PATCH v2 1/3] dt-bindings: hwmon: pmbus: add ti tps25990 support
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH v2 1/3] dt-bindings: i2c: Add RTL9300 I2C controller
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [GIT PULL] i2c-host for v6.12
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/3] dt-bindings: i2c: Add RTL9300 I2C controller
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [PATCH v6 7/8] i2c: amd-asf: Clear remote IRR bit to get successive interrupt
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v6 6/8] i2c: amd-asf: Add routine to handle the ASF slave process
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v6 5/8] i2c: amd-asf: Add i2c_algorithm operations to support AMD ASF with SMBus
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 3/3] hwmon: (pmbus/tps25990): add initial support
  • From: Jerome Brunet <jbrunet@xxxxxxxxxxxx>
• [PATCH v2 2/3] hwmon: (pmbus/core) clear faults after setting smbalert mask
  • From: Jerome Brunet <jbrunet@xxxxxxxxxxxx>
• [PATCH v2 1/3] dt-bindings: hwmon: pmbus: add ti tps25990 support
  • From: Jerome Brunet <jbrunet@xxxxxxxxxxxx>
• [PATCH v2 0/3] hwmon: pmbus: add tps25990 efuse support
  • From: Jerome Brunet <jbrunet@xxxxxxxxxxxx>
• Re: [PATCH v6 4/8] i2c: amd-asf: Add ACPI support for AMD ASF Controller
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v6 3/8] i2c: piix4: Export i2c_piix4 driver functions as library
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v6 8/8] MAINTAINERS: Add AMD ASF driver entry
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 4/5] watchdog: Congatec Board Controller watchdog timer driver
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [v1,1/1] i2c: mediatek: add runtime PM operations and bus regulator control
  • From: "zoie.lin" <zoie.lin@xxxxxxxxxxxx>
• [v1,0/1] i2c: mediatek: add runtime PM operations and bus regulator control
  • From: "zoie.lin" <zoie.lin@xxxxxxxxxxxx>
• Re: [PATCH v4 4/6] i2c: npcm: Modify the client address assignment
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v4 1/6] i2c: npcm: correct the read/write operation procedure
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• imx8mm - sbs-battery problem
  • From: "Weber, Thomas" <Thomas.Weber@xxxxxxxxxxxxxx>
• Re: [PATCH v4 6/8] backlight: led-backlight: add devlink to supplier LEDs
  • From: Luca Ceresoli <luca.ceresoli@xxxxxxxxxxx>
• [PATCH v4 6/6] i2c: npcm: Enable slave in eob interrupt
  • From: warp5tw@xxxxxxxxx
• [PATCH v4 5/6] i2c: npcm: use i2c frequency table
  • From: warp5tw@xxxxxxxxx
• [PATCH v4 4/6] i2c: npcm: Modify the client address assignment
  • From: warp5tw@xxxxxxxxx
• [PATCH v4 3/6] i2c: npcm: Modify timeout evaluation mechanism
  • From: warp5tw@xxxxxxxxx
• [PATCH v4 2/6] i2c: npcm: use a software flag to indicate a BER condition
  • From: warp5tw@xxxxxxxxx
• [PATCH v4 1/6] i2c: npcm: correct the read/write operation procedure
  • From: warp5tw@xxxxxxxxx
• [PATCH v4 0/6] i2c: npcm: read/write operation, checkpatch
  • From: warp5tw@xxxxxxxxx
• RE: [PATCH v11] i2c: designware: fix controller is holding SCL low while ENABLE bit is disabled
  • From: Liu Kimriver/刘金河 <kimriver.liu@xxxxxxxxxxxx>
• Re: [PATCH] i2c/synquacer: Deal with optional PCLK correctly
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH v11] i2c: designware: fix controller is holding SCL low while ENABLE bit is disabled
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• [PATCH v2 1/3] dt-bindings: i2c: Add RTL9300 I2C controller
  • From: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
• [PATCH v2 2/3] i2c: Add driver for the RTL9300 I2C controller
  • From: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
• [PATCH v2 0/3] i2c: RTL9300 support
  • From: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
• [PATCH v2 3/3] mips: dts: realtek: Add I2C controllers
  • From: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v6 2/8] i2c: piix4: Move i2c_piix4 macros and structures to common header
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v5 4/8] i2c: amd-asf: Add ACPI support for AMD ASF Controller
  • From: kernel test robot <lkp@xxxxxxxxx>
• [PATCH v6 8/8] MAINTAINERS: Add AMD ASF driver entry
