On Fri, 01 Nov 2024 09:03:47 +1300, Chris Packham wrote:
> Add device tree schema for the Realtek RTL9300 switches. The RTL9300
> family is made up of the RTL9301, RTL9302B, RTL9302C and RTL9303. These
> have the same SoC differ in the Ethernet switch/SERDES arrangement.
>
> Currently the only supported features are the syscon-reboot and i2c
> controllers. The syscon-reboot is needed to be able to reboot the board.
> The I2C controllers are slightly unusual because they each own an SCL
> pin (GPIO8 for the first controller, GPIO 17 for the second) but have 8
> common SDA pins which can be assigned to either controller (but not
> both).
>
> [...]
Applied, thanks!
[4/7] dt-bindings: mfd: Add Realtek RTL9300 switch peripherals
commit: 0c64e7496717779ff60249d5aafd5c18aceee982
--
Lee Jones [李琼斯]