  • From: Shyam Sundar S K <Shyam-sundar.S-k@xxxxxxx>
• [PATCH v6 7/8] i2c: amd-asf: Clear remote IRR bit to get successive interrupt
  • From: Shyam Sundar S K <Shyam-sundar.S-k@xxxxxxx>
• [PATCH v6 6/8] i2c: amd-asf: Add routine to handle the ASF slave process
  • From: Shyam Sundar S K <Shyam-sundar.S-k@xxxxxxx>
• [PATCH v6 5/8] i2c: amd-asf: Add i2c_algorithm operations to support AMD ASF with SMBus
  • From: Shyam Sundar S K <Shyam-sundar.S-k@xxxxxxx>
• [PATCH v6 4/8] i2c: amd-asf: Add ACPI support for AMD ASF Controller
  • From: Shyam Sundar S K <Shyam-sundar.S-k@xxxxxxx>
• [PATCH v6 3/8] i2c: piix4: Export i2c_piix4 driver functions as library
  • From: Shyam Sundar S K <Shyam-sundar.S-k@xxxxxxx>
• [PATCH v6 0/8] Introduce initial AMD ASF Controller driver support
  • From: Shyam Sundar S K <Shyam-sundar.S-k@xxxxxxx>
• [PATCH v6 2/8] i2c: piix4: Move i2c_piix4 macros and structures to common header
  • From: Shyam Sundar S K <Shyam-sundar.S-k@xxxxxxx>
• [PATCH v6 1/8] i2c: piix4: Change the parameter list of piix4_transaction function
  • From: Shyam Sundar S K <Shyam-sundar.S-k@xxxxxxx>
• Re: [PULL REQUEST] i2c-for-6.11-final-but-missed-it
  • From: pr-tracker-bot@xxxxxxxxxx
• Re: [PATCH 2/2] i2c: designware: Add a new ACPI HID for HJMC01 I2C controller
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] ACPI: APD: Add clock frequency for HJMC01 I2C controller
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v4 6/8] backlight: led-backlight: add devlink to supplier LEDs
  • From: Daniel Thompson <daniel.thompson@xxxxxxxxxx>
• Re: [PATCH 2/2] i2c: designware: Add a new ACPI HID for HJMC01 I2C controller
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
• [PATCH 2/2] i2c: designware: Add a new ACPI HID for HJMC01 I2C controller
  • From: hunter.yu@xxxxxxxxxxxx
• [PULL REQUEST] i2c-for-6.11-final-but-missed-it
  • From: Wolfram Sang <wsa@xxxxxxxxxx>
• [PATCH 1/2] ACPI: APD: Add clock frequency for HJMC01 I2C controller
  • From: hunter.yu@xxxxxxxxxxxx
• Re: [PATCH 5/5] i2c: rtl9300: Add multiplexing support
  • From: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 5/5] i2c: rtl9300: Add multiplexing support
  • From: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/5] i2c: Add driver for the RTL9300 I2C controller
  • From: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v5 3/8] i2c: piix4: Export i2c_piix4 driver functions as library
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH 1/5] dt-bindings: i2c: Add RTL9300 I2C controller
  • From: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 5/5] i2c: rtl9300: Add multiplexing support
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH 2/5] i2c: Add driver for the RTL9300 I2C controller
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH v4 6/9] dt-bindings: watchdog: Add rockchip,rk3576-wdt compatible
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [PATCH 4/5] dt-bindings: i2c: Add RTL9300 I2C multiplexer
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 1/5] dt-bindings: i2c: Add RTL9300 I2C controller
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v5 7/8] i2c: amd-asf: Clear remote IRR bit to get successive interrupt
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 4/4] i2c: i2c-qcom-geni: Enable i2c controller sharing between two subsystems
  • From: Mukesh Kumar Savaliya <quic_msavaliy@xxxxxxxxxxx>
• Re: [PATCH v5 7/8] i2c: amd-asf: Clear remote IRR bit to get successive interrupt
  • From: Shyam Sundar S K <Shyam-sundar.S-k@xxxxxxx>
• Re: [PATCH v5 5/8] i2c: amd-asf: Add i2c_algorithm operations to support AMD ASF with SMBus
  • From: Shyam Sundar S K <Shyam-sundar.S-k@xxxxxxx>
• Re: [PATCH v5 3/8] i2c: piix4: Export i2c_piix4 driver functions as library
  • From: Shyam Sundar S K <Shyam-sundar.S-k@xxxxxxx>
• Re: [PATCH v5 7/8] i2c: amd-asf: Clear remote IRR bit to get successive interrupt
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v5 6/8] i2c: amd-asf: Add routine to handle the ASF slave process
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v5 5/8] i2c: amd-asf: Add i2c_algorithm operations to support AMD ASF with SMBus
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v5 3/8] i2c: piix4: Export i2c_piix4 driver functions as library
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 4/5] dt-bindings: i2c: Add RTL9300 I2C multiplexer
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [PATCH 1/5] dt-bindings: i2c: Add RTL9300 I2C controller
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• [PATCH 5/5] i2c: rtl9300: Add multiplexing support
  • From: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
• [PATCH 2/5] i2c: Add driver for the RTL9300 I2C controller
  • From: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
• [PATCH 3/5] mips: dts: realtek: Add I2C controllers
  • From: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
• [PATCH 1/5] dt-bindings: i2c: Add RTL9300 I2C controller
  • From: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
• [PATCH 4/5] dt-bindings: i2c: Add RTL9300 I2C multiplexer
  • From: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
• [PATCH 0/5] i2c: RTL9300 support
  • From: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/5] gpio: Congatec Board Controller gpio driver
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v5 7/8] i2c: amd-asf: Clear remote IRR bit to get successive interrupt
  • From: Shyam Sundar S K <Shyam-sundar.S-k@xxxxxxx>
• Re: [PATCH v5 6/8] i2c: amd-asf: Add routine to handle the ASF slave process
  • From: Shyam Sundar S K <Shyam-sundar.S-k@xxxxxxx>
• Re: [PATCH v5 5/8] i2c: amd-asf: Add i2c_algorithm operations to support AMD ASF with SMBus
  • From: Shyam Sundar S K <Shyam-sundar.S-k@xxxxxxx>
• Re: [PATCH v5 3/8] i2c: piix4: Export i2c_piix4 driver functions as library
  • From: Shyam Sundar S K <Shyam-sundar.S-k@xxxxxxx>
• Re: [PATCH v5 0/8] Introduce initial AMD ASF Controller driver support
  • From: Shyam Sundar S K <Shyam-sundar.S-k@xxxxxxx>
• [PATCH v2 5/5] MAINTAINERS: Add entry for Congatec Board Controller
  • From: Thomas Richard <thomas.richard@xxxxxxxxxxx>
• [PATCH v2 3/5] i2c: Congatec Board Controller i2c bus driver
  • From: Thomas Richard <thomas.richard@xxxxxxxxxxx>
• [PATCH v2 4/5] watchdog: Congatec Board Controller watchdog timer driver
  • From: Thomas Richard <thomas.richard@xxxxxxxxxxx>
• [PATCH v2 2/5] gpio: Congatec Board Controller gpio driver
  • From: Thomas Richard <thomas.richard@xxxxxxxxxxx>
• [PATCH v2 1/5] mfd: add Congatec Board Controller mfd driver
  • From: Thomas Richard <thomas.richard@xxxxxxxxxxx>
• [PATCH v2 0/5] Congatec Board Controller drivers
  • From: Thomas Richard <thomas.richard@xxxxxxxxxxx>
• Re: [PATCH v4 1/8] dt-bindings: connector: add GE SUNH hotplug addon connector
  • From: Luca Ceresoli <luca.ceresoli@xxxxxxxxxxx>
• Re: [PATCH v2 5/7] RISC-V: configs: enable I2C_DESIGNWARE_CORE with I2C_DESIGNWARE_PLATFORM
  • From: Palmer Dabbelt <palmer@xxxxxxxxxxx>
• Re: [PATCH v7 08/10] i2c: of-prober: Add GPIO support to simple helpers
  • From: Chen-Yu Tsai <wenst@xxxxxxxxxxxx>
• Query regarding i2c-scmi not creating the right adapter
  • From: Andrea Costanzo <andrea.costanzo@xxxxxxxxxxx>
• Re: [PATCH v4 1/8] dt-bindings: connector: add GE SUNH hotplug addon connector
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• [PATCH v4 5/8] i2c: i2c-core-of: follow i2c-parent phandle to probe devices from added nodes
  • From: Luca Ceresoli <luca.ceresoli@xxxxxxxxxxx>
• [PATCH v4 8/8] misc: add ge-addon-connector driver
  • From: Luca Ceresoli <luca.ceresoli@xxxxxxxxxxx>
• [PATCH v4 2/8] drm/bridge: allow bridges to be informed about added and removed bridges
  • From: Luca Ceresoli <luca.ceresoli@xxxxxxxxxxx>
• [PATCH RFC v4 7/8] driver core: devlink: do not unblock consumers without any drivers found
  • From: Luca Ceresoli <luca.ceresoli@xxxxxxxxxxx>
• [PATCH v4 6/8] backlight: led-backlight: add devlink to supplier LEDs
  • From: Luca Ceresoli <luca.ceresoli@xxxxxxxxxxx>
• [PATCH v4 4/8] drm/bridge: hotplug-bridge: add driver to support hot-pluggable DSI bridges
  • From: Luca Ceresoli <luca.ceresoli@xxxxxxxxxxx>
• [PATCH v4 3/8] drm/encoder: add drm_encoder_cleanup_from()
  • From: Luca Ceresoli <luca.ceresoli@xxxxxxxxxxx>
• [PATCH v4 1/8] dt-bindings: connector: add GE SUNH hotplug addon connector
  • From: Luca Ceresoli <luca.ceresoli@xxxxxxxxxxx>
• [PATCH v4 0/8] Add support for GE SUNH hot-pluggable connector
  • From: Luca Ceresoli <luca.ceresoli@xxxxxxxxxxx>
• Re: [PATCH 1/5] mfd: add Congatec Board Controller mfd driver
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH] i2c: qcom-geni: Keep comment why interrupts start disabled
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH v7 09/10] platform/chrome: Introduce device tree hardware prober
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v7 06/10] i2c: Introduce OF component probe function
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v7 09/10] platform/chrome: Introduce device tree hardware prober
  • From: Chen-Yu Tsai <wenst@xxxxxxxxxxxx>
• Re: [PATCH v7 06/10] i2c: Introduce OF component probe function
  • From: Chen-Yu Tsai <wenst@xxxxxxxxxxxx>
• Re: [PATCH v2 00/11] i2c: isch: Put the driver into shape
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH v7 06/10] i2c: Introduce OF component probe function
  • From: Chen-Yu Tsai <wenst@xxxxxxxxxxxx>
• Re: [PATCH v7 06/10] i2c: Introduce OF component probe function
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH] i2c: qcom-geni: Keep comment why interrupts start disabled
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH] i2c: qcom-geni: Keep comment why interrupts start disabled
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [GIT PULL] i2c-host-fixes for v6.11-rc8
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [GIT PULL] i2c-host-fixes for v6.11-rc8
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH] i2c: qcom-geni: Keep comment why interrupts start disabled
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• [PATCH] i2c: qcom-geni: Keep comment why interrupts start disabled
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [GIT PULL] i2c-host-fixes for v6.11-rc8
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v1 04/12] i2c: isch: Switch to memory mapped IO accessors
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 10/11] i2c: isch: Prefer to use octal permission
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 05/11] i2c: isch: switch i2c registration to devm functions
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 06/11] i2c: isch: Utilize temporary variable to hold device pointer
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 01/11] i2c: isch: Pass pointer to struct i2c_adapter down
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 08/11] i2c: isch: Unify the name of the variable to hold an error code
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 07/11] i2c: isch: Use read_poll_timeout()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 11/11] i2c: isch: Convert to kernel-doc
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 09/11] i2c: isch: Don't use "proxy" headers
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 02/11] i2c: isch: Use string_choices API instead of ternary operator
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 04/11] i2c: isch: Use custom private data structure
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 00/11] i2c: isch: Put the driver into shape
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 03/11] i2c: isch: Switch to memory mapped IO accessors
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v1 04/12] i2c: isch: Switch to memory mapped IO accessors
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH v7 06/10] i2c: Introduce OF component probe function
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v7 06/10] i2c: Introduce OF component probe function
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [no subject]
  • From: Unknown
• Re: [PATCH v1 04/12] i2c: isch: Switch to memory mapped IO accessors
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v7 06/10] i2c: Introduce OF component probe function
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v1 04/12] i2c: isch: Switch to memory mapped IO accessors
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH v1 04/12] i2c: isch: Switch to memory mapped IO accessors
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 00/21] Adding support of ADI ARMv8 ADSP-SC598 SoC.
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: hwmon: pmbus: add ti tps25990 documentation
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 15/21] i2c: Add driver for ADI ADSP-SC5xx platforms
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 19/21] arm64: dts: adi: sc598: add device tree
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 20/21] arm64: defconfig: sc598 add minimal changes
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 00/21] Adding support of ADI ARMv8 ADSP-SC598 SoC.
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 12/21] dt-bindings: irqchip: adi,adsp-pint: add binding
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 11/21] irqchip: Add irqchip for ADI ADSP-SC5xx platform
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 10/21] dt-bindings: gpio: adi,adsp-port-gpio: add bindings
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 09/21] gpio: add driver for ADI ADSP-SC5xx platform
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 06/21] include: dt-binding: clock: add adi clock header file
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 06/21] include: dt-binding: clock: add adi clock header file
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 05/21] clock:Add driver for ADI ADSP-SC5xx PLL
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 04/21] dt-bindings: arm64: adi,sc598: Add ADSP-SC598 SoC bindings
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 03/21] dt-bindigs: arm64: adi,sc598 bindings
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 01/21] arm64: Add ADI ADSP-SC598 SoC
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v3 6/6] i2c: npcm: Enable slave in eob interrupt
  • From: Tyrone Ting <warp5tw@xxxxxxxxx>
• Re: [PATCH v3 5/6] i2c: npcm: use i2c frequency table
  • From: Tyrone Ting <warp5tw@xxxxxxxxx>
• Re: [PATCH v3 4/6] i2c: npcm: Modify the client address assignment
  • From: Tyrone Ting <warp5tw@xxxxxxxxx>
• Re: [PATCH v3 0/6] i2c: npcm: Bug fixes read/write operation, checkpatch
  • From: Tyrone Ting <warp5tw@xxxxxxxxx>
• Re: [PATCH v3 0/6] i2c: npcm: Bug fixes read/write operation, checkpatch
  • From: Tyrone Ting <warp5tw@xxxxxxxxx>
• Re: [PATCH v7 06/10] i2c: Introduce OF component probe function
  • From: Chen-Yu Tsai <wenst@xxxxxxxxxxxx>
• Re: [PATCH v7 06/10] i2c: Introduce OF component probe function
  • From: Chen-Yu Tsai <wenst@xxxxxxxxxxxx>
• Re: [PATCH v7 06/10] i2c: Introduce OF component probe function
  • From: Andrey Skvortsov <andrej.skvortzov@xxxxxxxxx>
• Re: [PATCH v7 08/10] i2c: of-prober: Add GPIO support to simple helpers
  • From: Andrey Skvortsov <andrej.skvortzov@xxxxxxxxx>
• Re: [PATCH v5 00/11] i2c: riic: Add support for Renesas RZ/G3S
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 01/21] arm64: Add ADI ADSP-SC598 SoC
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 01/21] arm64: Add ADI ADSP-SC598 SoC
  • From: Markus Elfring <Markus.Elfring@xxxxxx>
• Re: [PATCH 09/21] gpio: add driver for ADI ADSP-SC5xx platform
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH 07/21] clock: Add driver for ADI ADSP-SC5xx clock
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v1 04/12] i2c: isch: Switch to memory mapped IO accessors
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH 13/21] pinctrl: Add drivers for ADI ADSP-SC5xx platform
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v1 04/12] i2c: isch: Switch to memory mapped IO accessors
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v7 08/10] i2c: of-prober: Add GPIO support to simple helpers
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH v7 09/10] platform/chrome: Introduce device tree hardware prober
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH v7 07/10] i2c: of-prober: Add simple helpers for regulator support
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH v7 06/10] i2c: Introduce OF component probe function
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH v5 4/8] i2c: amd-asf: Add ACPI support for AMD ASF Controller
  • From: kernel test robot <lkp@xxxxxxxxx>